Chemical Analysis Instruments
Filter
Showing 6931–6960 of 10730 results
| Brand | Pfeiffer Vacuum |
|---|---|
| Origin | Germany |
| Model | OmniStar / ThermoStar |
| Principle | Quadrupole Mass Filter |
| Response Time | ≤2 s |
| Mass Range Options | 1–100 amu, 1–200 amu, 1–300 amu |
| Inlet Capillary Temperature | Up to 350 °C |
| Inlet Material | Stainless Steel (OmniStar) or Fused Silica (ThermoStar) |
| Pumping System | MVP dry diaphragm pump + HiPace turbomolecular pump |
| Software | PV MassSpec (qualitative & quantitative analysis) |
| Brand | Pfeiffer Vacuum |
|---|---|
| Origin | Germany |
| Model | GSD 350 |
| Mass Range | 1–100 / 1–200 / 1–300 amu (selectable) |
| Inlet Type | Heated stainless-steel capillary (OmniStar®) or heated quartz capillary with Pt gasket (ThermoStar®) |
| Capillary Heating Temperature | Up to 350 °C |
| Gas Flow Rate | 1–2 sccm |
| Sample Pressure Range | ≤1000 hPa |
| Detection Limit (C-SEM) | <100 ppb |
| Resolution | 0.5–2.5 amu (at 10% peak height, adjustable) |
| Analysis Speed | Down to 1 ms/amu |
| Dimensions (L×W×H) | 615 × 358 × 274 mm |
| Weight | ~23 kg |
| Power Supply | 85–265 VAC |
| Brand | Pfeiffer Vacuum |
|---|---|
| Origin | Germany |
| Model | HiCube RGA |
| Mass Range | 1–300 u |
| Detection Modes | Faraday (F) and C-SEM/Faraday (M) |
| Minimum Detectable Pressure (M) | 3×10⁻¹⁵ hPa |
| Resolution | <10–50 ppm adjacent peak interference |
| Quadrupole Dimensions | 6 mm Ø × 125 mm |
| Operating Temperature (Analyzer) | ≤200 °C (≤150 °C with SEM) |
| Bakeout Temperature | 300 °C |
| Inlet Flange | DN 40 CF-F |
| Data Acquisition | Ethernet interface |
| Power Supply | 100–240 V AC, 50/60 Hz |
| Weight | 25.5–26.2 kg |
| Turbo Pump | HiCube™ Eco (N₂ speed: 67 L/s |
| power | 170 W) |
| Forevacuum Pump | 1 m³/h at 50 Hz |
| Vacuum Gauge | PKR 361 (range: 1×10⁻⁹ – 1×10³ hPa) |
| Integrated Valve | EVN 116 (adjustable conductance: 5×10⁻⁶ – 3×10³ hPa·L/s) |
| Inlet Port | DN 16 ISO-KF |
| Dwell Time | 1 ms – 16 s/amu |
| Peak Ratio Reproducibility | ±0.5 % |
| Brand | Pfeiffer Vacuum |
|---|---|
| Origin | Germany |
| Model | HiQuad™ |
| Measurement Principle | Quadrupole mass spectrometry with electron ionization (EI), optimized for real-time, high-speed quantitative gas analysis in industrial process environments |
| Mass Range | 1–128 u, 1–300 u, or 1–512 u (configurable per QMA analyzer variant) |
| Minimum Detectable Partial Pressure | 5×10⁻¹⁶ mbar (QMA 410), 2×10⁻¹⁵ mbar (QMA 430), 1×10⁻¹⁵ mbar (Ar, QMA 400) |
| Sensitivity (Faraday, 1 mA emission) | 1×10⁻³ A/mbar (QMA 410), 2×10⁻⁴ A/mbar (QMA 430), 5×10⁻⁴ A/mbar (QMA 400) |
| Max. Operating Pressure (Faraday) | 1×10⁻⁴ mbar |
| Max. Operating Pressure (SEM) | 1×10⁻⁵ mbar |
| Isotopic Ratio Precision (e.g., ⁴⁰Ar/⁴¹Ar) | < 0.3 ppb SEM resolution |
| Analyzer Temperature | 150 °C (operational), 400 °C (bake-out) |
| Scan Speed | up to 125 µs per atomic mass unit |
| Long-Term Stability | < 0.1 % drift over 8 hours |
| Ion Source | Off-axis biased electron impact source with magnetic field enhancement for low background and high signal-to-noise ratio |
| Detector Options | Faraday cup and secondary electron multiplier (SEM) |
| Interface | Integrated OPC UA server and embedded web browser |
| Software | Quadera® platform for real-time data acquisition, matrix-based concentration calculation, and multi-channel calibration |
| Brand | Pfeiffer Vacuum |
|---|---|
| Origin | Germany |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Instrument |
| Model | HPA 220 / SPM 220 |
| Pricing | Upon Request |
| Brand | Pfeiffer Vacuum |
|---|---|
| Origin | Germany |
| Model | MiniTest 300 |
| Weight | 5 kg |
| Minimum Detectable Leak Rate | 5 × 10⁻⁸ Pa·m³/s |
| Maximum Inlet Pressure | 200 hPa (abs.) |
| Operating Temperature | +10 °C to +35 °C |
| Storage Temperature | +10 °C to +55 °C |
| Acoustic Noise Level | < 70 dB(A) |
| Power Supply | 100–240 V, 50/60 Hz |
| Interface Options | RS-485, RJ-25, Gauge, I/O D-sub 9, Remote Control D-sub 9 |
| Wireless Remote Range | up to 100 m (RC 500 optional) |
| Sensor Technology | Quartz Window Mass Filter |
| Warm-up Time to Ready State | ≤ 30 min |
| Display | 3.5-inch LCD |
| Brand | Pfeiffer Vacuum |
|---|---|
| Origin | Germany |
| Model | GSD350 O1 |
| Mass Range | 1–100 amu |
| Maximum Inlet Pressure | 1200 hPa |
| Detection Limit | < 100 ppb |
| Gas Flow Rate | 1–2 sccm (0 °C) |
| Analog Inputs | 5 × (−10 to +10 V, 14/16 bit) |
| Capillary | Stainless Steel, 1 m |
| Inlet Heating Temperature | Up to 200 °C |
| Filament | Dual Iridium with Y₂O₃ coating |
| Brand | Pfeiffer Vacuum |
|---|---|
| Origin | Germany |
| Model | GSD350 O3 |
| Mass Range | 1–100 amu |
| Maximum Inlet Pressure | 1200 hPa |
| Detection Limit | < 100 ppb |
| Gas Flow Rate | 1–2 sccm (at 0 °C) |
| Analog Inputs | 5 × (−10 to +10 V), 14/16 bit |
| Capillary Material | Stainless Steel |
| Capillary Length | 1 m |
| Sample Inlet Heating Temperature | Up to 200 °C |
| Filament Type | Iridium, Dual Y₂O₃-coated |
| Brand | Pfeiffer Vacuum |
|---|---|
| Origin | Germany |
| Model | GSD350 |
| Detection Principle | Quadrupole Mass Spectrometry (QMS) |
| Mass Range | 1–300 u (standard configuration) |
| Detection Limit | < 10⁻¹⁴ mbar (partial pressure, typical) |
| Response Time | < 1 s (for 10–90% step change, with optimized inlet) |
| Operating Pressure Range | 10⁻⁵ – 10⁻³ mbar (ion source) |
| Interface Temperature | Up to 200 °C (heated capillary inlet) |
| Data Acquisition Rate | Up to 100 spectra/s (full scan) |
| Compliance | CE, RoHS, ISO 9001 certified manufacturing |
| Brand | Pfeiffer Vacuum |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | OmniStar® GSD 350 / ThermoStar® GSD 350 |
| Mass Range | 1–100 amu / 1–200 amu / 1–300 amu |
| Inlet Capillary | Stainless Steel (OmniStar®) or Quartz (ThermoStar®) |
| Max Capillary Temp | 350 °C |
| Sample Pressure | up to 1000 hPa (mbar) |
| Gas Flow Rate | 1–2 sccm |
| Detection Limit (C-SEM) | < 100 ppb |
| Resolution (10% valley) | Adjustable 0.5–2.5 amu |
| Dwell Time | 1 ms–16 s/amu |
| Mass Peak Separation (e.g., m/z 40/41) | < 10 ppm / < 20 ppm / < 50 ppm |
| Detector | C-SEM and Faraday |
| Analyzer | PrismaPro® Quadrupole Mass Filter |
| Dimensions (L×W×H) | 615 × 358 × 274 mm |
| Weight | 23 kg |
| Software | PV MassSpec |
| Brand | Pfeiffer Vacuum |
|---|---|
| Origin | Germany |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | OMNISTAR™ / THERMOSTAR™ |
| Pricing | Upon Request |
| Brand | Pfeiffer Vacuum |
|---|---|
| Origin | Germany |
| Model | ThermoStar GSD301 |
| Detection Principle | Quadrupole Mass Spectrometry (QMS) |
| Mass Range | 1–300 u (standard), upgradable to 500 u |
| Detection Limit | <10⁻¹⁴ mbar (partial pressure, typical) |
| Ion Source | Gas-tight dual-filament design |
| Inlet System | Integrated Pt-capillary inlet, max. temp. 350 °C, vacuum-rated to 5×10⁻³ mbar |
| Pumping System | Dual-stage turbomolecular pumping (HiPace 80 + backing pump) |
| Software | QuadStar™ v4.x (supports ASTM E2554, ISO 11348, GLP-compliant audit trail, 21 CFR Part 11 optional modules) |
| Interface Compatibility | Fully compatible with TA Instruments, Mettler Toledo, NETZSCH, SETARAM, PerkinElmer, LINSEIS, Seiko, Micromeritics, Quantachrome TGA/DTA/DSC/adsorption systems |
| Brand | Metrohm Autolab |
|---|---|
| Origin | Netherlands |
| Manufacturer | Metrohm Autolab B.V. |
| Type | Single-Channel Potentiostat/Galvanostat |
| Max Current Output | ±100 mA |
| Current Range | 10 nA – 10 mA (7 decades) |
| Current Resolution | 30 fA (at 10 nA range) |
| Current Accuracy | ±0.2% of reading ± 0.2% of range |
| Potential Range | ±10 V |
| Applied Potential Accuracy | ±2 mV ± 0.2% of setting |
| Potential Resolution | 150 µV (applied), 3–300 µV (measured, selectable) |
| Potentiostat Bandwidth | 1 MHz |
| Rise/Fall Time (1 V step, 10–90%) | < 250 ns |
| Input Impedance | > 100 GΩ |
| Bias Current (25°C) | < 1 pA |
| Coulometric Integrator | Built-in, hardware-based |
| iR Compensation | Positive feedback and current-interrupt modes |
| Electrode Configuration | 2-, 3-, or 4-electrode |
| Analog I/O | 16-bit DAC/ADC, programmable voltage/current control and monitoring |
| Software | NOVA 2.1+ (Windows only) |
| Compliance | CE, RoHS, ISO 9001 certified design |
| Data Integrity | Audit-trail enabled in NOVA for GLP/GMP environments |
| Brand | Phasics |
|---|---|
| Origin | Germany |
| Distributor Type | Authorized Distributor |
| Import Status | Imported |
| Model Series | SID4, SID4-HR |
| Operating Principle | Shack–Hartmann-based wavefront sensing with quadriwave lateral shearing interferometry (QWLSI) |
| Imaging Modality | 3D quantitative phase imaging |
| Deployment | Ground-based and airborne platforms |
| Spectral Range | 400–1100 nm |
| Spectral Resolution | 0.025 nm |
| Spatial Resolution (IFOV) | 29.6 µm |
| Field of View (TFOV) | 5° |
| Frame Rate | Up to 60 fps (SID4), ≥10 fps (SID4-HR) |
| Pixel Array | 160 × 120 (SID4), 400 × 300 (SID4-HR) |
| Dynamic Range | >100 µm (SID4), >500 µm (SID4-HR) |
| Phase Measurement Accuracy | 10 nm RMS (SID4), 15 nm RMS (SID4-HR) |
| Sensitivity | <2 nm RMS (SID4), <2 nm RMS (SID4-HR) |
| Optical Aperture | 3.6 × 4.8 mm² (SID4), 8.9 × 11.8 mm² (SID4-HR) |
| Dimensions | 54 × 46 × 75.3 mm (SID4), 54 × 46 × 79 mm (SID4-HR) |
| Weight | 250 g (both) |
| Brand | Phasics |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | SID4 UV-HR, SID4-UV |
| Price Range | USD 42,000–70,000 (FOB) |
| Operating Principle | Push-broom scanning |
| Imaging Mode | 3D phase-resolved imaging |
| Deployment | Ground-based and airborne platforms |
| Spectral Range | 190–400 nm |
| Spectral Resolution | 0.025 nm |
| Spatial Sampling | 250 × 250 points |
| Total Field of View (TFOV) | 5° |
| Instantaneous Field of View (IFOV) | 29.6 µrad |
| Frame Rate | 30 fps |
| Phase Accuracy | 20 nm RMS (SID4-UV), 10 nm RMS (SID4 UV-HR) |
| Sensitivity | 2 nm RMS @ 250 nm, 2 µJ/cm² (SID4-UV) |
| Dynamic Range | >200 µm |
| Aperture Size | 8.0 × 8.0 mm² (SID4 UV-HR), 7.4 × 7.4 mm² (SID4-UV) |
| Dimensions | 95 × 105 × 84 mm (SID4 UV-HR), 53 × 63 × 83 mm (SID4-UV) |
| Weight | 900 g (SID4 UV-HR), 450 g (SID4-UV) |
| Brand | Phasics |
|---|---|
| Origin | France |
| Model | SID4 |
| Spectral Range | 350–1100 nm |
| Spectral Resolution | 0.025 nm |
| Imaging Resolution | 1280 × 1024 pixels |
| Total Field of View (TFOV) | 5° |
| Instantaneous Field of View (IFOV) | 29.6 µm |
| Frame Rate | 60 fps |
| Phase Measurement Principle | Quadriwave Lateral Shearing Interferometry (QLSI) |
| Operating Mode | Real-time, Onboard (Embedded Processing) |
| Origin | France |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | SID4-HR |
| Pricing | Upon Request |
| Brand | Phasics |
|---|---|
| Origin | France |
| Model | SID4-HR |
| Working Principle | Shack–Hartmann-based wavefront sensing with spatial phase reconstruction |
| Imaging Mode | 3D quantitative phase mapping |
| Platform Compatibility | Ground-based and airborne deployment |
| Spectral Range | 400–1100 nm |
| Spectral Resolution | 0.025 nm (typical for calibrated monochromatic operation) |
| Spatial Resolution | 29.6 µm |
| Field of View (TFOV) | 5° |
| Instantaneous Field of View (IFOV) | 29.6 µrad |
| Frame Rate | 10 fps |
| Pixel Array | 400 × 300 sampling points |
| Dynamic Range | >500 µm PV |
| Phase Accuracy | 15 nm RMS |
| Sensitivity | <2 nm RMS |
| Processing Frequency | 3 Hz (high-resolution mode) |
| Dimensions | 54 × 46 × 79 mm |
| Weight | 250 g |
| Origin | Beijing |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic (China) |
| Model | PhenoTron®-HSI |
| Pricing | Upon Request |
| Operating Principle | Push-broom |
| Imaging Method | Dispersive |
| Deployment Mode | Ground-based |
| Spectral Range | 400–1700 nm |
| Spectral Resolution (FWHM) | 5.5 nm (VNIR), 8 nm (NIR) |
| Spatial Resolution (IFOV) | 1024 px (VNIR), 640 px (NIR) |
| Field of View (TFOV) | 38° |
| Frame Rate | 330 Hz (VNIR), 670 Hz (NIR) |
| Spectral Channels | 224 |
| F-number | F/1.7 |
| Scan Area | ≥300 × 300 mm |
| Platform Height (Standard) | 400 mm |
| Translation Speed | 2–40 mm/s (adjustable, ±1 mm accuracy) |
| Integrated Sensors | Ambient temperature, relative humidity, illuminance, real-time clock |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | PHI 700 SAM |
| Price | Upon Request |
| Detection Limit | 0.1 at.% |
| Minimum Probe Spot Size | 6 nm |
| Information Depth | ≤ 5 nm |
| Elemental Coverage | All elements except H and He |
| Brand | PHI |
|---|---|
| Origin | Japan |
| Model | PHI 700 |
| Type | Scanning Auger Electron Spectrometer |
| Detection Principle | Auger Electron Spectroscopy (AES) |
| Spatial Resolution | <10 nm (beam diameter) |
| Energy Resolution | ≤0.3% at E₀ = 1 keV |
| Ion Sputtering Energy Range | 0.1–5 keV |
| Maximum Magnification | >500,000× |
| Depth Profiling Capability | Sub-nanometer to several micrometers |
| Sample Stage | High-precision motorized XYZ + tilt/rotation |
| Vacuum System | Ultra-high vacuum (UHV), base pressure ≤2×10⁻¹⁰ Torr |
| Brand | PHI |
|---|---|
| Origin | Japan |
| Model | PHI 700 |
| Type | Scanning Auger Electron Spectrometer |
| Detection Principle | Auger Electron Spectroscopy (AES) |
| Spatial Resolution | <10 nm (typical) |
| Beam Energy Range | 1–20 keV (electron gun) |
| Depth Profiling Capability | Sub-nanometer to several micrometers |
| Energy Resolution | ≤0.3% (ΔE/E at E = 1 keV) |
| Imaging Magnification | Up to 500,000× |
| Vacuum System | Ultra-High Vacuum (UHV), ≤5×10⁻¹⁰ Torr base pressure |
| Sample Stage | High-precision motorized XYZ + tilt/rotation |
| Compliance | ASTM E1508, ISO 18115-2, USP <1057>, GLP/GMP-ready data audit trail |
| Brand | ULVAC-PHI |
|---|---|
| Origin | Japan |
| Model | PHI ADEPT-1010 |
| Instrument Type | Quadrupole |
| Primary Beam Energy Range | 0.25–11 keV |
| Mass Range | 1–340 amu |
| Distribution Status | Authorized Distributor (Imported) |
| Brand | ULVAC-PHI |
|---|---|
| Origin | Japan |
| Model | PHI GENESIS 500 |
| Category | Imported Instrument |
| Distribution Status | Authorized Distributor |
| Pricing | Upon Request |
| Brand | PHI |
|---|---|
| Origin | Japan |
| Model | Genesis 500 |
| Type | Fully Automated Scanning Focused XPS System |
| Sample Stage | Motorized 3-Position Carousel (80 mm × 80 mm trays) |
| Microprobe Spot Size | ≤ 5 µm |
| Depth Profiling | Integrated High-Performance Ar⁺ Ion Gun + Dual-Beam Charge Neutralization |
| Optional Techniques | UPS, LEIPS, REELS, AES, HAXPES, GCIB Sputtering |
| Software Platform | PHI SmartSoft Suite with GLP/GMP-Compliant Audit Trail & 21 CFR Part 11 Support |
| Compliance | ASTM E1521, ISO 18118, ISO 21365, USP <1057>, IEC 62304 |
| Brand | PHI |
|---|---|
| Origin | Japan |
| Model | oTOF 3 |
| Instrument Type | Time-of-Flight (TOF) |
| Primary Beam Energy | 30 kV |
| Mass Range | 15,000 u |
| Mass Resolution | 13,500 |
| Configuration | Parallel Imaging MS/MS |
| Charge Neutralization | Dual-beam (low-energy electrons + low-energy inert gas ions), self-regulating, position-resolved |
| Optional Features | Dual-cluster ion source, sub-500 nm HR2 chemical imaging, DE-free acquisition mode, high beam current HR2 imaging, large angular acceptance & depth of field |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | PHI Quantera SXM |
| Price | USD 900,000 |
| Vacuum Base Pressure | <5×10⁻¹⁰ Torr |
| Ag 3d₅/₂ FWHM Energy Resolution | <0.50 eV |
| PET C1s (O=C–O) FWHM Energy Resolution | <0.85 eV |
| Minimum Monochromated X-ray Spot Size | 9.0 µm (X) × 9.0 µm (Y) |
| Typical X-ray Spot Sizes | 10.0 µm @ ≤1.25 W |
| XPS Sensitivity | >125 kcps @ 20.0 µm, <1.00 eV resolution |
| Ion Gun Max Current | >5.0 µA at 5 kV |
| Ion Sputtering Pressure | <5×10⁻⁸ Torr during operation |
| Analysis Chamber Material | UHV-compatible stainless steel |
| Ion Pump Speed | 360 L/s (with Ti sublimation pump) |
| Software | MultiPeak™, CasaXPS-compatible data processing suite (peak fitting, least-squares deconvolution, multivariate analysis, chemical-state imaging, line scan extraction, depth profile quantification) |
| Brand | PHI (Physical Electronics) |
|---|---|
| Model | TRIFT™ |
| Origin | Japan |
| Instrument Type | Time-of-Flight Secondary Ion Mass Spectrometry (TOF-SIMS) |
| Mass Analyzer | Triple-Focusing Reflectron TOF |
| Spatial Resolution | ≤ 100 nm (typical, dependent on primary ion source and sample conditions) |
| Imaging Modes | 256 × 256, 512 × 512, 1024 × 1024 pixel formats |
| Depth Profiling | Sputter-driven sequential layer removal with synchronized mass spectral acquisition |
| 3D Reconstruction | Voxel-based data integration from depth-resolved imaging stacks |
| Sample Stage Temperature Range | –150 °C to +200 °C (LN₂ cooling + resistive heating) |
| Sample Mounting Options | Back-mount (25 mm diameter), front-mount (100 mm × 100 mm planar support) |
| Compliance | Designed for GLP/GMP-aligned workflows |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | VersaProbe III |
| Price | USD 950,000 (FOB Yokohama) |
| Brand | ISOTOPX |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Phoenix |
| Instrument Type | Thermal Ionization Mass Spectrometer (TIMS) |
| Resolution | >450 |
| Dynamic Range (ATONA Amplifier) | 100 V |
| Mass Drift | <20 ppm over 40 min |
| Faraday Cup Lifetime | ≥10 years (Phoenix X62) |
| Vacuum Pumping Speed | Highest among commercial TIMS systems |
| Sample Capacity | 20-position rotatable carousel orthogonal to ion beam axis |
| Optional Detectors | Daly detector, Secondary Electron Multiplier (SEM), Multi-Collector Ion Counter with Conversion Dynode technology |
| Optional WARP Retarding Field Filter | Enables abundance sensitivity <1×10⁻⁸ for ²³⁷U/²³⁸U |
| Ion Extraction Slit | Enlarged for enhanced sensitivity |
| Focal Plane Rotation | Motorized, orthogonal to ion trajectory |
| Sample Chamber | Stainless steel with multiple auxiliary ports (pre-heating, cryo-trap, oxygen inlet) |
| Software | Fully integrated, GLP-compliant, remote operation enabled |
| Regulatory Compliance | Designed to support 21 CFR Part 11 audit trails, ISO/IEC 17025 data integrity requirements, and ASTM D7938 (TIMS-based isotope ratio analysis) |