Environmental Test Chamber
Filter
Showing 3121–3150 of 3643 results
| Brand | SuYing |
|---|---|
| Model | GDW-100 / GDW-250 / GDW-500 / GDW-800 / GDW-1000 |
| Temperature Range | A: −20°C to +150°C |
| B | −40°C to +150°C |
| C | −60°C to +150°C |
| D | −70°C to +150°C |
| Temperature Uniformity | ≤ ±2°C |
| Temperature Fluctuation | ≤ ±0.5°C |
| Heating Rate | −20°C → +100°C in ≈35 min (A) |
| Cooling Rate | +25°C → −40°C in ≈50 min (B) |
| Internal Dimensions (D×W×H, mm) | 450×450×500 |
| External Dimensions (D×W×H, mm) | 1150×450×500 |
| Power Supply | AC 380 V ±10%, 50 ±0.5 Hz, 3-phase 5-wire |
| Safety Protection | Over-temperature, over-current, compressor high-pressure, motor overload, leakage, short-circuit, and phase-failure protection |
| Brand | SuYing |
|---|---|
| Origin | Shanghai, China |
| Model | GDW-100 / GDW-250 / GDW-500 |
| Temperature Range Options | A: −20°C to +150°C |
| B | −40°C to +150°C |
| C | −60°C to +150°C |
| D | −70°C to +150°C |
| Temperature Uniformity | ≤ ±2°C |
| Temperature Fluctuation | ≤ ±0.5°C |
| Heating Rate (−20°C → 100°C) | ~35 min |
| Cooling Rate (25°C → −40°C) | ~50 min |
| Internal Dimensions (GDW-500) | 800 × 700 × 900 mm (D×W×H) |
| External Dimensions (GDW-500) | 1280 × 1350 × 2100 mm (D×W×H) |
| Power Supply | AC 380 V ±10%, 50 ±0.5 Hz, 3-phase 5-wire |
| Refrigeration System | French Tecumseh hermetic compressor (single-stage or cascade configuration) |
| Control System | Imported PID microprocessor-based digital controller with ±0.1°C setpoint/indication resolution |
| Safety Protections | Over-temperature, over-current, motor overload, refrigerant high-pressure, leakage, and short-circuit protection |
| Compliance Standards | GB/T 2423.1–2001, GB/T 2423.2–2001, GB 10589–1989, GB 10592–1989, GB 11158–1989, GB/T 5170.2–1996 |
| Brand | Suying |
|---|---|
| Origin | Shanghai, China |
| Model | GSJ-100 / GSJ-250 / GSJ-500 / GSJ-1000 |
| Temperature Range | -20°C to 150°C (A), -40°C to 150°C (B), -60°C to 150°C (C), -70°C to 150°C (D) |
| Humidity Range | 20–98% RH |
| Temp. Uniformity | ≤±2°C |
| Temp. Stability | ≤±0.5°C |
| Humidity Stability | ±2.5% RH |
| Heating Rate | -20°C → 100°C in ~35 min |
| Cooling Rate | 25°C → -40°C in ~50 min |
| Internal Dimensions (W×D×H, mm) | 450×450×500 (GSJ-100) to 1000×1000×1000 (GSJ-1000) |
| External Dimensions (W×D×H, mm) | 1150×450×500 to 1650×1480×2200 |
| Power Supply | AC 380V ±10%, 50 ±0.5 Hz, 3-phase 5-wire |
| Compliance | GB/T 2423.1–2001, GB/T 2423.2–2001 |
| Controller | Imported PID-based microprocessor with touch interface, data logging capability, optional RS485/USB for PC connectivity and printer output |
| Brand | Suying |
|---|---|
| Origin | Shanghai, China |
| Model | GWS-100 / GWS-250 / GWS-500 / GWS-1000 |
| Temperature Range | +50°C to +95°C |
| Humidity Range | 80% to 98% RH |
| Temperature Uniformity | ≤ ±2.0°C |
| Temperature Fluctuation | ≤ ±0.5°C |
| Humidity Deviation | ±2.0% RH (±2% RH upper, −3% RH lower) |
| Temperature Sensor | Platinum Resistance Thermometer (PT100) |
| Controller | Imported Digital PID Temperature & Humidity Controller with Auto-Tuning |
| Internal Volume | 100 L / 250 L / 500 L / 1000 L |
| Power Supply | AC 220 V, 50 Hz |
| Max. Power Consumption | 2.0 kW (GWS-100) / 3.0 kW (GWS-250) |
| Operating Ambient Temperature | +5°C to +35°C |
| Compliance | ISO 6270-2, DIN 50018, IEC 60068-3-5, GB/T 10586, GB/T 10589, GB/T 11158, IEC 61730-2, IEC 61215, GMW 14729-B, GMW 14124 (Cycles A/C/D/E/G/J/K/O/U/V), TL 226 3.11.1 |
| Brand | Suying |
|---|---|
| Origin | Shanghai, China |
| Model | HQ-500 |
| Temperature Range | RT+10°C to 250°C |
| Temperature Uniformity | ±2°C |
| Temperature Fluctuation | ±0.5°C |
| Air Exchange Rate | 3–20 air changes/hour (adjustable) |
| Internal Chamber Dimensions (W×H×D) | 800×900×700 mm |
| Control System | LED-display microcomputer PID controller with AT self-tuning and SSR output |
| Temperature Sensor | PT100 platinum resistance thermometer |
| Air Exchange Mechanism | Motorized, adjustable damper-based system (patented design ZL201721135485.0) |
| Safety Protections | Over-temperature, phase failure/reverse-phase, motor overheat, timer, and overload protection |
| Compliance | JB/T 7444, GB/T 3512–2014, ISO 188:2011, GB/T 2423.2–2001, GB/T 2423.3–1993 |
| Calibration Reference | JJF 1001–2003 (Temperature) |
| Brand | SuYing |
|---|---|
| Origin | Shanghai, China |
| Model | LRCJ-100 / LRCJ-200 / LRCJ-500 |
| Temperature Range (A/B/C) | -20°C to 200°C / -40°C to 200°C / -60°C to 200°C |
| Temperature Transition Time | ≤15 s |
| Temperature Recovery Time | ≤5 min |
| Sample Zone Temp. Uniformity | ±0.5°C (at steady state) |
| Sample Load Capacity | 20 kg / 30 kg / 50 kg |
| Controller | OYO dual-loop LCD touch-panel temperature controller |
| Compliance | GB/T 2423.1–2, GB 10592–1989, GJB 150A–2009 |
| Refrigerants | R404A (high-stage), R23 (low-stage) |
| Cooling Method | Air-cooled binary cascade refrigeration system |
| Brand | Suying |
|---|---|
| Origin | Shanghai, China |
| Model Series | PH-100 / PH-250 / PH-500 / PH-1000 |
| Temperature Range | RT+10°C to 300°C |
| Max Operating Temperature | 300°C |
| Temperature Uniformity | ±2°C |
| Temperature Fluctuation | ±0.5°C |
| Temperature Deviation | ±2°C |
| Control Accuracy | ±0.1°C |
| Construction | Interior – AISI 304 stainless steel (TIG-welded) |
| Air Circulation | Dual-axis forced convection (horizontal + vertical) with adjustable multi-blade centrifugal fan |
| Controller | Microprocessor-based PID controller with over-temperature deviation protection and real-time digital display |
| Sealing | High-temperature silicone gasket (rated to 350°C) |
| Safety Compliance | Meets IEC 60068-2-2 (Test B: Dry Heat), GB/T 2423.2, and JIS C 60068-2-2 |
| Brand | Suying |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Models | PH-100 / PH-250 / PH-500 / PH-1000 |
| Price Range | USD 1,400–14,000 (FOB Shanghai) |
| Max Operating Temperature | 250 °C / 300 °C (model-dependent) |
| Temperature Uniformity | ±0.5 °C |
| Control Accuracy | ±0.1 °C |
| Working Chamber Volume | 100 L to 1000 L |
| Ambient Start Temperature | RT+10 °C |
| Construction | Interior – 304 Stainless Steel (TIG-welded) |
| Air Circulation | Dual-axis forced convection (horizontal + vertical), adjustable multi-blade centrifugal fan |
| Controller | Fuji P.I.D. microprocessor-based digital temperature controller with over-temperature deviation protection |
| Sealing | High-temp silicone gasket (rated to 350 °C) |
| Safety Compliance | Meets GB/T 5170.2–2017 (Chinese national standard for temperature test equipment), compatible with ISO 17025 laboratory environmental control requirements |
| Brand | Suying |
|---|---|
| Origin | Shanghai, China |
| Model | SY-100 |
| Temperature Range | 10–100 °C |
| Humidity Range | 20–98% RH |
| Temperature Uniformity | ±1.5 °C |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Uniformity | ±3% RH |
| Humidity Fluctuation | ±2% RH |
| Brand | Suying |
|---|---|
| Origin | Shanghai, China |
| Model | SY-150L |
| Temperature Range | 10–100 °C |
| Humidity Range | 20–98 %RH |
| Temperature Uniformity | ±1.5 °C |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Uniformity | ±3 %RH |
| Humidity Fluctuation | ±2 %RH |
| Brand | Suying |
|---|---|
| Origin | Shanghai, China |
| Model | SY-500 |
| Chamber Volume | 500 L |
| Construction | Cold-Rolled Steel Exterior with Electrostatic Powder Coating |
| Interior | SUS304B Stainless Steel (1.5 mm Thickness) |
| Insulation | Rigid Polyurethane Foam + Fine Glass Wool |
| Temperature Range | −70 °C to +180 °C |
| Temperature Uniformity | ±0.5 °C (at steady state, per IEC 60068-3-5) |
| Temperature Ramp Rate | ≥3 °C/min (average, 20 °C to −40 °C |
| Humidity Range | 20–98% RH (optional humidification system) |
| Compliance | GB/T 2423.1–2023, GB/T 2423.2–2023, GB/T 2424.1–2023, GB/T 5170.2–2017, IEC 60068-2-1, IEC 60068-2-2 |
| Brand | Suying |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Manufacturer |
| Model | SY-SSC Series |
| Temperature Range | 5–55 °C |
| Compliance Standards | GB/T 2423.17, GB/T 10587, GB/T 5170.8, ASTM B117, ISO 9227, JIS Z2247, CNS 1401 |
| Brand | Suying |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Models | SY/DW-100, SY/DW-250, SY/DW-500, SY/DW-800, SY/DW-1000 |
| Temperature Range Options | RT to –20 °C, –40 °C, –60 °C, or –70 °C |
| Internal Dimensions (W×D×H, mm) | 450×450×500 to 1000×1000×1000 |
| Temperature Uniformity | ±2 °C |
| Temperature Fluctuation | ±0.5 °C |
| Heating Rate | 1.0–3.0 °C/min |
| Cooling Rate | 0.7–1.0 °C/min |
| Control Resolution | ±0.1 °C |
| Power Supply | AC 380 V ±10%, 50 ±0.5 Hz, 3-phase 4-wire |
| Safety Protections | Over-temperature, over-current, compressor high-pressure, motor overload, leakage, and short-circuit protection |
| Brand | SuYing |
|---|---|
| Origin | Shanghai, China |
| Model | WDCJ-100 / WDCJ-250 / WDCJ-500 |
| Temperature Range (A/B/C) | -20/-40/-60 ℃ to 200 ℃ |
| Transfer Time (Hot ↔ Cold) | ≤15 s |
| Temperature Recovery Time | ≤5 min |
| Sample Zone Temp. Uniformity | ±0.5 ℃ (at steady state) |
| Sample Load Capacity | 20–50 kg |
| Compressor System | Dual-stage cascade refrigeration (R404A/R23) |
| Controller | OYO 9882 dual-loop touch-screen PID controller |
| Compliance | GB/T 2423.1–2, GB 10592–1989, GJB 150A–2009 |
| Power Consumption | 5.7–16 kW (model-dependent) |
| Brand | inTEST–Temptronic |
|---|---|
| Origin | USA |
| Model | Temptronic TP04300 |
| Temperature Range | −80 °C to +225 °C |
| Cooling Medium | Non-ozone-depleting refrigerant (no LN₂ or LCO₂ required) |
| Airflow Output | 4–18 SCFM (1.8–8.5 L/s) |
| Ramp Rate | <10 s from −55 °C to +125 °C and vice versa |
| Temperature Accuracy | ±1 °C (NIST-traceable calibration) |
| Temperature Resolution | 0.1 °C |
| Sensor Type | T-type or K-type thermocouple |
| Control Interfaces | IEEE-488, RS232, Ethernet |
| Display | Touchscreen Windows®-based HMI |
| Defrosting | Automatic hot-gas defrost |
| Electrostatic Protection | ESD-safe enclosure design |
| Compliance | Designed for GLP/GMP environments |
| Brand | inTEST–Temptronic |
|---|---|
| Origin | USA |
| Model | TP04310 |
| Temperature Range | −80 °C to +225 °C |
| Airflow Output | 4–18 scfm (1.8–8.5 L/s) |
| Transition Rate | <10 s from −55 °C to +125 °C and vice versa |
| Temperature Accuracy | ±1 °C (NIST-traceable calibration) |
| Temperature Resolution | 0.1 °C |
| Sensor Type | T-type or K-type thermocouple |
| Remote Interface | IEEE-488 (GPIB), RS-232 |
| Dimensions (W×D×H) | 61 × 72.4 × 108 cm |
| Weight | 236 kg |
| Operating Height Range | 69.1–130.3 cm (extendable to 81.3–188 cm) |
| Sound Pressure Level | <65 dBA |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | BENCHMASTER |
| Temperature Range | -68°C to +180°C (optional up to +200°C) |
| Temperature Uniformity | ±1.0°C |
| Temperature Stability | ±1.0°C |
| Temperature Deviation | ±1.0°C |
| Internal Dimensions (W×H×D) | 521 mm × 508 mm × 559 mm |
| Volume | 141 L (5.0 ft³) |
| Heating Rate | Ambient to 180°C in 32 min |
| Cooling Rate | 180°C to -65°C in 59 min |
| Humidity Range (Humidity Models) | 20–95% RH at +20°C to +85°C dry-bulb, dew point limited to 5°C |
| Humidity Control Accuracy | ±5% RH |
| Airflow | 115 CFM (3.2 m³/min) |
| Power Supply | 230 V, 1-Phase, 60 Hz, 40 A |
| Compressor Type | Cascade refrigeration system |
| Controller | Watlow F4T with INTUITION™ process control software |
| Compliance | ISO/IEC 17025 calibration available, NIST-traceable RTD sensors, GLP/GMP-ready data logging |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | C-EVO |
| Temperature Range | -70°C to 180°C |
| Humidity Range (RS/RC models) | 20–95% RH (at dry-bulb 20–85°C, dew point ≥5°C) |
| Temperature Uniformity | ±1.0°C |
| Temperature Stability | ±0.5°C |
| Temperature Deviation | ±1.0°C |
| Internal Dimensions (W×H×D) | 1016 mm × 2057 mm × 2007 mm to 1626 mm × 2616 mm × 2515 mm |
| Heating Rate (ambient to 180°C) | ≤35 min (typical, model-dependent) |
| Cooling Rate (-68°C to 180°C) | up to 134°C/min (model-dependent) |
| Control System | Smart 1.1™ 7-inch touchscreen PLC with Ethernet, USB, RS232/RS485 |
| Compliance | FM-certified safety architecture, NIST-traceable calibration support, ISO/IEC 17025-compliant calibration services available |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | CONDITIONED |
| Temperature Range | -68°C to +180°C |
| Temperature Uniformity | ±1.0°C |
| Temperature Fluctuation | ±1.0°C |
| Temperature Deviation | ±1.0°C |
| Ramp Time | Ambient to 180°C |
| Chamber Dimensions (W×H×D) | 521 mm × 508 mm × 559 mm |
| Application | Air Thermal Aging Test Chamber |
| Classification | Environmental Test Chamber / High-Temperature Aging Chamber |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | FCR Series |
| Temperature Range | -70°C to 180°C (Single-Stage), -68°C to 180°C (Cascade) |
| Temperature Uniformity | ±1.0°C |
| Temperature Fluctuation | ±0.5°C |
| Temperature Deviation | ±1.0°C |
| Ramp Rate (Cooling) | Up to 16.5°C/min (15 HP, Single-Stage, 180°C → −35°C) |
| Ramp Rate (Heating) | Up to 17.5°C/min (15 HP, Cascade, −68°C → 180°C) |
| Internal Dimensions (W×H×D) | 1016 mm × 2057 mm × 2007 mm to 1626 mm × 2616 mm × 2515 mm |
| Airflow | 750–1500 CFM |
| Controller | Synergy Quattro Touchscreen (320×240 color LCD, PID with auto-tuning, dual-channel adaptation) |
| Compliance | ISO/IEC 17025 calibration support available |
| Power Supply | 208–460 VAC, 3-phase, 60 Hz |
| Cooling System | Scroll compressor (6/10/15 HP options), air- or water-cooled |
| Heating System | Nickel-chrome wire heaters (6/12/18 kW) |
| Safety | FM-approved OTP, backup thermal fuse, main disconnect with lockout, chamber vent |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | LUNAIRE CEO |
| Type | High-Temperature Aging Test Chamber |
| Temperature Range | -70°C to +180°C |
| Uniformity | ±1.0°C |
| Stability | ±0.5°C |
| Deviation | ±1.0°C |
| Ramp Time | Ambient to 180°C |
| Interior Dimensions (W×H×D) | 1016 mm × 2057 mm × 2007 mm to 1626 mm × 2616 mm × 2515 mm |
| Working Volume Options | 8, 16, 32, and 58 ft³ |
| Humidity Range (optional) | 20–95% RH at +20°C to +85°C dry-bulb |
| Controller | Watlow F4T with INTUITION™ process control software |
| Compliance | Designed for ICH Q1–Q5, ASTM D3045, ISO 188, USP <1151>, and GLP/GMP-aligned validation protocols |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | LUNAIRE SS |
| Temperature Range | -70°C to 180°C |
| Temperature Uniformity | ±1.0°C |
| Temperature Stability | ±0.5°C |
| Temperature Deviation | ±1.0°C |
| Heating Rate | Ambient to 180°C |
| Internal Dimensions (W×H×D) | 1016 mm × 2057 mm × 2007 mm to 1626 mm × 2616 mm × 2515 mm |
| Application | High-Temperature Aging, ICH Q1A Stability Testing, Thermal Endurance Evaluation |
| Humidity Range (Optional) | 20–95% RH at +20°C to +85°C dry-bulb |
| Humidity Accuracy | ±2% RH |
| Controller | Watlow F4T with INTUITION™ Process Control Software |
| Compliance | Designed for GLP/GMP environments |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | SafeTest Battery Test |
| Temperature Range | -68°C to +180°C |
| Uniformity | ±1.0°C |
| Stability | ±1.0°C |
| Deviation | ±1.0°C |
| Max Operating Temperature | 200°C |
| Internal Dimensions (W×H×D) | 521 mm × 508 mm × 559 mm |
| Type | Forced-Air Thermal Aging Chamber for Battery Safety Testing |
| Compliance Support | EUCAR Hazard Level Assessment, ISO 12405, UL 1642, UN 38.3, IEC 62133, SAE J2464 |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | STRAT Altitude Simulation Test Chamber |
| Temperature Range | -68°C to +177°C |
| Altitude Simulation Range | Up to 200,000 ft (≈60,960 m) |
| Humidity Range (xxSTR models only) | 20–98% RH |
| Temperature Uniformity | ±0.3°C |
| Temperature Stability | ±0.3°C |
| Temperature Deviation | ±0.3°C |
| Ramp Time (to max temp) | ≤60 min |
| Internal Volume | 5–64 ft³ (0.14–1.81 m³) |
| Vacuum Control | Capacitive pressure sensor with automated vacuum/exhaust valves |
| Refrigeration System | Dual-stage cascade with two semi-hermetic compressors |
| Heating | Open-wire NiCr heating elements |
| Interior | Continuously welded stainless steel airtight liner |
| Controller | Synergy Quattro touchscreen (320×240 color LCD), Windows CE OS, PID with auto-tuning, dual-channel operation, USB/RS-232/Ethernet (10/100) connectivity, flash memory logging, alarm outputs, I/O expansion via OLYMPUS module |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | TC |
| Temperature Range | -70°C to +180°C |
| Temperature Uniformity | ±1.0°C |
| Temperature Stability | ±0.5°C |
| Temperature Deviation | ±1.0°C |
| Ramp Rate (Ambient to 180°C) | Standard |
| Internal Dimensions (W×H×D) | 1016 mm × 2057 mm × 2007 mm to 1626 mm × 2616 mm × 2515 mm |
| Chamber Type | Air Thermal Aging Test Chamber |
| Cooling System | Single-Stage or Cascade Refrigeration |
| Controller | Watlow F4T with INTUITION™ Process Control |
| Compliance | Designed for GLP/GMP environments |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | UTC |
| Temperature Range | -70°C to 180°C (optional up to 200°C) |
| Humidity Range | 20–95% RH (at dry-bulb 20°C–85°C, dew point ≥5°C) |
| Temperature Uniformity | ±1.0°C |
| Temperature Stability | ±0.5°C |
| Temperature Deviation | ±1.0°C |
| Internal Dimensions (W×H×D) | 1016 mm × 2057 mm × 2007 mm to 1626 mm × 2616 mm × 2515 mm |
| Refrigeration | 2.5 HP cascade system |
| Heating Capacity | 2 kW |
| Airflow | 115 CFM |
| Power Supply | 230 V, 1-phase, 60 Hz, 40 A |
| Noise Level | <58 dB(A) at 3 ft from chamber, 5 ft above floor |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | Walk-In Environmental Test Chamber |
| Temperature Range | Ambient to +200°C |
| Temperature Uniformity | ±1.0°C |
| Temperature Stability | ±0.5°C |
| Temperature Deviation | ±1.0°C |
| Ramp-Up Time | ≤100 min (to +200°C) |
| Interior Dimensions (W×H×D) | 1016 mm × 2057 mm × 2007 mm to 1626 mm × 2616 mm × 2515 mm |
| Construction | Stainless steel interior, galvanized exterior, 102 mm (4″) polyurethane insulated panels |
| Humidity Range | 20–95% RH (at 20–70°C, dew point ≥5°C) |
| Floor Load Capacity | 340 kg/m² (750 lb/ft², uniformly distributed) |
| Refrigeration | Single-stage (“S”) or cascade (“C”) systems available |
| Heating | Open-coil NiCr heating elements on ceramic insulators |
| Air Circulation | Dual centrifugal blowers, horizontal downward airflow |
| Controller | Synergy Quattro touchscreen PID controller with Ethernet (TCP/IP), RS-232, USB, and flash memory support |
| Brand | Tuofeng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | TF-310B |
| Spray Mode | Continuous Atomization |
| Fog Output | 1–2 mL per 80 cm² per 24 h |
| Nozzle Pressure | 0.5–2 kg/cm² |
| De-misting Method | Compressed-air-assisted雾 expulsion |
| Salt Fog Deposition Rate | 1–2 mL/h (per 80 cm²) |
| Temperature Range | 30–70 °C |
| Internal Chamber Dimensions (W×D×H) | 60 × 45 × 40 cm |
| External Dimensions (W×D×H) | 108 × 63 × 119 cm |
| Salt Solution Tank Capacity | 15 L |
| Rated Voltage | 220 V AC |
| Power Consumption | 2 kW |
| Compliance | GB/T 2423.17–1993, GB/T 2423.18–2000, GB/T 10125–1997, ASTM B117–97, JIS H8502, IEC 60068-2-11, IEC 60068-2-52, GB/T 10587–2006, GB/T 12967.3–1991 (CASS) |
| Brand | Tuofeng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM Manufacturer |
| Region of Origin | Domestic (China) |
| Model | TF-312C |
| Price Range | USD 7,000 – 14,000 |
| Internal Dimensions (W×D×H, mm) | 450×450×500 / 500×600×750 / 700×800×900 / 800×1000×1000 |
| External Dimensions (W×D×H, mm) | 1200×1000×1800 / 1300×1150×2050 / 1450×1400×2250 / 1520×1540×2300 |
| Power Consumption | 4.0 kW / 4.5 kW / 7.0 kW / 11.5 kW |
| Temperature Range | 0°C to 70°C |
| Humidity Range | 30–65% RH |
| Ozone Concentration Range | 50–500 pphm (parts per hundred million) |
| Temperature Uniformity | ±0.5°C |
| Sample Rack | 360° continuous rotation at 1 rpm (static mode optional) |
| Gas Flow Velocity | 12–16 mm/s |
| Temperature Controller | Imported LED digital P.I.D. + S.S.R. microcomputer-integrated controller |
| Timer | High-precision programmable timer (hour/minute/second) |
| Ozone Monitoring | Imported ozone concentration analyzer with 4–20 mA analog output and RS232 communication interface |
| Ozone Generator Type | Silent corona discharge tube or UV absorption type (optional) |
| Safety Protections | Leakage current protection, short-circuit protection, overtemperature cutoff, motor overheat protection, overcurrent protection |