Ducom
Filter
Showing all 15 results
| Brand | Ducom |
|---|---|
| Origin | USA |
| Model | AFP1 |
| Test Method | Closed Cup (ABEL) |
| Operation Mode | Fully Automatic |
| Applicable Standards | EN 924, IP 170, IP 491, IP 492, ISO 1516, ISO 3679, ISO 13736 |
| Temperature Range | −50 °C to +100 °C |
| Temperature Accuracy | ±0.1 °C |
| Temperature Resolution | 0.06 °C |
| Repeatability | ±0.1 °C |
| Sensor | Class A PT100 |
| Ignition System | Dual electric spark igniter with ionization flame detection |
| Sample Cup | Brass, ASTM-compliant geometry |
| Safety Features | Thermal cut-off, automatic shutter, integrated flame detection |
| Dimensions (W×D×H) | 310 × 470 × 520 mm |
| Weight | 27 kg |
| Power Supply | 220 V ±15 %, 50–60 Hz or 115 V ±15 %, 60 Hz |
| Display | 8.4″ TFT/LCD touchscreen interface |
| Data Output | Excel-compatible CSV export |
| Compliance | GLP/GMP-ready audit trail, 21 CFR Part 11–compatible software architecture |
| Brand | Ducom |
|---|---|
| Origin | USA |
| Model | AJET |
| Instrument Type | High-Temperature Tribological Tester |
| Max Friction Force | 2000 N |
| Friction Force Resolution | 0.1 mN |
| Max Operating Temperature | 1000 °C |
| Erosion Velocity Range | 30–150 m/s |
| Abrasive Feed Rate | 1–5 g/min (nominal 200-mesh Al₂O₃) |
| Impact Angles | 15°, 30°, 45°, 60°, 75°, 90° (customizable with upgraded fixture) |
| Nozzle Orifice Diameter | 1.5 mm (optional 2–3 mm for ≥800 °C operation) |
| Specimen Dimensions | 25 × 25 × 5 mm (custom sizes available) |
| Abrasive Hopper Capacity | 2 L |
| Brand | Ducom |
|---|---|
| Origin | USA |
| Model | ASTM D1831 |
| Test Method | Open-Cup |
| Operation Mode | Automatic |
| Applicable Standards | ASTM D1831, ASTM D7342 |
| Repeatability | ±0.1°C |
| Ignition Method | Automated temperature-controlled testing |
| Temperature Range | Up to 200°C |
| Rotational Speed | Up to 300 rpm |
| Timer Range | 1 minute to 100 hours |
| Temperature Control Accuracy | ±1°C |
| Brand | Ducom |
|---|---|
| Origin | USA |
| Model | CFP |
| Test Method | Cleveland Open Cup (COC) |
| Operation Mode | Semi-Automatic (Manual Sample Loading + Automated Detection & Control) |
| Applicable Standards | ASTM D92, FTM 791-1103, IP 36, ISO 2592, JIS K2265-4 |
| Temperature Range | +79 °C to 400 °C |
| Temperature Accuracy | ±0.1 °C |
| Temperature Resolution | 0.06 °C |
| Heating Sensor | Class A PT100 |
| Ignition System | Dual electric igniters + pilot flame |
| Detection Principle | Ionization-based flame detection |
| Safety Features | Thermal cutoff, real-time fire detection, self-diagnostic routines |
| Dimensions (W×D×H) | 48 × 37 × 61 cm |
| Weight | 32 kg |
| Power Supply | 220 V ±15 %, 50–60 Hz or 115 V ±15 %, 60 Hz |
| Data Output | Excel-compatible CSV files |
| Display | 8-inch integrated TFT/LCD touchscreen PC |
| Brand | Ducom |
|---|---|
| Model | CPP |
| Origin | USA |
| Type | Integrated Dual-Function Petroleum Low-Temperature Property Analyzer |
| Temperature Range | –80 °C to +80 °C |
| Temperature Resolution | 0.06 °C |
| Temperature Accuracy | ±0.1 °C (PT100 Class A) |
| Cooling System | Single-stage (to –40 °C) or Dual-stage (to –80 °C), CFC-free motor-compressor |
| Detection Methods | Cloud Point — coaxial infrared optical pulse detection |
| Compliance | ASTM D2500, D5771–D5773, D97, D5853, D5950 |
| Power Supply | 220 V ±15 %, 50–60 Hz or 115 V ±15 %, 60 Hz |
| Dimensions (W×D×H) | 66 × 60 × 80 cm |
| Weight | 60 kg (max 6-test-head configuration) |
| Interface | 12″ integrated high-resolution TFT/LCD touch-panel PC |
| Brand | Ducom |
|---|---|
| Model | DPP |
| Type | Automatic Pour Point Tester |
| Origin | USA |
| Cooling Capacity | Single-stage to –40°C, Dual-stage to –80°C |
| Temperature Range | –80°C to +80°C |
| Resolution | 0.06°C |
| Accuracy | ±0.1°C |
| Repeatability | Compliant with ASTM D5950, ISO 3016, and IP 441 |
| Temperature Sensor | Class A PT100 |
| Display | 12″ TFT/LCD Touchscreen PC |
| Power Supply | 220 V ±15% / 50–60 Hz or 115 V ±15% / 60 Hz |
| Dimensions (W×D×H) | 66 × 60 × 80 cm |
| Weight | 60 kg (max. 6 test heads) |
| Standards Compliance | ASTM D97, D5853, D5950 |
| Brand | Ducom |
|---|---|
| Origin | USA |
| Model | FBT-3 |
| Instrument Type | Four-Ball Friction and Wear Tester |
| Maximum Load Capacity | 10,000 N |
| Load Resolution | 0.5 N |
| Rotational Speed Range | 0–3000 rpm |
| Temperature Range | Ambient to 120 °C (optional high-temp upgrade to 1000 °C) |
| Test Ball Diameter | 12.7 mm |
| Compliance Standards | ASTM D2783, D2596, D2266, D4172, D5183 |
| Brand | Ducom |
|---|---|
| Origin | USA |
| Model | FPM |
| Detection Method | Closed-Cup |
| Operation Mode | Fully Automated |
| Compliant Standards | ASTM D93 (Methods A, B, C), DIN EN 22719, IP 34, ISO 2719 |
| Temperature Range | 0 °C to 420 °C |
| Temperature Resolution | 0.01 °C |
| Accuracy | ±0.1 °C |
| Repeatability | ±0.1 °C |
| Ignition System | Automated electronic spark ignition with temperature-controlled test sequence |
| Sample Chamber | Stainless steel, corrosion- and impact-resistant |
| Temperature Sensors | Dual PT100 (sample & bath) |
| Dimensions (W×D×H) | 37 × 52 × 32 cm |
| Weight | 30 kg |
| Power Supply | 220 V ±15 %, 50–60 Hz or 115 V ±15 %, 60 Hz |
| Brand | Ducom |
|---|---|
| Model | FPT |
| Origin | USA |
| Category | Petroleum Low-Temperature Property Tester |
| Cooling Range | −90 °C to +80 °C |
| Temperature Resolution | 0.01 °C |
| Accuracy | ±0.1 °C |
| Repeatability | Compliant with ASTM D2386, D5972, D7154 and IP 528 |
| Temperature Sensor | Class A PT100 |
| Cooling System | Fluorocarbon-free dual-stage refrigeration |
| Detection Method | Coaxial fiber-optic infrared pulse reflection with mirror-enhanced crystal detection |
| Stirring Mechanism | Motor-driven triple-brass-coil agitator |
| Power Supply | 220 V ±15 %, 50–60 Hz or 115 V ±15 %, 60 Hz |
| Dimensions (W×D×H) | 34 × 60 × 80 cm |
| Weight | 34 kg |
| Standards Compliance | ASTM D2386, D5972, D7154, D852, D1177, D1655 |
| Brand | Ducom |
|---|---|
| Origin | USA |
| Model | HPTW |
| Instrument Type | High-Temperature Tribological Tester |
| Max Friction Force | 2000 N |
| Friction Force Resolution | 2 mN |
| Max Temperature | 300 ℃ |
| Chamber Pressure Range | 5–1000 bar |
| Sliding Velocity | 5–50 m/s |
| Normal Load Range | 100–2000 N |
| Compound Wear Measurement Range | 0–4000 µm |
| Coefficient of Friction Range | 0–1 |
| Frictional Torque Range | 0–10 N·m |
| Temperature Control Accuracy | ±1 ℃ |
| Pressure Control Accuracy | ±0.2% FS |
| Wear Resolution | 1 µm |
| Torque Measurement Accuracy | ±0.05% FS |
| Sliding Velocity Accuracy | ±0.01% FS |
| Normal Load Accuracy | ±0.2% FS |
| Brand | Ducom |
|---|---|
| Origin | USA |
| Model | Noac |
| Temperature Range | 0–320 °C |
| Test Range | 225–275 °C |
| Temp. Resolution | 0.01 °C |
| Temp. Accuracy | ±0.1 °C |
| Temp. Repeatability | ASTM D5800-compliant |
| Vacuum Control | –2 mbar (electronic, continuous) |
| Pressure Differential | 20 mmH₂O (auto-regulated) |
| Vacuum Accuracy | ±1% |
| Heating Method | Oil Bath (Method A) or Sample-Controlled (Method B) |
| Compliance | ASTM D5800, IP 42 |
| Dimensions | 40 × 45 × 45 cm (W×D×H) |
| Weight | 22 kg |
| Power | 220 V ±15%, 50–60 Hz or 115 V ±15%, 60 Hz |
| Brand | Ducom |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | SJET |
| Instrument Type | High-Temperature Tribological Tester |
| Maximum Friction Force | 2000 N |
| Friction Force Resolution | 0.1 mN |
| Maximum Operating Temperature | 1000 °C |
| Jet Velocity | 10–50 m/s |
| Jet Diameter | 4 mm (fixed) |
| Maximum Erosion Flux | 100–2000 cc/min |
| Impact Angle | 15–90° (adjustable in 15° increments) |
| Specimen Dimensions | 25 × 25 × 4.8 mm (custom sizes available) |
| Sample Chamber Volume | 150 × 150 × 150 mm |
| Nozzle-to-Specimen Distance | 50 mm |
| Water Tank Capacity | 1200 L |
| Slurry Tank Capacity | 60 L |
| Closed-Loop Slurry Recirculation System | Yes |
| Brand | Ducom |
|---|---|
| Origin | USA |
| Model | TR-101 |
| Instrument Type | (Micro/Nano) Scratch Tester |
| Maximum Indentation Depth | 5 mm |
| Effective Normal Load Range | 10 mN – 200 N |
| Load Resolution | 1 µN |
| Displacement Range | 0.1 mm – 50 mm |
| Displacement Resolution | 1 µm |
| Maximum Friction Force | 200 N |
| Indenter Tip | Rockwell C Diamond Tip |
| Brand | Ducom |
|---|---|
| Origin | USA |
| Model | TR-20-HTVT |
| Maximum Friction Force | 20 N |
| Friction Force Resolution | 0.4 mN |
| Maximum Temperature | 800 °C |
| Operating Environment | High Vacuum (down to 10⁻⁷ mbar) or Controlled Atmosphere (inert gas, humidified air) |
| Sliding Modes | Unidirectional (CW/CCW), Bidirectional (angular oscillation), Spiral/Programmable Wear Tracks |
| Load Control | Programmable (constant, ramp, stepped) |
| Rotational Speed Range | 0.1–2000 rpm |
| Wear Track Diameter | 15–70 mm |
| Sample Geometry | Pin/Ball (Ø3–10 mm) vs. Rotating Disk (Ø100 mm) |
| Temperature Control Resolution | ±1 °C |
| Displacement Resolution | 0.1 µm |
| Angular Oscillation Frequency | 0.1–5 Hz |
| Stroke Angle Range | 0–10° |
| Brand | Ducom |
|---|---|
| Origin | USA |
| Model | UniTest 750 |
| Maximum Friction Force | 1000 N |
| Friction Force Resolution | 1 nN |
| Maximum Test Temperature | 1000 °C |
| Instrument Type | Multi-Functional Tribometer |
| Configuration | Modular, Open-Architecture Desktop Platform |