- All
- Favorite
- Popular
- Most rated
| Brand | Hot Disk |
|---|---|
| Origin | Sweden |
| Model | TPS3500 |
| Measurement Principle | Transient Plane Source (TPS) Method |
| Thermal Conductivity Range | 0.005–2000 W/(m·K) |
| Thermal Diffusivity Range | 0.01–1200 mm²/s |
| Volumetric Heat Capacity Range | up to 5 MJ/(m³·K) |
| Temperature Range | 30 K to 1000 °C |
| Minimum Test Duration | 0.1 s |
| Accuracy | < 3% |
| Repeatability | < 1% |
| Sample Forms | Solids, Liquids, Powders, Pastes, Thin Films, Coatings, Anisotropic & Composite Materials |
| Test Atmosphere | Air, Vacuum, or Inert Gas |
| Sample Dimensions (Min) | 2 mm diameter × 0.5 mm thickness (bulk), 8 mm diameter × 0.1 mm thickness (thin films) |
| Dimensions (L×W×H) | 600 × 460 × 330 mm |
| Compliance | ISO 22007-2:2008 |
| Brand | Flucon / flucon fluid control GmbH |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | LAMBDA |
| Instrument Type | Hot Wire Method |
| Continuous Sample Capacity | Multiple samples |
| Test Environment | High-Temperature Operation |
| Thermal Conductivity Range | 10–2000 W/(m·K) |
| Accuracy | ±0.1% of reading |
| Dimensions (L×W×H) | 370 × 235 × 150 mm |
| Repeatability | 98–99% |
| Operating Temperature Range | −50 to +300 °C |
| Sample Forms | Liquids, colloids, powders |
| Compliance | ASTM D7896-19 |
| Brand | Thermtest |
|---|---|
| Origin | Canada |
| Model | TLS-100 |
| Measurement Principle | Transient Line Source Method |
| Thermal Conductivity Range | 0.1–5 W/m·K |
| Thermal Resistance Range | 0.2–10 m·K/W |
| Accuracy | ±5% |
| Repeatability | ±2% |
| Measurement Duration | 120 s |
| Operating Temperature Range | −40 to 100 °C |
| Minimum Sample Dimensions | Ø50 mm × 100 mm (L) |
| Probe Diameter | 1.6 mm |
| Data Storage | Internal memory + SD card (FAT32 formatted, up to 32 GB) |
| Compliance | ASTM D5334-22 |
| Power Supply | Rechargeable Li-ion battery (≥8 h continuous operation) |
| Weight | 1.2 kg |
| Dimensions (L×W×H) | 50 mm × 100 mm × 220 mm |
| Origin | France |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | ThermoConcept |
| Pricing | Upon Request |
| Brand | Hot Disk |
|---|---|
| Origin | Sweden |
| Model | 2500S |
| Measurement Principle | Transient Plane Source (TPS) Method |
| Thermal Conductivity Range | 0.005–2000 W/m·K |
| Temperature Range | 30 K to 1000 °C |
| Accuracy | ±3% |
| Repeatability | <1% |
| Sample Forms | Solids, Liquids, Powders, Pastes, Thin Films, Coatings, Anisotropic & Composite Materials |
| Test Atmosphere | Air, Vacuum, or Inert Gas |
| Dimensions (L×W×H) | 500 × 450 × 320 mm |
| Probe Diameter Options | 2–29.4 mm |
| Additional Outputs | Thermal Diffusivity (±5%), Volumetric Heat Capacity (±7%) |
| Brand | Hot Disk |
|---|---|
| Origin | Sweden |
| Model | TPS 1500 |
| Measurement Principle | Transient Plane Source (TPS) Method |
| Thermal Conductivity Range | 0.005–20 W/m·K |
| Temperature Range | −50 to 750 °C |
| Accuracy | < ±3% |
| Repeatability | < ±1% |
| Sample Forms | Solids, Powders, Pastes, Anisotropic & Composite Materials |
| Test Atmosphere | Air, Vacuum, or Inert Gas |
| Dimensions (L×W×H) | 50 × 40 × 30 cm |
| Probe Sizes | 2–29.4 mm |
| Compliance | ISO 22007-2 |
| Brand | Hot Disk |
|---|---|
| Origin | Sweden |
| Model | TPS 2500S |
| Measurement Principle | Transient Plane Source (TPS) Method |
| Thermal Conductivity Range | 0.005–2000 W/m·K |
| Temperature Range | 30 K to 1000 °C |
| Accuracy | < 3% |
| Repeatability | < 1% |
| Sample Forms | Solids, Liquids, Powders, Pastes, Thin Films, Coatings, Anisotropic & Composite Materials |
| Test Atmosphere | Air, Vacuum, or Inert Gas |
| Dimensions (L×W×H) | 500 × 450 × 320 mm |
| Compatible Modules | Basic, Thin-Film, Plate, Anisotropy, Single-Sided, Specific Heat |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | LaserPIT |
| Instrument Type | Laser Flash Method (AC-mode variant) |
| Temperature Range | Ambient to 200 °C |
| Sample Dimensions (Bulk) | 2.5–5 mm width × 30 mm length × 3–500 µm thickness |
| Sample Dimensions (Thin Films on Substrates) | 2.5–5 mm width × 30 mm length × 100–1000 nm thickness |
| Measurement Atmosphere | Vacuum (< 0.02 Pa) |
| Film Analysis Capability | Differential AC-mode thermal diffusivity extraction for anisotropic and substrate-supported thin films |
| Brand | ADVANCE RIKO |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Super LIX-R |
| Price | Upon Request |
| Temperature Range (°C) | 0–50 |
| Heating/Cooling Rate (°C/min) | 0.01–1.5 |
| Temperature Accuracy (°C) | ±0.1 |
| Sample Diameter (mm) | Φ5 ±0.5 |
| Sample Length (mm) | 12–20 |
| Measurement Range (µm) | 20 |
| Resolution (nm) | <0.2 |
| CTE Detection Limit | 5 × 10⁻⁹ K⁻¹ |
| Thermal Stability | <±0.001 °C/min at 0.1 °C/min ramp |
| Atmosphere | Low-pressure He (100 Pa) |
| Sensor | PT-100 Platinum RTD (JIS C 1604-1997 Class A) |
| Laser | He-Ne, 632.8 nm, 5 mW (IEC 60825-1 Class 3B) |
| Brand | ADVANCE RIKO |
|---|---|
| Origin | Japan |
| Model Series | PS, PSS |
| Heating Zone Width (PS) | 40 mm |
| Heating Zone Width (PSS) | 20 mm |
| Compatible Substrate Diameter | 50–300 mm |
| Application Scope | Rapid thermal processing (RTP), wafer annealing, solar cell sintering, FPD substrate heating, thin-metal foil annealing |
| Configuration | Modular assembly for extended heating zones |
| Compliance | Designed for integration into Class 100–1000 cleanroom-compatible production lines |
| Brand | ADVANCE RIKO |
|---|---|
| Origin | Japan |
| Model | HT-RTA59HD |
| Heating Method | High-Power Focused Halogen Lamp |
| Max Temperature | 1800 °C (achieved in ≤10 s for □15 mm samples) |
| Sample Chamber Atmosphere | Dual-gas inlet (N₂ and Ar), quartz tube encapsulation |
| Cooling | Forced-air cooling for lamp assembly |
| Form Factor | Benchtop, manual slide-rail sample loading |
| Compliance | Designed for ISO/IEC 17025-aligned lab environments |
| Brand | ADVANCE RIKO |
|---|---|
| Origin | Japan |
| Model | RHL-E Series |
| Heating Principle | Radiative heating via high-intensity near-infrared lamp array with water-cooled gold-coated elliptical reflector |
| Max Operating Temperature (E-type) | Up to 1200°C |
| Lamp Spectral Peak | ~1.15 µm |
| Reflector Material | Precision-polished aluminum substrate with vacuum-deposited Au coating |
| Cooling | Integrated water-circulation jacket for reflector and chamber housing |
| Sample Geometry Compatibility | Cylindrical/rod-shaped specimens |
| Reflective Geometry | Elliptical (E-series) |
| Compliance | Designed for ISO/IEC 17025-compliant lab environments |
| Brand | ADVANCE RIKO |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Advance Riko |
| Pricing | Available Upon Request |
Show next