Common Laboratory Equipment
Filter
Showing 6721–6750 of 18046 results
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-2542 |
| Flow Rate | 0.15–9 mL/min |
| Speed Range | 100–6000 rpm |
| Precision (CV) | <1% |
| Displacement | 1.5 µL |
| Minimum Dose | 0.25 µL |
| Max Differential Pressure | 1.5 bar |
| Max Inlet Pressure | 1 bar |
| Operating Temperature | −20 to +60 °C |
| Motor | 24 V DC, 4.5 W, integrated 32-pulse magnetic encoder |
| Dimensions (L × Ø) | 90 mm × 16 mm |
| Weight | 70 g |
| Wetted Materials | Alloy C22 (2.4602), Alloy C276, ZrO₂ ceramic, WC, PEEK™, FFPM, graphite-reinforced PTFE |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | mzr-2905 |
| Drive Type | Electric DC Servo Motor |
| Speed Range | 0–300 rpm |
| Flow Rate | 1 µL/h – 1.1 L/h |
| Pressure Capability | Up to 150 bar |
| Viscosity Range | 0.3 – 1,000,000 mPa·s |
| Material Construction | Tungsten Carbide & Ceramic Components |
| Inlet/Outlet Ports | Standardized 1/4″–28 UNF, 1/8″ NPT, or 3/8″ NPT |
| Optional Modules | Fluid Sealing, Heating (up to 150 °C), Thermal Insulation (−20 °C to +200 °C), Gear Reduction, ATEX-certified Explosion-Proof Version |
| Compliance | Designed for GLP/GMP-aligned workflows |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-2905 |
| Flow Rate Range | 0.003–18 mL/min |
| Speed Range | 1–6000 rpm |
| Precision (CV) | <1% |
| Viscosity Range | 0.3–50,000 mPa·s |
| Pressure Differential | up to 30 bar (oil, 16 mPa·s) |
| Displacement per Revolution | 3 µL |
| Minimum Dose | 0.5 µL |
| Wetted Materials | SS 316L, tungsten carbide, graphite-reinforced PTFE, FPM seals |
| Motor | 24 V DC servo motor, 44 W |
| Controller | Integrated 16-bit microcontroller |
| Interfaces | 0–10 V analog, RS-232, 1 digital I/O |
| Dimensions (L×W×H) | 140 × 45 × 65 mm |
| Weight | ~780 g |
| Operating Temperature | –5 to +60 °C (optional –20 to +150 °C) |
| Fluid Connections | 1/4"–28 UNF front port |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-2909 Ex |
| Flow Rate | 0.003–14 mL/min |
| Speed Range | 1–4700 rpm |
| Precision (CV) | < 1 % |
| Viscosity Range | 0.3–5000 mPa·s |
| Displacement | 3 µL |
| Minimum Dose | 0.5 µL |
| Max. Differential Pressure | 4 bar (at 1 mPa·s), 5 bar (≥16 mPa·s) |
| Max. Inlet Pressure | 5 bar (10 bar with optional fluid seal module) |
| Wetted Materials | SS 316L (1.4404/1.4435), tungsten carbide, Ni-based alloys |
| Shaft Seal | graphite-reinforced PTFE + SS 316L |
| Static Seals | FPM (standard), EPDM/FFPM optional |
| Motor | 24 V DC, 2 A, 53 W, encoder 500 ppr (HEDL 5540) |
| Cable Length | 10 m |
| Weight | ~2700 g |
| ATEX Certification | II 2G c T5 X |
| Hazardous Area Classification | Zone 1 & 2 |
| Operating Temperature | −5 to +40 °C |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-2921 |
| Flow Rate | 0.3–18 mL/min |
| Speed Range | 100–6000 rpm |
| Precision (CV) | <1% |
| Displacement | 3 µL |
| Minimum Dose | 0.5 µL |
| Max Differential Pressure | 3 bar |
| Inlet Pressure Limit | 1 bar |
| Operating Temperature | −20 to +60 °C |
| Weight | ~56 g |
| Motor | Brushed DC, 18 V, Hall-effect encoder (16 pulses/rev) |
| Communication | RS-232, CANopen (DSP 301/DSP 402) |
| Wetted Materials | SS 316L, ceramic, tungsten carbide, nickel-based alloy, epoxy |
| Shaft Seal | graphite-reinforced PTFE/SS 316L |
| Static Seals | FPM (optional EPDM/FFPM) |
| Tubing Connection | 2 mm OD slip-fit (optional manifold M2.1) |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | mzr-2921 |
| Drive Type | Electric |
| Flow Range | 1 µL/h to 1 L/min |
| Accuracy | ±1% of set volume |
| Flush Rate | 40 mL/min |
| Application Pressure Class | Low-pressure (≤ 2 bar) |
| Fluid Compatibility | Low-viscosity liquids (e.g., deionized water, aqueous solutions, methanol, organic solvents, oils, lubricants) |
| Pump Type | Micro gear metering pump |
| Dimensions | Compact, OEM-integrated design |
| Compliance | CE, RoHS, ISO 9001-manufactured |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-4605 |
| Flow Rate Range | 0.012–72 mL/min |
| Viscosity Range | 0.3–50,000 mPa·s |
| Precision (CV) | <1% |
| Speed Range | 1–6000 rpm |
| Displacement per Revolution | 12 µL |
| Minimum Dose Volume | 2 µL |
| Pressure Differential | 0–10 bar (water, 1 mPa·s), up to 50 bar (oil, 16 mPa·s) |
| Max. Inlet Pressure | 5 bar (10–40 bar with optional configuration) |
| Fluid Path Materials | SS 316L (1.4404 / 1.4435), tungsten carbide, Ni-based alloys |
| Seals | Graphite-reinforced PTFE, FPM (standard), EPDM/FFPM (optional) |
| Motor | 24 V DC servo motor, 44 W |
| Controller | Integrated 16-bit microcontroller |
| Interfaces | 0–10 V analog, RS-232, 1 digital I/O |
| Dimensions (L×W×H) | 143 × 45 × 65 mm |
| Weight | ~800 g |
| Operating Temperature | −5 to +60 °C (−20 to +150 °C with optional configuration) |
| Connection | Frontal 1/4″–28 UNF |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | mzr-4605 |
| Drive Type | Electric |
| Speed Range | 0–300 rpm |
| Flow Rate | 1 µL/h – 1.1 L/h |
| Dimensions (L) | 143 mm |
| Viscosity Range | Compatible with methanol, water, solvents, adhesives, oils, gels |
| Technology | Rotating micro annular gear |
| Pulse Dampening | Low-pulsation delivery |
| Shear Stress | Low-shear transport |
| Optional Modules | Thermal insulation kit, fluid-sealed air/moisture barrier, electric heating module (up to 150 °C), dual-shell temperature control (–20 °C to +150 °C), torque reducer, mzr-S05/S05E control console |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-4609 Ex |
| Flow Rate | 0.012–56 mL/min |
| Speed Range | 1–4700 rpm |
| Viscosity Range | 0.3–5,000 mPa·s |
| Precision (CV) | <1% |
| Max Differential Pressure | 0–10 bar (≥16 mPa·s) |
| Inlet Pressure Max | 5 bar (10 bar with optional fluid seal module) |
| Displacement per Revolution | 12 µL |
| Minimum Dose Volume | 2 µL |
| Motor | 24 V DC, 53 W, encoder resolution 500 pulses/rev |
| Wetted Materials | SS 316L (1.4404/1.4435), tungsten carbide, Ni-based alloys |
| Shaft Seal | graphite-reinforced PTFE + SS 316L |
| Static Seals | FPM (standard), EPDM/FFPM optional |
| Enclosure Rating | ATEX II 2G c T5 X |
| Operating Temperature | −5 to +40 °C |
| Ambient Temperature | 0 to +40 °C |
| Weight | ~2700 g |
| Cable Length | 10 m |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Drive Type | Electric |
| Flow Range | 1 µL/h to 1 L/min |
| Pump Type | Positive Displacement Micro-Gear Pump |
| Compliance | CE, RoHS, ISO 9001 Certified |
| Construction | Chemically Resistant Stainless Steel & Ceramic Gears |
| Temperature Control | Integrated Heating Option (up to 120 °C) |
| Accuracy | ±1 % of set flow rate (typical, under calibrated conditions) |
| Repeatability | ≤0.5 % RSD |
| Viscosity Range | Up to 100,000 mPa·s |
| Materials Compatibility | Compatible with aqueous, organic, and highly viscous media including polymer melts and microencapsulation formulations |
| Brand | HNPM |
|---|---|
| Origin | UK |
| Model | MZR-6355 |
| Flow Rate | 0.024–144 mL/min |
| Speed Range | 1–6000 rpm |
| Precision | CV < 1% |
| Max Pressure | 80 bar |
| Displacement | 24 µL |
| Min Dose | 15 µL |
| Dimensions | 146 × 70 × 72 mm |
| Weight | ~1650 g |
| Operating Temp | −5 to +60 °C (−20 to +150 °C with optional thermal module) |
| Wetted Materials | Alloy C22 (DIN 2.4602), SSiC, Al₂O₃, ZrO₂, FFKM (Kalrez® 6375) |
| Motor | 24 V DC, 44 W, Brushless DC Servo with Encoder & Microcontroller |
| Interfaces | 0–10 V, 0(4)–20 mA, RS-232, 1x Digital I/O, Optional CAN Bus |
| Drive | 8-pole NdFeB Magnetic Coupling |
| Viscosity Range | 0.3–1000 mPa·s |
| Fluid Connection | 1/8" NPT Female |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Drive Type | Electric |
| Max. Speed | 6000 rpm |
| Flow Rate Range | 0–100 mL/min |
| Dimensions | Compact cylindrical design (typical for mzr-series: ~90 mm length, Ø16 mm) |
| Materials Options | ZrO₂ ceramic or tungsten carbide rotors |
| Compliance | Designed for GLP/GMP-adjacent lab environments |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | mzr-6355 |
| Drive Type | Electric DC Servo Motor (24 V DC, 44 W) |
| Speed Range | 1–6000 rpm |
| Flow Rate | 1 μL/h – 1.1 L/h (0.024–144 mL/min) |
| Pressure Rating | Up to 80 bar (1160 psi) |
| Precision | CV < 1% |
| Viscosity Range | 0.3–1000 mPa·s |
| Displacement Volume | 24 μL/rev |
| Minimum Dose | 15 μL |
| Wetted Materials | Alloy C22 (2.4602), SSiC, Al₂O₃, ZrO₂, FFKM (Kalrez® 6375) |
| Fluid Connections | 1/8" NPT internal thread |
| Dimensions (L×W×H) | 146 × 70 × 72 mm |
| Weight | ~1650 g |
| Operating Temperature | −5 to +60 °C (−20 to +150 °C with optional thermal module) |
| Torque Transmission | 8-pole NdFeB magnetic coupling |
| Interface Options | 0–10 V analog, 0(4)–20 mA, RS-232, 1 digital I/O, optional CAN bus |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-6359 Ex |
| Flow Rate | 0.024–112 mL/min |
| Speed Range | 1–4700 rpm |
| Max Differential Pressure | 0–40 bar (at η > 16 mPa·s) |
| Precision | CV < 1% |
| Motor | 24 V DC, 53 W, encoder 500 ppr |
| Explosion Protection | ATEX II 2G IIC c T4 X |
| Wetted Materials | Alloy C22 (DIN 2.4602), SSiC, Al₂O₃, ZrO₂, FFKM (Kalrez® 6375) |
| Connection | 1/8" NPT internal thread |
| Weight | ~4900 g |
| Dimensions | 280 mm (L) |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-7205 |
| Flow Rate | 0.048–288 mL/min |
| Pressure Range | 0–30 bar (at 1 mPa·s), up to 40 bar (≥16 mPa·s) |
| Viscosity Range | 0.3–50,000 mPa·s (up to 1,000,000 mPa·s with optional configuration) |
| Precision | CV < 1% |
| Speed Range | 1–6000 rpm |
| Displacement | 48 µL |
| Minimum Dose | 30 µL |
| Wetted Materials | SS 316L, tungsten carbide, Ni-based alloy, graphite-reinforced PTFE, FPM (FKM) |
| Motor | 24 V DC servo motor, 44 W |
| Controller | Integrated 16-bit microcontroller |
| Interfaces | 0–10 V analog, RS-232, 1 digital I/O |
| Dimensions (L×W×H) | 155 × 50 × 69 mm |
| Weight | ~1080 g |
| Operating Temperature | −5 to +60 °C (−20 to +150 °C with optional configuration) |
| Inlet Pressure Max | 5 bar (10–40 bar with custom setup) |
| Fluid Connections | 1/8" NPT female (standard), lateral option available |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-7208 |
| Flow Rate | 0.048–288 mL/min |
| Precision (CV) | <1% |
| Viscosity Range | 0.3–50,000 mPa·s (up to 1,000,000 mPa·s with customization) |
| Speed Range | 1–6000 rpm |
| Max Differential Pressure | 30 bar (at 1 mPa·s), 150 bar (≥16 mPa·s) |
| Max Inlet Pressure | 5 bar (10–40 bar optional) |
| Displacement Volume | 48 µL |
| Minimum Dose | 30 µL |
| Wetted Materials | SS 316L, tungsten carbide, Ni-based alloys, graphite-reinforced PTFE, FPM/EPDM/FFPM seals |
| Motor | Brushless DC servo, 36 V DC, 201 W, IP54, 192 mNm continuous torque |
| Encoder | 500 pulses/rev (HEDL 5640) |
| Dimensions (L×W×H) | 211×84×93 mm |
| Weight | ~1500 g |
| Operating Temperature | −5 to +60 °C (−20 to +150 °C with optional configuration) |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-7208X1 |
| Flow Rate | 0.048–288 mL/min |
| Viscosity Range | 0.3–50,000 mPa·s (up to 1,000,000 mPa·s with optional configuration) |
| Precision (CV) | <1% |
| Speed Range | 1–6000 rpm |
| Displacement | 48 µL |
| Minimum Dose | 30 µL |
| Pressure Differential | 0–30 bar (at 1 mPa·s), up to 120 bar (≥16 mPa·s) |
| Max. Inlet Pressure | 5 bar (10–40 bar optional) |
| Wetted Materials | SS 316L, tungsten carbide, Ni-based alloys |
| Shaft Seal | graphite-reinforced PTFE + SS 316L |
| Static Seals | FPM (standard), EPDM/FFPM optional |
| Motor | Brushless DC servo, 36 V DC, 201 W, IP54, 192 mNm continuous torque |
| Encoder | 1000 pulses/rev, analog Hall sensor |
| Dimensions (L×W×H) | 211 × 84 × 93 mm |
| Weight | ~1500 g |
| Operating Temperature | −5 to +60 °C (−20 to +150 °C with optional configuration) |
| Fluid Connections | 1/8" NPT internal thread (lateral option available) |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-7209 Ex |
| Flow Rate | 0.048 – 225 mL/min |
| Speed Range | 1 – 4700 rpm |
| Precision (CV) | < 1 % |
| Viscosity Range | 0.3 – 5,000 mPa·s |
| Max Differential Pressure | 30 bar (at 1 mPa·s), 40 bar (≥16 mPa·s) |
| Max Inlet Pressure | 5 bar (10 bar with optional fluid seal module) |
| Displacement per Revolution | 48 µL |
| Minimum Dose Volume | 30 µL |
| Motor | 24 V DC, 2 A, 53 W, Encoder Resolution: 500 pulses/rev |
| Wetted Materials | SS 316L (1.4404 / 1.4435), Tungsten Carbide, Ni-based alloys |
| Shaft Seal | Graphite-reinforced PTFE + SS 316L |
| Static Seals | FPM (Viton), optional EPDM or FFPM |
| Enclosure Rating | ATEX II 2G c T4 X |
| Ambient Temp | 0 – 40 °C |
| Operating Temp | −5 – +40 °C |
| Weight | ~2700 g |
| Cable Length | 10 m |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-7255 |
| Flow Rate | 0.048–288 mL/min |
| Viscosity Range | 0.3–1,000 mPa·s |
| Precision | CV < 1% |
| Speed Range | 1–6,000 rpm |
| Max Pressure | 80 bar |
| Displacement | 48 µL |
| Minimum Dose | 30 µL |
| Wetted Materials | Alloy C22 (2.4602), SSiC, Al₂O₃, ZrO₂, FFKM (Kalrez® Spectrum™ 6375) |
| Motor | 24 V DC, 44 W DC Servo with Encoder & Microcontroller |
| Interface | 0–10 V, 0(4)–20 mA, RS-232, 1x Digital I/O, Optional CAN Bus |
| Dimensions (L×W×H) | 146 × 70 × 72 mm |
| Weight | ~1,650 g |
| Operating Temp | −5 to +60 °C (−20 to +100 °C with optional thermal control) |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-7259 Ex |
| Explosion Protection | ATEX II 2G IIC c T4 X |
| Flow Rate | 0.048–225 mL/min |
| Precision (CV) | <1% |
| Viscosity Range | 0.3–100 mPa·s |
| Max Differential Pressure | 40 bar (at >16 mPa·s) |
| Max System Pressure | 80 bar |
| Displacement per Revolution | 48 µL |
| Minimum Dose | 30 µL |
| Motor | 24 V DC, 53 W, 500 PPR Encoder |
| Ambient Temp | 0–40 °C |
| Fluid Temp | −5–+60 °C (−20–+100 °C with optional thermal isolation module) |
| Wetted Materials | Alloy C22 (DIN 2.4602), SSiC, Al₂O₃, ZrO₂, FFKM (Kalrez® 6375) |
| Connection | 1/8" NPT internal thread |
| Weight | ~4900 g |
| Dimensions (L×W×H) | 280 × 120 × 140 mm |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | mzr-pump |
| Drive | Electric |
| Speed Range | 0–300 rpm |
| Flow Rate | 1 µL/h – 1.1 L/h |
| Pressure Capability | Up to 150 bar |
| Viscosity Range | 0.3 – 1,000,000 mPa·s |
| Pulse Level | <1% (RMS) |
| Dead Volume | <1 µL |
| Materials | Chemically resistant stainless steel, ceramic, PTFE, sapphire |
| Explosion-Proof Options | Available (ATEX/IECEx compliant) |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Drive Type | Electric |
| Speed Range | 0–300 rpm |
| Flow Rate | 1 µL/h – 1.1 L/h |
| Materials | SiC bearings, Hastelloy C-22 (2.4602) housing, ZrO₂/Al₂O₃ or WC-Co rotors |
| Max Pressure | 150 bar |
| Viscosity Range | 0.3 – 1,000,000 mPa·s |
| Compliance | FDA-compliant wetted materials available, ATEX-certified variants (II 2G Ex db IIB T4 Gb / II 2D Ex tb IIIB T135°C Db) |
| Brand | Hogon |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model Series | HG-10-4 |
| Instrument Type | Box-Type Muffle Furnace |
| Maximum Temperature | 1000 °C |
| Temperature Control Accuracy | ±3 °C |
| Rated Power | 3500 W |
| Heating Rate to Max Temp | ≤10 min |
| Heating Method | Kanthal® Resistance Wire Elements |
| Internal Chamber Dimensions | 510 × 400 × 530 mm |
| Voltage | 220 V / 50 Hz (Standard Variant) |
| Weight | 30 kg |
| Brand | HOGON |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | HGC-8 |
| Automation Level | Semi-Automatic |
| Number of Channels | 8 |
| Extraction Format | Cartridge-Based SPE |
| Flow Rate Control Range | 0.1–9.9 mL/min |
| Solvent Compatibility | Broad (Customizable Selection) |
| Sample Capacity | 8 Samples per Run |
| Sample Loading Volume | User-Defined |
| Wetted Materials | PTFE (Polytetrafluoroethylene) |
| Power Supply | 220 V / 50 Hz |
| Rated Power | 150 W |
| Maximum Timer Setting | 99 min 59 sec |
| Pump Speed Range | 0.1–100 rpm |
| Flow Accuracy Linearity | High Reproducibility Across Speed–Flow Curve |
| Weight | 12 kg |
| Brand | HOGON |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic (PRC-Made) |
| Model | HGC-96A |
| Heating Method | Dry-Block Heating |
| Temperature Range | Ambient to 150 °C |
| Temperature Uniformity | ±1 °C |
| Sample Tube Diameters Supported | 15 mm, 17 mm, 21 mm (custom bore diameters available upon request) |
| Gas Flow Rate | 0–100 L/min |
| Throughput Capacity | 12 / 24 / 48 / 96 positions |
| Heating Power | 500 W |
| Brand | HOGON |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | HUP I (Basic Edition) |
| Pure Water Grade | ASTM Type I / ISO 3696 Grade 1 |
| Resistivity | 18.2 MΩ·cm @ 25 °C |
| Heavy Metals & Soluble Silica | <0.1 ppb |
| Total Organic Carbon (TOC) | <10 ppb |
| Microbial Count | <0.001 EU/mL |
| Particles (>0.1 � | m): <1 particles/mL |
| Flow Rate | 15 L/h (at 25 °C) |
| UV Wavelengths | 254 nm & 185 nm (optional) |
| UF Cutoff | 5000 Da (optional) |
| Terminal Filtration | 0.2 μm hydrophilic membrane |
| Power Supply | 220 V / 50 Hz |
| Dimensions (H×W×D) | 320 × 450 × 540 mm |
| Weight | 25 kg |
| Brand | HOGON |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | HUP-1 / HUP-2 |
| Price | USD 2,200 (approx.) |
| Pure Water Grade | ASTM Type I / ISO 3696 Grade 1 |
| Resistivity | 18.2 MΩ·cm @ 25 °C |
| Heavy Metals & Soluble Silica | < 0.1 ppb |
| Total Organic Carbon (TOC) | < 5 ppb (HUP-2), < 10 ppb (HUP-1) |
| Microbial Count | < 1 CFU/mL |
| Endotoxin | < 0.001 EU/mL |
| Particles (>0.1 µm) | < 1 particles/mL |
| Flow Rate | 30 L/h (HUP-2), 15 L/h (HUP-1) |
| Instant Dispense | 1.8 L/min |
| UV Wavelengths | 185 nm + 254 nm (HUP-2 only) |
| Integrated UF Membrane | Yes (HUP-2) |
| Dimensions | 32 × 45 × 54 cm |
| Weight | 25 kg |
| Power Supply | 220 V, 50 Hz |
| Brand | HOGON |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | HUP Series |
| Purified Water Grade | Type I Ultrapure Water |
| Resistivity | 18.2 MΩ·cm @ 25 °C |
| Heavy Metals & Soluble Silica | <0.1 ppb |
| Total Organic Carbon (TOC) | <5 ppb |
| Microbial Count / Endotoxins | <0.001 EU/mL |
| Particles (>0.1 � | m): <1 particles/mL |
| Brand | HOGON |
|---|---|
| Origin | Shanghai, China |
| Manufacturer | HOGON Scientific Instrument Co., Ltd. |
| Type | Stomacher-type |
| Model | SH-400A |
| Dimensions (W×D×H) | 380 × 220 × 330 mm |
| Weight | 22 kg |
| Power Supply | 220 V / 50 Hz |
| Operating Temperature Range | 0–35 °C |
| Sample Volume Capacity | 3–400 mL |
| Homogenization Time Range | 1 s – 100 min or continuous mode (3 programmable time presets) |
| Pulsation Frequency | 3–12 strokes/sec (3 programmable speed presets) |
| Adjustable Stroke Distance | 0–30 mm |
| Sterile Bag Dimensions | 17 × 30 cm |
| Bag Packaging | 100 pcs per pack |
| Brand | New Biolink |
|---|---|
| Origin | Beijing, China |
| Model | Hollow Fiber Membrane |
| Membrane Material | Polyvinylidene Fluoride (PVDF) |
| Manufacturing Process | Thermally Induced Phase Separation (TIPS) |
| Configuration Options | Pressure-Driven, Submerged, and MBR Curtain-Type Modules |
| Chemical Resistance | pH 2–12, Oxidant-Tolerant (up to 50 ppm NaOCl) |
| Mechanical Strength | >1.2 MPa Burst Pressure |
| Typical Pure Water Flux | 250–450 L/m²·h @ 0.1 MPa, 25°C |
| Compatibility | Interchangeable with Dow/Omexell UF Modules (e.g., 2660, 2860) |
| Application Scope | Municipal Wastewater Reuse, RO Pretreatment, Industrial Feedwater, Bottled Water Production, Seawater Desalination Pretreatment, Oilfield Injection Water, High-Strength Industrial Effluent (Coal/Petrochemical), Pharmaceutical Biomolecule Recovery, Dairy Protein Fractionation, Fruit Juice Clarification & Concentration |