- All
- Favorite
- Popular
- Most rated
| Brand | SPG |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | SPG Series |
| Pricing | Upon Request |
| Brand | SPG |
|---|---|
| Origin | Japan |
| Model | MN-125 |
| Maximum Operating Pressure | 0.3 MPa |
| Membrane Tube Diameter | φ10 mm |
| Total Length | 125 mm |
| Effective Membrane Length | 95 mm |
| Membrane Pore Size | 1 µm (customizable) |
| Membrane Material | SUS304 or SUS316 Stainless Steel |
| Sealing Material | FKM O-rings |
| Gas Inlet Connection | 6 mm OD tubing |
| Dimensions (W × D × H₁ × H₂) | 185 mm × 50 mm × 38 mm × (20–500 mm, adjustable stainless steel shaft length) |
| Optional accessories | secondary pressure regulators, stainless steel tubing, isolation valves, calibrated pressure transducers |
| Brand | SPG |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | MN-20S |
| Pricing | Available Upon Request |
| Operating Pressure | Up to 0.3 MPa |
| Membrane Tube Dimensions | Ø10 mm × 20 mm (Effective Length: 10 mm) |
| Pore Size | 1 µm (Standard) |
| Optional Materials | SUS304, SUS316 Stainless Steel |
| Sealing Material | FKM O-Ring |
| Gas Inlet Connection | 6 mm OD Tubing |
| Device Footprint | W 62 mm × H₁ 34 mm |
| Adjustable Shaft Length (H₂) | 20–500 mm |
| Sample Volume Range | 100 mL – 2 L |
| Accessories Not Included | Main pressure gauge, gas cylinder, primary pressure regulator, shut-off valve, vent valve, secondary pressure regulator, tubing, or pressure gauges |
| Optional Accessories | Regulated gas supply kits, calibrated pressure manifolds, stainless-steel fluidic manifolds, and ISO-compliant mounting fixtures |
| Brand | SPG |
|---|---|
| Origin | Japan |
| Model | SB-125 |
| Maximum Operating Pressure | 0.3 MPa |
| Membrane Tube Diameter | Φ10 mm |
| Total Length | 125 mm |
| Effective Length (L) | 105 mm |
| Membrane Pore Size | 0.3 µm (standard) |
| optional materials | SUS304, SUS303, FKM, PP, PE, FPM, ceramic, silicone rubber, polyurethane |
| Gas Inlet Connection | 6 mm OD push-to-connect fitting (SMC-compatible) |
| Included Modules | SPG membrane module MD10L125 with hydrophobic valve, digital pressure regulator with precision control valve, liquid recirculation pump (with silicone tubing and current-limiting resistor), pneumatic syringe/valve assembly, mounting bracket set (bracket, clamp, sleeve) |
| Note 1 | Achievable bubble size distribution depends on liquid surface tension and gas solubility. Note 2: Main gas supply (cylinder + primary pressure regulator) and high-pressure piping are not included. Note 3: SPG membrane module MD10L125 is available as standalone component. Note 4: Custom configurations supported — e.g., extended membrane length (L250 or L500), alternative wetted materials, or specialized fluidic interfaces. |
| Brand | SPG |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | MN-500 |
| Pricing | Available Upon Request |
| Maximum Operating Pressure | 0.3 MPa |
| Membrane Tube OD | 10 mm |
| Effective Membrane Length (MN-500) | 470 mm |
| Total Length (MN-500) | 500 mm |
| Membrane Pore Size | 1 µm (standard), customizable |
| Membrane Material | SUS304 or SUS316 stainless steel |
| Sealing Material | FKM (Viton®) O-rings |
| Gas Inlet Connection | 6 mm OD tubing |
| Dimensions (MN-500) | W 560 mm × D 50 mm × H₁ 38 mm (×2) + H₂ adjustable 20–500 mm (stainless steel shaft length) |
| Excludes | Main pressure gauge, gas cylinder, primary pressure regulator, isolation valves, exhaust valves, pressure gauges, and piping |
| Brand | SPG |
|---|---|
| Origin | Japan |
| Model | MN-250 |
| Maximum Operating Pressure | 0.3 MPa |
| Membrane Tube Diameter | φ10 mm |
| Effective Membrane Length | 220 mm |
| Total Length | 250 mm |
| Membrane Pore Size | 1 µm (standard), optional materials: SUS304 / SUS316 stainless steel |
| Sealing Material | FKM O-rings |
| Gas Inlet Connection | 6 mm OD tubing |
| Dimensions (W × D × H) | 310 mm × 50 mm × (38 mm + H₂), where H₂ (stainless steel shaft length) adjustable from 20–500 mm |
| Optional accessories | secondary pressure regulator, isolation valves, pressure gauges, and custom tubing kits |
Show next