Environmental Test Chamber
Filter
Showing 1771–1800 of 3663 results
| Brand | LabCompanion |
|---|---|
| Model | YWX-150 / YWX-250 / YWX-750 / YWX-010 / YWX-016 / YWX-020 |
| Temperature Range | R.T. +10 °C to 55 °C |
| Test Temperatures | 35 °C ±1 °C (NSS), 50 °C ±1 °C (CASS) |
| Temp. Uniformity | ±2 °C |
| Temp. Stability | ±0.5 °C |
| Fog Deposition Rate | 1–2 mL/80 cm²·h |
| Spray Modes | Continuous or Cyclic |
| Timer Range | 0–9999 h/min/sec |
| Chamber Material | PVC rigid board |
| Saturated Air Tank | SUS304 stainless steel |
| Heating System | Stainless steel tubular heaters |
| Control System | Microprocessor-based PID with SSR output |
| Safety Protections | Overcurrent breaker, chamber overtemperature protection, saturated tank overtemperature protection, low-water-level cutoff |
| Power Supply | 220 V/50 Hz or 380 V/50 Hz |
| Internal Volume | 100–1080 L |
| Compliant With | GB/T 10587–1989, GB/T 2423.17–2022, IEC 60068-2-11:2022 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | YWX-150 / YWX-250 / YWX-750 / YWX-010 / YWX-016 / YWX-020 |
| Temperature Range | R.T. +10°C to 55°C |
| Test Temperatures | 35°C ±1°C (NSS), 50°C ±1°C (CASS) |
| Temperature Uniformity | ±2°C |
| Temperature Fluctuation | ±0.5°C |
| Salt Spray Deposition Rate | 1–2 mL/80 cm²·h |
| Spray Mode | Continuous or Cyclic |
| Timer Range | 0–9999 h/min/sec |
| Chamber Material | Imported PVC rigid board |
| Saturated Air Tank Material | SUS304 stainless steel |
| Heating Method | Steam-direct electric heating |
| Control System | Microprocessor-based PID controller with SSR output |
| Safety Protections | Dual overtemperature protection, low-water-level cutoff, overcurrent breaker |
| Internal Volume | 100–1080 L |
| Power Supply | 220V/50Hz or 380V/50Hz |
| Compliance | GB/T 10587–1989, GB/T 2423.17–2022 (Test Ka), IEC 60068-2-11 (Test Ka) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZA-3 |
| Pricing | Available Upon Request |
| Construction | Interior & Exterior Chambers in SUS#304 Stainless Steel |
| Temperature Control | PID + PWM + SSR System with Dual Over-Temperature Protection |
| Temperature Resolution | 0.1 °C (T-type Thermocouple Sensor) |
| Chamber Dimensions (W×D×H) | 50 × 17 × 40 cm |
| External Dimensions (W×D×H) | 75 × 57 × 50 cm |
| Test Tray Configuration | Triple-Slot Design (Each Slot: 10 × 38 × 10 cm) |
| Safety Features | Low-Water Level Indicator, Steam Venting Port |
| Optional Accessories | Programmable Power-On Scheduler, RO-Purified Water Auto-Fill System |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZA-3 |
| Pricing | Available Upon Request |
| Construction | Interior & Exterior Chambers in SUS#304 Stainless Steel |
| Temperature Control System | PID + PWM + SSR with Dual Over-Temperature Protection |
| Temperature Sensor | T-type Thermocouple |
| Temperature Resolution | 0.1 °C |
| Display | LED Digital Interface |
| Chamber Internal Dimensions | 50 × 17 × 40 cm (W×D×H) |
| External Dimensions | 75 × 57 × 50 cm (W×D×H) |
| Test Tray Configuration | Triple-compartment, each 10 × 38 × 10 cm (W×D×H) |
| Safety Features | Low-Water Level Indicator, Steam Venting Port |
| Optional Accessories | Programmable Power-On Scheduler, RO-Purified Water Auto-Fill System |
| Brand | Labonce |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | Labonce-1000BC |
| Price | Upon Request |
| Temperature Range | 2–14°C |
| Internal Volume | 1000 L |
| Internal Dimensions (W×D×H) | 1400×510×1400 mm |
| External Dimensions (W×D×H) | 1620×930×1980 mm |
| Power Consumption | 1.5 kW |
| Standard Shelves | 4 adjustable stainless steel shelves |
| Temperature Uniformity | ≤2.0°C |
| Temperature Fluctuation | <±1.0°C |
| Temperature Deviation | <±2.0°C |
| Ambient Operating Temperature | +5 to +30°C |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Compliance | YY/T 0086–2020 Medical Refrigerated Cabinets |
| Control System | Programmable color touchscreen controller with triple-level user permissions and electronic data logging |
| Safety Features | Compressor overheat & high-pressure overload protection |
| Alarm System | Local audible alarm + remote SMS alert for temperature deviation and power failure |
| Insulation | High-density polyurethane foam (≥100 mm thickness) |
| Interior Material | Mirror-finish AISI 304 stainless steel |
| Exterior Material | Powder-coated cold-rolled steel |
| Additional Features | Test port with rubber plug, casters with brakes, door lock, optional thermal printer |
| Brand | Labonce |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | Labonce-1000CH-2T |
| Temperature Range | 15–60 °C |
| Humidity Range | 20–95 %RH |
| Internal Volume | 1000 L |
| Internal Dimensions (W×D×H) | 1400×510×1400 mm |
| External Dimensions (W×D×H) | 1615×925×1975 mm |
| Temperature Uniformity | ≤2.0 °C |
| Temperature Fluctuation | <±0.5 °C |
| Temperature Deviation | <±1.0 °C |
| Humidity Fluctuation | <±3 %RH |
| Humidity Deviation | <±3 %RH |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Rated Power | 3.0 kW |
| Standard Shelves | 4 pcs |
| Door Configuration | Dual-door |
| Insulation | High-density polyurethane foam |
| Interior Material | Mirror-finish 304 stainless steel |
| Exterior Material | Powder-coated steel |
| Refrigeration System | Imported hermetic compressor |
| Humidity Sensor | Capacitive humidity sensor (imported) |
| Controller | Programmable color touchscreen with data logging and USB export |
| Safety Features | Dry-run protection, independent overtemperature cutoff, audible alarm |
| Compliance | GB/T 10586–2006 |
| Brand | Labonce |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | Labonce-1000GDJ |
| Temperature Range | –60 °C to +150 °C (selectable) |
| Internal Volume | 1000 L |
| Interior Dimensions (W×D×H) | 1000 mm × 1000 mm × 1000 mm |
| Exterior Dimensions (W×D×H) | 1500 mm × 1500 mm × 2200 mm |
| Standard Shelves | 2 pcs |
| Temperature Uniformity | ±0.5 °C (fluctuation), ±2.0 °C (deviation) |
| Heating Rate | 1–3 °C/min |
| Cooling Rate | 0.7–1 °C/min |
| Control System | Programmable Color Touchscreen Controller with Multi-Stage & Constant-Value Modes |
| Data Logging | Internal Electronic Storage with USB Export Capability |
| Safety Protections | Compressor Overheat & High-Pressure Cut-off, Fan Overheat Protection, Upper/Lower Temperature Deviation Alarm, Independent Over-Temperature Cut-off |
| Construction | Exterior – Powder-Coated Steel |
| Air Circulation | Optimized Dual-Channel Airflow System per GB/T 10592–2008 |
| Compliance | Designed and verified per GB/T 10592–2008 “Technical Specifications for High-Low Temperature Test Chambers” |
| Brand | Labonce |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | Labonce-1000JS |
| Temperature Range | –60 °C to +150 °C (configurable) |
| Humidity Range | 20–98 %RH |
| Internal Volume | 1000 L |
| Internal Dimensions (W×D×H) | 1000×1000×1000 mm |
| External Dimensions (W×D×H) | 1500×1500×2200 mm |
| Temperature Uniformity | ±2.0 °C |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Accuracy | ±3 %RH (>75 %RH), ±5 %RH (≤75 %RH) |
| Heating Rate | 1–3 °C/min |
| Cooling Rate | 0.7–1 °C/min |
| Control System | Programmable Color Touchscreen Controller with Multi-Stage & Constant-Value Modes |
| Data Logging | Internal Electronic Storage with USB Export |
| Safety Protections | Compressor Overheat/Overpressure Protection, Fan Overheat Protection, Independent Overtemperature Cut-off, Upper/Lower Limit Deviation Alarms |
| Brand | Labonce |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | Labonce-1000TH-T |
| Temperature Range | 0–100 °C |
| Humidity Range | 20–95 %RH |
| Internal Volume | 1000 L |
| Internal Dimensions (W×D×H) | 1400×510×1400 mm |
| External Dimensions (W×D×H) | 1615×925×1975 mm |
| Power Consumption | 3.0 kW |
| Temperature Uniformity | ≤2.0 °C |
| Temperature Fluctuation | <±0.5 °C |
| Temperature Deviation | <±2.0 °C |
| Humidity Fluctuation | <±3 %RH |
| Humidity Deviation | <±3 %RH (>75 %RH), <±5 %RH (≤75 %RH) |
| Ambient Operating Temperature | +5 to +35 °C |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Control System | Programmable Color Touchscreen Controller with Multi-Step & Constant-Value Modes |
| Humidity Sensor | Imported High-Temperature Capacitive RH Sensor |
| Refrigeration | Imported Hermetic Compressor |
| Insulation | High-Density Polyurethane Foam |
| Interior Material | Mirror-Finish 304 Stainless Steel |
| Exterior Material | Powder-Coated Steel |
| Safety Features | Dry-Burn Protection, Independent Over-Temperature Cut-Off, Audible Alarm |
| Data Logging | Onboard Electronic Storage with USB Export Capability |
| Standard Accessories | Test Port with Rubber Plug, Casters, Door Lock, 4 Adjustable Shelves |
| Optional Accessories | Printer, Interior LED Lighting |
| Compliance | GB/T 10586–2006 Technical Requirements for Damp Heat Test Chambers |
| Brand | Labonce |
|---|---|
| Model | Labonce-100GDJ |
| Temperature Range | -20 °C to 150 °C (Option A) / -40 °C to 150 °C (Option B) / -60 °C to 150 °C (Option C) |
| Internal Volume | 100 L |
| Interior Dimensions (W×D×H) | 450 mm × 450 mm × 500 mm |
| Exterior Dimensions (W×D×H) | 730 mm × 1040 mm × 1570 mm |
| Temperature Uniformity | ±2.0 °C |
| Temperature Fluctuation | ±0.5 °C |
| Heating Rate | 1–3 °C/min |
| Cooling Rate | 0.7–1 °C/min |
| Construction | Exterior – Powder-coated steel |
| Control System | Programmable color touchscreen controller with multi-segment and constant-value programming |
| Data Logging | Built-in electronic data storage with USB export capability |
| Safety Protections | Compressor overheat & high-pressure overload protection |
| Compliance | GB/T 10592–2008 |
| Brand | Labonce |
|---|---|
| Model | Labonce-100GW |
| Temperature Range | RT+15 °C to 200 °C |
| Internal Volume | 100 L |
| Internal Dimensions (W×D×H) | 450×450×450 mm |
| External Dimensions (W×D×H) | 1100×700×800 mm |
| Power Consumption | 2.0 kW |
| Standard Shelving | 2 adjustable stainless steel shelves |
| Temperature Uniformity | ≤ ±2.0 °C (at ≤200 °C) |
| Temperature Fluctuation | ≤ ±0.5 °C (at ≤200 °C) |
| Compliance | GB/T 11158–2008 |
| Controller Type | Imported digital display controller (GW series) |
| Construction | Exterior – powder-coated steel |
| Safety | Independent over-temperature protection circuit |
| Brand | Labonce |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | Labonce-100GW-T |
| Temperature Range | RT+15 °C to 200 °C |
| Internal Volume | 100 L |
| Internal Dimensions (W×D×H) | 450×450×450 mm |
| External Dimensions (W×D×H) | 1100×700×800 mm |
| Power Rating | 2.0 kW |
| Standard Shelving | 2 adjustable stainless steel shelves |
| Temperature Uniformity | ≤ ±2.0 °C (at ≤200 °C) |
| Temperature Stability | ≤ ±0.5 °C (at ≤200 °C) |
| Controller Type | Programmable color touchscreen controller with three-tier user permissions and audit trail capability |
| Compliance | GB/T 11158–2008 |
| Brand | Labonce |
|---|---|
| Model | Labonce-100GWH |
| Temperature Range | RT+20 °C to 300 °C |
| Internal Volume | 100 L |
| Internal Dimensions (W×D×H) | 450×450×450 mm |
| External Dimensions (W×D×H) | 1100×700×800 mm |
| Power Consumption | 2.5 kW |
| Standard Shelving | 2 adjustable stainless steel shelves |
| Temperature Uniformity | ≤ ±2.0 °C (≤200 °C), ≤ ±3.0 °C (200–300 °C) |
| Temperature Fluctuation | ≤ ±0.5 °C (≤200 °C), ≤ ±1.0 °C (200–300 °C) |
| Compliance | GB/T 11158–2008 |
| Controller Options | Digital display controller (GW) or programmable color touchscreen controller with 3-tier user permissions and audit trail (GW-T) |
| Brand | Labonce |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | Labonce-100GWH-T |
| Temperature Range | +20 °C to 300 °C |
| Internal Volume | 100 L |
| Internal Dimensions (W×D×H) | 450×450×450 mm |
| External Dimensions (W×D×H) | 1100×700×800 mm |
| Power Consumption | 2.0 kW |
| Standard Shelving | 2 adjustable stainless steel shelves |
| Temperature Uniformity | ≤ ±2.0 °C (≤200 °C), ≤ ±3.0 °C (200–300 °C) |
| Temperature Stability | ≤ ±0.5 °C (≤200 °C), ≤ ±1.0 °C (200–300 °C) |
| Control System | Programmable color touchscreen controller with three-level user access and audit trail capability |
| Compliance | GB/T 11158–2008 |
| Brand | Labonce |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | labonce-100JS |
| Temperature Range | -20°C to 150°C (Configurable Options: -40°C or -60°C to 150°C) |
| Humidity Range | 20–98% RH |
| Internal Volume | 100 L |
| Internal Dimensions (W×D×H) | 450×450×500 mm |
| External Dimensions (W×D×H) | 730×1040×1570 mm |
| Standard Shelves | 2 pcs |
| Temperature Uniformity | ±2.0°C |
| Temperature Fluctuation | ±0.5°C |
| Humidity Accuracy | ±3% RH (>75% RH), ±5% RH (≤75% RH) |
| Heating Rate | 1–3°C/min |
| Cooling Rate | 0.7–1°C/min |
| Control System | Programmable Color Touchscreen Controller with Multi-Stage & Constant-Value Modes |
| Data Logging | Internal Electronic Storage with USB Export Capability |
| Safety Protections | Compressor Overheat & High-Pressure Protection, Fan Overheat Protection, Independent Over-Temperature Cut-off, Upper/Lower Limit Deviation Alarms |
| Brand | Labonce |
|---|---|
| Model | Labonce-15000GS |
| Temperature Range | 20–45°C (±0.5°C uniformity, ±1.0°C deviation) |
| Humidity Range | 20–80% RH (±3.0% RH deviation) |
| Internal Volume | 15,000 L |
| Internal Dimensions (W×D×H) | 1900×4000×2000 mm |
| External Dimensions (W×D×H) | 2050×4950×2250 mm |
| Power Requirement | 5.5 kW |
| Compliance | GB/T 10586-2006, JJF 1101-2019, ICH Q1–Q5, ChP 2020 |
| Control System | 7-inch color programmable touchscreen with triple-level user authentication and audit trail |
| Humidity Sensor | Imported capacitive type, maintenance-free |
| Data Management | Embedded electronic storage + thermal printer + USB export (immutable format) |
| Safety | Keyed door lock with anti-jamming mechanism, internal emergency stop, multi-layer fault protection |
| Optional | Network server integration compliant with FDA 21 CFR Part 11 |
| Brand | Labonce |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | Labonce-1500GS-FC |
| Temperature Range | 10–65 °C |
| Humidity Range | 15–95 %RH |
| Internal Volume | 1500 L |
| Internal Dimensions (W×D×H) | 1500×710×1400 mm |
| External Dimensions (W×D×H) | 1710×1180×1990 mm |
| Power Consumption | 3.2 kW |
| Temperature Uniformity | ±1.0 °C |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Uniformity | ±3 %RH |
| Humidity Fluctuation | ±2 %RH |
| Ambient Operating Temperature | +5 to +35 °C |
| Power Supply | 220 V, 50/60 Hz |
| Door Configuration | Dual-door (outer solid door + inner tempered glass door) |
| Insulation | High-density polyurethane foam |
| Interior Material | Mirror-finish AISI 304 stainless steel |
| Exterior Finish | Powder-coated steel |
| Compressor | Imported hermetic inverter compressor |
| Humidity Sensor | Imported capacitive RH sensor |
| Controller | 7-inch color programmable touchscreen with real-time inverter output display |
| User Access Control | Three-tier role-based authentication (admin/operator/user) |
| Audit Trail | Time-stamped, tamper-resistant operation and alarm logs exportable via USB in read-only format |
| Data Output | Built-in thermal line printer + internal electronic data storage |
| Safety Protections | Independent overtemperature cutoff, compressor overheat/overpressure protection, low-water and dry-burn prevention |
| Alarm System | Local audible alarm + remote SMS alerts for temperature/humidity deviation and power failure |
| Brand | Labonce |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | Labonce-150CH-T |
| Temperature Range | 15–60 °C |
| Humidity Range | 20–95 %RH |
| Internal Volume | 150 L |
| Internal Dimensions (W×D×H) | 600×405×620 mm |
| External Dimensions (W×D×H) | 780×830×1480 mm |
| Power Consumption | 1.5 kW |
| Temperature Uniformity | ≤2.0 °C |
| Temperature Fluctuation | <±0.5 °C |
| Temperature Deviation | <±1.0 °C |
| Humidity Fluctuation | <±3 %RH |
| Humidity Deviation | <±3 %RH |
| Ambient Operating Temperature | +5 to +35 °C |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Standard Shelves | 3 pcs (adjustable) |
| Door Configuration | Single door |
| Compliance | GB/T 10586–2006 |
| Brand | Labonce |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | Labonce-150TH-T |
| Temperature Range | 0–100 °C |
| Humidity Range | 20–95 %RH |
| Internal Volume | 150 L |
| Internal Dimensions (W×D×H) | 600×405×620 mm |
| External Dimensions (W×D×H) | 780×830×1480 mm |
| Power Consumption | 1.5 kW |
| Temperature Uniformity | ≤2.0 °C |
| Temperature Fluctuation | <±0.5 °C |
| Temperature Deviation | <±2.0 °C |
| Humidity Fluctuation | <±3 %RH |
| Humidity Deviation | <±3 %RH (>75 %RH), <±5 %RH (≤75 %RH) |
| Control System | Programmable Color Touchscreen Controller with Multi-Step & Constant-Value Modes |
| Humidity Sensor | Imported High-Temperature Capacitive RH Sensor |
| Insulation | High-Density Polyurethane Foam |
| Inner Chamber Material | Mirror-Finish AISI 304 Stainless Steel |
| Outer Casing | Powder-Coated Steel |
| Refrigeration System | Imported Hermetic Compressor |
| Safety Features | Dry-Burn Protection, Independent Over-Temperature Cut-Off, Audible Alarm |
| Data Logging | Internal Electronic Storage with USB Export Capability |
| Standard Accessories | Test Port with Rubber Plug, Casters, Door Lock, 3 Adjustable Shelves |
| Compliance | GB/T 10586–2006 Technical Specifications for Damp Heat Test Chambers |
| Brand | Labonce |
|---|---|
| Model | Labonce-20000GS |
| Temperature Range | 20–45°C (±0.5°C uniformity, ±1.0°C deviation) |
| Humidity Range | 20–80% RH (±3.0% RH deviation) |
| Internal Volume | 20,000 L |
| Internal Dimensions (W×D×H) | 2200 × 4100 × 2200 mm |
| External Dimensions (W×D×H) | 2400 × 4300 × 2400 mm |
| Power Requirement | 6.0 kW |
| Compliance | GB/T 10586-2006, JJF 1101-2019, ICH Q1–Q5, Chinese Pharmacopoeia 2020 Edition |
| Control System | 7-inch color programmable touchscreen with audit trail, triple-level user access, and FDA 21 CFR Part 11–compliant data management options |
| Brand | Labonce |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | Labonce-250CH-T |
| Temperature Range | 15–60 °C |
| Humidity Range | 20–95 %RH |
| Internal Volume | 250 L |
| Internal Dimensions (W×D×H) | 600×500×830 mm |
| External Dimensions (W×D×H) | 780×880×1650 mm |
| Power Consumption | 1.8 kW |
| Temperature Uniformity | ≤2.0 °C |
| Temperature Fluctuation | <±0.5 °C |
| Temperature Deviation | <±1.0 °C |
| Humidity Fluctuation | <±3 %RH |
| Humidity Deviation | <±3 %RH |
| Ambient Operating Temperature | +5 to +35 °C |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Standard Shelves | 3 (adjustable), up to 7 total |
| Compliance | GB/T 10586–2006 |
| Brand | Labonce |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | Labonce-250FT |
| Pricing | Upon Request |
| Temperature Range | 0–70 °C |
| Humidity Range | 10–80 %RH |
| Chamber Volume | 250 L |
| Internal Dimensions (W×D×H) | 600×500×830 mm |
| External Dimensions (W×D×H) | 780×880×1650 mm |
| Power Consumption | 1.8 kW |
| Standard Shelves | 3 (adjustable) |
| Temperature Uniformity | ±0.5 °C |
| Temperature Fluctuation | ±0.2 °C |
| Temperature Deviation | ±0.5 °C |
| Humidity Uniformity | ±2.0 %RH |
| Humidity Fluctuation | ±1.5 %RH |
| Humidity Deviation | <±2.0 %RH |
| Ambient Operating Temperature | +5 to +35 °C |
| Power Supply | 220 V, 50/60 Hz |
| Compliance Standards | ICH Q1A–Q1E (2003), Chinese Pharmacopoeia 2020 Edition |
| Brand | Labonce |
|---|---|
| Model | Labonce-250GDJ |
| Temperature Range | -20 °C to 150 °C (Configurable Options: -40 °C / -60 °C to 150 °C) |
| Internal Volume | 250 L |
| Internal Dimensions (W×D×H) | 650 mm × 550 mm × 700 mm |
| External Dimensions (W×D×H) | 930 mm × 1180 mm × 1850 mm |
| Temperature Uniformity | ±2.0 °C |
| Temperature Fluctuation | ±0.5 °C |
| Heating Rate | 1–3 °C/min |
| Cooling Rate | 0.7–1 °C/min |
| Construction | Exterior – Powder-coated steel |
| Control System | Programmable color touchscreen controller with multi-segment ramp-soak profiles and constant-value operation |
| Data Logging | Internal electronic storage with USB export capability |
| Safety Protections | Compressor overheat & high-pressure cut-off, fan overheat protection, independent over-temperature safety cutoff, upper/lower temperature deviation alarm |
| Compliance | GB/T 10592–2008 |
| Brand | Labonce |
|---|---|
| Model | Labonce-250GW |
| Temperature Range | RT+15 °C to 200 °C |
| Internal Volume | 250 L |
| Internal Dimensions (W×D×H) | 600×600×700 mm |
| External Dimensions (W×D×H) | 1250×850×1000 mm |
| Power Consumption | 2.5 kW |
| Standard Shelving | 2 adjustable stainless steel shelves |
| Temperature Uniformity | ≤ ±2.0 °C (at ≤200 °C) |
| Temperature Stability | ≤ ±0.5 °C (at ≤200 °C) |
| Compliance | GB/T 11158–2008 |
| Control System | Imported digital display controller (GW) or programmable color touchscreen controller with audit trail & three-tier user permissions (GW-T) |
| Construction | Exterior – powder-coated steel |
| Safety | Independent over-temperature protection circuit |
| Brand | Labonce |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | Labonce-250GW-T |
| Temperature Range | RT+15 °C to 200 °C |
| Internal Volume | 250 L |
| Internal Dimensions (W×D×H) | 600×600×700 mm |
| External Dimensions (W×D×H) | 1250×850×1000 mm |
| Power Consumption | 2.5 kW |
| Standard Shelving | 2 adjustable stainless steel shelves |
| Temperature Uniformity | ≤ ±2.0 °C (≤200 °C) |
| Temperature Fluctuation | ≤ ±0.5 °C (≤200 °C) |
| Controller | Programmable color touchscreen controller with three-tier user permission management and audit trail capability |
| Compliance | GB/T 11158–2008 |
| Brand | Labonce |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | Labonce-250GWH |
| Temperature Range | RT+20 °C to 300 °C |
| Internal Volume | 250 L |
| Internal Dimensions (W×D×H) | 600×600×700 mm |
| External Dimensions (W×D×H) | 1250×850×1000 mm |
| Power Rating | 3.0 kW |
| Standard Shelving | 2 adjustable stainless steel shelves |
| Temperature Uniformity | ≤ ±2.0 °C (≤200 °C) |
| Temperature Fluctuation | ≤ ±0.5 °C (≤200 °C) |
| Compliance | GB/T 11158–2008 |
| Controller Options | Digital display controller (GW) or programmable color touchscreen controller with 3-level user permissions and audit trail (GW-T) |
| Brand | Labonce |
|---|---|
| Model | Labonce-250GWH-T |
| Temperature Range | +20 to 300 °C |
| Internal Volume | 250 L |
| Internal Dimensions (W×D×H) | 600 × 600 × 700 mm |
| External Dimensions (W×D×H) | 1250 × 850 × 1000 mm |
| Power Consumption | 2.5 kW |
| Standard Shelving | 2 adjustable stainless steel shelves |
| Controller Type | Programmable color touchscreen with 3-tier user permissions and audit trail |
| Temperature Uniformity | ≤ ±2.0 °C (≤200 °C) |
| Temperature Fluctuation | ≤ ±0.5 °C (≤200 °C) |
| Compliance | GB/T 11158–2008 |
| Construction | Exterior – powder-coated steel |
| Safety | Independent overtemperature protection circuit |
| Brand | Labonce |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | labonce-250JS |
| Temperature Range | –40 °C to +150 °C (configurable) |
| Humidity Range | 20–98 %RH |
| Internal Volume | 250 L |
| Internal Dimensions (W×D×H) | 650×550×700 mm |
| External Dimensions (W×D×H) | 930×1180×1850 mm |
| Temperature Uniformity | ±2.0 °C |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Accuracy | ±3 %RH (>75 %RH), ±5 %RH (≤75 %RH) |
| Heating Rate | 1–3 °C/min |
| Cooling Rate | 0.7–1 °C/min |
| Control System | Programmable Color Touchscreen Controller with Multi-Step & Constant-Value Modes |
| Data Logging | Internal Electronic Storage with USB Export |
| Safety Protections | Compressor Overheat & High-Pressure Cut-off, Fan Overheat Protection, Independent Over-Temperature Cut-out, Upper/Lower Limit Deviation Alarm |
| Construction | Exterior – Powder-Coated Steel |
| Air Circulation | Optimized Dual-Channel Airflow System |
| Refrigeration | Imported Hermetic Industrial Compressor |
| Optional Accessory | Pin-Type Micro Printer |
| Compliance | GB/T 10592–2008 |
| Brand | Labonce |
|---|---|
| Model | Labonce-33000GS |
| Temperature Range | 20–45°C (±0.5°C uniformity, ±1.0°C deviation) |
| Humidity Range | 20–80% RH (±3.0% RH deviation) |
| Internal Volume | 33,000 L |
| Internal Dimensions (W×D×H) | 2950×5200×2200 mm |
| External Dimensions (W×D×H) | 3150×5400×2400 mm |
| Power Requirement | 6.5 kW |
| Compliance | GB/T 10586-2006, JJF 1101-2019, ICH Q1–Q5, ChP 2020, FDA 21 CFR Part 11 (with optional network server) |
| Brand | Labonce |
|---|---|
| Model | Labonce-40000GS |
| Temperature Range | 20–45°C (±0.5°C uniformity, ±1.0°C deviation) |
| Humidity Range | 20–80% RH (±3.0% RH deviation) |
| Internal Volume | 40,000 L |
| Internal Dimensions (W×D×H) | 3600 × 5200 × 2200 mm |
| External Dimensions (W×D×H) | 3800 × 5400 × 2400 mm |
| Power Requirement | 7.5 kW |
| Compliance | GB/T 10586-2006, JJF 1101-2019, ICH Q1–Q5, Chinese Pharmacopoeia 2020 Edition |
| Control System | 7-inch color programmable touchscreen with 3-tier user authentication and audit trail |
| Humidity Sensor | Imported capacitive type, maintenance-free |
| Data Management | Embedded electronic storage + thermal printer + USB export (immutable format) |
| Alarm System | Local audible alarm + remote SMS alerts for deviation, low water, power failure |
| Safety | Keyed door lock with anti-jamming mechanism, internal emergency stop button, multi-layer hardware interlocks |
| Optional | Network server integration compliant with FDA 21 CFR Part 11 |