Physical Property Testing Instruments
Filter
Showing 4561–4590 of 12427 results
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-JM8 |
| Pulse Pressure Range | 0–300 MPa (selectable) |
| Pulse Frequency | 0–4 Hz |
| Power Supply | 3-phase 380 V, 50 Hz |
| Total Power | 30 kW |
| Test Media | Hydraulic oil, water, antifreeze |
| Test Stations | 1–8 (configurable) |
| Mounting | Internal |
| Waveform Options | Sine, trapezoidal |
| Test Modes | Pulse fatigue, hold-pressure |
| Control System | Industrial PC-based |
| Pressure Ramp Rate | 0–300 MPa/s (adjustable) |
| Compliance | GB 5568–2005, ISO 4081:2005, SAE J1401–94, SAE J1610–2001, SAE J2050–2001, GM 6250–1995.02, GM 6278M–1997, DIN 73411-1-2:1996, TL 680:1999, TL 52361:1999, GME standards |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-JM8 |
| Test Medium | Hydraulic Oil or Ethylene Glycol Mixture |
| Max Test Pressure | 0–5 MPa (adjustable) |
| Pressure Control Accuracy | ±0.01 MPa (full scale dependent) |
| Pulse Frequency | 5–120 cycles/min (adjustable) |
| Pulse Waveform | Square or Trapezoidal (pulse width configurable per user requirement) |
| Test Medium Temperature Range | Ambient to 160 °C |
| Environmental Temperature Range | –30 °C to 250 °C (adjustable) |
| Maximum Continuous Cycles | ≥1,000,000 |
| Control Method | PC-based Automated Control with Servo/Proportional Actuation |
| Data Interface | USB for data export and report printing |
| Compliance | Designed for ISO 6803, ISO 7241-2, SAE J1401, ASTM D3078, and GB/T 5563 testing protocols |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-LY |
| Chamber Dimensions (W×D×H) | 1000 × 1000 × 1000 mm |
| Spray Ring Radius | R375 mm |
| Nozzle Diameter | Adjustable |
| Nozzle Spacing | 50 mm |
| Oscillation Angles | 60°, 90°, 135° |
| Turntable Speed | 1–17 rpm |
| Water Pressure | ~80 kPa |
| Power Supply | AC 380 V ±10% / 220 V ±10%, 50 Hz |
| Total Power | 2 kW |
| Construction | Cold-rolled steel (A3) exterior with epoxy coating |
| Compliance | GB/T 2423.38–1990, GB/T 4942.2–1993, GB 4208, GB 4706, GB 7000 |
| Brand | Jiubin Instruments |
|---|---|
| Model | JB-N9 |
| Origin | Shanghai, China |
| Laser Wavelength | 532 nm (LD-pumped, temperature-stabilized) |
| Detection Angle | 90° |
| Detector | Hamamatsu Photomultiplier Tube (PMT) with Single-Mode Polarization-Maintaining Fiber |
| Sample Cell | 10 mm × 10 mm quartz cuvette, 4 mL capacity (temperature-controlled) |
| Measurement Range | 1–10,000 nm (sample-dependent) |
| Concentration Range | 0.1–100 mg/L |
| Accuracy | <1% (vs. NIST-traceable standard reference materials) |
| Repeatability | <1% (RSD of mean diameter) |
| Temperature Control Range | 8–45 °C (±0.1 °C stability) |
| Correlator | Custom ASIC-based high-speed photon correlator |
| Data Analysis | Cumulant method + regularized non-negative least-squares (NNLS) inversion |
| Output | Z-average diameter (d<sub>Z</sub>), polydispersity index (PDI), intensity-weighted size distribution, volume/mass distribution (derived), full exportable distribution tables and plots |
| Measurement Time | <60 s per run (excluding dispersion preparation) |
| Compliance | GB/T 29022–2012, ISO 22412:2008 |
| Dimensions | 390 × 255 × 240 mm |
| Power | AC 100–260 V, 50/60 Hz, max. 80 W |
| Operating Environment | 15–40 °C, 20–70% RH, non-condensing |
| Brand | Jiubin Instruments |
|---|---|
| Model | JB-N9 |
| Principle | Dynamic Light Scattering (DLS) / Photon Correlation Spectroscopy (PCS) |
| Measurement Range | 1–10,000 nm |
| Concentration Range | 0.1–100 mg/L |
| Accuracy | <1% (NIST-traceable standard samples) |
| Repeatability | <1% (NIST-traceable standard samples) |
| Laser Source | 532 nm LD-pumped solid-state laser with integrated temperature stabilization |
| Detector | Hamamatsu single-photon-counting photomultiplier tube (PMT) coupled via single-mode polarization-maintaining fiber |
| Scattering Angle | 90° |
| Correlator | Custom ASIC-based high-speed digital photon correlator |
| Sample Cell | 10 mm × 10 mm square quartz cuvette, 4 mL volume, Peltier-controlled (±0.1 °C) |
| Data Analysis | Cumulant method + regularized non-negative least-squares (NNLS) inversion |
| Output | Z-average diameter (d<sub>Z</sub>), polydispersity index (PDI), intensity-weighted size distribution histogram & tabular data |
| Temperature Control Range | 8–45 °C |
| Measurement Time | <60 s per run (excluding dispersion) |
| Dimensions | 390 × 255 × 240 mm |
| Power Supply | AC 100–260 V, 50/60 Hz, max. 80 W |
| Operating Environment | 15–40 °C, 20–70% RH, non-condensing |
| Compliance | GB/T 29022–2012, ISO 22412:2008 |
| Brand | Jiubin Instruments |
|---|---|
| Model | JB-NX |
| Max Torque | 50 N·m / 100 N·m |
| Torque Accuracy | ±1% FS |
| Torque Resolution | 1/20000 FS |
| Angular Measurement Range | 0–1000 rad |
| Angular Accuracy | ±1% |
| Speed Accuracy | ±1% |
| Specimen Diameter | 8–25 mm |
| Gauge Length Adjustment | 0–300 mm |
| Power Supply | 220 V, 50 Hz |
| Operating Temperature | 10–35 °C |
| Relative Humidity | ≤80% RH |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-NX1000 |
| Pricing | Available Upon Request |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-NXD |
| Torque Capacity Options | 500 / 1000 / 2000 / 3000 / 5000 N·m |
| Torque Indication Error | ≤ ±1% |
| Torsion Angle Range | 0–9999.9° |
| Angle Resolution | 0.1° (standard), 0.0001° (high-resolution small-angle mode) |
| Gauge Length | ≥500 mm |
| Specimen Diameter Clamping Range | Ø0–30 mm |
| Torsion Speed | 0–540°/min, continuously variable |
| Speed Accuracy | Better than ±1% of indicated value |
| Power Supply | 220 V ±10%, 50 Hz |
| Brand | Jiubin Instruments |
|---|---|
| Model | JB-P |
| Measurement Principle | Guarded Hot Plate Method (ASTM C177, ISO 8302) |
| Thermal Conductivity Range | 0.010–5.000 W/(m·K) |
| Accuracy | ±3% |
| Repeatability | ±3% |
| Dimensions (L×W×H) | 552 × 550 × 760 mm |
| Origin | Shanghai, China |
| Instrument Type | Guarded Hot Plate Thermal Conductivity Analyzer |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-P |
| Measurement Principle | Guarded Hot Plate Method (ASTM C177, ISO 8302) |
| Temperature Range | -40 °C to +150 °C (with optional cryo/heating modules) |
| Thermal Conductivity Range | 0.010–5.000 W/(m·K) |
| Accuracy | ±3% of reading |
| Repeatability | ±3% |
| Dimensions (L×W×H) | 552 × 550 × 760 mm |
| Compliance | ASTM C177, ISO 8302, GB/T 10294 |
| Brand | Jiubin Instruments |
|---|---|
| Model | JB-PL |
| Measurement Principle | Steady-State Guarded Hot Plate (ASTM C177, ISO 8302) |
| Thermal Conductivity Range | 0.010–5.000 W/(m·K) |
| Accuracy | ±3% |
| Repeatability | ±3% |
| Overall Dimensions (L×W×H) | 552 × 550 × 760 mm |
| Origin | Shanghai, China |
| Instrument Type | Guarded Hot Plate Analyzer |
| Compliance | ASTM C177, ISO 8302, GB/T 10294 |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-PL |
| Measurement Principle | Guarded Hot Plate (Steady-State Heat Flow Method) |
| Test Standard Compliance | ASTM C177, ISO 8302, GB/T 10294 |
| Thermal Conductivity Range | 0.010–5.000 W/(m·K) |
| Accuracy | ±3% |
| Repeatability | ±3% |
| Dimensions (L×W×H) | 552 × 550 × 760 mm |
| Power Supply | 220 V AC, 50 Hz |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Region of Manufacture | Domestic (China) |
| Model | JB-S |
| Instrument Principle | Transient Plane Source (TPS) Method |
| Dimensions (L×W×H) | 500 × 800 × 1200 mm |
| Accuracy | ±3% |
| Thermal Conductivity Range | 0.005–300 W/(m·K) |
| Repeatability | ±3% |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-S |
| Measurement Principle | Transient Plane Source (TPS) Method |
| Dimensions (L×W×H) | 500 × 800 × 1200 mm |
| Accuracy | ±3% |
| Thermal Conductivity Range | 0.005–300 W/(m·K) |
| Repeatability | ±3% |
| Instrument Type | Benchtop Thermal Conductivity Analyzer |
| Brand | Jiubin Instruments |
|---|---|
| Model | JB-STA-200 |
| Origin | Shanghai, China |
| Type | Benchtop Simultaneous DSC-TGA Analyzer |
| Temperature Range | Ambient to 1200 °C |
| Heating Rate | 0.1–100 °C/min |
| DSC Sensitivity | <0.1 µW |
| TGA Resolution | 0.1 µg |
| Atmosphere Control | Dual-gas (N₂/air) with mass flow controller |
| Sample Capacity | Up to 200 mg |
| Compliance | ASTM E1131, ISO 11358, USP <641>, GB/T 19466 |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-T HP |
| Price | USD 12,500 (FOB Shanghai) |
| Max Test Load | Up to 50 kN (configurable per fixture setup) |
| Stroke Range | 0–100 mm |
| Frequency Range | 0.1–10 Hz (electro-hydraulic & servo-motor variants available) |
| Control Mode | Closed-loop PID with real-time load/displacement feedback |
| Test Modes | Constant Amplitude, Constant Load, Stepwise Loading, Block Cycle, Spectrum Loading |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-TGA-101 |
| Temperature Range | Ambient to 1150 °C (optional upgrade to 1450 °C) |
| Temperature Accuracy | ±0.1 K |
| Balance Sensitivity | 0.01 mg |
| Heating/Cooling Rate | 1–80 °C/min |
| Balance Capacity | 1 mg–2 g (expandable to 30 g) |
| Isothermal Hold Time | 0–300 min |
| Atmosphere Control | Dual-gas inlet with mass flow regulation (inert, oxidizing, reducing, static, dynamic) |
| Data Interface | USB |
| Compliance | ASTM E1131, ISO 11358, USP <41>, GLP-ready software audit trail |
| Brand | Jiubin Instruments |
|---|---|
| Temperature Range | Ambient to 1450 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Stability | ±0.1 °C |
| Heating Rate | 1–80 °C/min |
| Cooling Time | 15 min (from 1000 °C to 100 °C) |
| Balance Capacity | 1 mg–2 g (expandable to 30 g) |
| Mass Sensitivity | 0.01 mg |
| Isothermal Hold Time | 0–300 min |
| Atmosphere Control | Dual-gas manifold with mass flow regulation (inert, oxidative, reductive, static, dynamic) |
| Data Interface | USB |
| Power Supply | AC 220 V, 50 Hz |
| Dimensions (L×W×H) | 489 × 400 × 343 mm |
| Brand | JByq |
|---|---|
| Origin | Shanghai, China |
| Model | JB-TGA-1550 |
| Temperature Range | Ambient to 1550 °C |
| Balance Sensitivity | 0.01 µg |
| Heating/Cooling Rate | 0.1–80 K/min |
| Atmosphere | Ambient pressure, dual-gas control (N₂/O₂) |
| Sample Capacity | Single sample, 0.1 mg–2 g (expandable to 50 g) |
| Temperature Stability | ±0.1 °C |
| Temperature Resolution | 0.01 °C |
| Isothermal Duration | 0–300 min adjustable |
| Cooling Time (1000 °C → 100 °C) | ≤15 min |
| Data Interface | USB |
| Software | Proprietary TGA analysis suite with TG/DTG overlay, % mass conversion, Excel export, and report generation |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-THP |
| Price | USD 12,500 (FOB Shanghai) |
| Type | Electromechanical Servo-Controlled Fatigue Testing System for Viscoelastic Energy Dissipation Components |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-TS |
| Max Test Force | Configurable per fixture and load cell selection (standard options: 500 N, 1 kN, 2.5 kN, 5 kN) |
| Compliance | Designed to support ISO 10243, ASTM E4, ASTM F1678, GB/T 25797, GB/T 2611 |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-UL94 |
| Compliance Standards | UL 94, ASTM D5025, ASTM D5207, GB/T 2408 |
| Flame Calibration | 20 mm (1.76 ± 0.01 g Cu block), 125 mm (19.14 ± 0.02 g Cu block) |
| Gas Supply | High-purity methane (≥98%, 37.1 MJ/m³) |
| Burner Power | 500 W (vertical), 225 W (horizontal) |
| Nozzle Diameter | 0.90 ± 0.03 mm |
| Burner Angle Adjustment | 0°, 20°, 45° |
| Chamber Dimensions | W122 × D52 × H120 cm |
| Observation Window | Tempered glass with sealed glove port |
| Exhaust System | Top-mounted forced-draft fume extraction |
| Temperature Measurement | K-type thermocouple + copper calibration blocks, digital display up to 1000 °C |
| Timing Resolution | 0.1 s electronic stopwatch |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-WAW-100KN |
| Type | Hydraulic Universal Testing Machine |
| Maximum Load Capacity | 100 kN |
| Compliance | GB/T 228.1–2021, ASTM E8/E21, ISO 6892-1 |
| Control System | Electro-hydraulic Servo |
| Test Space | Adjustable for Tensile/Compression/Bending |
| Data Acquisition | 100 Hz Sampling Rate |
| Software | Windows-based with Real-time Curve Display, Report Generation (PDF/Excel), Audit Trail Support |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-WAW-100KN |
| Maximum Load Capacity | 100 kN |
| Load Measurement Accuracy | ≤ ±0.5% FS |
| Displacement Resolution | 0.01 mm |
| Test Speed Range | 0.001–500 mm/min (adjustable) |
| Control Mode | Closed-loop hydraulic servo control |
| Crosshead Travel | 1200 mm |
| Power Supply | 380 V AC, 50/60 Hz |
| Compliance | ISO 7500-1, ASTM E4, ASTM E8/E21, GB/T 228.1–2021 |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-WAW-300 |
| Price Range | USD 14,000 – 42,000 (FOB Shanghai) |
| Instrument Type | Electro-Hydraulic Servo Testing Machine |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-WAW-600 |
| Type | Hydraulic Universal Testing Machine |
| Category | Physical Property Testing Instrument |
| Manufacturer Status | Authorized Distributor |
| Country of Origin | China |
| Price | USD 14,700 (FOB Shanghai, subject to configuration and calibration options) |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB–117A |
| Type | Electromechanical Universal Testing Machine |
| Price Range | USD 7,000 – 14,000 (FOB Shanghai) |
| Compliance | GB/T 16491, ISO 6892-1, ASTM E4, ASTM D638, ASTM D412, ASTM D3574 |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB–117A |
| Type | Electronic Universal Testing Machine |
| Category | Physical Property Testing Instrument |
| Application Focus | Tensile Strength, Winding Uniformity, and Mechanical Integrity Assessment of Filamentous Materials (e.g., Fishing Line, Copper Wire, Silk Thread) |
| Compliance Context | Designed for laboratory- and QC-lab–based mechanical characterization per ISO 204, ASTM D2256, and GB/T 228.1–2021 frameworks |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB–120A |
| Type | Electromechanical Universal Testing Machine |
| Load Capacity | 100 kN (10 Ton) |
| Compliance | GB/T 228.1–2021, ISO 6892–1:2019, ASTM E8/E8M |
| Control System | Digital Closed-Loop Servo Control |
| Test Modes | Tensile, Compression, Bending, Yield Strength, Elongation at Break, Modulus of Elasticity |
| Data Acquisition Rate | Up to 1,000 Hz |
| Force Accuracy | ±0.5% of full scale |
| Displacement Resolution | 0.001 mm |
| Crosshead Speed Range | 0.001–500 mm/min |
| Software | JiubinTest v3.2 (GLP-compliant audit trail, user permission levels, FDA 21 CFR Part 11 ready configuration) |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB/FZ-117 |
| Price Range | USD 1,400–7,200 |
| Instrument Type | Electromechanical Universal Testing Machine |
| Load Capacity | 0–2500 N |
| Force Accuracy | ≤ ±0.2% F.S. |
| Sampling Rate | 1000 Hz |
| Crosshead Speed | 1–1000 mm/min (infinitely variable) |
| Effective Travel | 800 mm |
| Elongation Resolution | 0.01 mm |
| Test Frame Width | 400 mm |
| Dimensions (L×W×H) | 665 × 450 × 1640 mm |
| Weight | 175 kg |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Compliance | GB/T 3923.1–2013, GB/T 3923.2–2013, GB/T 13772.1–2008 |