Stresstech Oy
Filter
Showing 1–30 of 93 results
| Brand | Stresstech Oy |
|---|---|
| Origin | Finland |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | GearScan 3 |
| Pricing | Upon Request |
| Brand | Stresstech Oy |
|---|---|
| Origin | Finland |
| Manufacturer Status | Authorized Distributor |
| Origin Category | Imported |
| Model | RollScan 300 |
| Price | Upon Request |
| Power Supply | 90–260 VAC, 49–61 Hz, Single-Phase |
| Inrush Current (Cold Start) | 40 A @ 115 VAC, 80 A @ 230 VAC |
| Power Consumption (Charging Battery) | 150 VA |
| Typical Operating Power | 100 VA |
| Magnetization Frequency Range | 1.0–1000 Hz |
| Magnetization Voltage Range | 0–16 V |
| Signal Analysis Filter Bands | 10–70 kHz, 70–200 kHz, 200–450 kHz |
| Channel Configuration | Single-Channel Standard (Multi-Channel Optional) |
| Sensor Interface | Detachable Pre-Amplified Probes |
| Compatible Materials | Ferritic steels, iron-based alloys, nickel-based superalloys, cobalt-based alloys |
| Signal Processing | Real-Time Digital Signal Processor (DSP) |
| Brand | Stresstech Oy |
|---|---|
| Origin | Finland |
| Manufacturer Authorization Status | Authorized Distributor |
| Origin Category | Imported |
| Model | BearingScan |
| Pricing | Upon Request |
| Brand | Stresstech Oy |
|---|---|
| Origin | Finland |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | BearingScan |
| Pricing | Upon Request |
| Brand | Stresstech Oy |
|---|---|
| Origin | Finland |
| Model | BearingScan400 |
| Type | Electromagnetic Acoustic Transducer (EMAT)-Based Non-Destructive Testing System for Grinding Burn and Heat Treatment Defect Detection |
| Compliance | ISO 17843, ASTM E3296 (under development), GLP-compliant data audit trail capability |
| Brand | Stresstech Oy |
|---|---|
| Origin | Finland |
| Model | Camscan |
| Power Supply | 90–260 VAC, 49–61 Hz |
| Input Current (Cold Start) | 40 A @ 115 VAC / 80 A @ 230 VAC |
| Power Consumption | 100 VA (Normal), 150 VA (Battery Charging) |
| Magnetization Frequency Range | 1.0–1000 Hz |
| Magnetization Voltage | 0–16 V |
| Signal Analysis Bandwidths | 10–70 kHz, 70–200 kHz, 200–450 kHz |
| Channel Configuration | Single-channel (standard), optional multi-channel |
| Enclosure Rating | IP20 |
| Operating Temperature | 0–40 °C |
| Operating & Storage Humidity | 10–90 % RH (non-condensing) |
| Measurement Principle | Magnetic Barkhausen Noise (MBN) |
| Brand | Stresstech Oy |
|---|---|
| Origin | Finland |
| Model | Camscan |
| Power Supply | 90–260 VAC, 49–61 Hz, single-phase |
| Max Inrush Current | 40 A @ 115 VAC / 80 A @ 230 VAC |
| Max Power Consumption (charging) | 150 VA |
| Nominal Power Consumption | ≤100 VA |
| Magnetization Frequency Range | 1.0–1000 Hz |
| Magnetization Voltage | 0–16 V |
| Signal Analysis Bandwidths | 10–70 kHz, 70–200 kHz, 200–450 kHz |
| Channel Configuration | Single-channel (expandable) |
| Probe Compatibility | Interchangeable electromagnetic transducers for cam lobes, journal surfaces, and curved geometries |
| Brand | Stresstech Oy |
|---|---|
| Origin | Finland |
| Model | CamScan |
| Power Supply | 90–260 VAC, 47–63 Hz, single-phase |
| Rated Power | 120 VA |
| Operating Temperature | 10–50 °C (non-condensing) |
| Operating Humidity | 10–90 % RH (non-condensing) |
| Magnetization Frequency Range | Sine wave 1–1000 Hz, Triangle wave 1–150 Hz |
| Demagnetization | Automatic |
| Control Architecture | Industrial PLC + Embedded PC with Real-Time OS |
| Compliance | Designed for ISO 10893-13, ASTM E3022, and EN 10204 Type 3.1 applications |
| Brand | Stresstech Oy |
|---|---|
| Country of Origin | Finland |
| Model | Camscan |
| Magnetization Frequency | Sine Wave 1–1000 Hz / Triangle Wave 1–150 Hz |
| Peak-to-Peak Magnetization Voltage | 0–16 V |
| Demagnetization Analysis Filter Bands | 10–70 kHz, 70–200 kHz, 200–450 kHz |
| Dimensions | 364 W × 156 H × 316 D mm |
| Interface | Ethernet, USB |
| Software | ViewScan Data Acquisition & Visualization Suite |
| Operating Modes | Single-Channel and Multi-Channel Probe Configurations |
| Measurement Time per Location | ~3–5 seconds |
| User Interface | Multilingual (English, German, French, Chinese, Russian) with Password-Protected Access |
| Compliance | Designed for GLP/GMP-aligned NDT workflows |
| Key | Brand: Stresstech Oy |
|---|---|
| Origin | Finland |
| Model | Camscan |
| Power Supply | 90–260 VAC, 49–61 Hz, single-phase |
| Max Inrush Current | 40 A @ 115 VAC / 80 A @ 230 VAC |
| Max Power Consumption (battery charging) | 150 VA |
| Normal Max Power Consumption | 100 VA |
| Magnetization Frequency Range | 1.0–1000 Hz |
| Magnetization Voltage Range | 0–16 V |
| Signal Analysis Filter Bands | 10–70 kHz, 70–200 kHz, 200–450 kHz |
| Channel Configuration | Single-channel (expandable architecture) |
| Compliance | Designed for ISO 20022-1, ASTM E3022, and EN 10204 Type 3.1 documentation support |
| Brand | Stresstech Oy |
|---|---|
| Origin | Finland |
| Model | Camscan |
| Application | Non-Destructive Grinding Burn and Heat Treatment Defect Detection on Rotating Symmetric Components |
| Measurement Principle | X-Ray Diffraction (XRD) Based Residual Stress & Microstructural Change Analysis |
| Compliance | ASTM E915, ISO 21943, EN 15305 |
| Automation Level | Semi-Automatic with Motorized Self-Aligning Sensor Arm |
| Sample Handling | Benchtop or Near-Line Integration for In-Process QC |
| Brand | Stresstech Oy |
|---|---|
| Origin | Finland |
| Model | Camscan |
| Power Supply | 90–260 VAC, 49–61 Hz |
| Input Current (Cold Start) | 40 A @ 115 VAC / 80 A @ 230 VAC |
| Power Consumption | 100 VA (Normal), 150 VA (Battery Charging) |
| Magnetization Frequency Range | 1.0–1000 Hz |
| Magnetization Voltage | 0–16 V |
| Signal Analysis Bandwidths | 10–70 kHz, 70–200 kHz, 200–450 kHz |
| Channel Configuration | Single-channel standard (multi-channel optional) |
| Measurement Time per Lobe | 6–8 seconds |
| Detection Principle | Magnetic Barkhausen Noise (MBN) |
| Compliance | Designed for aerospace NDT per ASTM E1444/E3023, ISO 10893-13, and EN 10228-5 |
| Brand | Stresstech Oy |
|---|---|
| Origin | Finland |
| Model | CamScan1000 |
| Measurement Principle | Magnetic Barkhausen Noise (MBN) |
| Cycle Time | 6–8 seconds per lobe |
| Channel Configuration | Single- or Multi-channel |
| Detection Type | Non-destructive, quantitative surface burn assessment |
| Alarm Threshold | User-definable |
| Compliance | Designed for ISO/IEC 17025-aligned QA environments |
| Application Scope | In-line and off-line camshaft inspection |
| Brand | Stresstech Oy |
|---|---|
| Origin | Finland |
| Model | CamScan200 |
| Measurement Principle | Magnetic Barkhausen Noise (MBN) Analysis |
| Detection Speed | 6–8 seconds per cam lobe |
| Channel Configuration | Single- or multi-channel (up to 4 lobes simultaneously) |
| Output | Quantitative burn severity index, spatial defect localization, user-definable alarm thresholds |
| Compliance | Designed for ISO 17845, ASTM E3019, and EN 10327-based inspection protocols |
| Portability | Benchtop with optional portable probe module |
| Brand | Stresstech Oy |
|---|---|
| Origin | Finland |
| Manufacturer Status | Authorized Distributor |
| Origin Category | Imported |
| Model | CrankScan |
| Pricing | Upon Request |
| Brand | Stresstech Oy |
|---|---|
| Origin | Finland |
| Manufacturer Status | Authorized Distributor |
| Origin Category | Imported |
| Model | CrankScan |
| Pricing | Upon Request |
| Brand | Stresstech Oy |
|---|---|
| Origin | Finland |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | CrankScan |
| Pricing | Upon Request |
| Brand | Stresstech Oy |
|---|---|
| Origin | Finland |
| Model | CrankScan |
| Detection Principle | Magnetic Barkhausen Noise (MBN) |
| Measurement Type | Non-Destructive Surface Integrity Assessment |
| Application Scope | Crankshafts, Camshafts, Gears, Bearings, Fuel Injectors, Piston Rods, Landing Gear Components |
| Probe Configurations | Single-Channel & Multi-Channel Modular Probes (Curved, Contoured, Miniature, High-Resolution) |
| Environmental Rating | IP54 |
| Typical Measurement Time per Location | < 5 Seconds |
| Compliance Framework | ASTM E3029–23 (Standard Guide for MBN Testing of Ferromagnetic Components), ISO 28079:2011 (Non-destructive testing — Magnetic Barkhausen noise testing — General principles), Supports GLP/GMP Audit Trail via Software Logging |
| Brand | Stresstech Oy |
|---|---|
| Origin | Finland |
| Manufacturer | Stresstech Oy |
| Model | CrankScan |
| Detection Principle | Magnetic Barkhausen Noise (MBN) |
| Compliance | ISO 25178-2, ASTM E3069, EN 10327 |
| Portability | Handheld with Integrated Probe & Real-Time Display Unit |
| Data Output | Digital Signal Processing (DSP) with Threshold-Based Alarm Logic |
| Software Platform | Stresstech WinView v5.2 (FDA 21 CFR Part 11 Compliant Audit Trail, GLP/GMP-Ready Export Formats) |
| Brand | Stresstech Oy |
|---|---|
| Origin | Finland |
| Model | CrankScan |
| Measurement Principle | Magnetic Barkhausen Noise (MBN) |
| Channel Options | Single-Channel or Multi-Channel |
| Typical Measurement Time | 6–8 seconds per measurement location |
| Probe Configurations | Interchangeable probes for journal surfaces, flanks, fillets, and complex geometries |
| Environmental Rating | Industrial-grade, operational in harsh workshop conditions |
| Compliance | Designed for ISO 10893-12, ASTM E3071, and EN 10327-compliant non-destructive evaluation workflows |
| Application Scope | Crankshafts, camshafts, bearings, gears, landing gear components, and other ferromagnetic case-hardened or induction-hardened steel parts |
| Brand | Stresstech Oy |
|---|---|
| Origin | Finland |
| Model | CrankScan |
| Detection Principle | Magnetic Barkhausen Noise (MBN) |
| Portability | Handheld / Portable |
| Typical Measurement Time | 6–8 s per inspection zone |
| Channel Configuration | Single- or Multi-channel |
| Probe Options | Interchangeable probes for curved, flat, and contoured surfaces |
| Alarm Thresholding | User-configurable pass/fail limits |
| Data Output | Real-time waveform + RMS/peak amplitude quantification |
| Compliance | Designed for ISO 25178-2, ASTM E3049, and EN 10327-based surface integrity verification protocols |
| Brand | Stresstech Oy |
|---|---|
| Origin | Finland |
| Model | CrankScan |
| Power Supply | 90–260 VAC, 49–61 Hz, single-phase |
| Inrush Current | 40 A @ 115 VAC / 80 A @ 230 VAC (cold start) |
| Nominal Power Consumption | 100 VA (150 VA during battery charging) |
| Magnetization Frequency Range | 1.0–1000 Hz |
| Magnetization Voltage | 0–16 V |
| Signal Analysis Bandwidths | 10–70 kHz, 70–200 kHz, 200–450 kHz |
| Channel Configuration | Single-channel or multi-channel (configurable) |
| Probe Compatibility | Interchangeable probes for journals, fillets, flanks, shoulders, and crank webs |
| Measurement Time per Surface | 6–8 seconds |
| IP Rating | IP20 |
| Operating Temperature | 0–40 °C |
| Relative Humidity | 10–90 % RH (non-condensing) |
| Storage Humidity | 10–90 % RH (non-condensing) |
| Brand | Stresstech Oy |
|---|---|
| Origin | Finland |
| Model | CrankScan200 |
| Detection Principle | Magnetic Barkhausen Noise (MBN) |
| Measurement Type | Non-Destructive, Surface & Near-Surface Integrity Assessment |
| Channel Configuration | Single- or Multi-Channel Probe Support |
| Probe Compatibility | Curved-Surface Optimized Sensors for Journal, Fillet, Flank, and Crankweb Geometry |
| Alarm Thresholding | User-Configurable Signal Amplitude & Statistical Deviation Limits |
| Compliance Framework | Supports ISO 28671 (Non-destructive testing — Magnetic Barkhausen noise testing — General principles), ASTM E3094 (Standard Guide for MBN Testing of Ferromagnetic Materials), and GLP/GMP-aligned data traceability |
| Brand | Stresstech Oy |
|---|---|
| Country of Origin | Finland |
| Model | DR45 |
| Type | Portable X-ray Diffraction (XRD)-Based Residual Stress Analyzer |
| Measurement Principle | Sin²ψ Method with Cr-Kα Radiation |
| Detector | High-Sensitivity Si-PIN or CCD (Configurable) |
| Angular Range | 2θ = 135°–165° (Optimized for Fe, Ni, Ti, Al, and Co-based alloys) |
| Sample Positioning | Motorized XYZ Stage with Manual Fine-Adjustment |
| Data Acquisition Time | < 90 s per measurement point (typical) |
| Stress Resolution | ≤ ±10 MPa (Fe-based steels, under optimal surface condition) |
| Depth Sensitivity | Surface-to-near-surface (~1–20 µm, dependent on material and radiation) |
| Compliance | ASTM E915-22, ISO 21913:2019, EN 15305:2021 |
| Brand | Stresstech Oy |
|---|---|
| Country of Origin | Finland |
| Model | G2 |
| Portability | Field-deployable, integrated water-cooled X-ray generator |
| Safety Compliance | EN 61000-6-4, EN 61000-6-2, IEC 61000-4-3, CE-marked for industrial use |
| Detector Type | High-resolution silicon strip detector (SSD) or CCD-based imaging detector (configurable) |
| X-ray Source | Microfocus tungsten anode tube, 30–50 kV adjustable, <100 µm focal spot |
| Measurement Method | Sin²ψ technique with automated ψ-tilt stage (±45° range) |
| Data Acquisition | Real-time diffraction pattern capture, peak fitting via pseudo-Voigt deconvolution |
| Software Platform | RoboScan™ v5.x with GLP-compliant audit trail and 21 CFR Part 11-ready user access control |
| Brand | Stresstech Oy |
|---|---|
| Origin | Finland |
| Model | Gearscan |
| Measurement Principle | Barkhausen Noise Analysis (BNA) |
| Applicable Gear Types | Spur, Helical, Bevel, and Worm Gears |
| Diameter Range | 5–2000 mm |
| Module Range | 1–70 |
| Measurement Time per Tooth | 2–30 s (dependent on geometry and surface condition) |
| Motion Control | PC-controlled precision DC servo motor with linear-bearing-driven probe |
| Compliance | Designed for ISO 286-1, ASTM E1444/E1444M (magnetic particle testing reference), and compatible with GLP/GMP data integrity requirements |
| Software | GearScan™ v5.x with audit trail, measurement parameter programming, alarm threshold setting, spatial mapping of burn locations, statistical reporting, and CSV/PDF export |
| Brand | Stresstech Oy |
|---|---|
| Origin | Finland |
| Model | GearScan |
| Sensor Types | Multiple options available (surface, contour, bore, extended-reach) |
| Measurement Principle | Magnetic Barkhausen Noise (MBN) Analysis |
| Material Compatibility | Ferritic steels, iron-based alloys, nickel-based superalloys, cobalt-based alloys |
| Power Supply | Rechargeable Li-ion battery (≥20 h continuous operation) |
| Data Storage | 100+ raw waveform datasets with timestamps |
| Software | ViewScan data acquisition & analysis software (optional) |
| Compliance | Designed for ISO 13304-1, ASTM E3085, and industrial NDT QA/QC workflows |
| Enclosure | Ruggedized all-metal housing, IP54-rated |
| Interface | USB-C for PC connectivity, optional printer output |
| Alarm Function | User-definable threshold-based pass/fail indication |
| Display | Integrated high-contrast LCD with real-time voltage/current monitoring, battery status, and menu navigation |
| Brand | Stresstech Oy |
|---|---|
| Origin | Finland |
| Model | GearScan |
| Measurement Principle | Barkhausen Noise Analysis (BNA) |
| Diameter Range | 5–2000 mm |
| Module Range | 1–70 |
| Measurement Time per Tooth | 2–30 s (dependent on geometry and surface condition) |
| Motion Control | Computer-controlled precision DC servo motor with linear-bearing-driven probe |
| Compliance | Designed for ISO 13302, ASTM E2964, and EN 10327-based residual stress and grinding burn assessment workflows |
| Software | RoboScan™ PC-based acquisition and analysis suite with audit trail, user access levels, and GLP/GMP-ready reporting |
| Brand | Stresstech Oy |
|---|---|
| Country of Origin | Finland |
| Model | GearScan |
| Detection Principle | Magnetic Barkhausen Noise (MBN) |
| Channel Configuration | Single- or Multi-Channel |
| Compliance | ISO 28080, ASTM E3071, EN 10326 |
| Software Platform | EasyGear v5.x with Audit Trail & User Access Control |
| Data Output | CSV, XML, PDF Reports |
| Sensor Interface | Plug-and-Play Quick-Connect (DIN 41612) |
| Motion Control | Motorized X/Z Linear Axes + A/T Rotational Axes |
| Safety | Interlocked Sliding Door, Emergency Stop, CE/UKCA Marked Cabinet |
| Brand | Stresstech Oy |
|---|---|
| Origin | Finland |
| Model | GearScan |
| Measurement Principle | Barkhausen Noise Analysis (BNA) |
| Diameter Range | 5–2000 mm |
| Module Range | 1–70 |
| Measurement Time per Tooth | 2–30 s (dependent on gear geometry and surface condition) |
| Motion Control | PC-controlled precision DC servo motor with linear bearing–guided probe |
| Compliance | Designed for ISO 11368, ASTM E1444/E1444M, and EN 10204 Type 3.1 documentation support |
| Software | GearScan Suite v5.x with audit trail, user access levels, and FDA 21 CFR Part 11–ready configuration options |