Food Specialized Instruments
Filter
Showing 61–90 of 796 results
| Brand | ANPRO |
|---|---|
| Origin | Sichuan, China |
| Manufacturer | ANPRO Biotechnology Co., Ltd. |
| Type | Domestic |
| Model | APN-P |
| Price | USD 8,300 (approx.) |
| Detection Principle | Colloidal Gold Immunochromatographic Assay (Quantitative Lateral Flow) |
| Detection Target | Lead (Pb) in Edible Oils |
| LOD | 0.02 ppm |
| Quantitative Range | 0–1 ppm |
| Display | Color Resistive Touchscreen |
| Data Output | Built-in Thermal Printer |
| Test Card Storage | Ambient Temperature (15–30 °C) |
| Regulatory Alignment | Compliant with GB 2762–2022 (National Food Contaminant Limits), aligned with ISO/IEC 17025 validation practices for rapid screening methods |
| Brand | METER Group, Inc. |
|---|---|
| Origin | USA |
| Model | Aqualab 4TE DUO |
| Measurement Principle | Chilled-Mirror Dew Point |
| Temperature Control | Dual-Zone Peltier (±0.1 °C) |
| Water Activity Range | 0.01–0.98 aw |
| Resolution | 0.001 aw |
| Moisture Content Accuracy | Up to 10× higher than gravimetric methods for hygroscopic matrices |
| Calibration Traceability | NIST-traceable saturated salt standards |
| Data Security | User-access levels, audit trail, password-protected settings |
| Compliance | Supports FDA 21 CFR Part 11, GLP/GMP documentation requirements |
| Sample Equilibration Time | <5 min typical |
| Power | 100–240 VAC, 50/60 Hz |
| Brand | Aqualab |
|---|---|
| Origin | USA |
| Model | 4TE DUO |
| Sensor Type | Mirror Condensation Dew Point Sensor |
| Accuracy (aw) | ±0.003 aw |
| Resolution (aw) | ±0.0001 aw |
| Measurement Range (aw) | 0.1000–0.9500 aw |
| Repeatability (aw) | ±0.001 aw |
| Moisture Content Resolution | ±0.01% |
| Moisture Content Repeatability | ±0.02% |
| Temperature Control Range | 15–50 °C |
| Temperature Accuracy | ±0.2 °C |
| Temperature Resolution | 0.01 °C |
| Sample Volume | 7 mL (max 15 mL) |
| Measurement Time | <5 min (avg. 2.5 min) |
| Data Storage Capacity | 8,000 readings |
| Display | 128×64 pixel backlit LCD |
| Interface | RS-232, USB |
| Dimensions | 26.7 × 17.8 × 12.7 cm |
| Weight | 3.18 kg |
| Power | 110–220 VAC, 50/60 Hz, <0.4 A |
| Operating Environment | 4–60 °C, 0–90% RH (non-condensing) |
| Certifications | CE |
| Warranty | 1 year (parts & labor) |
| Brand | Aqualab |
|---|---|
| Origin | USA |
| Model | Aqualab 4TE |
| Sensor Principle | Mirror Condensation Dew Point |
| Accuracy | ±0.003 aw |
| Resolution | 0.0001 aw |
| Measurement Range | 0.030–1.000 aw |
| Repeatability | ±0.001 aw |
| Temperature Control Range | 15–50 °C |
| Temperature Accuracy | ±0.2 °C |
| Temperature Resolution | 0.01 °C |
| Sample Volume | 7 mL (max 15 mL) |
| Measurement Time | <5 min (avg. 2.5 min) |
| Data Storage Capacity | 8,000 secure readings with timestamp, user ID, and calibration logs |
| User Accounts | Up to 25 configurable usernames/passwords |
| Interface | RS-232, USB |
| Display | 128×64-pixel backlit LCD |
| Dimensions | 26.7 × 17.8 × 12.7 cm |
| Weight | 3.18 kg |
| Power | 110–220 V AC, 50/60 Hz, <0.4 A |
| Operating Environment | 4–60 °C, 0–90% RH (non-condensing) |
| Certifications | CE, AOAC Official Method 975.13, FDA 21 CFR Part 11 compliant (audit trail, electronic signature support) |
| Brand | Aqualab |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Pawkit |
| Price Range | USD 1,400–7,000 (est.) |
| Sensor Type | Capacitive Hygrometric Sensor |
| Accuracy | ±0.02 aw |
| Resolution | ±0.01 aw |
| Measurement Range | 0.00–1.00 aw |
| Repeatability | ±0.01 aw (typical, per AOAC 978.17) |
| Sample Cup Volume | 7 mL (max. 15 mL) |
| Measurement Time | < 5 min |
| Display | 6-digit custom LCD (3-digit aw + 3-digit °C) |
| Dimensions | 6.6 × 10.7 × 2.0 cm |
| Weight | 115 g |
| Power Supply | Two 3 V CR2032 lithium coin cells (3-year typical service life) |
| Operating Environment | 4–60 °C |
| Certifications | CE Marked |
| Warranty | 1 year parts & labor (extendable) |
| Brand | Aqualab / METER Group |
|---|---|
| Origin | USA |
| Model | AquaLab Pre |
| Sensor Type | Mirror Condensation Dew Point (Standard), Capacitance (Optional) |
| Accuracy | ±0.01 aw (Dew Point), ±0.015 aw (Capacitance) |
| Resolution | 0.001 aw |
| Measurement Range | 0.05–1.000 aw |
| Repeatability | ≤ ±0.002 aw |
| Temperature Control | Fixed at 25.0 °C (±0.2 °C stability) |
| Temp. Resolution | 0.1 °C |
| Sample Volume | 7 mL recommended (max 15 mL) |
| Measurement Time | < 5 minutes |
| Display | 20-character alphanumeric backlit LCD |
| Interface | RS-232, USB |
| Dimensions | 24.1 × 22.9 × 8.9 cm |
| Weight | 3.2 kg |
| Power | 110–220 VAC, 50/60 Hz, < 0.4 A |
| Operating Environment | 4–60 °C, 0–90% RH (non-condensing) |
| Certifications | CE, AOAC Official Method 978.18 |
| Warranty | 1 year parts and labor |
| Brand | Aqualab |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Instrument |
| Model | AquaLab VSA |
| Price Range | USD 25,000 – 62,500 (converted at ~¥200,000–¥500,000) |
| Measurement Principle | Mirror Condensation Dew Point |
| Isotherm Methods | Dynamic Dew-point Isotherm (DDI) & Dynamic Vapor Sorption (DVS) |
| Accuracy | ±0.005 aw |
| Resolution | ±0.001 aw |
| aw Range | 0.030–0.950 |
| Repeatability | ±0.003 aw |
| Temperature Control | 10–60 °C (STP adjustable) |
| Temp Stability | ±0.1 °C |
| Max Operating Pressure | ≤7 psi |
| Sample Mass Range | 500–5000 mg |
| Mass Resolution | ±0.1 mg |
| Sample Cup Volume | 7.5 mL (recommended), up to 15 mL |
| Water Reservoir Volume | 7 mL (max 15 mL) |
| Display | 128×64-pixel backlit LCD |
| Dimensions | 25.4×38.1×30.5 cm |
| Enclosure | Machined aluminum frame with flame-retardant silicone resin |
| Weight | 14.97 kg |
| Power | 110–220 V AC, 50/60 Hz |
| Operating Environment | 4–60 °C, 10–90% RH (non-condensing) |
| Certifications | CE |
| Warranty | 1 year (parts & labor) |
| Brand | AQUAREAD |
|---|---|
| Origin | Japan |
| Model | MAO-1A |
| Measurement Range | 0–12 mm |
| Resolution | 0.01 mm |
| Display | Digital LCD |
| Probe Material | Precision Alloy |
| Haugh Unit Calculation | Manual via integrated scale (based on albumen height and egg weight) |
| Compliance | Designed for ASTM E1695-08 (Standard Practice for Determination of Haugh Units), ISO 6497:2002 (Animal feeding stuffs — Sampling), and aligned with USDA Agricultural Handbook No. 75 and EU Regulation (EC) No. 589/2008 Annex IV criteria for egg classification |
| Brand | Armfield |
|---|---|
| Origin | United Kingdom |
| Model | FT110X |
| Extraction Volume | 1 L |
| Operating Temperature | Ambient (20–25 °C) |
| Maximum Pressure | 100 bar |
| Solvent Compatibility | Ethanol, Glycerol, Water, and other GRAS/food-grade solvents |
| Control System | Microprocessor-based with real-time digital display |
| Safety Features | Automatic pressure regulation, fault detection, and audible/visual alarm |
| Compliance | Designed for GLP-compliant laboratories |
| Brand | Armfield |
|---|---|
| Origin | United Kingdom |
| Model | FT141 / FT142 |
| Capacity | 10 L or 20 L (selectable) |
| Heating | Steam-jacketed (indirect) + optional direct steam injection |
| Cooling | Water-cooled jacket |
| Vacuum capability | Yes, integrated vacuum system |
| UHT function | FT142 only, up to 140 °C at 3 bar |
| Shear mechanism | High-shear rotor-stator emulsifier with adjustable speed |
| Agitation | Dual-stage — top-mounted light-duty agitator with retractable scraper blades + high-speed homogenizing impeller |
| Sealing | Hygienic mechanical shaft seal with water flush |
| Control | PLC-based electronic control panel with HMI interface |
| Compliance | Designed to meet 3-A Sanitary Standards (hygienic design principles), suitable for GLP-compliant pilot-scale development |
| Brand | Armfield |
|---|---|
| Origin | United Kingdom |
| Model | FT174X |
| Flow Rate | 12–60 L/h (water-equivalent) |
| Max Processing Temperature | >150 °C |
| Heating Methods | Direct steam injection (DSI) and/or indirect (tubular & plate heat exchangers) |
| Sterilization Mode | Aseptic processing capable |
| Configuration | Modular, reconfigurable via sanitary quick-connect fittings and flexible product tubing |
| Control Interface | Touchscreen HMI with stage-based operator prompts |
| Optional Modules | In-line homogenizer, pre-heater, condenser, CIP system, USB data logging, electronic flow meter |
| Compliance | Designed to meet hygienic design principles per EHEDG Guideline Doc. 8 and 3-A Sanitary Standards 01-05 |
| Brand | Armfield |
|---|---|
| Origin | United Kingdom |
| Model | FT18MKII |
| Maximum Operating Pressure | 50 bar |
| Membrane Module Options | Ceramic, Spiral-Wound, Hollow-Fiber, Tubular |
| CIP Capability | Yes |
| Backwash Capability | Select Modules |
| Transmembrane Pressure (TMP) Monitoring | Yes (Inlet/Outlet of Retentate & Permeate Lines) |
| Permeate Flow Measurement | Electronic Flowmeter + Optional Mass-Balance Mode |
| Data Logging | Full Sensor Array with Timestamped Export |
| Software Integration | Armfield PC-Based Control & Visualization Suite |
| Brand | Armfield |
|---|---|
| Origin | United Kingdom |
| Model | FT19 |
| Type | Batch Autoclave for Liquid Bottled Products |
| Application | Thermal Sterilization of Milk and Similar Beverages |
| Brand | Armfield |
|---|---|
| Origin | United Kingdom |
| Model | FT22 |
| Evaporator Tube Length | 1.36 m |
| Heat Transfer Area | 0.08 m² |
| Evaporation Rate | 10 L/h |
| Steam Consumption | 15 kg/h |
| Operating Steam Pressure | 1.7 bar |
| Condenser Area | 0.17 m² |
| Feed Tank Capacity | 30 L |
| Concentrate Tank Capacity | 5.0 L |
| Condensate Tank Capacity | 5.0 L |
| CIP Pump Flow Rate | 8 L/min (20 ft H₂O) |
| System Vacuum | 225 mmHg |
| Power Supply (FT22-A) | 220–240 V / 1-phase / 50 Hz / 3 kW |
| Power Supply (FT22-B) | 120 V / 1-phase / 60 Hz / 3 kW |
| Height | 2.6 m |
| Width | 0.78 m |
| Depth | 0.65 m |
| Gross Weight | 330 kg |
| Shipping Volume | 2.40 m³ |
| Brand | Armfield |
|---|---|
| Origin | United Kingdom |
| Model | FT28 |
| Type | Laboratory-Scale Continuous Screw Press |
| Application | Edible Oil Extraction from Oilseeds |
| Capacity | 1–5 kg/h (typical, depending on seed moisture and oil content) |
| Screw Diameter | 28 mm |
| Motor Power | 0.37 kW |
| Speed Control | Variable Frequency Drive (0–60 rpm) |
| Construction | AISI 304 Stainless Steel Contact Parts |
| Feed Hopper Volume | 2 L |
| Dimensions (W×D×H) | 450 × 320 × 680 mm |
| Weight | 42 kg |
| Brand | Armfield |
|---|---|
| Origin | United Kingdom |
| Model | FT30MKIII |
| Construction | All-Glass Enclosure |
| Design Type | Benchtop Laboratory Spray Dryer |
| Observation Capability | Real-Time Visual Monitoring of Drying Process |
| Feed Capacity | Up to 500 mL/h (Typical Aqueous Solutions) |
| Inlet Temperature Range | 40–220 °C (Adjustable in 1 °C Increments) |
| Outlet Temperature Range | 30–120 °C |
| Atomization | Two-Fluid Nozzle (Compressed Air-Assisted) |
| Drying Chamber Diameter | 120 mm |
| Collection Efficiency | >95% for Particles >1 µm |
| Power Supply | 230 V AC, 50/60 Hz |
| Brand | Armfield |
|---|---|
| Origin | United Kingdom |
| Model | FT32 |
| Heating Method | Steam-heated |
| Configuration | Twin-drum rotary dryer |
| Application | Laboratory-scale drying and moisture removal studies |
| Brand | Armfield |
|---|---|
| Origin | United Kingdom |
| Model | FT40 |
| Batch Capacity | 5–20 L |
| Jacket Temperature Range | 1 °C to 85 °C |
| Vessel Material | 316 Stainless Steel |
| Integrated Mixer | Silversen™ High-Shear Impeller |
| Control System | Onboard Touchscreen HMI with Data Logging |
| Heating/Cooling | Dual-Purpose Thermostatic Jacket |
| Compliance | Designed for GLP/GMP-aligned laboratory-scale food process development |
| Brand | Armfield |
|---|---|
| Origin | United Kingdom |
| Model | FT74XTS |
| Maximum Sterilization Temperature | 150 °C |
| Product Flow Rate | 20 L/h |
| CIP Flow Rate | 120 L/h |
| Sterilization Capacity | 50 L/h (with plate heat exchanger) |
| Holding Time Display | Yes |
| F₀ Calculation & Display | Yes |
| Touchscreen Interface | 800 × 480 px Full-Color LCD |
| Pre-set Programs | 32 |
| Data Logging | USB Storage (standard), PC Connectivity (optional) |
| Flow Measurement | Electromagnetic Flow Sensor |
| Holding Tube | Adjustable |
| Cooling Stages | Single-stage standard, dual-stage optional |
| Heat Exchanger Configurations | Interchangeable plate or tubular modules |
| CIP System | Integrated high-pressure hot water recirculation |
| Enclosure | Integrated stainless-steel cabinet |
| Environmental Rating | IP54-rated for humid laboratory environments |
| Level Sensing | Product tank ultrasonic level sensor |
| Brand | Armfield |
|---|---|
| Origin | United Kingdom |
| Model | FT80/81 |
| Configuration | Dual-mode (Spray Drying or Spray Cooling) |
| Chamber Aspect Ratio (Height | Diameter): 3:1 |
| Discharge Section | Conical |
| Atomization | Twin-Fluid Nozzle System (Co-current & Counter-current Configurable) |
| Air Handling | Independently Variable-Speed Inlet & Exhaust Fans |
| Filtration Option | Bag Filter Kit Available |
| Monitoring | Integrated Relative Humidity Sensor at Inlet |
| Safety | Spark Arrestor on Inlet Fan |
| Enclosure Rating | IP65 Control Console |
| Data Logging | Full Parameter Recording with USB/PC Export Capability |
| Noise Level | Low-Noise Operation |
| Cleanability | Tool-Free Disassembly for Inspection & Cleaning |
| Mobility | Compact, Wheeled Base Design |
| Compliance Support | Designed for GLP-aligned lab environments |
| Brand | Armfield |
|---|---|
| Origin | United Kingdom |
| Model | FT9 |
| Production Capacity | 45 L/h |
| Maximum Operating Pressure | 70 bar (1015 psi) |
| Homogenization Index (whole milk) | ≤5.0% |
| Feed Tank Capacity | 4.5 L stainless steel (hygienic grade) |
| Pressure Gauge Range | 0–300 bar |
| Motor Power | 0.18 kW |
| Electrical Supply | FT9-A: 220–240 V / 1Φ / 50 Hz |
| FT9-B | 120 V / 1Φ / 60 Hz |
| Dimensions (H×W×L) | 0.56 × 0.56 × 0.41 m |
| Net Weight | 60 kg |
| Material | Hardened stainless steel cylinder, valve, and plunger |
| Homogenization Index compliance | Meets ISO 5530-1 for fat globule size distribution assessment in dairy emulsions |
| Brand | FUNKE GERBER |
|---|---|
| Origin | Italy |
| Model | CryoSpecial 1 |
| Sample Volume | 2–2.5 mL |
| Measurement Principle | Freezing Point Depression (Colligative Property) |
| Temperature Range | +5 °C to +36 °C |
| Resolution | ±0.0005 °C |
| Reproducibility (Raw Milk) | ±0.0025 °C |
| Analysis Time | ~2 min (after preheating) |
| Preheat Time | ~5 min |
| Output Units | °C, °H, % Water Addition |
| Interface | RS232 |
| Power Supply | 220 V / 50 Hz / 150 W |
| Dimensions (W×D×H) | 29 × 44 × 33 cm |
| Weight | ~13 kg |
| Cooling System | Peltier-based, Continuous Circulation |
| Compliance | IDF-ISO 5764:2009, AFNOR, GB 5413.38–2010 |
| Certification | Verified by China National Institute of Metrology |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | DOM-24 |
| Measurement Parameters | TPM (% w/w) and Acid Value (mg KOH/g oil) |
| Compliance | Designed for GB 7102.1–2003, ISO 8534, AOCS Cd 3d-63 |
| Interface | NFC (Android-compatible), USB-C data export |
| Construction | Titanium alloy housing |
| Operating Distance | ≥30 cm from hot oil surface |
| Intended Use | On-site frying oil monitoring in food service, regulatory inspection, and QC laboratories |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | DOM-24 (Edible Oil TPM & Acid Value Analyzer) |
| Measurement Parameters | TPM (%), Acid Value (mg KOH/g) |
| Compliance | Designed for GB 7102.1–2003, ISO 660, AOCS Cd 3d-63 |
| Interface | NFC (Android-compatible), USB-C data export |
| Construction | Titanium alloy housing |
| Safety Distance | ≥30 cm during measurement |
| Weight | <350 g |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | DOM-24 |
| TPM Range | 0.5–40.0% |
| AV Range | 0.00–9.99 |
| Temperature Range | 0–225°C |
| TPM Accuracy | ±2.0% (20–200°C) |
| AV Accuracy | ±0.2 |
| Temperature Accuracy | ±1°C |
| TPM Resolution | 0.5% |
| AV Resolution | 0.01 |
| Temp. Resolution | 1°C |
| IP Rating | IP67 |
| Power | 2×AAA alkaline batteries |
| Dimensions | Ø22×490 mm |
| Weight | 400 g (host only) |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | DOM-24 |
| Measurement Parameters | TPM% (0.5–40.0%), AV (0.00–9.99), Temperature (0–225°C / 32–437°F) |
| Accuracy | TPM ±2.0% (20–200°C), AV ±0.2, Temp ±1°C |
| Resolution | TPM 0.5%, AV 0.01, Temp 1°C |
| IP Rating | IP67 |
| Power | 2×AAA alkaline batteries |
| Dimensions & Weight | Ø22×490 mm, 400 g (host only) |
| NFC | Android-compatible near-field communication |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | DOM-24 Frying Oil Analyzer |
| Measurement Parameters | Total Polar Materials (TPM) % and Acid Value (AV) |
| Principle | Dielectric Constant-Based Non-Destructive Detection |
| Sample Contact | Immersion Probe (30 cm Handle for Operator Safety) |
| Compliance | Designed for ISO 8534, AOCS Cd 19a-99, and EU Regulation (EU) No 1881/2006 Monitoring Guidance |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | DOM-24 |
| Measurement Parameters | Total Polar Materials (TPM) and Acid Value (AV) |
| Principle | Refractive Index–Based Correlation with TPM & Potentiometric Titration–Derived AV |
| Temperature Compensation | Automatic (ATC, 0–100°C) |
| Power Source | Rechargeable Lithium-ion Battery |
| Dimensions | 168 × 82 × 42 mm |
| Weight | Approx. 320 g |
| Compliance | Meets JIS K 2501, ISO 8534, and aligns with EU Regulation (EU) No 1881/2006 for polar compound limits in frying oils |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | DOM-24 |
| Measurement Parameters | TPM (%) and Acid Value (mg KOH/g) |
| Compliance | Designed to support verification against GB/T 7102.1–2003, EU Regulation (EC) No. 156/2013, and Codex Alimentarius standards for frying oil safety |
| Construction | Titanium alloy housing |
| Connectivity | NFC (Android-compatible), USB-C data export |
| Operating Distance | Non-contact measurement at ~30 cm |
| Weight | <250 g |
| Power | Rechargeable Li-ion battery (≥8 hours continuous use) |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | NAR-3T |
| Refractive Index Range (nD) | 1.30000–1.71000 |
| Brix Range | 0.00–95.00% |
| nD Resolution | 0.0002 |
| Brix Resolution | 0.1% |
| nD Accuracy | ±0.0001 |
| Brix Accuracy | ±0.05% |
| Temperature Measurement Range | 5–50°C |
| Temperature Display Range | 0.0–50.0°C |
| Temp. Accuracy | ±0.2°C |
| Temp. Resolution | 0.1°C |
| Power Supply | AC 100–240 V, 50/60 Hz |
| Power Consumption | 5 VA |
| Dimensions (Main Unit) | 12 × 31 × 25 cm |
| Weight (Main Unit) | 9.0 kg |
| Dimensions (Temp. Display Unit) | 10 × 11 × 7 cm |
| Weight (Temp. Display Unit) | 0.5 kg |