Environmental Test Chamber
Filter
Showing 1741–1770 of 3663 results
| Brand | LabCompanion |
|---|---|
| Model | UC-80S |
| Temperature Range (Standard Configuration) | -40 °C to +150 °C |
| Temperature Uniformity | ±0.5 °C |
| Temperature Accuracy | ±0.3 °C |
| Internal Dimensions (W×D×H) | 400 mm × 500 mm × 400 mm |
| External Dimensions (W×D×H) | 880 mm × 1650 mm × 920 mm |
| Construction | Interior – SUS304 stainless steel mirror finish |
| Insulation | Rigid polyurethane foam (glass wool used for high-temp operation up to 150 °C) |
| Refrigeration System | Hermetic compressor-based dual-stage cascade system (for -40 °C capability) |
| Control System | Korean-made PID controller with LCD interface, English-language firmware, LAN port optional |
| Compliance | GB/T 10589–2008, GB/T 2423.22–2012, IEC 60068-2-14 |
| Brand | LabCompanion |
|---|---|
| Model | UC-Series |
| Origin | Guangdong, China |
| Manufacturer Type | OEM Manufacturer |
| Temperature Range | –70 °C to +150 °C |
| Temperature Uniformity | ≤2 °C |
| Temperature Stability | ±0.5 °C |
| Heating/Cooling Rate | 0.7–10 °C/min (configurable) |
| Internal Dimensions (W×H×D mm) | 400×500×400 to 1000×1000×1000 |
| Power Supply | 220 V/380 V, 50 Hz |
| Refrigeration System | Single-stage or cascade (dual-stage) refrigeration with imported hermetic compressors (e.g., Tecumseh/Tecumseh-derived units) |
| Insulation | Polyurethane rigid foam + rock wool |
| Air Circulation | Stainless steel centrifugal blower with extended shaft |
| Controller | Microprocessor-based touch-panel PID controller with Pt100 platinum RTD sensor |
| Safety Protections | Over-temperature cutoff, compressor high-pressure protection, fuse, leakage current protection |
| Standard Accessories | Two adjustable stainless steel shelves, vacuum-sealed double-glazed observation window, test port (Φ50 mm), interior LED lighting, casters, status indicator lamps |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | UK-80 to UK-800 / SK-80 to SK-800 |
| Price | Upon Request |
| Temperature Range | –70 °C to +150 °C |
| Rapid Transition Range | –55 °C to +90 °C |
| Max Ramp Rate | 15 °C/min (linear) / 20 °C/min (non-linear) |
| Humidity Range | 20–98% RH (optional down to 5% RH with dehumidification module) |
| Temp Uniformity | ±0.5 °C |
| Temp Deviation | ≤ ±1.0 °C (≤100 °C), ≤ ±1.5 °C (>100 °C) |
| Humidity Uniformity | ±3.0% RH (>75% RH), ±5.0% RH (≤75% RH) |
| Humidity Stability | ±2.5% RH |
| Internal Volume | 80–800 L |
| Control System | TFT Color Touchscreen UMC1200 Controller (LabCompanion Custom Firmware) |
| Compliance | GB/T 10586, GB/T 10589, GB/T 10592, GB/T 2423.1, GB/T 2423.3, GB/T 2423.4, GB/T 2423.34, IEC 60068-2-1 (Test A), IEC 60068-2-2 (Test B), IEC 60068-2-14 (Test N), MIL-STD-810D Method 502.2 & 507.2, GJB 150.9 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | UP-150 |
| Pricing | Available Upon Request |
| Temperature Range (Standard Config) | –40°C to +100°C (Optional: –70°C to +150°C) |
| Humidity Range | 30–98% RH |
| Temperature Uniformity | ≤2°C |
| Temperature Fluctuation | ±0.5°C |
| Humidity Fluctuation | ±2–3% RH |
| Heating/Cooling Rate | 0.7–1°C/min (Optional: 3/5/10°C/min) |
| Internal Chamber Dimensions (W×D×H) | 500×600×500 mm |
| External Dimensions (Approx. W×D×H) | 960×1610×980 mm |
| Refrigeration System | Dual-stage cascade refrigeration |
| Compressor | HERMETIC TECUMSEH (France) |
| Humidification Method | Electric steam generator + saturated chamber humidification |
| Control System | TEMI 990 programmable controller (Korean) / SHIMADEN (Japan) / Honeywell (USA) optional |
| Sensor | PT100 platinum resistance thermometer |
| Safety Protections | Over-temperature cut-off, leakage current protection, high-pressure compressor shutdown, fast-acting fuse |
| Standard Accessories | Double-layer tempered glass observation window (220×180 mm), Ø50 mm test port, two stainless steel sample shelves, LED interior lighting |
| Power Supply | 220 V AC / 380 V AC, 50 Hz |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | UP-225U |
| Temperature Range | −60 °C to +150 °C |
| Humidity Range | 20–98% RH (optional dehumidification to ≤5% RH) |
| Temperature Uniformity | ±0.5 °C |
| Temperature Accuracy | ±0.3 °C |
| Humidity Accuracy | ±2.5% RH |
| Internal Dimensions (W×D×H) | 500 × 750 × 600 mm |
| Controller | Japanese ETAC820 Touchscreen Programmable Controller (1000 programmable steps, multi-pattern sequencing, auto-recovery after power interruption) |
| Cooling System | Hermetically sealed compressor with eco-friendly refrigerant |
| Air Circulation | Optimized horizontal forced-air system with adjustable baffles for uniform thermal/hygrometric distribution |
| Compliance | GB/T 10586, GB/T 10592, GB/T 2423.1/3/4/34, IEC 60068-2-1/-2/-14, MIL-STD-810D, GJB 150.9 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer | LabCompanion (Guangdong) Co., Ltd. |
| Model | UP-80A |
| Temperature Range | -60°C to +150°C |
| Humidity Range | 20–98% RH |
| Temperature Accuracy | ±0.3°C |
| Humidity Accuracy | ±2.5% RH |
| Temperature Uniformity | ±0.5°C |
| Internal Dimensions (W×D×H) | 400×500×400 mm |
| Construction | SUS304 Stainless Steel Interior |
| Control System | Korean-made PID-based LCD Controller with LAN Interface Option |
| Compliance | GB/T 10586–2014, GB/T 2423.3–2016 (IEC 60068-2-78), GB/T 2423.4–2016 (IEC 60068-2-30) |
| Brand | LabCompanion |
|---|---|
| Model | UP-80U |
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Compliance | GB/T 10589, GB/T 10586, GB/T 10592, GB/T 2423.1, GB/T 2423.3, GB/T 2423.4, GB/T 2423.34, IEC 68-2-1 (Test A), IEC 68-2-2 (Test B), IEC 68-2-14 (Test N), MIL-STD-810D Method 502.2, MIL-STD-810G Method 507.2, GJB 150.9 |
| Temperature Range | -70°C to +150°C |
| Humidity Range | 20–98% RH (optional dehumidification to ≤5% RH) |
| Control System | ETAC820 Programmable Touchscreen Controller (Japanese-made) |
| Data Interface | USB storage, RS-232/485, Ethernet, printer port, remote monitoring via TCP/IP |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | UV1/UV2/UV3 |
| Temperature Range | RT+10–70 °C |
| Humidity Range | ≥90% RH |
| Sample-to-Lamp Distance | 50 ± 2 mm |
| Lamp Center-to-Center Spacing | 70 mm |
| Irradiance | UVA-340 @ 0.68 W/m² (295–360 nm), UVB-313 @ 0.60 W/m² (280–315 nm) |
| Interior Dimensions | 1170 × 450 × 500 mm (W×D×H) |
| Exterior Dimensions | 1300 × 550 × 1380 mm (W×D×H) |
| Construction | Stainless Steel Interior & Exterior |
| Control System | Intelligent Digital Controller with AI-PID Regulation |
| Condensation Mechanism | Steam-Based Cold-Condensation Cycle |
| Compliance Standards | GB/T 16422.3–1997, ASTM G53–88, GB/T 14522–93 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM Manufacturer |
| Product Line | UV Series |
| Price | Upon Request |
| Temperature Range | RT+10 to 70 °C |
| Humidity Range | >90% RH |
| Sample-to-Lamp Distance | 50 ± 2 mm |
| Lamp Center-to-Center Spacing | 70 mm |
| Irradiance | UVA-340 @ 0.68 W/m² (295–360 nm), UVB-313 @ 0.60 W/m² (280–315 nm) |
| Interior Dimensions | 1170 × 450 × 500 mm (W×D×H) |
| Exterior Dimensions | 1300 × 550 × 1380 mm (W×D×H) |
| Construction | Stainless Steel Interior & Exterior |
| Control System | Intelligent Digital PID Controller with AI Algorithm |
| Condensation Mechanism | Steam-Based Cold-Condensation Cycle |
| Compliance Standards | GB/T 16422.3–1997, ASTM G53–88, GB/T 14522–93 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | UV-B |
| Humidity Range | ≥95% R.H. |
| Lamp Power | 40 W per tube |
| Irradiance Range | <50 W/m² |
| Exposure Time Setting | 1–9999 s / min / h (adjustable) |
| Black Panel Temperature Range | 40–65 °C |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | UV1 |
| Pricing | Upon Request |
| Temperature Range | RT+10°C to 70°C |
| Humidity Range | ≥90% RH |
| Sample-to-Lamp Distance | 50 ± 2 mm |
| Lamp Center-to-Center Spacing | 70 mm |
| Irradiance | UVA-340 @ 0.68 W/m² (295–360 nm), UVB-313 @ 0.60 W/m² (280–315 nm) |
| Internal Chamber Dimensions | 1170 × 450 × 500 mm (W×D×H) |
| External Dimensions | 1300 × 550 × 1380 mm (W×D×H) |
| Light Source | Fluorescent UV Lamps (UVA-340 or UVB-313 selectable) |
| Exposure Mechanism | Condensation Cycle (Humid Hot Air + Backside Cooling) |
| Compliance Standards | GB/T 16422.3–1997, ASTM G53–88, GB/T 14522–93 |
| Safety Protections | Overcurrent, Ground Fault, Overtemperature, Low-Water, Compressor Overpressure, Auto Power Cut-off with Audible Alert |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | UV1 |
| Pricing | Upon Request |
| Temperature Range | RT+10 to 70 °C |
| Humidity Range | ≥90% RH |
| Sample-to-Lamp Distance | 50 ± 2 mm |
| Lamp Center-to-Center Spacing | 70 mm |
| Irradiance | UVA-340 @ 0.68 W/m², UVB-313 @ 0.60 W/m² |
| Interior Dimensions | 1170 × 450 × 500 mm (W×D×H) |
| Exterior Dimensions | 1300 × 550 × 1380 mm (W×D×H) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | UV3 |
| Pricing | Upon Request |
| Temperature Range | RT+10°C to 70°C |
| Humidity Range | ≥90% RH |
| Sample-to-Lamp Distance | 50 ± 2 mm |
| Lamp Center-to-Center Spacing | 70 mm |
| Irradiance | UVA-340 @ 0.68 W/m² (295–360 nm), UVB-313 @ 0.60 W/m² (280–315 nm) |
| Internal Chamber Dimensions | 1170 × 450 × 500 mm (W×D×H) |
| External Dimensions | 1300 × 550 × 1380 mm (W×D×H) |
| Control System | Intelligent Digital PID Controller with AI Algorithm |
| Condensation Mechanism | Steam-based Surface Condensation Cycle |
| Compliance Standards | GB/T 16422.3–1997, ASTM G53–88, GB/T 14522–93 |
| Safety Protections | Overcurrent, Ground Fault, Overtemperature, Low-Water, Compressor Overpressure, and Auto-Power-Cut Interlocks |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Producer |
| Country of Origin | China |
| Model | UV3 |
| Pricing | Available Upon Request |
| Temperature Range | RT+10°C to 70°C |
| Humidity Range | ≥90% RH |
| Sample-to-Lamp Distance | 50 ± 2 mm |
| Lamp Center-to-Center Spacing | 70 mm |
| Irradiance | UVA-340 @ 0.68 W/m² (295–360 nm), UVB-313 @ 0.60 W/m² (280–315 nm) |
| Interior Dimensions | 1170 × 450 × 500 mm (W×D×H) |
| Exterior Dimensions | 1300 × 550 × 1380 mm (W×D×H) |
| Construction | Stainless Steel Interior & Exterior |
| Control System | Intelligent Digital PID Controller with AI Algorithm |
| Condensation Mechanism | Steam-Based Cold-Condensation Cycle |
| Compliance Standards | GB/T 16422.3–1997, ASTM G53–88, GB/T 14522–93 |
| Optional | UV Irradiance Sensor with Real-Time Feedback and Automatic Lamp Power Compensation |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Producer |
| Origin Category | Domestic (China) |
| Model | UV3 |
| Pricing | Upon Request |
| Temperature Range | RT+10°C to 70°C |
| Humidity Range | ≥90% RH |
| Sample-to-Lamp Distance | 50 ± 2 mm |
| Lamp Center-to-Center Spacing | 70 mm |
| Irradiance | UVA-340 @ 0.68 W/m² (295–360 nm), UVB-313 @ 0.60 W/m² (280–315 nm) |
| Interior Dimensions | 1170 × 450 × 500 mm (W×D×H) |
| Exterior Dimensions | 1300 × 550 × 1380 mm (W×D×H) |
| Light Source | Fluorescent UV Lamps (UVA-340 and/or UVB-313) |
| Exposure Mechanism | Condensation Cycle (Humid Hot Air + Backside Cooling) |
| Compliance Standards | GB/T 16422.3–1997, ASTM G53–88, GB/T 14522–93 |
| Safety Protections | Overload/short-circuit protection, Ground fault protection, Overtemperature cutoff, Low-water level shutdown, Compressor overpressure/overload protection |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | UV3 |
| Pricing | Upon Request |
| Temperature Range | RT+10 to 70 °C |
| Humidity Range | >90% RH |
| Sample-to-Lamp Distance | 50 ± 2 mm |
| Lamp Center-to-Center Spacing | 70 mm |
| Irradiance | UVA-340 @ 0.68 W/m², UVB-313 @ 0.60 W/m² |
| Interior Dimensions | 1170 × 450 × 500 mm (W×D×H) |
| Exterior Dimensions | 1300 × 550 × 1380 mm (W×D×H) |
| Construction | Stainless Steel Inner/Outer Chambers, Aluminum Frame Sample Holder |
| Control System | Intelligent Digital Controller with AI-PID Regulation, Dual-Mode (On/Off + Adaptive) |
| Safety Protections | Overcurrent, Ground Fault, Overtemperature, Low-Water, Compressor Overpressure |
| Compliance Standards | GB/T 16422.3–1997, ASTM G53–88, GB/T 14522–93 |
| Optional | UV Irradiance Sensor with Real-Time Feedback and Automatic Lamp Power Compensation |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | UV3 |
| Temperature Range | RT+10–70 °C |
| Humidity Range | >90% RH |
| Sample-to-Lamp Distance | 50 ± 2 mm |
| Lamp Center-to-Center Spacing | 70 mm |
| Irradiance | UVA-340 @ 0.68 W/m² (295–360 nm), UVB-313 @ 0.60 W/m² (280–315 nm) |
| Internal Chamber Dimensions | 1170 × 450 × 500 mm (W×D×H) |
| External Dimensions | 1300 × 550 × 1380 mm (W×D×H) |
| Construction | Stainless Steel Interior & Exterior, Aluminum Alloy Sample Rack |
| Control System | Intelligent Digital PID Controller with AI Algorithm, Dual-Mode Regulation (On/Off + Adaptive), Real-Time Irradiance Monitoring (Optional UV Radiometer) |
| Compliance | GB/T 16422.3–1997, ASTM G53–88, GB/T 14522–93 |
| Safety Protections | Overcurrent & Short-Circuit Protection, Ground Fault Detection, Overtemperature Cut-off, Low-Water Level Alarm, Compressor High-Pressure & Overload Protection |
| Brand | LabCompanion (Hongzhan Technology) |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Type | UV Thermal Aging Test Chamber |
| Internal Volume | 34 L |
| Temperature Range | UV Irradiation Zone: +50 °C to +75 °C |
| Condensation Zone | +40 °C to +60 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate | 1.0–3.0 °C/min |
| Compliance | CE-certified |
| Refrigerant | R404A / R23 (Montreal Protocol-compliant) |
| Control System | C100 PID + Fuzzy Logic Controller with Ethernet-enabled IoT expansion option |
| Safety Protections | Comprehensive multi-layer hardware and software safeguards including compressor high-pressure/overcurrent/overheat protection, phase sequence monitoring, leakage current interruption, independent chamber over-temperature/under-temperature cutoff, humidifier dry-run prevention, and water tank level sensing |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | UWTH-21 |
| Temperature Range | −55 °C to +85 °C |
| Humidity Range | 20–95 %RH |
| Refrigeration | Dual-stage cascade mechanical compression (water-cooled) |
| Power Supply | 380 V ±10 %, 50 Hz ±0.5 Hz |
| Total Power | 70 kW |
| Control Method | Balanced heating/humidification & cooling/dehumidification |
| Temp. Uniformity | ≤2 °C |
| Temp. Stability | ±0.5 °C (20–85 °C), ±1 °C (−55–20 °C) |
| RH Uniformity | ±5 %RH |
| Internal Dimensions (W×D×H) | 2500 × 3500 × 2400 mm |
| Chamber Volume | 21 m³ |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Region Classification | Domestic (China) |
| Model | VAC |
| Price Range | USD 1,150 – 2,900 |
| Max Operating Temperature | 150–200 °C |
| Temperature Range | Ambient +20 °C to 200 °C |
| Temperature Uniformity | ±2 °C |
| Temperature Fluctuation | ±1 °C |
| Temperature Deviation | ±2 °C |
| Heating Rate | 3 °C/min |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | W |
| Quotation | Upon Request |
| Internal Dimensions (D×W×H) | Customizable |
| Temperature Range | -70 °C to +150 °C |
| Temperature Uniformity | ±2 °C |
| Temperature Control Accuracy | ±1 °C |
| Heating Rate | 5 / 10 / 15 °C/min |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM Manufacturer |
| Product Category | Domestic |
| Model | Walk-In Environmental Test Chamber |
| Price | Upon Request |
| Temperature Range | −70 °C to +200 °C (optional up to +250 °C) |
| Refrigeration Method | Compressor-Based Cooling |
| Explosion-Proof Option | Standard (Non-Explosion-Proof) |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Deviation | ±2.0 °C |
| Brand | LabCompanion |
|---|---|
| Model | WG Series |
| Temperature Range | RT+20°C to +200°C or +400°C |
| Temperature Uniformity | ≤2.0°C at +200°C / ≤7.0°C at +400°C |
| Temperature Fluctuation | ≤±0.5°C |
| Internal Volume | 90 L to 300 L |
| Heating Method | Nickel-Chromium Alloy Heaters |
| Air Circulation | Forced-air, Triple-Side Airflow Duct System |
| Controller | Microprocessor-Based PID with PT100 Sensor |
| Safety | Independent Over-Temperature Protection, Over-Current Circuit Breaker |
| Compliance | GB/T 11158–1989, GB/T 2423.2–1989 |
| Brand | LabCompanion |
|---|---|
| Model | WGD Series |
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Pricing | Available Upon Request |
| Brand | LabCompanion |
|---|---|
| Model | WGD/SH Series |
| Origin | Guangdong, China |
| Manufacturer | LabCompanion (OEM/ODM Producer) |
| Compliance | GB/T 2423.3 (Constant Damp Heat Test Method for Electrical and Electronic Products) |
| Construction | Exterior – Powder-coated Cold-Rolled Steel |
| Control System | Fuji Electric PXR Series PID Temperature & Humidity Controller |
| Refrigeration | Imported Hermetic Scroll Compressor |
| Safety Protections | Thermal Fuse, Earth Leakage Circuit Breaker (ELCB), Fan Overheat Protection, Compressor High-Temperature Cut-off, Motor Overvoltage/Overcurrent/Overheat Protection |
| Dual-Mode Operation | Standalone Testing or Integrated with Tensile Testing Machines |
| Brand | LabCompanion |
|---|---|
| Model | WGD/SH Series |
| Origin | Guangdong, China |
| Manufacturer | LabCompanion (OEM/ODM Producer) |
| Compliance | GB/T 2423.3 (Constant Damp Heat Test) |
| Construction | Exterior – Powder-Coated Cold-Rolled Steel |
| Temperature Control System | Fuji Electric PXR Series PID Controller |
| Refrigeration System | Imported Hermetic Scroll Compressor |
| Safety Protections | Thermal Fuse, Earth Leakage Circuit Breaker (ELCB), Fan Overheat Protection, Compressor High-Temperature Cut-off, Motor Overvoltage/Overcurrent/Overheat Protection |
| Integration Capability | Compatible with Tensile Testing Machines (e.g., Instron, MTS) via I/O interface or standalone operation |
| Brand | LabCompanion |
|---|---|
| Model | WGS Series |
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Category | Domestic |
| Temperature Range | R.T.+20°C to 300°C |
| Temperature Uniformity | ±1.0°C @ +100°C, ±2.0°C @ +300°C |
| Temperature Stability | ≤±0.4°C |
| Heating Rate | ~70 min (to 300°C) |
| Internal Volume | 91–216 L |
| Construction | Cold-rolled steel cabinet with epoxy powder coating, SUS304 stainless steel chamber, rock wool insulation |
| Air Circulation | Four-sided forced-air duct system |
| Heating System | Ni-Cr alloy heaters |
| Control | Microcomputer-based PID controller with PT100 sensor, LED digital display, fixed-setpoint operation |
| Safety | Independent overtemperature cut-off, thermal circuit breaker |
| Power Supply | AC220V/380V, 50 Hz |
| Standard Accessories | 1 cable port cover, 2 adjustable shelves, user manual |
| Optional | Programmable temperature controller, additional shelves, observation window, RS232/RS485 interface |
| Compliance | GB/T 11158–1989, GB/T 2423.2–1989 (Test B), IEC 60068-2-2 (Test B) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Temperature Range | -73°C to +177°C |
| Refrigeration Method | Compressor-based Cooling |
| Explosion-Proof | Standard (Non-Explosion-Proof) |
| Temperature Fluctuation | ±0.5°C |
| Temperature Uniformity | ±2.0°C |
| Temperature Deviation | ±2.0°C |
| Heating Rate | 4–5°C/min |
| Cooling Rate | 4–5°C/min |
| Interior Dimensions (W×D×H) | 1970 × 2100 × 1020 mm |
| Certification | CE-compliant |
| Refrigerant | Environmentally Compliant HFC Blend |
| Humidity Control | Integrated Steam-Based Humidification System |
| Construction | Dual-Wall Insulated Stainless Steel Enclosure |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | WP-9000 |
| Internal Dimensions (D×W×H) | 1970×1970×2100 mm |
| Temperature Range | −70 °C to +150 °C |
| Temperature Uniformity | ±2 °C |
| Temperature Control Accuracy | ±0.5 °C |
| Heating Rate | 3 °C/min |
| Construction Type | Modular Prefabricated Walk-in Chamber |
| Cooling System | Dual-stage Cascade Refrigeration |
| Humidity Capability | Not Applicable (Dry Temperature-Only Configuration) |
| Compliance | Designed per IEC 60068-3-5, GB/T 2423.1 & GB/T 2423.2 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | WPH-12000 |
| Internal Dimensions (W×H×D) | 4000 × 2900 × 2800 mm |
| Temperature Range | -60°C to +150°C |
| Temperature Uniformity | ±2.0°C |
| Temperature Control Stability | ≤2°C |
| Heating Rate | 3°C/min (non-linear load) |
| Construction Type | Modular Prefabricated Walk-in Chamber |
| Humidity Range | 30–95% RH |
| Humidity Control Accuracy | ±3% RH (at 25–85% RH) |
| Standard Compliance | ASTM D4332, ISO 2231, IEC 60068-2-1/2/14/30, GB/T 2423.1/2/3/4 |