Physical Property Testing Instruments
Filter
Showing 2491–2520 of 4517 results
| Brand | Netzsch |
|---|---|
| Origin | Germany |
| Model | TG 309 Libra Select |
| Temperature Range | 10 °C to 1025/1100 °C |
| Temperature Accuracy | ±0.15 K |
| Heating/Cooling Rate | 0–200 K/min |
| Brand | Netzsch |
|---|---|
| Origin | Germany |
| Model | TG 309 Libra Supreme |
| Temperature Range | 10 °C to 1100 °C |
| Temperature Accuracy | ±0.15 K |
| Heating/Cooling Rate | 0–200 K/min |
| Brand | Netzsch |
|---|---|
| Origin | Germany |
| Model | TG209F1 Libra |
| Temperature Range | 10 °C to 1100 °C |
| Temperature Accuracy | ±0.2 K |
| Balance Sensitivity | 0.1 µg |
| Heating/Cooling Rate | 0–200 K/min |
| Cooling Time | <15 min (1100 °C → RT) |
| Vacuum Level | 10⁻² mbar |
| Maximum Sample Mass | 2 g |
| Furnace Material | Corrosion-Resistant Ceramic |
| Baseline Correction | BeFlat® Intelligent Baseline Compensation |
| Differential Thermal Signal | c-DTA® Function |
| Optional Automation | ASC Auto-Sampler (192 positions) |
| Optional Module | Temperature-Modulated TGA (TM-TG) |
| Brand | Netzsch |
|---|---|
| Origin | Germany |
| Model | TLR 1000 |
| Measurement Principle | Guarded Hot Pipe Method |
| Standards Compliance | DIN EN ISO 8497, DIN EN 1946-5, DIN 52613, ASTM C 534, ASTM C 335 |
| Thermal Conductivity Range | 0.001–0.25 W/(m·K) |
| Accuracy | ±1.0% |
| Repeatability | ±0.5% |
| Sample ID | 18–89 mm |
| Sample OD | 30–220 mm |
| Test Chamber Temperature Range | −15 to +140 °C |
| Heating Pipe Temperature Range | 20 to +200 °C |
| Dimensions (H×W×D) | 45×185×50 cm |
| Sample Throughput | Multi-sample sequential operation |
| Operating Environment | Ambient laboratory conditions |
| Brand | NETZSCH |
|---|---|
| Origin | Germany |
| Model | TMA 4000 SE |
| Temperature Range | –150 to 1700 °C |
| Temperature Accuracy | ±0.1 °C |
| Force Range | 0–4.9 N |
| Displacement Range | ±2.5 mm |
| Dynamic Frequency Range | 0.01–0.5 Hz |
| Measurement Modes | Expansion, Compression, Tension, Penetration, Bending, Dynamic Oscillation, Curing |
| Load Profiles | Constant Force, Sinusoidal (0.01–0.5 Hz), Triangular (0.01–0.2 Hz), Rectangular (0.01–0.1 Hz), Ramp Force (0–0.49 N/min) |
| Deformation Modes | Constant Strain, Strain Ramp (0–50 mm/min), Combined Modes |
| Brand | Netzsch |
|---|---|
| Origin | Germany |
| Model | TMA 402 F1 Hyperion |
| Temperature Range | −150 °C to 1550 °C (with interchangeable furnaces) |
| Temperature Accuracy | ±0.1 °C |
| Force Range | ±3 N |
| Displacement Range | ±2.5 mm |
| Displacement Resolution | 1.25 nm |
| Force Resolution | 0.01 mN |
| Heating Rate | 0–50 °C/min |
| Vacuum Level | 10⁻⁴ mbar |
| Measurement Atmospheres | Oxidizing, Reducing, Inert, Vacuum |
| Dual-Furnace Capability | Yes |
| Compatible with DSC/STA Furnaces | Yes |
| Dynamic Force Mode | Optional |
| Rate-Controlled Sintering (RCS) | Optional |
| Brand | Netzsch |
|---|---|
| Origin | Germany |
| Model | TMA 402 F3 Hyperion |
| Temperature Range | -150°C to 1550°C |
| Temperature Accuracy | ±0.1°C |
| Force Range | ±3 N |
| Displacement Range | ±2.5 mm |
| Displacement Resolution | 0.125 nm |
| Force Resolution | 0.01 mN |
| Heating Rate | 0–50°C/min |
| Measurement Atmosphere | Oxidizing, Reducing, Inert, Vacuum (down to 10⁻⁴ mbar) |
| Dual-Furnace Capability | Yes |
| Compatible Furnaces | Interchangeable with DSC and STA systems |
| Optional Modes | Dynamic Force, Rate-Controlled Sintering (RCS), Compression/Indentation/Bending/Tension |
| Brand | Netzsch |
|---|---|
| Origin | Germany |
| Model | TNB Non-Combustibility Furnace |
| Compliance | ISO 1182, EN 13501-1, GB 8624 |
| Chamber Material | Stainless Steel |
| Viewing Mirror | 300 × 320 mm, 30° tilt |
| Thermocouple Type | Armored N- or K-type |
| Temperature Range | Up to 1300 °C |
| Resolution | 0.1 K with Cold-Junction Compensation |
| Integrated Control Unit | Single-board computer with 32 GB SSD |
| Data Interface | USB and Ethernet |
| Heating Control | Digital linear ramping with real-time monitoring |
| Brand | Netzsch |
|---|---|
| Origin | Germany |
| Model | TRDA Optical Smoke Density Measurement System |
| Light Source | 10 W halogen lamp, color temperature 2900 K |
| Beam Diameter | 22–500 mm |
| Photometric Linearity | < ±1.5% |
| Compliance | DIN 50055 |
| Control Interface | USB & RS232 |
| Integrated Computing | Single-board computer with Windows OS, TRDA software, high-resolution color touchscreen |
| Accessories Support | Compatibility with single-burner and bundled-cable fire testing configurations |
| Software Licensing | TRDA software — exclusive licensed implementation |
| Brand | Netzsch |
|---|---|
| Origin | Germany |
| Model | TRDL Helium-Neon Laser Smoke Density Tester |
| Light Source | He–Ne laser (632.8 nm) |
| Optical Path Length | 10 m (unobstructed) |
| Calibration Filters | Neutral density filters with OD 0.3 and 0.8 |
| Compliance | ISO 5660-2, ASTM E662, NFPA 265, UL 94, IEC 60695-2-2 |
| Interface | USB + RS232 |
| Control System | Integrated single-board computer with Windows OS, high-resolution color touchscreen, TRDL proprietary software |
| Brand | Netzsch |
|---|---|
| Origin | Germany |
| Model | TSP Smoldering Test Apparatus |
| Compliance Standard | DIN EN 16733 |
| Sample Dimensions | 800 mm (L) × 300 mm (W) × ≤100 mm (T) |
| Sample Holder Material | Stainless Steel |
| Thermocouple Type | K-type NiCr–Ni armored |
| Ambient Operating Temperature | +20 ± 10 °C |
| Fire Suppression Plate Material | Calcium Silicate |
| Gas Control | Front-mounted main gas valve and pressure regulator |
| Flow Control | Adjustable flow restrictor and variable-area rotameter |
| Safety Features | Integrated flame-quenching plate with certified thermal inertia |
| Brand | Netzsch |
|---|---|
| Origin | Germany |
| Model | UL94 Vertical/Horizontal Flame Chamber |
| Standards Compliance | UL 94 (5th Ed.), IEC/EN 60695-11-10, -11-20, -11-3, -11-4, ISO 9773 |
| Sample Dimensions (Strip) | 125.0 ± 5.0 mm × 13.0 ± 0.5 mm |
| Sample Dimensions (Sheet) | ≥150.0 ± 5.0 mm × ≥150.0 ± 5.0 mm |
| Burner Power | 50 W / 500 W |
| Burner Tilt Angles | 0°, 20°, 45° |
| Touchscreen Interface | 10" High-Resolution Capacitive Display |
| Enclosure Material | Sandblasted Stainless Steel (AISI 304) |
| Integrated Control Unit | Embedded Industrial PC with 32 GB SSD Storage |
| Brand | NIUMAG |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PQ001 |
| Pricing | Available Upon Request |
| Brand | NIUMAG |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PQ001-Powder |
| Pricing | Available Upon Request |
| Brand | NIUMAG |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PQ001 |
| Pricing | Available Upon Request |
| Brand | NIUMAG |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Region of Manufacture | Domestic (China) |
| Model | PQ001-NMR |
| Measurement Scope | In-situ wettability analysis of particle suspensions in native liquid media |
| Brand | NIUMAG |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | VTMR-niumag |
| Pricing | Available Upon Request |
| Magnet Type | Permanent Magnet |
| Magnetic Field Strength | 0.5 ± 0.05 T |
| Standard Temperature Range | Room Temperature to 130 °C |
| Optional Cryo/High-Temp Module | −100 °C to 200 °C |
| Imaging Capability | Optional |
| Measurement Modes | T₁ & T₂ Relaxometry, NMR Imaging (MRI), Quantitative Analysis |
| Typical Acquisition Time | ≤2 min per sample |
| Sample Forms | Solutions, Gels, Solids, Powders, Particulates |
| Core Technology | FLAT (Fast Low-Amplitude Transient) Pulse Sequence for Short-T₂/Weak-Signal Detection |
| Brand | 3i |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 2 AXIS PIEZO ROTATOR |
| Pricing | Upon Request |
| Rotation Range (per axis) | ±90° |
| Angular Resolution | 1 µdeg (0.000001°) |
| Operating Temperature Range | 10 mK – 300 K |
| Maximum Magnetic Field Compatibility | 15 T |
| Compatible Carrier | Standard 20-pin Leadless Chip Carrier (LCC) |
| Drive Mechanism | Piezoelectric Motor |
| Controller Interface | USB 2.0 |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | No.214 |
| Quotation | Upon Request |
| Standards Compliance | ASTM D2863, ISO 4589-2, JIS K6269 & K7201 |
| Combustion Column ID | φ75±3 mm (standard), φ95 mm (optional) |
| Height | 450±5 mm |
| Gas Flow Control | Dual digital mass flow meters (O₂ & N₂) |
| Pressure Monitoring | O₂/N₂ supply pressure gauges + leak detection port |
| Ignition Source | Adjustable propane or pipeline gas burner (flame length 6–25 mm) |
| Sample Holder | U-shaped stainless steel fixture |
| Sample Types | Rigid/flexible plastics, elastomers, rubber compounds, textile fibers, and laminates |
| Power Supply | AC 100 V, 1-phase, 3 A, 50/60 Hz |
| Dimensions (W×D×H) | Approx. 600 × 290 × 660 mm |
| Weight | Approx. 30 kg |
| Key | Temperature Range: +100°C to +132°C (saturated steam temperature) |
|---|---|
| Humidity Range | 75–100% RH (saturated steam) |
| Pressure Control | 0–6 kgf/cm² (PID-controlled, computer-integrated) |
| Operating Pressure | 2.0 kgf/cm² (rated for ≥6 atm burst pressure) |
| Pressure Ramp Time | ≤45 min (0 → 2.0 kgf/cm²) |
| Temperature Control | PID microprocessor-based (VT-4810 controller), RT+10°C to 200°C, K-type thermocouple input, SSR solid-state relay output |
| Steam Circulation | Natural convection of saturated water vapor |
| Test Duration | 0.00–999.99 hr |
| Safety Interlocks | Dual-pressure/temperature sensing, vacuum-assisted air purge, auto-depressurization, auto-vacuum break, auto-refill (up to 1000 hr continuous operation) |
| Compliance | ASTM D2247, DIN 50017, ISO 6270-2, IEC 60068-2-30, NACE TM0177, UL 746C, JIS Z 2243, MIL-STD-810H Method 507.6 |
| Sample Access | Horizontal cylindrical chamber with radial door latch, self-sealing under internal pressure |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Pressure Range | 0–6 kgf/cm² (0–0.6 MPa) |
| Operating Pressure | 2.0 kgf/cm² (≈200 kPa gauge) |
| Temperature Range | +100°C to +132°C (saturated steam), Extended Range: RT+10°C to 200°C |
| Humidity Range | 75–100% RH (saturated steam environment) |
| Pressure Ramp Time | ≤45 min (0 → 2.0 kgf/cm²) |
| Test Duration | 0.00–999.99 hr |
| Safety Locking | Pressure-actuated mechanical door interlock |
| Vacuum Preconditioning | Integrated vacuum pump with HEPA-filtered air purge |
| Compliance | ASTM D3574, DIN 53504, ISO 188, IEC 60068-2-13, UL 746B, MIL-STD-810H, JIS K 6257, NACE TM0177 |
| Key | Temperature Range: +100°C to +132°C (saturated steam temperature) |
|---|---|
| Humidity Range | 75–100% RH (saturated steam) |
| Pressure Control | 0–6 kg/cm² via PID-based digital pressure controller |
| Operating Pressure | 2.0 kg/cm² (≥6 atm burst rating) |
| Pressure Ramp Time | ≤45 min (0 → 2.0 kg/cm²) |
| Temperature Control | PID microprocessor with PV/SV dual display, K-type thermocouple input, SSR solid-state relay output, RT+10°C to 200°C range |
| Steam Circulation | Natural convection of saturated steam |
| Timer Range | 0.00–999.99 hr |
| Chamber Geometry | Horizontal cylindrical inner chamber with vacuum-sealed door interlock |
| Safety System | Dual-locking pressure/temperature interlock, automatic depressurization, vacuum purge, and auto-refill (up to 1000 hr continuous operation) |
| Compliance | ASTM D2247, DIN 50017, ISO 6270-2, IEC 60068-2-30, UL 746C, MIL-STD-810H, JIS Z 2243, NACE TM0177, BS EN 60068-2-30 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 13,500 (FOB) |
| Temperature Range | +105°C to +132°C |
| Temp. Uniformity | ±1.5°C |
| Temp. Stability | ±0.5°C |
| Humidity Range | 75–100% RH (adjustable) |
| Humidity Uniformity | ±3.0% RH |
| Humidity Stability | ±1.5% RH |
| Pressure Range (gauge) | 0–2 kg/cm² (adjustable) |
| Max. Operating Pressure | 3.0 kg/cm² |
| Safety Pressure Capacity | 4.0 kg/cm² (1 atm + 3 kg/cm²) |
| Vacuum Preconditioning | Yes (with <1 µm particulate-filtered air intake) |
| Test Duration | 0–999 h |
| Pressurization Time | ~30 min (0 → 2 kg/cm²) |
| Heating Time (ambient to +132°C, no-load) | ~30 min |
| Internal Volume | Configurable |
| Power Supply | AC 220 V / 380 V, 50/60 Hz |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | –70 °C to +150 °C (Rapid Cycling Range: –45 °C to +85 °C) |
| Linear Ramp Rate | 3–15 °C/min |
| Nonlinear Ramp Rate | 3–20 °C/min |
| Humidity Range (Optional) | 5–98% RH |
| Temperature Resolution/Accuracy | 0.1 °C / ±0.5 °C |
| Humidity Resolution/Accuracy | 0.1% RH / ±2.5% RH |
| Temperature Uniformity | ±2.0 °C |
| Humidity Uniformity | ±3.0% RH |
| Interior Material | SUS304 Stainless Steel |
| Insulation | High-Density Polyurethane Foam with Ethyl Chloroformate Base |
| Cooling System | Air-Cooled or Water-Cooled |
| Refrigerant | R-404A & R-23 (DuPont Certified, Eco-Compliant) |
| Compressor | Tecumseh (France) |
| Key | Brand: OEM / Custom-Built |
|---|---|
| Origin | Imported (Global Sourcing) |
| Manufacturer Type | Authorized Distributor |
| Price | USD 2,650 (FOB) |
| Control System Options | TIME880 Color Touchscreen Controller (Korea), TIME300 Digital Film-Button Controller (Korea), OYO 8227 PID Touch Controller (Japan) |
| Sensor | PT100 Platinum Resistance Thermometer |
| Refrigeration | Hermetic Tecumseh or Semi-Hermetic Copeland Scroll Compressor |
| Heating | Independent Ni-Cr Alloy Sheathed Heater |
| Insulation | 80–100 mm High-Density Glass Fiber Blanket |
| Viewing Window | 300 × 400 mm Tempered Double-Glazed with Integrated Heating Element |
| Test Port | Ø50 mm Left-Side Penetration Port |
| Sealing | Dual-Layer High-Tensile Silicone Gasket (–70°C to +150°C Operational Range) |
| Compliance | Designed to Support ASTM D3418, IEC 60068-2-14, MIL-STD-810H Method 503.7 Protocols |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Capacity | 150 L / 408 L / 800 L |
| Internal Dimensions | 500×600×500 mm / 600×850×800 mm / 1000×1000×800 mm (W×H×D) |
| Temperature Range | −20 °C to +150 °C / −40 °C to +150 °C / −60 °C to +150 °C |
| Humidity Range | 20–98 %RH |
| Temp. Uniformity | ±0.5 °C |
| RH Uniformity | ±3 %RH |
| Temp. Stability | ±0.3 °C |
| RH Stability | ±2.5 %RH |
| Heating Rate | −40 °C to +100 °C in ≈45 min |
| Cooling Rate | +20 °C to −40 °C in ≈55 min |
| Refrigeration System | Dual-stage, hermetic imported compressors (air-cooled or water-cooled options) |
| Heating Method | Stainless steel finned heaters |
| Humidification | Surface evaporation with auxiliary humidifier, dry-run and overheat protection |
| Dehumidification | Refrigerant-based latent heat removal |
| Insulation | Rock wool + rigid polyurethane foam |
| Interior Material | SUS#304 stainless steel |
| Exterior Finish | Powder-coated steel or optional SUS#304 |
| Power Supply | AC 220 V / 380 V ±10 %, 1-phase or 3-phase, 50/60 Hz |
| Brand | Nordson Dage |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Quadra 7 |
| Price | USD 1000 (Base Configuration Reference Only) |
| Brand | Nordson Dage |
|---|---|
| Origin | United Kingdom |
| Model | XD7500VR Jade FP |
| X-ray Tube Type | Open Transmission Tube |
| Operating Voltage Range | 30–160 kV |
| Target Power | 3 W |
| Feature Resolution | 950 nm (0.95 µm) |
| Geometric Magnification | Up to 1400× |
| System Magnification | Up to 4200× |
| Maximum Sample Dimensions | 736 × 580 mm |
| Detector Resolution | 1.33 MP |
| Compliance | CE, RoHS, ISO 9001-certified manufacturing environment |
| Software Platform | DAGE VisionX™ v5.x with GLP-compliant audit trail and FDA 21 CFR Part 11-ready configuration options |
| Brand | North Guang Precision Instrument |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Manufacturer |
| Model | JF-3 |
| Price Range | USD 700 – 1,400 (FOB) |
| Oxygen Measurement Range | 0–100 vol% |
| Resolution | ±0.1% O₂ |
| Overall Accuracy | Class 0.2 |
| Gas Flow Control | 0–10 L/min (60–600 L/h), adjustable via dual needle valves |
| Response Time | <5 s |
| Combustion Column | Quartz glass tube, ID ≥75 mm, height 300 mm, total height 450 mm |
| Gas Linear Velocity in Column | 40 ±2 mm/s |
| Pressure Regulation | Inlet pressure 0.2–0.3 MPa |
| working pressure for O₂/N₂ | 0.05–0.15 MPa each |
| Ignition Source | Propane/butane torch with flame length 5–60 mm (standard ignition flame: 16 ±4 mm) |
| Sample Holders | Dual-configurable—self-supporting vertical clamp & non-self-supporting frame-type fixture |
| Power Supply | AC 220 V ±10%, 50 Hz, max. 50 W |
| Compliance | GB/T 2406.1–2008, GB/T 2406.2–2009, ASTM D2863, ISO 4589-2, IEC 61144, NES 714 |
| Brand | North Guang Precision Instrument |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HMPL-2000 |
| Max Test Force | 2000 N |
| Stroke Range | 0–100 mm |
| Compression Frequency | 20–120 cycles/min |
| Platen Diameter | Ø250 mm |
| Specimen Dimensions | (380±20) mm × (380±20) mm × (50±2) mm |
| Load Accuracy | ±20 N (at 750 N setpoint) |
| Display | LCD with Chinese UI |
| Compliance | GB/T 18941, ISO 3385, QC/T 56-93, JASO B408-84 |