Common Laboratory Equipment
Filter
Showing 6691–6720 of 18046 results
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HL-6D |
| Price | USD 940 (FOB Shanghai) |
| Dimensions | 240 × 280 × 170 mm |
| Flow Rate | 2,000–150,000 mL/h |
| Maximum Back Pressure | ≥2 kg/cm² (≈196 kPa) |
| Speed Display | Digital RPM readout |
| Timer Range | 1 second to 100 minutes (start/stop & total run time) |
| Stop Delay | 1 second to 100 minutes |
| Operating Modes | Continuous, Timed Run, Volume Dispensing (Fill Mode), Memory Recall for Last Settings |
| Brand | Hailong |
|---|---|
| Origin | Shanghai, China |
| Model Series | HLA-2LP, HLA-5LP, HLA-10LP, HLA-08LP |
| Output Flow | 0–2 L/min |
| Output Pressure | 0–0.5 MPa (HLA-2LP/5LP/10LP) |
| Hydrocarbon Content | < 0.1 ppm (v/v) |
| Dew Point | 0–40 °C |
| Power Consumption | 560–650 W |
| Noise Level | ≤45 dB(A) |
| Tank Volume | 23 L (HLA-08LP only) |
| Compliance | Designed for ISO 8573-1 Class 1:4:1 (compressed air purity for analytical instrumentation) |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | HLA-10LP |
| Price Range | USD 140–7,200 |
| Hydrocarbon Removal Principle | Catalytic Oxidation + Dual-Stage Adsorption |
| Output Flow Rate | 0–10 L/min |
| Output Pressure | 0–0.5 MPa |
| Total Hydrocarbon Content (THC) | ≤0.1 ppm (v/v) |
| Dew Point | –40 °C (at 0.5 MPa, verified per ISO 8573-1:2010 Class 2.2.2) |
| Brand | HLA |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | 180C Ultra-Quiet |
| Price Range | USD $1,400 – $7,200 (FOB) |
| Hydrocarbon Removal Principle | Multi-Stage Precision Filtration (Activated Carbon + Catalytic Oxidation) |
| Output Flow Rate | 0–180 L/min |
| Output Pressure | 0–0.65 MPa (gauge) |
| Total Hydrocarbon Content | < 0.1 ppmv (as methane equivalent) |
| Dew Point | −40 °C to +40 °C (adjustable via integrated refrigerated dryer) |
| Noise Level | < 45 dB(A) at 1 m |
| Tank Volume | 35 L |
| Dimensions (W×D×H) | 970 × 520 × 750 mm |
| Weight | 200 kg |
| Brand | Hailong |
|---|---|
| Model | HLA-2000II / HLA-5000II |
| Origin | Shanghai, China |
| Compressor Type | Domestic oil-free scroll compressor |
| Output Flow | 0–2000 mL/min (HLA-2000II) / 0–5000 mL/min (HLA-5000II) |
| Output Pressure | 0–0.5 MPa (factory-set at 0.4 MPa) |
| Hydrocarbon Content | <0.1 ppm (v/v) |
| Dew Point | 0–40 °C |
| Power Consumption | 200 W (HLA-2000II) / 220 W (HLA-5000II) |
| Dimensions (W×D×H) | 460 × 290 × 380 mm |
| Weight | 20 kg |
| Operating Ambient | 0–40 °C, <85% RH |
| Brand | HLAL |
|---|---|
| Origin | Shanghai, China |
| Model | HLAL-1000, HLAL-2000 |
| Output Flow Rate | 1000 mL/min, 2000 mL/min |
| Maximum Input Air Pressure | 0–0.6 MPa |
| Hydrocarbon Content (e.g., methane) in Output Air | <0.1 ppm |
| Operating Ambient Temperature | 0–40 °C |
| Relative Humidity Limit | <85% RH |
| Power Supply | 220 V ±10%, 50–60 Hz |
| Power Consumption | 350 W |
| Catalytic Bed Operating Temperature | 350–450 °C (factory-set at 400 °C) |
| Dimensions (W×D×H) | 380 × 360 × 260 mm |
| Net Weight | ~16 kg |
| Brand | HLH |
|---|---|
| Origin | Shanghai, China |
| Model | 300II / 500II / 700II / 1L |
| Hydrogen Generation Principle | Alkali-electrolysis with single alkaline charge and daily distilled water replenishment |
| Output Flow Rate | 0–300 mL/min / 0–500 mL/min / 0–700 mL/min / 0–1000 mL/min |
| Output Pressure | 0–0.5 MPa |
| Hydrogen Purity | ≥99.999% |
| Power Consumption | 150–200 W (300II/500II/700II), 500 W (1L) |
| Brand | HLH |
|---|---|
| Origin | Shanghai, China |
| Model Range | HLH-200C / HLH-300C / HLH-600C / HLH-1000C / HLH-2000C / HLH-3000C |
| Hydrogen Generation Principle | Proton Exchange Membrane (PEM) Electrolysis of Deionized Water |
| Output Flow Rate | 0–200 mL/min |
| Output Pressure | 0.4 MPa |
| Hydrogen Purity | 99.999% |
| Pressure Stability | < ±0.001 MPa |
| Power Consumption | 200 W |
| Input Water Resistivity | ≥ 2 MΩ·cm (deionized or double-distilled water) |
| Dimensions (W×D×H) | 350 × 220 × 340 mm |
| Net Weight | 12 kg |
| Brand | Hailong |
|---|---|
| Origin | Shanghai, China |
| Model | HLHA-300II, HLHA-500II |
| Hydrogen Purity | >99.999% |
| H₂ Flow Range | 0–300 mL/min (300II) / 0–500 mL/min (500II) |
| H₂ Pressure Range | 0–0.5 MPa (factory-set at 0.4 MPa) |
| Air Flow Range | 0–2000 mL/min (300II) / 0–5000 mL/min (500II) |
| Air Pressure Range | 0–0.5 MPa (factory-set at 0.4 MPa) |
| Hydrocarbon Concentration in Air Output | <0.1 ppm |
| Max Input Hydrocarbon in Ambient Air | <100 ppm |
| Pressure Stability Accuracy | <0.001 MPa |
| Max Power Consumption | 350 W (300II) / 450 W (500II) |
| Operating Temperature | 0–40 °C |
| Operating Humidity | ≤85% RH |
| Dimensions (W×D×H) | 300×480×380 mm |
| Weight | 29 kg |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | HLN-10LG |
| Pricing | Available Upon Request |
| Purity | >95.995% N₂ |
| Flow Rate | 0–10 L/min |
| Output Pressure | 0–0.5 MPa (factory-set at 0.4 MPa) |
| Power Supply | 220 V ±10%, 50 Hz ±5% |
| Max. Power Consumption | 80 W |
| Operating Environment | 10–40 °C, ≤85% RH |
| Warranty | 1-year system warranty |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Country of Origin | PRC |
| Model | HLN-1L |
| Pricing | Available Upon Request |
| Purity | >99.999% N₂ |
| Flow Rate | 0–1 L/min |
| Output Pressure | 0–0.5 MPa (factory-set at 0.4 MPa) |
| Power Supply | 220 V ±10%, 50 Hz ±5% |
| Max. Power Consumption | 185 W |
| Operating Ambient | 10–40 °C, RH ≤85%, non-corrosive, low-dust environment |
| Warranty | 1-year system warranty |
| Brand | Hailong |
|---|---|
| Origin | Shanghai, China |
| Model | HLA-300G, HLA-500G |
| Gas Purity | N₂ > 99.997%, H₂ > 99.999% |
| Output Flow | N₂/H₂: 0–300 mL/min (HLA-300G), 0–500 mL/min (HLA-500G) |
| Air | 0–2000 mL/min (HLA-300G), 0–5000 mL/min (HLA-500G) |
| Output Pressure | 0–0.5 MPa (factory-set at 0.4 MPa) for all gases |
| Design | Integrated monoblock chassis |
| Control Mode | On/Off switch control |
| Power Supply | 220 V ±10%, 50 Hz ±5% |
| Max Power | 750 W (HLA-300G), 850 W (HLA-500G) |
| Dimensions | 460 × 310 × 670 mm |
| Weight | 47 kg |
| Operating Environment | 10–40 °C, RH ≤85%, non-corrosive, low-dust ambient |
| Brand | HLT |
|---|---|
| Origin | Shanghai, China |
| Model | HLT-300II, HLT-500II |
| Gas Purity | N₂ > 99.997%, H₂ > 99.999%, Air: oil-free, dried, triple-purified |
| Output Flow | N₂/H₂: 0–300 mL/min (HLT-300II) / 0–500 mL/min (HLT-500II) |
| Air | 0–2000 mL/min (HLT-300II) / 0–5000 mL/min (HLT-500II) |
| Output Pressure | H₂/N₂/Air: 0–0.5 MPa (factory-set at 0.4 MPa) |
| Power Supply | 220 V ±10%, 50 Hz ±5% |
| Max. Power | 450 W |
| Dimensions (W×D×H) | 460 × 310 × 670 mm |
| Weight | 39 kg |
| Operating Environment | 10–40 °C, RH ≤85%, non-corrosive, low-dust ambient |
| Brand | Hailong |
|---|---|
| Origin | Shanghai, China |
| Model | HLT-500G |
| Nitrogen Purity | >99.999% |
| Hydrogen Purity | >99.999% |
| Air Quality | Oil-free, Dry, Triple-Purified |
| N₂/H₂ Flow Range | 0–500 mL/min |
| Air Flow Range | 0–5000 mL/min |
| H₂ Output Pressure | 0–0.4 MPa (factory-set at 0.3 MPa) |
| N₂ Output Pressure | 0–0.5 MPa (factory-set at 0.4 MPa) |
| Air Output Pressure | 0–0.4 MPa |
| Power Supply | 220 V ±10%, 50 Hz ±5% |
| Max Power Consumption | 500 W |
| Operating Environment | 10–40 °C, RH ≤85%, non-corrosive, low-dust |
| Warranty | 1-year full unit, 3-year electrolyzer |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | HM-04Ⅱ |
| Pricing | Available Upon Request |
| Sample Tube Quantity | 4 |
| Tube Material | Gold-Plated Stainless Steel |
| Tube Dimensions | φ60 × 56 mm (160 mL) |
| Heating Block Material | Aluminum |
| Heating Method | Resistive Heating |
| Temperature Range | Ambient to 200 °C |
| Purge Gas | Helium or CO₂ |
| Purge Flow Rate | 20–200 mL/min |
| Heater Unit Dimensions | 285(W) × 310(D) × 225(H) mm |
| Heater Unit Weight | 21.5 kg |
| Controller Dimensions | 320(W) × 320(D) × 215(H) mm |
| Controller Weight | 11 kg |
| Power Supply | 100 V / 10 A |
| Optional Accessories | Water-Cooled Circulation Unit, Cross-Compatibility Adapter for Third-Party Sorbent Tubes |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | HM-24 |
| Pricing | Available Upon Request |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | HMS-350 |
| Price | USD 280 (FOB Shanghai) |
| Speed Range | 0–3000 rpm |
| Operating Mode | Touch-Activated (Instant-On) |
| Oscillation Type | Reciprocating Horizontal Motion |
| Housing Material | Powder-Coated Aluminum Alloy |
| Amplitude | 4 mm |
| Display | None |
| Motor Power | 15 W |
| Platform Diameter | 65 mm |
| External Dimensions (W×D×H) | 144 × 150 × 180 mm |
| Maximum Load Capacity | 1.0 kg |
| Compliance | CE-marked per EN 61010-1:2019, RoHS 2015/863/EU |
| Brand | HNP |
|---|---|
| Origin | Germany |
| Model | MZR-4605 |
| Flow Rate | 0.012–72 mL/min (min. 10 µL/h) |
| Viscosity Range | 0.3–50,000 mPa·s |
| Precision (CV) | < 1% |
| Speed Range | 1–6000 rpm |
| Fluid Connections | 1/4"–28 UNF (frontal) |
| Wetted Materials | SS 316L (1.4404 / 1.4435), tungsten carbide–nickel matrix |
| Shaft Seal | graphite-reinforced PTFE + SS 316L |
| static seal | FPM (optional EPDM, FFPM) |
| Motor | 24 V DC servo motor, 44 W |
| Controller | integrated 16-bit microcontroller |
| Interfaces | 0–10 V analog, RS-232, 1 digital I/O |
| Dimensions | 143 × 45 × 65 mm (L×W×H) |
| Weight | ~800 g |
| Differential Pressure Range | 0–10 bar (water, 1 mPa·s) |
| Max Inlet Pressure | 5 bar (10–40 bar*) |
| Operating Temperature | −5 to +60 °C (−20 to +150 °C*) |
| Displacement Volume | 12 µL |
| Minimum Dose | 2 µL |
| Brand | HNP-M |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | MZR-7241 |
| Pricing | Available Upon Request |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Drive Type | Electric |
| Speed Range | 0–300 rpm |
| Flow Rate | 1 µL/h – 1.1 L/h |
| Pressure Range | 0–150 bar |
| Viscosity Range | 0.3–1,000,000 mPa·s |
| Wetted Materials | Alloy C22, 316L SS, PEEK™, Al, ZrO₂ ceramic, Ni-based tungsten carbide |
| Explosion-Proof Options | Available |
| Pulse Amplitude | <±0.5% of set flow |
| Dead Volume | <10 µL (model-dependent) |
| Accuracy | ±0.5% of full scale (typical, under calibrated conditions) |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Drive Type | Electric Motor |
| Speed Range | 0–300 rpm |
| Flow Rate | 1 µL/h – 1.1 L/h |
| Pressure Range | 0–150 bar |
| Viscosity Range | 0.3–1,000,000 mPa·s |
| Materials | Tungsten Carbide & Ceramic Components |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Drive Type | Electric DC Servo Motor |
| Speed Range | 0–6000 rpm |
| Flow Rate | 1 µL/h – 1.1 L/h |
| Viscosity Range | 0.3 – 1,000,000 mPa·s |
| Pressure Differential | up to 150 bar |
| Temperature Range | −55 °C to +150 °C |
| Precision (CV) | 0.1–3 % |
| Wetted Materials | SS 316L, WC-Ni, ZrO₂, SiC, Alloy C22, FFKM, PTFE |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-11507 |
| Flow Rate | 58–1152 mL/min |
| Speed Range | 300–6000 rpm |
| Precision (CV) | <1% |
| Max Differential Pressure | 40 bar (at 1 mPa·s), 80 bar (≥16 mPa·s) |
| Viscosity Range | 0.3–5,000 mPa·s (up to 10,000 mPa·s with optional configuration) |
| Displacement per Revolution | 192 µL |
| Minimum Dose Volume | 100 µL |
| Motor | 3-phase AC, 250 W, IEC 063, IP55, 240/400 V, 50 Hz |
| Wetted Materials | SS 316L (1.4435), Tungsten Carbide, Alloy C276 (2.4819), Graphite-Reinforced PTFE, FPM (optional EPDM/FFPM) |
| Connection | 3/8" NPT female (lateral option available) |
| Dimensions (L×W×H) | 358 × 120 × 224 mm |
| Weight | ~22 kg |
| Ambient Temp | −20 to +40 °C (−55 to +60 °C with options) |
| Operating Temp | −5 to +40 °C (−20 to +120 °C with options) |
| ATEX Certification | II 2G c T4 X (Zone 1 & 2) |
| Thermal Protection | 6-piece PTC thermistor array |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-11507 |
| Flow Rate | 29–1152 mL/min |
| Speed Range | 150–6000 rpm |
| Viscosity Range | 0.3–150,000 mPa·s |
| Precision (CV) | <1% |
| Displacement | 192 µL |
| Minimum Dose | 100 µL |
| Pressure Differential | 0–40 bar (at 1 mPa·s), up to 140 bar (≥16 mPa·s) |
| Max Inlet Pressure | 10 bar |
| Wetted Materials | SS 316L, Tungsten Carbide, Alloy C276, Graphite-Enhanced PTFE, FPM |
| Motor | 3-phase AC, 240/400 V, 100 Hz, 240 W, IP55, IEC 056, 4-pole |
| Dimensions (L×W×H) | 303×110×171 mm |
| Weight | 9.3 kg |
| Ambient Temp | −5 to +40 °C |
| Fluid Temp | −5 to +60 °C (−20 to +120 °C with optional heating/insulation) |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-11557 |
| Flow Rate | 29–1152 mL/min |
| Viscosity Range | 0.3–1,000 mPa·s |
| Precision | CV < 1% |
| Speed Range | 150–6000 rpm |
| Max Pressure | 60 bar |
| Displacement | 192 µL |
| Minimum Dose | 100 µL |
| Wetted Materials | Alloy C22 (DIN 2.4602), SSiC, Al₂O₃, ZrO₂, FFKM (Kalrez® Spectrum™ 6375) |
| Motor | 240/400 V AC, 4-pole, 100 Hz, 240 W, IP55 |
| Dimensions | 291 × 130 × 171 mm |
| Weight | ~12 kg |
| Operating Temperature | −5 to +60 °C (up to +100 °C with optional configuration) |
| Torque Transmission | 6-pole NdFeB magnetic coupling |
| Inlet Connection | 3/8" NPT female |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-11557 Ex |
| Flow Rate | 58–1152 mL/min (29–576 mL/min*) |
| Viscosity Range | 0.3–1,000 mPa·s |
| Precision | CV < 1% |
| Speed Range | 300–6000 rpm (150–3000 rpm*) |
| Displacement | 192 µL |
| Minimum Dose | 100 µL |
| Max Differential Pressure | 0–60 bar (up to 16 mPa·s) |
| Max System Pressure | 60 bar (870 psi) |
| Inlet Connection | 3/8" NPT female |
| Housing Material | Alloy C22 (DIN 2.4602), optional SS316L |
| Shaft/Bearing Material | Sintered Silicon Carbide (SSiC) |
| Rotors | Stabilized ZrO₂, optional WC-Ni |
| Seals | FFKM (Kalrez® Spectrum™ 6375), optional FPM/EPDM |
| Motor | 3-phase AC, IEC 063, 2-pole, IP55, 240/400 V, 50 Hz, 250 W |
| Dimensions (L×W×H) | 345 × 146 × 224 mm |
| Weight | ~25 kg |
| Operating Temperature | −5 to +40 °C (−20 to +100 °C* with optional configuration) |
| Thermal Protection | PTC resistor (6-element) |
| ATEX Certification | II 2G c IIB T3, Zone 1 & 2 compliant |
| Enclosure Rating | IP55 |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-11558 |
| Flow Rate | 0.19–1152 mL/min |
| Speed Range | 1–6000 rpm |
| Precision (CV) | <1% |
| Max Differential Pressure | 60 bar |
| Max Operating Temperature | −5 to +40 °C (up to +100 °C with optional components) |
| Displacement per Revolution | 192 µL |
| Minimum Dose | 100 µL |
| Motor | Brushless DC, 42 V DC, IP54, 368 W |
| Encoder Resolution | 500 pulses/rev |
| Wetted Materials | Alloy C22 (DIN 2.4602), SSiC, Al₂O₃, ZrO₂, FFKM (Kalrez® Spectrum™ 6375) |
| Fluid Connections | 3/8" NPT internal thread |
| Dimensions (L×W×H) | 301 × 130 × 129 mm |
| Weight | ~11 kg |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-2505 |
| Flow Rate Range | 0.0015–9 mL/min |
| Speed Range | 1–6000 rpm |
| Precision (CV) | <1% |
| Viscosity Range | 0.3–25,000 mPa·s |
| Displacement per Revolution | 1.5 µL |
| Minimum Dose | 0.25 µL |
| Pressure Differential | up to 15 bar (oil, 16 mPa·s) |
| Wetted Materials | SS 316L, tungsten carbide, graphite-reinforced PTFE, FPM seals |
| Motor | 24 V DC servo motor, 44 W |
| Controller | Integrated 16-bit microcontroller |
| Dimensions (L×W×H) | 140 × 45 × 65 mm |
| Weight | ~780 g |
| Operating Temperature | −5 to +60 °C (extended range −20 to +150 °C with optional configuration) |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-2509 Ex |
| Flow Rate | 0.0015–7 mL/min |
| Speed Range | 1–4700 rpm |
| Viscosity Range | 0.3–5000 mPa·s |
| Precision (CV) | <1% |
| Displacement | 1.5 µL |
| Minimum Dose | 0.25 µL |
| Max. Differential Pressure | 0–5 bar (≥16 mPa·s) |
| Max. Inlet Pressure | 5 bar (10 bar with optional fluid seal module) |
| Wetted Materials | SS 316L, tungsten carbide, Ni-based alloy, graphite-reinforced PTFE, FPM (FKM), optional EPDM/FFPM |
| Motor | 24 V DC, 2 A, 53 W, encoder 500 ppr (HEDL 5540) |
| Cable Length | 10 m |
| Weight | ~2700 g |
| ATEX Certification | II 2G c T5 X |
| Installation Zone | Zone 1 & 2 |
| Operating Temperature | −5 to +40 °C |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-2521 |
| Flow Rate | 0.0015–9 mL/min |
| Viscosity Range | 0.3–100 mPa·s (up to 1,000 mPa·s with optional configuration) |
| Precision | CV < 1% |
| Displacement Volume | 1.5 µL |
| Minimum Dose Volume | 0.25 µL |
| Speed Range | 1–6,000 rpm |
| Pressure Range | 0–1.5 bar differential |
| Max Inlet Pressure | 1 bar |
| Wetted Materials | SS 316L, ceramic, tungsten carbide, nickel-based alloys, epoxy |
| Shaft Seal | graphite-reinforced PTFE + SS 316L |
| Static Seals | FPM (optional EPDM/FFPM) |
| Motor | Brushed DC, 3 W nominal, 18 V, 16-pulse magnetic encoder |
| Interfaces | RS-232, CANopen (DSP 301/DSP 402) |
| Dimensions | Ø13 mm × 75 mm |
| Weight | ~56 g |
| Operating Temperature | −20 to +60 °C |
| Fluid Connections | 2 mm OD push-in fitting (manifold M2.1 optional) |