Oxygen Analyzer
Filter
Showing 61–90 of 187 results
| Brand | BCC |
|---|---|
| Origin | Hebei, China |
| Model | MGA-6000 |
| Sensor Type | Tunable Diode Laser (TDLAS) |
| Measurement Range | 80/98–99.99% O₂ (user-selectable sub-ranges) |
| Accuracy | ±0.1% FS |
| Repeatability | ±0.01% FS |
| Stability | ±0.02% FS |
| Response Time | T₉₀ ≤ 15 s |
| Resolution | 0.01% O₂ |
| Sample Flow Rate | 400 ± 50 mL/min |
| Operating Temperature | −15 °C to +45 °C |
| Relative Humidity | ≤90% RH (non-condensing) |
| Output Interfaces | 4–20 mA analog, RS232 / RS485 serial, USB, Ethernet (TCP/IP) |
| Brand | Cambridge Sensotec |
|---|---|
| Origin | United Kingdom |
| Model | 1100 |
| Measurement Range | 1 ppm to 100% O₂ |
| Response Time (T₉₀) | < 5 s (at 1 L/min flow) |
| Accuracy | ±2% of actual O₂ concentration |
| Precision | ±0.5% of reading |
| Operating Temperature | 5–35 °C |
| Power Supply | 110/220 V AC, 50/60 Hz |
| Dimensions | 205 × 160 × 150 mm |
| Weight | 4 kg |
| Display | 16 × 2-character backlit LCD (9 mm height) |
| Warm-up Time | 3–4 min at 20 °C |
| Pump Type | AC-driven linear piston pump |
| Max Free Air Displacement | 4 L/min (0.28 bar typical) |
| Noise Level | ≤40 dB(A) at 1 m |
| Max Inlet Gas Temperature | 55 °C |
| Sensor Lifetime | >35,000 h |
| Analog Outputs | 0–5 V DC and 4–20 mA (user-programmable) |
| Digital Interface | RS232, data stream at 10 Hz |
| Calibration | Two-point, user-selectable gases (e.g., ambient air + zero or span gas) |
| Internal Pressure Compensation | Yes |
| Built-in Diaphragm Pump | Yes |
| Auto-Cleaning Function | Yes |
| Brand | CUBIC INSTRUMENTS |
|---|---|
| Origin | Hubei, China |
| Sensor Type | Electrochemical (ECD) |
| Measurement Ranges | 0–1% O₂ / 0–5% O₂ / 0–25% O₂ |
| Accuracy | ≤ ±2% FS |
| Repeatability | ≤ ±1% FS |
| Linearity Error | ≤ ±1% FS |
| Resolution | 0.1% (for 0–25% range) or 0.01% (for 0–1% range) |
| Response Time (T90) | < 30 s |
| Explosion Protection Rating | Ex db IIC T6 Gb |
| Operating Temperature | −20 to +60 °C |
| Operating Humidity | 0–98% RH (non-condensing) |
| Output Signal | RS485 (standard, Modbus RTU protocol) or RS232 (optional) |
| Power Supply | 24 VDC or 220 VAC |
| Brand | CUBIC INSTRUMENTS |
|---|---|
| Origin | Hubei, China |
| Model | Gasboard-9300 |
| Sensor Type | Tunable Diode Laser (TDLAS) |
| Measurement Ranges | 0–1%, 0–5%, 0–25% O₂ (selectable) |
| Accuracy | ≤ ±1% FS |
| Repeatability | ≤ ±1% FS |
| Linearity Error | ≤ ±1% FS |
| Resolution | 0.1% (for 0–25% range) or 0.01% (for 0–1% range) |
| Response Time (T90) | < 10 s |
| Explosion Protection Rating | Ex db IIC T6 Gb |
| Operating Temperature | −20 to +60 °C |
| Operating Humidity | 0–98% RH (non-condensing) |
| Output Signal | RS485 (standard), RS232 (optional) |
| Communication Protocol | Modbus RTU |
| Power Supply | 24 VDC or 220 VAC |
| Brand | CUBIC INSTRUMENTS |
|---|---|
| Origin | Hubei, China |
| Model | GasTDL-3100 |
| Sensor Type | Tunable Diode Laser (TDLAS) |
| Measurement Ranges | H₂S: 0–100 ppm / 0–5000 ppm |
| O₂ | 0–5 %vol (customizable up to 100 %vol) |
| CO | 0–100 %vol |
| CO₂ | 0–100 %vol |
| CH₄ | 0–20 %vol |
| Accuracy | ≤ ±1 % FS |
| Response Time (T90) | ≤ 1 s |
| Repeatability | ≤ ±1 % FS |
| Resolution | 0.01 %vol |
| Explosion Protection | Exd II CT6 Gb / Ex tb IIIC T80°C Db |
| Operating Temperature | −20 to +60 °C |
| Power Supply | 24 V DC, 24 W |
| Purge Gas | Industrial nitrogen, 0.3–0.8 MPa |
| Communication | RS485, RS232 |
| Analog Outputs | 2 × 4–20 mA |
| Digital Outputs | 3 × relay |
| Brand | CUBIC INSTRUMENTS |
|---|---|
| Origin | Hubei, China |
| Model | GasTDL-3100 |
| Sensor Type | Tunable Diode Laser (TDLAS) |
| Measurement Ranges | H₂S: 0–100 ppm / 0–5000 ppm |
| O₂ | 0–5 %vol (customizable up to 100 %vol) |
| CO | 0–100 %vol |
| CO₂ | 0–100 %vol |
| CH₄ | 0–20 %vol |
| Accuracy | ≤ ±1 % FS |
| Repeatability | ≤ ±1 % FS |
| Resolution | 0.01 %vol |
| Response Time (T90) | ≤ 1 s |
| Explosion Protection | Exd II CT6 Gb / Ex tb IIIC T80°C Db |
| Power Supply | 24 V DC, 24 W |
| Ambient Temperature | −20 to +60 °C |
| Purge Gas | Industrial nitrogen, 0.3–0.8 MPa |
| Communication | RS485, RS232 |
| Analog Outputs | 2 × 4–20 mA |
| Digital Outputs | 3 × relay |
| Installation | In-situ (transmission path) |
| Brand | CUBIC INSTRUMENTS |
|---|---|
| Origin | Hubei, China |
| Model | GasTDL-3100 |
| Sensor Type | Tunable Diode Laser (TDLAS) |
| Measurement Ranges | H₂S: 0–100 ppm / 0–5000 ppm |
| O₂ | 0–5 %vol (customizable up to 100 %vol) |
| CO | 0–100 %vol |
| CO₂ | 0–100 %vol |
| CH₄ | 0–20 %vol |
| Accuracy | ≤ ±1 %FS |
| Repeatability | ≤ ±1 %FS |
| Resolution | 0.01 %vol |
| Response Time (T90) | ≤ 1 s |
| Explosion Protection | Exd II CT6 Gb / Ex tb IIIC T80°C Db |
| Power Supply | 24 V DC, 24 W |
| Ambient Temperature | −20 to +60 °C |
| Purge Gas | Industrial N₂, 0.3–0.8 MPa |
| Output Signals | 2 × 4–20 mA, 3 × relay |
| Communication | RS485, RS232 |
| Brand | CUBIC INSTRUMENTS |
|---|---|
| Origin | Hubei, China |
| Model | GasTDL-3100-O2 |
| Sensor Type | Tunable Diode Laser (TDLAS) |
| Measurement Range | O₂: 0–5% vol (customizable up to 100% vol) |
| Accuracy | ≤±1% F.S. |
| Repeatability | ≤±1% F.S. |
| Resolution | 0.01% vol |
| Response Time (T90) | ≤4 s |
| Environmental Operating Temperature | −20 to +60 °C |
| Power Supply | 24 V DC, 24 W |
| Explosion Protection | Exd II CT6 |
| Output Signals | 2 × 4–20 mA, 3 × relay outputs |
| Communication Interface | RS485, RS232 |
| Purge Gas Requirement | Industrial nitrogen, 0.3–0.8 MPa |
| Origin | Imported |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model | DH-6000-FLD, Probe Length: 800 mm |
| Measurement Range | 0–25% O₂ (3-digit display) |
| Accuracy | ±2% of reading |
| Linearity | ±1% FS (analog output) |
| Repeatability | ±0.5% FS (analog output) |
| Stability | ±2% FS/24 h (zero & span) |
| Analog Outputs | 0–5%, 0–10%, or 0–25% O₂ range selectable |
| Warm-up Time | 25 min |
| Power Consumption | <80 W |
| Supply | 220 V ±10% AC, 50 Hz ±10% |
| Operating Temp. | Converter: –5 to +50 °C |
| Detector | –10 to +80 °C |
| Sample Gas Temp. | Low-temp version: 0–600 °C (models 112 & 112F) |
| High-temp version | 0–1400 °C (model 112G) |
| Sample Pressure Range | –500 to +500 mm H₂O |
| Response Time (t₉₀) | ≤5 s |
| Probe Length Options | 0.2, 0.4, 0.8, 1.0, or 12 m (custom lengths available) |
| Converter Dimensions | 212 × 274 × 120 mm (tolerance ±1 mm) |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | DH-800-FLD |
| Price Range | USD 7,000 – 14,000 |
| Measurement Range | 0–25% O₂ (3-digit display) |
| Accuracy | ±2% of reading |
| Linearity | ±1% of full scale (analog output) |
| Repeatability | ±0.5% of full scale (analog output) |
| Stability | ±2% of full scale over 24 h (zero & span) |
| Analog Output Options | 0–5%, 0–10%, or 0–25% O₂ range with selectable signals — 0–10 mA, 4–20 mA, 0–10 mV, or 1–5 V DC (load ≤750 Ω) |
| Warm-up Time | ≤25 min |
| Power Consumption | <80 W |
| Supply Voltage | 220 V ±10% AC, 50 Hz ±10% |
| Operating Ambient Temp. | Converter: −5 to +50 °C |
| Sensor | −10 to +80 °C |
| Sample Gas Temp. Range | Low-temp version: 0–600 °C (Models 112 & 112F) |
| High-temp version | 0–1400 °C (Model 112G) |
| Sample Pressure Range | −500 to +500 mm H₂O |
| Response Time (T₉₀) | ≤5 s |
| Probe Length Options | 0.2 m, 0.4 m, 0.8 m, 1.0 m, 1.2 m, or custom |
| Converter Dimensions | 212 × 274 × 120 mm (tolerance ±1 mm) |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic |
| Model | GCDH-X |
| Price | Upon Request |
| Measurement Principle | Electrochemical (Long-Life Galvanic Cell) |
| Range Options | 0–10 / 0–100 / 0–1000 ppm O₂, or 0–1% O₂ |
| Accuracy | ≤±4% FS (0–10 ppm), ≤±2% FS (0–100 ppm and 0–1000 ppm) |
| Resolution | 0.01 ppm |
| Response Time (T90) | ≤10 s |
| Sample Flow Rate | 300–500 mL/min |
| Zero Drift | ≤±1% FS/7 days |
| Span Drift | ≤±1% FS/7 days |
| Repeatability | ≤1% |
| Inlet Pressure Range | 0.05–0.5 MPa |
| Recovery Time | 60 min (from air to 1 ppm O₂) |
| Sensor Lifetime | >24 months |
| Explosion Protection | Ex ia IIC T5 |
| Weight | ~4.5 kg |
| Dimensions (L×W×H) | 255 × 250 × 160 mm |
| Power Supply | DC (rechargeable battery, ~8 h continuous operation) |
| Built-in Sample Pump | Optional |
| Temperature Compensation | Automatic |
| Sample Compatibility | H₂, He, hydrocarbons, inert gases, acid gases (e.g., CO₂), and mixed process streams |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | GPR-1100 |
| Pricing | Available Upon Request |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | GPR-2000 |
| Price Range | USD 1,400–4,200 |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | GPR-2500MO |
| Pricing | Upon Request |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | GPR-35MO |
| Pricing | Upon Request |
| Brand | HACH |
|---|---|
| Origin | Imported |
| Manufacturer Status | Original Equipment Manufacturer (OEM) |
| Model | EZ7200.99001102 |
| Measurement Principle | Acid-Base Titration |
| Measured Parameters | Volatile Fatty Acids (VFAs), Bicarbonate, Total Alkalinity, Partial Alkalinity |
| Channel Capacity | Up to 8 Streams |
| Compliance | Designed for Continuous Process Monitoring in Anaerobic Digestion Systems |
| Application Scope | Wastewater Treatment Plants, Sludge Digestion Facilities, Pilot-Scale Anaerobic Reactors |
| Brand | Junfang Lihua |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HXPQX-2020 |
| Price Range | USD 28,000–42,500 |
| Internal Volume | 0.60 m³ |
| Cross-Sectional Dimensions | 400 × 300 mm |
| Tunnel Length (Centerline) | 1850 mm |
| Temperature Range (High Temp Test) | 50–70 °C ±2 °C |
| Temperature Range (Low Temp Test) | 0–−40 °C ±2 °C |
| Humidity Range (Steady-State Damp Heat) | 93 %RH ±3 %RH at 40 °C ±2 °C |
| Air Velocity Range | 0–6.5 m/s ±0.2 m/s |
| Rotational Step | 45° per increment |
| Temp Measurement Accuracy | ±0.5 °C (Resolution ≤0.1 °C) |
| RH Measurement Accuracy | ±0.5 %RH (Resolution ≤0.1 %RH) |
| Air Velocity Measurement | 0.2–10 m/s, ±5 % error (Resolution ≤0.1 m/s) |
| Heating Rate | ≤1 °C/min |
| Cooling Rate | 0.5–1 °C/min |
| Humidification Rate | ≤5 %RH/min |
| Dehumidification Rate | ≤1 °C/min |
| Brand | Junfang Lihua |
|---|---|
| Origin | Beijing, China |
| Model | HXPQX-500 |
| Internal Volume | 500 L |
| Cross-sectional Dimensions | 460 mm × 400 mm |
| Centerline Length of Wind Tunnel | 945 mm |
| Airflow Velocity Range | 0–7 m/s ±0.2 m/s (adjustable via frequency converter) |
| Preset Airflow Setpoints | 0.8, 1.0, 2.0, 3.0, 4.0, 5.0, 6.0, 6.5 m/s |
| Control Interface | 7-inch TFT touch LCD panel |
| Rotation Capability | 360° continuous |
| Power Consumption | ≤2 kW |
| Supply Voltage | 3N 380 V, 50 Hz |
| External Dimensions | 2094 mm × 568 mm × 1034 mm |
| Exhaust System | Automated gas purging |
| Communication | RS485 / RS232, MODBUS-RTU protocol, multi-channel digital output interfaces |
| Brand | Leshi |
|---|---|
| Origin | Beijing, China |
| Model | SE301 |
| Sensor Type | Electrochemical (low-range) & Optional Paramagnetic |
| Measurement Ranges | 0–500 ppm, 0–1%, 0–5.0%, 0–10.0%, 0–25.0%, 0–50.0%, 0–100% O₂ |
| Accuracy | ±1% of reading (full-scale dependent) |
| Response Time (T90) | 8–10 s (electrochemical) |
| Repeatability | ±1% FS |
| Resolution | 0.1 ppm (0–500 ppm range), 0.1% (higher ranges) |
| Display | Backlit LCD with real-time digital readout |
| Sampling System | Integrated diaphragm pump, stainless-steel probe (12 ft PTFE-lined sampling hose), dual-stage particulate/moisture filter, flow meter, automatic condensate removal trap |
| Data Interface | USB port, optional data logger support |
| Power | Rechargeable Li-ion battery (≥8 h continuous operation), AC adapter included |
| Enclosure | IP65-rated ruggedized housing |
| Compliance | Designed to meet requirements of HJ 57–2017 (China), GB/T 16157–1996, and supports method principles aligned with ASTM D4084–22 (electrochemical O₂) and ISO 10156 (paramagnetic O₂ detection) |
| Brand | ONUEE |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Industrial Analyzer |
| Model | PMA1000 |
| Price | Upon Request |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Switzerland |
| Product Type | In-situ Tunable Diode Laser (TDL) Oxygen Analyzer |
| Measurement Principle | Absorption Spectroscopy at 760 nm |
| Detection Range | 0–25% O₂ (vol%) |
| Response Time (T90) | < 1 s |
| Accuracy | ±0.1% O₂ (full scale) |
| Operating Temperature | –20 to +65 °C (probe) |
| IP Rating | IP66/IP67 (probe), IP65 (transmitter) |
| Compliance | ATEX II 2G Ex db IIB T4 Gb, IECEx db IIB T4 Gb, SIL2 per IEC 61508 |
| Brand | MNK |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Models | Three Configurable Systems (CO/CO₂/H₂O/O₂ Integrated) |
| Price Range | USD 4,200 – 7,000 (FOB Beijing) |
| Brand | Neutronics |
|---|---|
| Origin | USA |
| Model | 5100 |
| Sensor Type | Electrochemical (Zirconia-based) |
| Measurement Range | 0–1%, 0–10%, 0–25%, 0–50%, or 0–100% O₂ (auto-ranging or fixed-range selectable) |
| Display | 0.75" (19.05 mm) high-brightness LED numeric display with status LEDs (green = normal operation, yellow = system fault, red = alarm 1 or 2) |
| Response Time (t₉₀) | <15 s |
| Accuracy | ±2% FS at constant temperature |
| Operating Temperature | 5–45 °C |
| Output Signals | 4–20 mA, 0–10 VDC (also supports 0–1 VDC and 0–5 VDC), RS-232 serial interface |
| Alarm Outputs | Two configurable relay outputs |
| Sample Connection | 1/8" NPT female port |
| Power Supply | 115/230 VAC, 50/60 Hz, 10 W or 12–30 VDC |
| Enclosure Rating | Front panel — IP66 (MEWA4) |
| Weight | <0.9 kg |
| Warranty | 12 months from shipment date under normal operating conditions |
| Compliance | Designed for industrial process environments |
| Brand | Neutronics |
|---|---|
| Origin | USA |
| Model | Model 3100 |
| Sensor Type | High-Stability Zirconia Electrolyte Sensor |
| Measurement Ranges | 0–10 ppm, 0–100 ppm, 0–1,000 ppm, or 0–100% O₂ (auto-ranging or fixed-range configuration) |
| Display | 0.75" (19.05 mm) LED numeric display with status LEDs (green = normal/online, yellow = fault), dual alarm indicators |
| Response Time | <10 seconds (T₉₀) |
| Accuracy | ±2% FS at constant temperature |
| Operating Temperature | 5–45 °C |
| Output Signals | RS-232 serial interface |
| Alarm Outputs | Two programmable SPDT relay outputs (configurable for high/low/alarm latching or trip functions) |
| Sample Inlet | 1/4" compression fitting |
| Electrical Connection | Plug-in terminal block |
| Power Supply | 5 W, 115/230 VAC 50/60 Hz or 12–30 VDC |
| Enclosure Rating | Front panel: NEMA 4 / IP66 |
| Housing | NEMA 1 / IP20 |
| Expected Sensor Lifetime | 5–10 years under typical industrial conditions |
| Compliance | Designed for continuous emission monitoring and process safety applications in accordance with general industrial instrumentation standards (IEC 61000-6-2/6-4, UL 61010-1, CE) |
| Brand | Neutronics |
|---|---|
| Origin | USA |
| Model | 7100P |
| Sensor Type | Miniature Heated Zirconia |
| Measurement Range | 0–1000 ppm O₂ (max 1% O₂) |
| Display | 0.75" (19.05 mm) High-Brightness LED, Resolution: 0.1 ppm |
| Response Time | <15 s (T90, at 500 mL/min flow) |
| Accuracy | ±3 ppm (0–50 ppm, two-point calibration) |
| Operating Temperature | 0–45 °C |
| Storage Temperature | −15–+50 °C |
| Humidity | 0–95% RH non-condensing |
| Sample Flow Rate | 0.4–1 L/min (constant pressure) |
| Power Supply | 90–250 VAC, 50/60 Hz, 10 W |
| Warm-up Time | ~2 minutes |
| Output Signals | RS-232, 4–20 mA, 0–10 VDC (optional: 0–1 VDC, 0–5 VDC) |
| Sample Port | 1/8" NPT female |
| Weight | <2.2 kg |
| Warranty | 1 year (electronics & sensor) |
| Alarm Indicators | Dual LED alarms (Alarm 1 & Alarm 2), Status LEDs (green = normal/online |
| Brand | Ocean Optics |
|---|---|
| Origin | Imported |
| Manufacturer | Ocean Optics, Inc. |
| Model | NeoFox |
| Measurement Principle | Fluorescence Quenching (Phase-Modulation) |
| Accuracy | ±0.1–0.5% O₂ (full scale) |
| Resolution | 0.005–0.20% O₂ |
| Probe Coating | Sol-Gel or Polymer-Based Oxygen-Sensitive Luminescent Layer |
| Interface | USB/RS-232 |
| Software | NeoFox Data Acquisition & Control Suite (v4.0+) |
| Compliance | CE, RoHS, ISO/IEC 17025-compatible operation environment |
| Operating Temperature | 0–50 °C |
| Pressure Range | Ambient to 3 bar (absolute), optional high-pressure variants available |
| Brand | Ocean Optics |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM Manufacturer |
| Product Origin | Domestic (China) |
| Model | SQUARE ONE |
| Pricing | Upon Request |
| Cuvette Pathlength | 1 cm |
| Enclosure | Light-Tight Lid |
| Filter Slots | 2 (accepts 12.5 mm or 25 mm diameter optical filters) |
| Integrated Mirror | 74-MSP Specular Reflector |
| Diffuse Reflector Option | CVD-DIFFUSE PTFE-coated Surface |
| Collimating Lenses | Three Fused Silica Lenses (200–2000 nm transmission) |
| Fiber Optic Interface | SMA 905 |
| Dimensions | 111 × 90 × 74 mm |
| Weight | 618 g |
| Brand | PERIC |
|---|---|
| Model | DYF |
| Measurement Principle | Catalytic Combustion (Pd-Catalyzed Exothermic Reaction) |
| Measurement Range | 0–1% O₂ |
| Resolution | 0.01% O₂ |
| Response Time (T₉₀) | ≤2.5 min |
| Accuracy | ±5% FS |
| Alarm Threshold | >0.75% O₂ |
| Output Signals | 1–5 V DC, 4–20 mA |
| Display | LED Digital Panel |
| Power Supply | AC 220 V ±10%, 50 Hz ±2.5 Hz |
| Power Consumption | ≤10 W |
| Environmental Operating Range | 0–40 °C, <95% RH |
| Enclosure Rating | Ex d II CT6 (IEC 60079-1 & IEC 60079-2 compliant) |
| Compliance | GB/T 11606–2007, JB/T 8279–1999, GB 3836.1–2010, GB 3836.2–2010 |
| Brand | PERIC |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | GNF-TR-O2 |
| Price | Upon Request |
| Measurement Principle | Fuel Cell Electrochemical Sensor |
| Measurement Range | 0–5.00% O₂ (customizable) |
| Resolution | 0.01% O₂ |
| Accuracy | ≤ ±1% FS |
| Repeatability | ≤ ±1% FS |
| Response Time (T90) | ≤ 30 s |
| Sample Pressure | ≤ 0.2 MPa |
| Sample Flow Rate | 500 ± 10 mL/min |
| Sample Temperature | 0–50 °C |
| Ambient Temperature | 0–50 °C |
| Storage Temperature | 0–50 °C |
| Relative Humidity | 20–80% RH (non-condensing) |
| Power Supply | 24 V DC ±10% |
| Power Consumption | < 1 W |
| Output Signal | 4–20 mA DC (load ≤ 250 Ω) or RS485 digital interface |
| Enclosure Material | Stainless Steel |
| Dimensions | 68 × 68 × 110 mm (L × W × H) |
| Process Connection | 1/4" NPT internal thread |
| Explosion Protection | Ex d II C T6 Gb |
| Temperature Compensation | Integrated |
| Compliance | ATEX Directive 2014/34/EU, IEC 60079-1, GB 3836.1 & GB 3836.2 |