Industry-specific Instruments
Filter
Showing 481–510 of 6027 results
| Brand | Bigdipper |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HBD5ms2100 sMS |
| Water Activity Range | 0.000–1.000 aw |
| Accuracy | ±0.015 aw |
| Repeatability | ±0.005 aw |
| Resolution | 0.001 aw |
| Moisture Content Range | 0.0–100.0% (w/w) |
| Moisture Accuracy | ±2.0% abs |
| Moisture Repeatability | ±0.5% abs |
| Moisture Resolution | 0.1% |
| Operating Temperature | −20 to +85 °C (moisture extension up to 200 °C) |
| Environmental Operating Range | −10 to +60 °C, 0–99% RH |
| Test Modes | Rapid, Pre-cut, Equilibrium |
| Typical Rapid Test Time | 3–5 min |
| Power Supply | Rechargeable NiCd battery (HBD5 variant), 24 h continuous operation, 1 week standby |
| Intrinsic Safety Rating | Ia, suitable for Class 1, Groups A/B/C/D and Class 2, Groups E/F/G hazardous locations |
| Enclosure Rating | NEMA 2 |
| Data Storage | Non-volatile memory (2 MB), power-loss protected |
| Communication Interface | RS-232 / RS-485 |
| Sensor Architecture | Polymer-based capacitive humidity sensor with integrated temperature compensation |
| Calibration | Factory-calibrated |
| Brand | BINDER |
|---|---|
| Origin | Germany |
| Model | VDL-23 |
| Interior Volume | 23 L |
| Interior Dimensions (W/H/D) | 285 × 285 × 285 mm |
| Temperature Range | +5 °C to 200 °C |
| Temperature Accuracy | ≤ ±0.4 °C |
| Temperature Uniformity @100 °C | ±2.0 °C |
| Temperature Uniformity @200 °C | ±4.0 °C |
| Max. Vacuum Level | 1 × 10⁻² mbar |
| Vacuum Flange Port (DN) | 16 mm |
| Gas Inlet Port (PR) | 3/8″ |
| Compressed Air Connection | Ø8 mm, 50 L/min |
| IP Rating | IP54 (DIN EN 60529) |
| Power Supply | 230 V, ±10 %, 50/60 Hz |
| Rated Power | 800 W |
| Net Weight | 63 kg |
| Standard Shelves | 2 (up to 4 optional) |
| Shelf Load Capacity | 20 kg per shelf |
| Total Load Capacity | 35 kg |
| Shelf Spacing | 53 mm |
| Shelf Usable Area (W × D) | 234 × 280 mm |
| Heating Time to 100 °C | 66 min |
| Heating Time to 200 °C | 90 min |
| Brand | Binzhenghong |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | OEM Producer |
| Model | JUPITER (A/B) |
| Design Pressure | 15 MPa (2200 psi) |
| Design Temperature | 300 °C |
| Inner Vessel Capacity | 100 mL |
| Inner Vessel Material | TFM-modified Polytetrafluoroethylene |
| Outer Vessel Material | High-Strength Aerospace-Grade Composite Fiber |
| Rotor Compatibility | 10-position or 12-position JP-100 rotors |
| System Compatibility | JUPITER BF and JUPITER BC microwave digestion systems |
| Brand | Binzhenghong |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | NJ-DBF-I / NJ-DBF-II |
| Heating Surface Material | Precision Cast Aluminum or High-Purity Graphite |
| Maximum Operating Temperature | 260 °C |
| Temperature Control Accuracy | ±1 °C |
| Heating Zone Dimensions | 600×400 mm, 400×300 mm, 450×350 mm (customizable) |
| Power Rating | 2 kW / 3 kW |
| Input Voltage/Frequency | 220 V / 50 Hz |
| Continuous Operation Time | Up to 48 h |
| Control Interface | Digital PID Controller with LED Display |
| Structural Design | Split Configuration (Heater Base + Remote Controller) |
| Corrosion Protection | Full PTFE (Teflon®) Coating on All Exposed Surfaces |
| Foot Design | PTFE-Coated Adjustable Feet |
| Cable Assembly | PFA-Insulated Signal & Power Cables (Standard 1.5 m |
| Connector Type | Aviation-Grade Sealed Connector |
| Optional Accessories | PTFE-Coated Multi-Well Sample Holder Kits (e.g., 2×200×300 mm for 600×400 mm Plate) |
| Brand | Binzhenghong |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Producer |
| Model | NJ-ZH-1 |
| Compliance | JJF 1175, HJ/T 299–2007, HJ/T 300–2007, HJ/T 557–2007 |
| Diameter | 200 mm |
| Mesh Range | 4–35 mesh (4.75 mm – 0.500 mm aperture) |
| Material | PTFE-coated stainless steel mesh with PTFE base and lid |
| Brand | BioControl |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Assurance GDS |
| Pricing | Available Upon Request |
| Brand | Biolab |
|---|---|
| Model | Pasol |
| Test Methods | ASTM D2272 (RPVOT), ASTM D4742 (TFOUT), ASTM D942, ASTM D2112, IP 229, SH/T 0193 |
| Temperature Range | Up to 200 °C (metal bath heating) |
| Safety Features | Overtemperature & overpressure lockout, automatic venting of hazardous gases, insulated stainless-steel test chamber |
| Automation | Auto-oxygen pressurization, real-time pressure/temperature monitoring, endpoint detection, report generation (JPEG + parameter-rich PDF), USB/Ethernet connectivity (up to 12 units) |
| Software | Windows-based touchscreen interface with method library, audit-ready data logging, and GLP-compliant reporting |
| Brand | Biolab |
|---|---|
| Model | Viscol-10A |
| Application | Fuel & Lubricant Testing |
| Temperature Control Points | 40 °C and 100 °C |
| Measurement Principle | Capillary Flow Timing (ASTM D445 / ISO 3104) |
| Viscosity Index Calculation | Integrated |
| Automation Level | Fully Automated (Measurement, Rinse, Calibration, Drain) |
| Compliance | ASTM D445, ISO 3104, IP 71, GB/T 265 |
| Temperature Stability | ±0.01 °C |
| Timing Resolution | 0.01 s |
| Sample Capacity | Up to 6 positions (configurable) |
| Cleaning Protocol | Solvent-based automated rinse cycle |
| Data Output | CSV, PDF report with VI, kinematic viscosity (mm²/s), and instrument metadata |
| Origin | Shandong, China |
|---|---|
| Supplier Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Pricing | Available Upon Request |
| Brand | Biotai |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | CUKA-IX |
| Price Range | USD 21,000 – 28,000 |
| Grain Types Supported | Wheat, Corn, Paddy Rice, Soybean, Peanut, Sunflower Seed |
| Detection Targets | Insect-Damaged Kernels, Diseased Kernels (Black Germ, Gibberella-Damaged), Broken Kernels, Sprouted Kernels, Moldy Kernels, Heat-Damaged Kernels |
| Imaging System | Conveyor-Based Linear High-Resolution Scan |
| Spatial Resolution | 0.024 mm |
| Throughput | Full Sample Analysis in ≤120 s |
| User Interface | Capacitive Touchscreen with Onboard Data Storage |
| Automation | Auto-Start on Feed Detection, Auto-Stop Post-Analysis |
| Traceability | Full Audit Trail of Operator Actions and Measurement Events |
| Compliance Framework | Designed to Support ISO 712, ISO 6540, GB/T 5494–2019, and AACCI Method 47–01 workflows |
| Brand | Charles River |
|---|---|
| Origin | USA |
| Manufacturer | BioTek Instruments, Inc. |
| Type | Imported |
| Model | BioTek® ELx808IU |
| Pricing | Available upon Request |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | BIR-50 |
| Price Range | USD 105,000 – 140,000 (FOB Yokohama) |
| Illumination Mode | Pulsed Operation |
| Brand | BJBY |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | BY-2012ATP |
| Detection Range | 0–9999 RLU |
| Detection Limit | 5×10⁻¹⁵ mol ATP |
| Detection Time | ≤15 s |
| Accuracy | ±5 RLU |
| Operating Temperature | 5–40 °C |
| Operating Humidity | 20–85 % RH |
| ATP Recovery Rate | 90–110 % |
| Display | Large Backlit LCD |
| User Accounts | 50 |
| Custom Limits | 250 |
| Data Storage Capacity | 2000 test records |
| Pass/Fail Auto-Judgment | Yes |
| Built-in Self-Calibration Light Source | Yes |
| Self-Test at Power-On | Yes (30 s) |
| Interface | RS232 + USB |
| Dimensions (W×H×D) | 192 × 87 × 34 mm |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Regional Origin | Domestic (PRC) |
| Model | BLD-1000 |
| Price Range | USD 1,400–7,000 |
| Instrument Type | Portable |
| Measurement Time | ≤0.2 s |
| Sample Mass | 1000 ±2 g |
| Hopper Orifice Diameter (Small Grain) | 30 mm |
| Hopper Orifice Diameter (Large Grain) | 40 mm |
| Grain Cylinder Volume | 1000 ±1.5 mL |
| Resolution | 1 g |
| Power Consumption | 10 W |
| Operating Temperature | 5–40 °C |
| Relative Humidity | <90% RH |
| Power Supply | AC 220 V, 50 Hz |
| Rechargeable Battery | Integrated (Li-ion, optional operation mode) |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | BLD-B2103 |
| Price Range | USD 2,800 – 7,000 |
| Net Weight | 25 kg |
| Distiller Power | 800 W |
| Four-Position Digestion Block Power | 1500 W |
| Eight-Position Digestion Block Power | 3000 W |
| Four-Position Digestion Block Dimensions | 650 × 220 × 150 mm |
| Eight-Position Digestion Block Dimensions | 730 × 300 × 150 mm |
| Distiller Dimensions | 380 × 330 × 820 mm |
| Operating Voltage | AC 220 V, 50 Hz |
| Brand | TUHUA |
|---|---|
| Origin | Hubei, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Manufacture | China |
| Model | CT3001A / CT2001B |
| Voltage Range | 0–5 V |
| Current Range | ±5 A |
| Measurement Accuracy | ±0.05% of full scale |
| Power Supply | AC 220 V ±10%, 50/60 Hz |
| Communication Interface | RS485 / Ethernet (optional) |
| Operating Temperature | 0–40 °C |
| Relative Humidity | ≤85% RH (non-condensing) |
| Origin | Norway |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Blueye Pro |
| Pricing | Available Upon Request |
| Brand | Boante |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Quotation | Upon Request |
| Temperature Range (Dark) | 0–70°C |
| Temperature Range (Illuminated) | 10–70°C |
| Humidity Range (Dark) | 30–95% RH |
| Humidity Range (Illuminated) | 40–95% RH |
| Temperature Uniformity | ±1.0°C (≤1050 L) / ±1.5°C (1050 L model) |
| Humidity Uniformity | ±5% RH |
| Temperature Fluctuation | ≤±0.5°C |
| Humidity Fluctuation | ≤±3% RH |
| Illuminance Control (ZYP models) | 0–10,000 lux (adjustable), ±500 lux tolerance |
| UV Spectrum (Optional) | 320–400 nm |
| UV Irradiance (Optional) | 0–2 W/m² |
| Internal Volume | 100–1050 L |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Compliance | ICH Q1A(R3), Q1B, USP <1151>, Chinese Pharmacopoeia (2020 Ed.), GMP Annex 11, ISO 9001 |
| Brand | Boante |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Pricing | Upon Request |
| Temperature Range (Dark) | 0–70°C |
| Temperature Range (Illuminated) | 10–70°C |
| Humidity Range (Dark) | 30–95% RH |
| Humidity Range (Illuminated) | 40–95% RH |
| Temperature Uniformity | ±1.0–±1.5°C |
| Humidity Uniformity | ±5% RH |
| Illuminance Control | 0–10,000 lux (LED, continuously adjustable) |
| Illuminance Accuracy | ±500 lux |
| UV Spectrum Option | 320–400 nm (optional) |
| UV Irradiance | 0–2 W/m² (optional) |
| Compliance | ICH Q1A(R3), Q1B, USP <1151>, Chinese Pharmacopoeia (2020 Ed.), GMP Annex 11, ISO 9001, FDA 21 CFR Part 11 (audit trail enabled) |
| Brand | BOE-THERM |
|---|---|
| Origin | Denmark |
| Model | Temp 150 |
| Max Operating Temperature | 150°C (±0.8°C) |
| Heating Power | 3 kW (expandable to 6 kW / 9 kW) |
| Oil Tank Capacity | 14 L (3 kW) / 19 L (6–9 kW) |
| Pump Pressure | 3.8–4.4 bar (up to 6.0 bar with TM8 pump) |
| Flow Rate | 60–80 L/min |
| Cooling Capacity | 23 kW (standard) / 35 kW (enhanced heat exchanger) |
| Control Interface | 4–20 mA analog input/output, MODBUS RTU, Profibus-DP V1, Ethernet/IP, PROFINET with IRT |
| Safety Certifications | CE (EN 60204-1:2018), ISO 9001:2015, optional ATEX Ex d IIB T4 |
| IP Rating | IP54 (standard control cabinet), IP65 (optional) |
| Noise Level | ≤60 dB(A) |
| Thermal Loss | <5% |
| Power Supply | 3-phase 400 V / 50 Hz or 480 V / 60 Hz (customizable) |
| Brand | ph-instruments |
|---|---|
| Origin | Denmark |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Industrial Equipment |
| Model | TEMP 300 |
| Heating Power Options | 6–36 kW (6/9/12/18/24/36 kW) |
| Max Operating Temperature | 300°C (±1°C PID control) |
| Thermal Fluid | Synthetic high-temp heat transfer oil (YD-400 series) |
| Protection Rating | IP54 (control cabinet) / IP65 (heating chamber) |
| Circulation Pump | P3/P4 high-pressure pump, max flow 66 L/min, max pressure 3.4–4.4 bar |
| Cooling System | I2/I4 heat exchanger, cooling capacity 36–72 kW at ΔT = 250°C |
| Process Interface | 1/2" BSP (hot side), Cooling Interface: 3/8" BSP (coolant side) |
| Power Supply | 3-phase 400 V, 50 Hz (optional 480 V, 60 Hz) |
| Dimensions (L×W×H) | ≤12 kW: 855×330×890 mm |
| ≤36 kW | 855×495×985 mm |
| Net Weight | 98 kg (12 kW), 165 kg (36 kW) |
| Certifications | CE (EN 60204-1:2018 & EN 60519-1:2015), ISO 9001:2015, optional ATEX |
| Key Features | Multi-layer thermal insulation (<3% heat loss), micro-positive pressure operation (<5 bar), industrial-grade noise reduction (≤58 dB), automatic oil level compensation, vacuum-run protection, programmable cooling, rapid mold drain, external PT100 input, runtime meter, 20 mA serial interface, 4–20 mA analog output, Profibus-DP, Ethernet/IP, Profinet, DeviceNet |
| Brand | BOE-THERM |
|---|---|
| Origin | Denmark |
| Model | TEMP 350 |
| Max. Operating Temperature | 350°C (±1.2°C PID control) |
| Heating Power Options | 9–36 kW |
| Thermal Fluid | YD-450 series synthetic heat transfer oil |
| Insulation Efficiency | <2.5% heat loss |
| System Pressure | Micro-positive pressure ≤4.5 bar |
| Noise Level | ≤55 dB(A) |
| Protection Rating | IP54 (control cabinet) / IP66 (heating chamber) |
| Pump Types | P3 (≤18 kW) / P4 (≤36 kW) |
| Max. Flow Rate | 66 L/min |
| Max. Discharge Pressure | 3.4 bar (P3) / 4.4 bar (P4) |
| Cooling Capacity at ΔT=250°C | 36 kW (I2) / 72 kW (I4) |
| Heat Exchange Area | 3.2 m² (I2) / 6.4 m² (I4) |
| Electrical Supply | 3-phase 400 V, 50 Hz (optional 480 V, 60 Hz) |
| Certifications | CE (EN 60204-1:2018, EN 60519-1:2015), ATEX II 2G Ex db IIC T4, PED 2014/68/EU, ISO 9001:2015 |
| Brand | BOE-THERM |
|---|---|
| Origin | Denmark |
| Model | Temp_160S_Touch |
| Max. Operating Temperature | 160°C (±0.5°C) |
| Heating Power | 4.5 kW (expandable to 9/13.5/18 kW) |
| Pump Type | Magnetically Driven Centrifugal Pump (Q9) |
| Max. Flow Rate | 90 L/min |
| Max. Pressure | 8.0 bar |
| Cooling Capacity (B4) | 81 kW |
| Heat Transfer Medium | Ultrapure Water (>15 MΩ·cm) |
| System Volume | 6 L (with expansion compensation) |
| Power Supply | 3-phase 400 V / 50 Hz or 460 V / 60 Hz |
| Dimensions (L×W×H) | 680 × 270 × 640 mm |
| Noise Level | ≤65 dB(A) at 1 m |
| Certifications | CE (2014/35/EU), UL (E492831), ISO 9001:2015 |
| Brand | BONAPACE |
|---|---|
| Origin | Italy |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | INCAP |
| Pricing | Available Upon Request |
| Brand | Bonnot |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Equipment |
| Model | 6CE |
| Pricing | Available Upon Request |
| Brand | Bonnot |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | Catalyst Extruder |
| Pricing | Available Upon Request |
| Brand | Bosin |
|---|---|
| Model | BS |
| Origin | Shanghai, China |
| Compliance | NY/T 1180–2006 (PRC Agricultural Industry Standard) |
| Max Load Capacity | ≥49 N |
| Force Resolution | ≤0.0098 N |
| Force Accuracy | ±0.02% FS |
| Shear Blade Thickness | 3.0 ± 0.2 mm |
| Blade Included Angle | 60° |
| Triangular Cut Height | ≥35 mm |
| Core Sampler Aperture Width | 4.0 ± 0.2 mm |
| Shear Speed | 1.0 mm/s |
| No-Load Shear Force | ≤0.147 N |
| Calibration Traceability | Certified Standard Weights (±0.1% deviation) |
| Brand | Bosin |
|---|---|
| Model | NS01 |
| Origin | Shanghai, China |
| Force Sensor Capacity | 20 kg (optional: 1/5/10/30/50 kg) |
| Force Accuracy | < ±0.5% FS |
| Load Cell Calibration | Traceable to international standard weights |
| Integrated Weighing Function | 0.1 g resolution |
| Displacement Resolution | 0.01 mm |
| Maximum Travel Distance | 320 mm |
| Test Speed Range | 0.01–20 mm/s (adjustable in 0.01 mm/s increments) |
| Data Acquisition Rate | 20 / 50 / 100 / 200 Hz (user-selectable) |
| Touchscreen Interface | Integrated high-definition capacitive display |
| Safety Features | Emergency stop, mechanical upper/lower limit switches, overload protection |
| Compliance | Designed for GLP-compliant food texture testing per ISO 11036 and ASTM STP 1594 guidelines |
| Brand | Bosin |
|---|---|
| Origin | Shanghai, China |
| Model | TA/VB |
| Unit Price | USD 675 (FOB Shanghai) |
| Probe Type | Dual-Acting Compression-Shear Jaw Fixture |
| Compliance | Designed for ASTM F3102-17 (Standard Test Method for Measuring Textural Properties of Food Using a Texture Analyzer), ISO 11357-4 (Plastics – Differential Scanning Calorimetry), and USP <721> Compendial Requirements for Mechanical Testing of Solid Dosage Forms |
| Brand | Biotai |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | BOT-HMD |
| Price Range | USD 21,000 – 28,000 (FOB) |
| Power Supply | 220 V AC, 50/60 Hz |