HUXI
Filter
Showing 1–30 of 108 results
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | 2XZ-2 |
| Instrument Type | Rotary Vane Pump |
| Pumping Speed | 7.2 m³/h (2 L/s) |
| Ultimate Vacuum Pressure | 1.33 × 10⁻¹ Pa |
| External Dimensions | 480 × 145 × 275 mm |
| Weight | 20 kg |
| Motor Power | 0.37 kW |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | FJ200 |
| Instrument Type | Probe-Type Rotor-Stator Homogenizer |
| Dimensions (W×D×H) | 250 × 350 × 600 mm |
| Volume Capacity | 30–1500 mL |
| Speed Range | 300–23,000 rpm |
| Input Power | 280 W |
| Output Power | 200 W |
| Rated Torque | 83 N·cm |
| Probe Diameters | φ12 mm and φ18 mm |
| Power Supply | AC 220 V, 50 Hz |
| Operation Mode | Intermittent Duty |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer | HUXI Scientific Instrument Co., Ltd. |
| Pump Type | Dual-Stage Diaphragm Pump |
| Air Displacement Rate | 20 L/min |
| Ultimate Vacuum | 6–8 mbar |
| Dimensions (L×W×H) | 315 × 165 × 270 mm |
| Weight | 10 kg |
| Motor Power | 120 W |
| Noise Level | <55 dB(A) |
| Operating Temperature Range | 5–40 °C |
| Relative Humidity Limit | <80% RH |
| Membrane Material | HNBR + PTFE Composite |
| Valve Material | FKM / FFPM |
| Diaphragm Surface | PTFE-Coated |
| Electrical Rating | 220 V / 50 Hz |
| Duty Cycle | Continuous Operation |
| Thermal Protection | Built-in Bimetallic Overtemperature Cut-off Switch |
| Vacuum Regulation | Integrated Adjustable Vacuum Control Valve |
| Exhaust Filtration | Standard Particle Filter (Optional Acid Gas Scrubber Available) |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HB-40B |
| Pump Type | Diaphragm Vacuum Pump |
| Oil-Free Design | Yes |
| Air Displacement Rate | 40 L/min |
| Ultimate Vacuum | 6–8 mbar |
| External Dimensions (L×W×H) | 320 × 170 × 270 mm |
| Weight | 11 kg |
| Motor Power | 240 W |
| Noise Level | <55 dB(A) |
| Operating Temperature Range | 5–40 °C |
| Relative Humidity Limit | <80% RH |
| Motor Speed | 1450 RPM |
| Voltage/Frequency | 220 V / 50 Hz |
| Pump Head Material | PTFE-coated diaphragm with HNBR substrate |
| Valve Material | FKM or FFPM |
| Interface Port Size | 10 mm |
| Duty Cycle | Continuous Operation |
| Built-in Features | Vacuum Regulating Valve, Solid Drain Valve, Analog Vacuum Gauge, Thermal Overload Protection Switch |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | HF-1L |
| Instrument Classification | Jacketed Glass Reactor |
| Usable Volume | 1 L |
| Vessel Material | Borosilicate Glass (3.3) |
| Operating Pressure Range | Low-Pressure / Vacuum-Compatible |
| Maximum Vacuum Level | −0.095 MPa (absolute) |
| Jacket Inlet/Outlet | Standardized G1/2" Fittings |
| Stirring Drive | Top-Mounted Mechanical Stirrer with Imported Sealed Bearing Assembly |
| Sealing Materials | PTFE + Borosilicate Glass |
| Temperature Monitoring | Integrated Pt100 Sensor Port |
| Vacuum & Temperature Measurement | Optional Digital Dual-Parameter Display Unit |
| Drain Valve | Quick-Release PTFE-Ball Valve with Zero-Dead-Volume Design |
| Condenser Type | Standard All-Glass Dimroth or Coil Condenser (Configurable) |
| Base Frame | 316 Stainless Steel Support with Adjustable Feet |
| Compliance | Designed per GB/T 25187–2010 (Laboratory Glass Reactors), Compatible with ISO 3585 (Borosilicate Glass 3.3 Specifications) |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HG-30 |
| Instrument Type | Diaphragm Pump |
| Product Type | Oil-Free Vacuum Pump |
| Pumping Speed | 30 L/min |
| Ultimate Vacuum | −0.085 MPa (150 mbar) |
| External Dimensions | 250 × 135 × 210 mm |
| Weight | 7.5 kg |
| Motor Power | 180 W |
| Diaphragm Material | PTFE-Coated Imported Corrosion-Resistant Elastomer |
| Noise Level | <50 dB(A) |
| Inlet/Outlet Port Size | 8 mm |
| Port Material | Tapered Brass Fitting |
| Pressure Regulation | Adjustable Vacuum Output |
| Dual-Mode Operation | Vacuum & Positive Pressure (0 psi gauge) |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HG-30D |
| Instrument Type | Diaphragm Pump |
| Product Type | Oil-Free Vacuum Pump |
| Pumping Speed | 30 L/min |
| Ultimate Vacuum | 0.085 mbar |
| External Dimensions | 250 × 135 × 210 mm |
| Weight | 7.5 kg |
| Motor Power | 180 W |
| Diaphragm Material | PTFE-Coated Imported Corrosion-Resistant Elastomer |
| Noise Level | < 50 dB(A) |
| Operating Mode | Continuous Duty (24/7) |
| Pressure Regulation | Adjustable Vacuum Output |
| Dual Function | Vacuum Generation & Positive Pressure (Up to 0 psi gauge) |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer | HUXI Scientific Instrument Co., Ltd. |
| Model | HICE-4 |
| Power Consumption | 250 W |
| Dimensions (W×D×H) | 210 × 280 × 180 mm |
| Temperature Uniformity | ≤ ±0.3 °C |
| Temperature Accuracy | ≤ ±0.5 °C |
| Control Range | −10 to +106 °C |
| Display | 4.3″ capacitive TFT touchscreen |
| Heating Time | ≤15 min (20 °C → 100 °C) |
| Cooling Time | ≤10 min (25 °C → 4 °C) |
| Default Module | 35 × 2.0 mL centrifuge tube block |
| Interface Options | USB (optional), PC communication (optional) |
| Safety Certification | CE-compliant |
| Input Voltage | 100–240 VAC, 50–60 Hz, 1.0 A |
| Fuse | 250 V, 3 A, Φ5 × 20 mm |
| Net Weight | 3.5 kg |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic (China-Made) |
| Model | HJQ-2 |
| Instrument Type | Pneumatic Stirrer |
| Max. Mixing Volume | 30 L |
| Speed Range | 0–3000 rpm |
| Torque | ≤80 N·cm |
| Motor Power | 150 W |
| Operating Air Pressure | 0–6 bar |
| Max. Viscosity Handling | ≤5000 cP |
| Ambient Temp. Range | 5–40 °C |
| Relative Humidity | ≤80% |
| Dimensions (W×D×H) | 315×200×800 mm |
| Net Weight | 9.5 kg |
| Gross Weight | 11.5 kg |
| Standard Impeller | Four-blade stainless steel |
| Clamping Mechanism | Self-locking chuck |
| Vertical Adjustment | Dual-hole square clamp |
| Safety Certification Basis | Spark-free, static-dissipative pneumatic motor design |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model | HL-11KS |
| Instrument Type | Palm-Sized Microcentrifuge |
| Speed Range | High-Speed (10,000–30,000 rpm) |
| Function | General-Purpose Centrifuge |
| Configuration | Fixed-Angle Rotor |
| Separation Class | Biomacromolecules |
| Maximum Capacity | 2 mL per tube |
| Maximum Speed | 11,000 rpm |
| Maximum RCF | 7,100 × g |
| Dimensions (L×W×H) | 175 × 135 × 120 mm |
| Weight | 1.6 kg |
| Power Input | AC 100–240 V, 50/60 Hz |
| Noise Level | ≤45 dB(A) |
| Acceleration Time to 90% Rated Speed | 5 s |
| Deceleration & Lid Opening Time | ≤3 s |
| Rotor Options | 8-position 2.0/1.5 mL fixed-angle rotor |
| Motor Type | Brushless DC Motor |
| Timer Range | 1–99 min (continuous or timed mode) |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Benchtop Centrifuge |
| Speed Range | 300–3000 ±15 rpm |
| Speed Increment | 10 rpm |
| Max. Capacity | 2 × standard 96-well PCR plates or microtiter plates |
| Max. RCF | 608 × g |
| Acceleration Time (0→3000 rpm) | ≤6 s |
| Deceleration Time (3000→0 rpm) | ≤5 s |
| Power Supply | DC 24 V / 2.75 A |
| Input Power | 55 W |
| Motor Type | Brushless DC frequency-controlled motor |
| Display | High-brightness LCD |
| Timer Range | 1 min 1 sec – 99 min 59 sec |
| Dimensions (W×D×H) | 225 × 255 × 215 mm |
| Weight | 3.9 kg |
| Protection Class | IP20 |
| Safety Features | Lid interlock, real-time imbalance detection, overspeed protection, acoustic & visual fault alerts with error code display |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | HL-4K |
| Instrument Type | Palm-Sized Centrifuge |
| Speed Class | Low-Speed Centrifuge (max. 4,000 rpm) |
| Configuration | Fixed-Angle Rotor Centrifuge |
| Separation Target | Biological Macromolecules |
| Max Capacity | 2 mL per tube |
| Max Speed | 4,000 rpm |
| Max RCF | 940 × g |
| Dimensions (L×W×H) | 175 × 135 × 120 mm |
| Weight | 1.4 kg |
| Power Input | AC 100–240 V, 50/60 Hz |
| Rotor Options | 8-position 2.0/1.5 mL rotor |
| Lid Mechanism | Semi-Automatic Lid with Dual-Brake Safety Lock |
| Acceleration Time | ≤5 s to 90% of rated speed |
| Deceleration Time | ≤15 s after lid opening |
| Noise Level | <55 dB(A) |
| Motor Type | Brushless DC Motor |
| Lid Material | Transparent Polycarbonate Sphere |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model | HL-4KS |
| Instrument Type | Palm-Sized Centrifuge |
| Speed Range | 0–4000 rpm |
| Max RCF | 940 × g |
| Max Capacity | 8 × 2.0 mL or 8 × 1.5 mL tubes |
| Rotor Type | Fixed-angle rotor |
| Application Class | Biomolecular separation (e.g., DNA, RNA, proteins, cell pellets) |
| Power Input | AC 100–240 V, 50/60 Hz |
| Noise Level | ≤45 dB(A) |
| Dimensions (W×D×H) | 175 × 135 × 120 mm |
| Weight | 1.5 kg |
| Acceleration Time to 90% Rated Speed | 5 s |
| Deceleration (Braking) Time after Lid Opening | ≤3 s |
| Safety Features | Dual-brake interlock, auto-stop on lid opening, transparent polycarbonate dome lid |
| Motor Type | Brushless DC motor |
| Timer Range | 1–99 min or continuous mode |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model | HL-6KS |
| Instrument Type | Benchtop Palm Centrifuge |
| Speed Range | Up to 6,000 rpm |
| Maximum RCF | 2,100 × g |
| Maximum Capacity | 8 × 2.0 mL or 8 × 1.5 mL tubes |
| Rotor Type | Fixed-angle rotor |
| Application Class | Biomolecular Separation |
| Dimensions (L×W×H) | 175 × 135 × 120 mm |
| Weight | 1.5 kg |
| Power Supply | AC 100–240 V, 50/60 Hz |
| Acceleration Time | ≤5 s to 90% of rated speed |
| Deceleration & Lid Opening | ≤3 s stop time upon lid opening |
| Safety Features | Dual-braking system, automatic rotor lock detection, lid interlock |
| Motor Type | Brushless DC motor |
| Noise Level | <55 dB(A) |
| Timer Range | 1–99 min or continuous mode |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | HL-8KS |
| Instrument Type | Palm-Sized Centrifuge |
| Speed Range | High-Speed (10,000–30,000 rpm) |
| Function | General-Purpose Centrifuge |
| Configuration | Fixed-Angle Rotor Centrifuge |
| Separation Class | Biomolecular Applications |
| Maximum Capacity | 2 mL per tube |
| Maximum Speed | 8,000 rpm |
| Maximum RCF | 3,700 × g |
| Dimensions (W×D×H) | 175 × 135 × 120 mm |
| Weight | 1.6 kg |
| Power Input | AC 100–240 V, 50/60 Hz |
| Noise Level | ≤45 dB(A) |
| Acceleration Time | ≤5 s to 90% of rated speed |
| Deceleration (Lid Opening) | ≤3 s |
| Rotor Compatibility | 8-position 2.0/1.5 mL fixed-angle rotor |
| PCR Rotor Compatibility | 8 × 4 × 0.2 mL strip rotor |
| Rotor Sterilization | Autoclavable |
| Lid Mechanism | Semi-Automatic lid with brake-assisted stop |
| Operating Modes | Continuous or timer-controlled (1–99 min) |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HM-15 |
| Operating Temperature Range | 825 °C |
| Temperature Uniformity | ±25 °C |
| Heating Power | 150 W |
| Internal Chamber Dimensions (W×D×H) | 150 mm |
| Center Zone Max Temp | 825 °C ±50 °C |
| Max Sterilization Outer Diameter | φ14 mm |
| Heating Zone Length | 150 mm |
| Standby Holding Temp | 480 °C |
| Fixed Tilt Angle | 21° |
| Rated Power | 200 W |
| Net Weight | 0.8 kg |
| Gross Weight | 1.3 kg |
| External Dimensions (W×H) | 157×200 mm |
| Packaging Dimensions (L×W×H) | 280×225×200 mm |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HM-24S |
| Sample Capacity | 24 × 2 mL tubes (standard) |
| Grinding Frequency | 0–70 Hz |
| Grinding Time | 0 s–99 min adjustable |
| Noise Level | <55 dB(A) |
| Sample Temperature Control | Compatible with liquid nitrogen pre-cooling |
| Grinding Method | Vertical reciprocating bead-based homogenization (dry, wet, cryogenic) |
| Display | Touchscreen interface |
| Dimensions (L×W×H) | 260 × 380 × 500 mm |
| Weight | 25 kg |
| Max Acceleration | Achieved within 2 s |
| Bead Diameter Range | 0.1–30 mm |
| Bead Material Options | Stainless steel, chrome steel, zirconia, tungsten carbide, quartz sand |
| Chamber Safety Lock | Integrated metal housing with interlocked lid |
| Platform Configuration | Dual grinding platforms (>2 active stations) |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HM-48LS |
| Price | ¥49,400 CNY |
| Throughput | 48 × 2 mL samples in ≤15 s |
| Sample Chamber Temperature Range | 0°C to –50°C |
| Grinding Frequency | 0–70 Hz |
| Noise Level | <55 dB(A) |
| Max Acceleration Time | ≤2 s |
| Grinding Method | Vertical reciprocating bead-beating |
| Display | Touchscreen interface |
| Standard Adapter | 48-position 2 mL PE rack |
| Optional Adapters | 12 × 5 mL, 4 × 10/15/25 mL, 2 × 50 mL |
| Grinding Media Diameter | 0.1–30 mm |
| Compatible Bead Materials | Stainless steel, chromium steel, zirconia, tungsten carbide, quartz sand |
| Final Particle Size | ~5 µm |
| Enclosure Safety Lock | Yes |
| Weight | 50 kg |
| Dimensions (L×W×H) | 700 × 400 × 500 mm |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | HM-80 |
| Price | USD 450 (FOB Shanghai) |
| Operating Temperature Range | 100–300 °C |
| Temperature Control Accuracy | ≤ ±5 °C |
| Heating Power | 120 W |
| Chamber Dimensions (Ø × H) | 40 × 80 mm |
| Glass Bead Capacity | 150 g |
| Warm-up Time | ≤25 min (from ambient to 300 °C) |
| Input Voltage | AC 100–120 V / 220–240 V, 50–60 Hz |
| Net Weight | 1.9 kg |
| Gross Weight | 3.3 kg |
| External Dimensions (L×W×H) | 133 × 130 × 180 mm |
| Packing Dimensions (L×W×H) | 260 × 235 × 320 mm |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HM-LD96S |
| Price | USD 7,400 (approx.) |
| Throughput | 96 × 2 mL samples in ≤15 s |
| Max Frequency | 70 Hz |
| Vertical Stroke | 34 mm |
| Cooling Range | −50 °C to +20 °C |
| Noise Level | <55 dB(A) |
| Display | 5-inch LED touchscreen |
| Sample Tube Compatibility | 2 mL (48-well PE adapter standard), optional 5/10/25/50 mL adapters |
| Grinding Media Diameter | 0.1–30 mm |
| Media Materials | Stainless steel, chromium steel, zirconia, tungsten carbide, quartz |
| Grinding Mode | Vertical bead-based oscillation (dry, wet, cryogenic) |
| Refrigeration Ramp | ~40 min from 20 °C to −50 °C |
| Dimensions (L×W×H) | 450 × 450 × 720 mm |
| Weight | 55 kg |
| Data Storage | ≥20 user-defined protocols with tissue-specific presets (e.g., heart, spleen, lung, kidney, bone, hair) |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Model | HM2-6 |
| Pricing | Available Upon Request |
| Speed Range | 2450–4450 rpm |
| Sample Capacity | 6 × 2 mL tubes |
| Feed Size | Determined by adapter specifications |
| Final Particle Size | ~5 µm |
| Grinding Media Diameter | 0.1–5 mm |
| Acceleration Time | ≤2 s |
| Deceleration Time | ≤2 s |
| Grinding Modes | Wet & Dry |
| Adapter Material | POM or Nylon |
| Safety Features | Lid-Interlocked Emergency Stop |
| Power Supply | AC 100–240 V, 50/60 Hz |
| Dimensions (W×D×H) | 351 × 215 × 202 mm |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer | Yes |
| Country of Origin | China |
| Model | HMC-200 |
| Price | USD 12,000 (FOB Shanghai) |
| Container Capacity | 350 mL × 1 |
| Max. Processing Volume | 175 mL / 200 g (material-dependent) |
| Orbital Speed | 130–2000 rpm |
| Relative Vacuum | −100 kPa (at sea level) |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 1.5 kW |
| Vacuum Pump | ST-type, 0.7 kW, digital vacuum gauge (Panasonic) |
| Control Interface | Touchscreen |
| Preset Programs | 8 groups × 5 segments |
| Transmission | Gear-driven |
| Safety Features | Interlocked door switch, vibration detection, overload protection, vacuum fault monitoring, emergency stop |
| Data Logging | Time-stamped operation logs (parameters, vacuum level, duration) |
| Dimensions (L×W×H) | 585 × 405 × 650 mm |
| Filtration | Removable cylindrical sealed filter cartridge with high gas-permeable surface area |
| Compliance | Designed for GLP-aligned laboratory environments |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer | Yes |
| Country of Origin | China |
| Model | HMD-400 |
| Instrument Type | Vibratory Ball Mill |
| Sample Suitability | Hard, brittle, medium-hard, fibrous, hydrated, elastic, and soft materials |
| Feed Size | ≤ 40 mm |
| Final Particle Size | 5–10 µm (typical) |
| Batch Capacity | < 2 × 50 mL |
| Vibration Speed | 180–2100 rpm |
| Frequency Range | 3–35 Hz |
| Grinding Time Range | 0–8 h 00 min 00 s |
| Power Consumption | 250 W |
| Dimensions (W×H×D) | 400 × 312 × 490 mm |
| Net Weight | ~28 kg |
| Grinding Modes | Dry, Wet, Cryogenic, High-Throughput |
| Jar Quantity | 2 |
| Jar Type | Screw-Cap Vial (Stainless Steel, Tungsten Carbide, Zirconia, PTFE options available) |
| Display | Touchscreen Interface with Program Memory |
| Reproducibility | High inter-batch consistency under controlled parameters |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | HMR-1 |
| Instrument Type | Handheld Tissue Grinder |
| Sample Compatibility | Soft biological tissues |
| Maximum Feed Size | <30 mm |
| Final Particle Size | ≤5 µm |
| Batch Processing Volume | ≤1.5 mL |
| Speed Settings | 3-step adjustable (5,000 / 10,000 / 18,000 rpm) |
| Power Supply | Rechargeable Li-ion battery (4.2 V, 300 mAh) |
| Rated Power | 10 W |
| Chuck Diameter | 3 mm |
| Chuck Depth | 25 mm |
| Device Dimensions | 125 × 16 mm |
| Net Weight | 0.086 kg |
| Charging Time | 60 min (full), 30 min (80%) |
| Battery Life | >60 min per charge |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | HMS-20 |
| Instrument Type | Magnetic Stirrer |
| Max Stirring Volume | 20 L |
| Speed Range | 100–1600 rpm |
| Temperature Control Range | RT+5°C to 100°C |
| Power Supply | 110–220 V AC |
| Timer Range | 0–99 h 59 min |
| Display | LCD (Speed & Time) |
| Speed Adjustment | Continuous Rotary Knob |
| Motor Type | Brushless DC Motor |
| Motor Power | 25 W |
| Housing Material | Stainless Steel |
| Workplate Material | Stainless Steel |
| Operating Ambient Temperature | 5–35°C |
| Operating Ambient Humidity | ≤80% RH |
| Dimensions (W×D×H) | 310 × 250 × 100 mm |
| Packing Dimensions | 425 × 390 × 192 mm |
| Net Weight | 9 kg |
| Gross Weight | 11 kg |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic (China-made) |
| Model | HMS-203D |
| Instrument Type | Heating Magnetic Stirrer |
| Max. Stirring Volume | 3 L |
| Speed Range | 100–2000 rpm |
| Temperature Control Range | RT+5°C to 250°C (plate surface) |
| Temperature Accuracy | ±1°C |
| Speed Accuracy | ±1 rpm |
| Heating Power | 400 W |
| Plate Material | Cast Aluminum with Ceramic Coating |
| Plate Diameter | φ135 mm |
| Compatible Stir Bar Length | 20–45 mm |
| Timer Range | 0–9999 min |
| Operating Ambient | 5–40°C, ≤80% RH |
| Noise Level | ≤45 dB(A) |
| Power Supply | AC 200–240 V, 50 Hz |
| Net Weight | 3.0 kg |
| Dimensions (W×D×H) | 145 × 225 × 103 mm |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | HMS-205D |
| Instrument Type | Heated Magnetic Stirrer |
| Max. Stirring Volume | 20 L |
| Speed Range | 100–2000 rpm |
| Temperature Control Range | RT+5 to 350 °C |
| Heating Power | 550 W |
| Motor Output Power | 15 W |
| Total Power | 600 W |
| Hotplate Diameter | 145 mm |
| Plate Material | Stainless Steel with Ceramic Coating |
| Heating Element | Mica Sheet |
| Motor Type | Brushless DC Motor |
| Display | Backlit LCD |
| Temp. Resolution | 0.1 °C |
| Temp. Setpoint Accuracy | ±0.1 °C |
| Sensor-Based Temp. Accuracy (PT1000) | ±0.2 °C |
| System Temp. Control Accuracy | ±1 °C |
| Over-Temp Protection Threshold | ≤420 °C |
| Timer Range | 0–99 h 59 min |
| Stir Bar Length Compatibility | 20–80 mm |
| Ambient Operating Conditions | 5–40 °C, ≤80% RH |
| Dimensions (W×D×H) | 165 × 280 × 105 mm |
| Net Weight | 4 kg |
| Gross Weight | 5.4 kg |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic (China-made) |
| Model | HMS-208D |
| Instrument Type | Heated Magnetic Stirrer |
| Max. Stirring Volume | 20 L |
| Speed Range | 100–2000 rpm |
| Temperature Control Range | RT+5°C to 400°C |
| Heating Power | 850 W |
| Motor Output Power | 15 W |
| Total Power | 900 W |
| Plate Dimensions | Ø145 mm |
| Plate Material | Aluminum Die-Cast with Ceramic Coating |
| Heating Method | Embedded Heating Element with Mica Insulation |
| External Temperature Sensor | PT1000 |
| Temp. Resolution | 0.1°C |
| Temp. Setting Accuracy | ±0.1°C |
| Temp. Control Accuracy | ±0.2°C (with external probe), ±1.0°C (without probe) |
| Over-Temperature Protection | ≤450°C |
| Timer Range | 1–99 h 59 min |
| Operating Ambient | 5–40°C, ≤80% RH |
| Net Weight | 4 kg |
| Overall Dimensions | 165 × 280 × 105 mm |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic (China-Made) |
| Model | HMS-40 |
| Instrument Type | Magnetic Stirrer |
| Maximum Stirring Volume | 40 L |
| Speed Range | 100–1600 rpm |
| Temperature Control Range | Not Applicable (No Built-in Heating) |
| Power Supply | 110–220 V AC |
| Timer Range | 0–99 h 59 min |
| Display | LCD (Speed & Timer) |
| Speed Adjustment | Analog Knob, Continuously Variable |
| Motor Type | Brushless DC Motor |
| Motor Power | 40 W |
| Housing Material | Enclosed Stainless Steel |
| Workplate Material | Stainless Steel |
| Operating Ambient Temperature | 5–35 °C |
| Operating Ambient Humidity | ≤80% RH (non-condensing) |
| Dimensions (W×D×H) | 440 × 360 × 140 mm |
| Net Weight | 12.5 kg |
| Gross Weight | 14 kg |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Magnetic Stirrer |
| Max Stirring Volume | 10 L × 4 positions |
| Speed Range | 50–2000 rpm |
| Temperature Control Range | RT+5°C to 160°C |
| Temperature Accuracy | ±1°C |
| Heating Plate Surface Temp | ≤320°C |
| Power Supply | AC 220 V, 50/60 Hz |
| Noise Level | ≤27 dB(A) |
| Dimensions (W×D×H) | 713 × 290 × 110 mm |
| Net Weight | 10 kg |