- All
- Favorite
- Popular
- Most rated
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported Instrument |
| Model | STARVISC 200-2.5 control |
| Max. Stirring Volume (H₂O) | 100 L |
| Motor Input Power | 130 W |
| Motor Output Power | 84 W |
| Drive Type | Brushless DC Motor |
| Speed Range I (50/60 Hz) | 6–400 rpm |
| Speed Range II (50/60 Hz) | 30–2000 rpm |
| Speed Control | Continuously Variable |
| Speed Accuracy | ±1 rpm (n > 300 rpm) |
| Speed Measurement Deviation | ±1% (n > 300 rpm) |
| Max. Torque Range I | 200 N·cm |
| Max. Torque Range II | 40 N·cm |
| Torque Measurement Deviation | ±2.5 N·cm |
| Viscosity Range | Up to 100,000 mPa·s |
| Temperature Measurement | PT1000 sensor (DIN IEC 751 Class A), -10 to +350 °C, accuracy ±0.5 K |
| Temp. Resolution | 0.1 K |
| Housing | Cast aluminum with thermoplastic polymer coating |
| IP Rating | IP40 |
| Dimensions (W×H×D) | 91 × 395 × 231 mm |
| Weight | 5.9 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80% RH |
| Interfaces | RS232, USB |
| Remote Control Range | Up to 150 m (line-of-sight dependent) |
| Continuous Duty Cycle | 100% |
| Hollow Shaft Diameter | 10.3 mm |
| Clamp Jaw Range | 0.5–10 mm |
| Extension Arm | Ø16 mm × 220 mm |
| Timer Range | 1–6000 min |
| Certifications | DIN EN 60529, CE-compliant |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Model | HBR 4 control |
| Heating Power | 1000 W |
| Max. Bath Volume | 4 L |
| Temp. Range | RT to 200 °C |
| Temp. Control Accuracy | ±1 K (water, 3 L @ 90 °C) / ±2 K (silicone oil, 3 L @ 150 °C) |
| Stirring Speed Range | 150–800 rpm |
| Stirring Motor Output | 1 W |
| Safety Cut-off Range | 50–210 °C |
| Protection Class | DIN 12877 Class II |
| IP Rating | IP20 |
| Dimensions (W×D×H) | 340 × 250 × 340 mm |
| Weight | 4.4 kg |
| Power Supply | 230/115/100 V, 50/60 Hz |
| Interface | RS 232 |
| External Sensor Support | PT1000 |
| Material (Wetted Parts) | Stainless Steel 1.4301 (AISI 304) |
| Minimum Fill Level | 20 mm |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported |
| Model | labworldsoft® 6 Pro |
| Pricing | Available Upon Request |
Show next