Industry-specific Instruments
Filter
Showing 571–600 of 6044 results
| Origin | Switzerland |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | D1401 |
| Pricing | Upon Request |
| Brand | Brookfield |
|---|---|
| Model | FDH-3201 |
| Temperature Control | ±0.1 °C at 150 °C |
| Temperature Range | 150 °C (fixed setpoint) |
| Heating Method | Oil bath with stainless steel heater |
| Bath Vessel | Borosilicate glass cylinder, Φ300 × 450 mm |
| Air Flow Control | Precision mass flow meter |
| Sample Stations | Dual-tube configuration |
| Power Supply | AC 220 V / 50 Hz |
| Total Power | 2.5 kW |
| Temperature Sensor | Pt100 RTD |
| Controller | Microprocessor-based PID with digital display |
| Air Filtration | Glass wool–packed filter |
| Insulation | High-efficiency thermal insulation |
| Compliance | ASTM D6082, ISO 6247, IP 146 |
| Brand | Brookfield (csfriend OEM) |
|---|---|
| Origin | Hunan, China |
| Model | FDH-3901 |
| Temperature Control Range | Ambient to 100 °C |
| Temperature Accuracy | ±1 °C |
| Spray Flow Rate | 5.0 ±0.5 mL/s |
| Bearing Speed | 600 ±30 rpm |
| Bearing Type | ISO 204 Deep Groove Ball Bearing |
| Input Power | <1000 W |
| Brand | Brookfield (csfriend OEM) |
|---|---|
| Model | FDH-4301 |
| Temperature Range | Ambient to –35 °C ±0.5 °C |
| Temperature Control | PID digital microprocessor controller |
| Bath Material | Stainless steel |
| Cooling System | Hermetically sealed compressor-based refrigeration |
| Circulation | Magnetic-drive recirculating pump |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Design | Modular split-body configuration |
| Capillary Viscometer Type | Ubbelohde or Cannon-Fenske compliant (standardized for grease similarity testing per ASTM D1092) |
| Brand | Brookfield (csfriend OEM) |
|---|---|
| Origin | Hunan, China |
| Model | FDH-8401 |
| Compliance | ASTM D5481, SH/T 0703 |
| Temperature Range | Ambient to 260 °C ±0.1 °C |
| Shear Rate Range | Up to 1×10⁶ s⁻¹ (calculated) |
| Capillary Diameter | 0.15 mm |
| Pressure Rating | 20 MPa |
| Sample Volume | 7 mL ±1 mL |
| Display | Industrial Touchscreen (Bilingual UI) |
| Power Supply | AC 220 V, 50 Hz |
| Safety Standards | EN 61010-1, Integrated FTC Circuit Protection, Pneumatic Pressure-Limiting Valve, Dynamic Honeycomb Data Acquisition Architecture |
| Brand | Bruker |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | JuiceScreener |
| Instrument Type | NMR-Based Beverage Authenticity Analyzer |
| Application | Laboratory |
| Measurement Time | ≤4 min |
| Compliance | ASTM D8271-21, ISO 21569:2022 (NMR-based food authenticity), GLP-compliant workflow via SampleTrack™ |
| Software Platform | TopSpin 4.2 + JuiceScreener Module v3.1 |
| Database | >16,000 reference NMR spectra from authentic fruit juices across 50+ global production regions |
| Quantified Analytes | ≥30 compounds (glucose, fructose, sucrose, citric acid, malic acid, isocitric acid, quinic acid, ethanol, fumaric acid, lactic acid, HMF, galacturonic acid, chloride, etc.) |
| Brand | PW |
|---|---|
| Origin | Guangdong, China |
| Model | PW-6607 |
| Compliance | ISO 5627, GB/T 456 |
| Test Area | 10 ± 0.05 cm² |
| Pressure | 100 ± 2 kPa |
| Vacuum Range | 50.66–29.33 kPa (3档) |
| Timing Range | 1–9999 s (Auto mode ≤200 s) |
| Timing Accuracy | ≤1 s @ 1000 s |
| Display | 7-inch color touchscreen (Chinese/English UI) |
| Power | AC 220 V ±10%, 50 Hz (110 V/60 Hz optional) |
| Dimensions | 370 × 330 × 390 mm |
| Weight | ~29 kg |
| Interface | RS232 |
| Printer | Built-in thermal printer |
| Data Storage | Onboard flash memory with statistical calculation and dual-side differential analysis |
| Brand | Shenkai |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | PRC |
| Model | SYP4100-I |
| Price | Upon Request |
| Penetration Time Range | 0–9 min 59 s |
| Time Accuracy | ±0.1 s |
| Max Penetration Depth | ≤620 dmm (0.1 mm increments) |
| Standard Cone Mass | 102.5 g (conforms to GB/T 269, ISO 2137, ASTM D217, IP 50) |
| Standard Rod Mass | 47.5 g |
| Digital Depth Measurement System | Yes |
| Manual Release Mechanism | Integrated |
| Horizontal Leveling Adjustment | Precision Knob-Actuated Platform |
| Operating Environment | Ambient or Constant-Temperature Water Bath Compatible |
| Origin | France |
|---|---|
| Supplier Type | Authorized Distributor |
| Import Status | Imported |
| Model | D2210 |
| Power Supply | 400 V, 3-phase |
| Frequency | 50/60 Hz |
| Main Motor | 750 W |
| Coolant Pump Motor | 150 W |
| Rotational Speed | 1800 / 2500 / 3500 rpm (3-step adjustable) |
| Core Diameter Range | Φ4″–Φ6″ (101.6–152.4 mm) |
| Core Length Capacity | 0.5″–3″ (12.7–76.2 mm) |
| Sample Stage Adjustment | X-Y translation + ±45° tilt |
| Maximum Core Height | 120 mm |
| Noise Level | <70 dB(A) |
| Net Weight | 150 kg |
| Dimensions (L×W×H) | 1000 × 800 × 2000 mm |
| Brand | Brugger |
|---|---|
| Origin | Japan |
| Manufacturer | KRK Co., Ltd. (Japan) |
| Model | KRK-2571-III |
| Press Plate Dimensions | 270 mm × 270 mm |
| Stroke | 195 mm |
| Pressing Pressure | 410 kPa |
| First-Stage Press Time | 5 min |
| Second-Stage Press Time | 2 min |
| Power Supply | 100/110 VAC, 50/60 Hz, 1 A |
| Compressed Air Requirement | 0.5 MPa |
| External Dimensions | 800 × 700 × 1700 mm |
| Weight | 400 kg |
| Construction Material | AISI 304 stainless steel |
| Compliance | CPPA C4/C5, TAPPI T205 |
| Operation | Pneumatic, dual-stage, fully automated |
| Brand | Bruker |
|---|---|
| Origin | Germany |
| Model | Honey Profiling Module |
| Application Domain | NMR-based food authenticity and quality screening for honey |
| Core Technology | 400 MHz benchtop nuclear magnetic resonance (NMR) spectroscopy |
| Analysis Approach | Combined targeted quantification and untargeted statistical fingerprinting |
| Compliance Framework | Designed to support GLP/GMP workflows, ISO/IEC 17025 method validation, and FDA 21 CFR Part 11–compliant data integrity requirements |
| Brand | Bruker |
|---|---|
| Origin | Germany |
| Model | Wine Profiling Module |
| Instrument Type | NMR-based Alcoholic Beverage Authenticity & Quality Analyzer |
| Application Domain | Wine Authentication, Origin Verification, Vintage Determination, Adulteration Screening (e.g., water dilution), Metabolite Quantification |
| Regulatory Alignment | Designed for GLP-compliant workflows |
| Brand | Bruker |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | Globulyser |
| Detection Target | Milk Fat Globule Size Distribution |
| Automation Level | Fully Automatic |
| Analysis Time | 1–5 minutes per sample |
| Size Range | 0.20–3.0 µm (mean diameter) |
| Accuracy | ±2–4% of reading |
| Brand | Bruker |
|---|---|
| Origin | Germany |
| Model | Minispec Fiber Oil Content Analyzer |
| Measurement Principle | Time-Domain Nuclear Magnetic Resonance (TD-NMR) |
| Analysis Time | < 60 s per sample |
| Sample Throughput | Up to 100 samples (with optional autosampler) |
| Compliance | FDA 21 CFR Part 11, GLP/GMP-ready |
| Software | Minispec FiberOil v5.x |
| Detection Target | Oil Pick-up (OPU), Fiber Oil Finish (FOF), Yarn Oil Finish (FOY) |
| Sample Form | Loose fibers, filaments, staple fibers, yarns, nonwovens |
| Calibration Options | Weighted and non-weighted methods |
| Sensitivity | Optimized for low-oil-content fibers (down to ~0.05 wt%) |
| Brand | Bruker |
|---|---|
| Origin | France |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | minispec Food & Beverage Droplet Size Analyzer |
| Automation Level | Semi-Automatic |
| Detection Scope | Milk Composition & Emulsion Droplet Size Distribution |
| Measurement Principle | Time-Domain Nuclear Magnetic Resonance (TD-NMR) |
| Validated For | Single Emulsions (O/W and W/O) and Double Emulsions (W/O/W) |
| Droplet Size Range | 0.5–10 µm (O/W), 1–30 µm (W/O) |
| Minimum Detectable Dispersed Phase | 2% (v/v) |
| Sample Prep | Minimal — No Dilution or Modification Required |
| Regulatory Alignment | Compliant with GLP practices |
| Brand | Bruker |
|---|---|
| Origin | France |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | minispec mq one |
| Pricing | Available Upon Request |
| Brand | Bruker |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor (China Region) |
| Product Category | Imported Instrument |
| Model | minispec mq-Series Polymer Analyzer |
| Pricing | Upon Request |
| Temperature Control Options | Fixed (35–45 °C), Variable (–5 to 65 °C via water bath/heater), Extended Range (–100 to 200 °C via gas-flow system) |
| Pulse Configurations | T₁, T₂, diffusion-weighted (PGSE), gradient-enabled |
| Sample Forms | Liquids, powders, films, tablets, bulk solids |
| Analysis Principle | Time-domain nuclear magnetic resonance (TD-NMR) |
| Brand | Bruker |
|---|---|
| Origin | France |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | Minispec mqone Spin Finish Analyzer |
| Pricing | Available Upon Request |
| Brand | Bruker |
|---|---|
| Origin | Germany |
| Model | minispec (mq-series platform) |
| Measurement Principle | Time-Domain Nuclear Magnetic Resonance (TD-NMR) |
| Sample Tube Options | 10 mm (mq40), 40 mm (mq-one), 50 mm (mq7.5) |
| Compliance | ASTM D8139, ISO 10565, AOAC 994.01, USP <1210> |
| Data Integrity | Audit trail-enabled software compliant with FDA 21 CFR Part 11 requirements for regulated QC/QA environments |
| Calibration | Minimal reference sample calibration |
| Brand | Bruker |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Minispec TD-NMR (LF50/LF90) |
| NMR Frequency | 7.5 MHz (LF50) / 6.2 MHz (LF90) |
| Magnet Type | Permanent Magnet (0.17 T / 0.14 T) |
| Sample Capacity | Up to 60 g (LF50) / Up to 850 g (LF90) |
| Power Supply | 110–220 V AC |
| Power Consumption | 330 W (LF50) / 4500 W (LF90) |
| Operating Temperature | Controlled Magnet Environment |
| Form Factor | Benchtop (LF50) or Mobile Cart-Based (LF90) |
| Dimensions (L×W×H) | 65×75×30 cm (LF50, benchtop) / 95×55×115 cm (LF90, mobile) |
| Weight | 150 kg (LF50) / 350 kg (LF90) |
| PC Requirements | Pentium IV or higher, Windows XP Professional |
| Compliance | ISO 9001 certified |
| Brand | Bruker |
|---|---|
| Origin | Germany |
| Model | MPA II-D |
| Application | Milk and dairy product composition analysis |
| Automation | Fully automated |
| Sample Types | Liquid (raw milk, UHT milk, whey), semi-solid (yogurt, cream cheese), solid (milk powder, infant formula) |
| Optical Configuration | Transmission (for liquids via 1-mm flow cell), Diffuse reflectance (for solids/semi-solids via integrating sphere) |
| Temperature Control | Heated flow cell (40 °C), programmable sample preheating (20–40 °C) |
| Fluid Handling | Dual-pump LSM module (high-pressure homogenizing pump + peristaltic pump) |
| Compliance | Designed for GLP/GMP environments |
| Brand | BUCHI |
|---|---|
| Origin | Switzerland |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported |
| Model | K-365 Dist Line |
| Instrument Type | Automated Steam Distillation System for Alcohol, pH, and Volatile Analyte Recovery |
| Application | Laboratory-Based Food & Beverage Quality Control |
| Distillation Time | 3.5 min/sample |
| Alcohol Content Range | 0–100 % v/v |
| pH Measurement Range | 0–14 |
| Dimensions (L×W×H) | 320 × 400 × 730 mm |
| Weight | 23 kg |
| Power Supply | 220–240 VAC ±10%, 50/60 Hz |
| Power Consumption | 2100 W |
| Recovery Rate | ≥99.5 % |
| Repeatability | RSD <0.8 % |
| Nitrogen Detection Range | 0.02–220 mg N |
| Compliance | CE, CSA |
| Cooling Water Management | Smart Flow-Controlled Condenser with Auto-Shutoff |
| Steam Power Control | 10–100 % adjustable, programmable steam ramping |
| Safety Features | Dual-interlocked transparent safety shield, real-time cooling water flow sensor, steam generator pressure monitoring, sample tube position verification, reagent/waste/water level sensing |
| Voltage Regulation | Integrated voltage stabilizer for consistent steam output under fluctuating mains conditions |
| Brand | BUCK |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | TGA2000A |
| Pricing | Available Upon Request |
| Sample Capacity | 20-position (standard), optional 40-position carousel |
| Temperature Range | 50–1000 °C |
| Temperature Accuracy | ±1 °C |
| Sample Mass Range | 0.1–10 g |
| Weight Loss Resolution | ±0.0002 g |
| Max. Weight Loss | 0–100% |
| Measurement Parameters | Moisture, Volatile Matter, Ash, Fixed Carbon, Loss on Ignition (LOI) |
| Automation Level | Fully Automated Dual-Rotary Carousel with Patented Crucible Lid Handling |
| Safety Certification | CE-compliant high-temperature chamber (operational up to 600 °C without lid opening risk) |
| Compliance | ASTM D3172, D3173, D3174, D3175 |
| Brand | Bühler (Switzerland) |
|---|---|
| Origin | Switzerland |
| Model | Frisse-ELK-0005V |
| Configuration | Imported Equipment |
| Supplier Type | Authorized Distributor for China Region |
| Control System Options | Siemens S7 CPU or Allen-Bradley ControlLogix CPU |
| Drive Type | Variable-Frequency Motor (ELK-V) or Bidirectional Fixed-Speed Motor (ELK-P) |
| Discharge Capacity | Up to 20 t/h |
| Temperature Control | PID-regulated closed-loop water circulation with proportional valves and high-surface-area heat exchangers |
| Ventilation | Dual adjustable exhaust hoods (optional), standard louvered outlet with continuous airflow control |
| Compliance | Designed for GMP-compliant chocolate manufacturing environments |
| Brand | Bühler (Switzerland) |
|---|---|
| Origin | Switzerland |
| Model | MultiTherm TC |
| Measurement Principle | Controlled-cooling thermal profiling with integrated crystallinity indexing (BCI) |
| Output | BCI Score (1–6+) |
| Cycle Time | ~60 minutes per sample |
| Data Storage | Onboard non-volatile memory with USB export |
| Compliance | Designed for GLP-compliant chocolate manufacturing environments |
| Software Interface | Windows-based Bühler MultiControl Suite (v3.2+) |
| Brand | Bühler (Switzerland) |
|---|---|
| Origin | Switzerland |
| Model | SDY-200 |
| Drive Type | Hydraulic |
| Roller Cooling | Independent, Temperature-Controlled Water Circulation |
| Safety Features | Interlocked Safety Guard, Automatic Shutdown (Overload/Feed Jam/Cooling Failure) |
| Roller Adjustment | Mechanical Gap Setting |
| Roller Speed Ratio | Adjustable Differential Speed |
| Compliance | Designed per ISO 12100 for Machinery Safety, GLP-Compatible Operation |
| Brand | SDL Atlas |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | China |
| Model | M230 |
| Dimensions (L×W×H) | 780 × 760 × 2100 mm |
| Weight | 177 kg |
| Standards Compliance | BS EN 29865, DIN 53888, GB/T 14577, ISO 9865, NG G07-058 |
| Test Configuration | 4 test cups inclined at 15° |
| Dropper Array | 300 precision nozzles |
| Dropping Height | 1500 mm |
| Water Supply Options | Tap water or recirculated reservoir water |
| Integrated Features | Recirculating water system, automatic sample wiper, flow meter, water filter, intuitive control panel |
| Brand | Bunkoukeiki |
|---|---|
| Origin | Japan |
| Model | NIJI-2 |
| Light Source | 150 W Xenon Arc Lamp |
| Spectral Range | 300–1150 nm |
| Bandwidth Options | 5, 10, or 20 nm (FWHM) |
| Irradiance | ≥1 mW/cm² (≥40 μmol·m⁻²·s⁻¹) |
| Illuminated Area Diameter | ≥Φ3 mm |
| Optical Delivery | SMA-coupled Φ3 mm Fiber, 1 m Length |
| Calibration Sensor | Integrated Silicon Photodiode Detector |
| Control Interface | Embedded LED Indicator + Manual Shutter |
| Dimensions (W×D×H) | 230 × 295 × 414 mm (excluding protrusions |
| Compliance | Designed for ICH Q1B, ISO 10993-12, and USP <1107> photostability protocols |
| Brand | Bunkoukeiki |
|---|---|
| Origin | Japan |
| Model | WAD China |
| Light Source | 150 W Xenon Lamp |
| Spectral Range | 300–1150 nm |
| Bandwidth Options | 5 / 10 / 20 nm (FWHM) |
| Irradiance | >1 mW/cm² (≥40 μmol·m⁻²·s⁻¹) |
| Illuminated Area | Ø ≥3 mm |
| Fiber Optic Coupling | Ø3 mm, 1 m length |
| Dimensions (W×D×H) | 230 × 295 × 414 mm (excluding protrusions) |
| Shutter | Manual |
| Calibration Option | Silicon Photodiode Sensor |
| Origin | Hunan, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | BZS-II |
| Pricing | Upon Request |
| Input Voltage | AC 380 V / 50 Hz (3-phase + N) |
| Pump Pressure Range | 0.03–1.0 MPa |
| Power Consumption | 6 kW |
| Flow Rate Range | 0.05–6 m³/h |
| Test Stations | 3 (Water Hammer |
| Ambient Operating Temperature | Room Temperature (15–30 °C) |