- All
- Favorite
- Popular
- Most rated
| Brand | Shenkai |
|---|---|
| Origin | Shanghai, China |
| Model | SYP4110-I |
| Heating Method | Aluminum Block Furnace (Alloy Cast Aluminum) |
| Heating Power | 700 W or 750 W |
| Sample Capacity | 6 Test Cavities |
| Grease Cup | Chrome-Plated Brass, Compliant with GB/T 3498 |
| Test Tube | Edge-Rimmed Thin-Walled Soft Glass, Compliant with GB/T 3498 |
| Cup Holder | Heat-Resistant Hard Glass |
| Temperature Sensor | Liquid-in-Glass Thermometer per GB/T 514, Range: −5 to 400 °C, Graduation: 1 °C |
| Standards Compliance | GB/T 3498, ASTM D2265 |
| Application | Laboratory-Scale Dropping Point Determination of Lubricating Greases |
| Brand | Shenkai |
|---|---|
| Origin | Shanghai, China |
| Model | SYP4106-I |
| Motor | Horizontal single-phase capacitor-start motor, 220 V AC, 50 Hz, 370 W, 1400 rpm |
| Shear Rate | 60 cycles/min |
| Stroke | 67–71 mm |
| Orifice Diameter on Plate | Ø6.35 mm (+0.13/−0.00 mm) |
| Temperature Range | 0–50 °C (bimetallic thermometer, 0.5 °C graduation) |
| Max Counter Capacity | 99999 |
| Power Supply | AC 220 V, 50 Hz |
| Compliance | GB/T 269 |
| Brand | Shenkai |
|---|---|
| Origin | Shanghai, China |
| Model | SYP3011-II |
| Application Standard Compliance | GB/T 11143, ASTM D665, IP 135 |
| Test Temperature | 60 ± 1 °C |
| Stirring Speed | 1000 ± 50 rpm |
| Stirrer Geometry | Inverted "T"-shaped blade (25 × 6 × 0.6 mm) |
| Test Specimen Rod | Conforms to GB/T 11143 / ASTM D665 / IP 135 specifications |
| Sample Cup | Φ70 × 127 mm, 400 mL tall-form beaker (no spout) |
| Thermometer Range | 50–70 °C, graduation 0.5 °C |
| Bath Capacity | High-volume constant-temperature water bath |
| Parallel Testing Capacity | 4 samples simultaneously |
| Stirring Mechanism | Synchronous belt-driven, vertically adjustable shafts with quick-release clamps |
| Brand | Shenkai |
|---|---|
| Origin | Shanghai, China |
| Model | SYP1026-II |
| Application Standard | ASTM D1298, ISO 3675, GB/T 1884 |
| Temperature Range | 15–100 °C (with optional chiller) |
| Temperature Stability | ±0.2 °C |
| Bath Capacity | Φ300 × 300 mm |
| Density Measurement Method | Glass Hydrometer Immersion (20 °C Reference) |
| Bath Stirring | 15 W Motor, 1250 rpm, Φ50 mm Impeller |
| Thermometer Accuracy | ±0.1 °C (calibrated traceable to NIM), 0.2 °C Graduation |
| Power Supply | 220 VAC ±10%, 50 Hz |
| Heating Power | 800 W |
| Cylinder Volume | 500 mL |
Show next