Common Laboratory Equipment
Filter
Showing 9361–9390 of 18046 results
| Brand | Labotery |
|---|---|
| Origin | Tianjin, China |
| Model | LX1811 |
| Instrument Type | Box Furnace |
| Max Temperature | 1200 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 7.5 kW |
| Heating Rate (to Max Temp) | ≤20 °C/min |
| Heating Element | Alloy Wire |
| Internal Chamber Dimensions | 250 × 300 × 250 mm |
| Rated Voltage | 380 V |
| Working Temperature Range | 750–1100 °C |
| Chamber Volume | 18 L |
| Net Weight | 90 kg |
| Brand | Labotery |
|---|---|
| Origin | Tianjin, China |
| Model | LXS-15 |
| Instrument Type | Integrated Circulating Chiller |
| Cooling Method | Water-cooled |
| Temperature Control Range | 8–35 °C |
| Temperature Stability | ±1 °C |
| Refrigeration Capacity | 3000 W |
| Circulation Pump Pressure | 4 bar |
| Circulation Flow Rate | 12.1 L/min |
| Reservoir Volume | 6 L |
| Control System | PID-based LCD Microprocessor Controller |
| Refrigeration Technology | Hot Gas Bypass (Continuous Modulation, Non-Cycling) |
| Heat Exchanger Type | Plate-type |
| Refrigerant | Eco-friendly, Non-CFC/Non-HFC (Compliant with ISO 5149 & EN 378) |
| Pump | Imported Low-Noise Centrifugal Pump |
| Fluid Compatibility | Deionized or Distilled Water Only |
| Safety Features | Overpressure Relief Bypass, Dry-run Protection, High-Temperature Cut-off, Reservoir Level Sensor |
| Brand | Labotery |
|---|---|
| Model | SY-20 |
| Type | Benchtop Constant-Temperature Water Bath |
| Origin | Tianjin, China |
| Power Supply | 220 V AC, 50 Hz |
| Heating Power | 800 W |
| Temperature Range | RT + 5 °C to 100 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Accuracy | ±0.1 °C |
| Temperature Uniformity | ±0.5 °C |
| Chamber Dimensions (L×W×H) | 500 × 300 × 200 mm |
| External Dimensions (L×W×H) | 560 × 390 × 355 mm |
| Timer Range | 1–9999 minutes |
| Construction | Stainless Steel Inner Tank and Lid |
| Control System | Microprocessor-Based PID Controller with Dual Digital Display (Set & Actual Temperature) |
| Compliance | Designed for GLP-compliant laboratories |
| Brand | Labotery |
|---|---|
| Origin | Tianjin, China |
| Model | XJS36-42W |
| Automation Level | Fully Automatic |
| Digestion Positions | 24 |
| Max Heating Temperature | 360 °C |
| Temperature Control Accuracy | ±0.2 °C |
| Heating Principle | High-Purity Graphite Block with PTFE Coating |
| Reagent Channels | 36 |
| Power Supply | 220 V / 50 Hz |
| Sample Capacity | 42 × 50 mL (compatible with standard digestion tubes) |
| Temperature Resolution | 0.1 °C |
| Inter-Position Uniformity | ±1.5 °C |
| Single-Position Temp. Stability | ±0.5 °C |
| Operating Ambient | 5–25 °C |
| Continuous Operation Duration | >48 h |
| Brand | Labotery |
|---|---|
| Origin | Tianjin, China |
| Model | XJT16-20 / XJT20-20 / XJT40-20 / XJS60-24 / XJS20-42 / XJS40-42 |
| Heating Method | High-Purity Graphite Block with PTFE Coating |
| Max Temperature | 220 °C / 260 °C / 450 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Control Accuracy | ±0.2 °C |
| Inter-hole Uniformity | ±1.5 °C |
| Sample Capacity | 20×100 mL / 40×50 mL / 60×50 mL / 20×100 mL / 40×50 mL |
| Heating Power | 1800–3000 W |
| Control System | 30-Step Programmable LCD Controller with PID Auto-Tuning |
| Safety Features | Over-Temperature Alarm, Acid-Resistant Modular Design, Reflux Venting |
| Compliance | Designed for EPA 3010a, 3050b, 3060 |
| Brand | Labotery |
|---|---|
| Origin | Tianjin, China |
| Model | ZQPW-70/300 |
| Temperature Range | 4–65°C |
| Oscillation Frequency | 30–300 rpm |
| Frequency Accuracy | ±1 rpm |
| Orbit Diameter | Ø26 mm |
| Temperature Uniformity | ±0.8°C (at 37°C) |
| Temperature Stability | ±0.3°C (at 37°C) |
| Chamber Dimensions (W×D×H) | 940×570×680 mm |
| Shelf Size | 940×570 mm |
| Max Capacity | 5000 mL × 8 or 3000 mL × 11 or 2000 mL × 15 or 1000 mL × 28 or 500 mL × 45 or 250 mL × 66 or 100 mL × 84 |
| Standard Fixture | Universal spring clamps (for 1000 mL × 20) |
| Display | LCD with PID microprocessor control |
| Cooling System | Imported CFC-free compressor with dust-filtered forced-air circulation |
| Power Supply | AC 220 V ±10%, 50–60 Hz |
| Rated Power | 1.5 kW |
| Timer Range | 0–9999 min |
| Programmable Modes | Forward rotation / Reverse rotation / Stop / Alternating sequence |
| Door Safety Interlock | Automatic oscillation halt upon door opening |
| Diagnostic Function | Self-diagnosis of temperature, motor, and system faults |
| Alarm | Audible/visual over-temperature alarm with auto cut-off |
| Brand | LabPlant |
|---|---|
| Origin | United Kingdom |
| Model | SD-06 |
| Max. Feed Rate | 32 mL/min |
| Inlet Temp. Range | 40–250 °C |
| Outlet Temp. Control | Yes |
| Air Flow | 100–500 m³/h |
| Heating Power | 3 kW |
| Built-in Compressor | 2.0 m³/h @ 5 bar, up to 9 bar |
| Nozzle Diameter (Std.) | 0.5 mm |
| Particle Size Range | 0.1–40 µm |
| Drying Time | 1.0–2.0 s |
| Max. Throughput | 1.5 L/h (water), 2.0 L/h (organic solvents) |
| Dimensions (H×W×D) | 1110 × 825 × 600 mm |
| Weight | 80 kg |
| Voltage | 220 V / 50 Hz, 13 A |
| Material | 316L stainless steel frame, borosilicate glass drying chamber & cyclone |
| Solvent Compatibility | Yes (with N₂ inerting option) |
| Origin | UK |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | SD-06 |
| Pricing | Upon Request |
| Max Evaporation Capacity | 1.5 L H₂O/h |
| Inlet Air Temperature Range | 40–250 °C |
| Drying Air Flow Rate | 100–300 m³/h |
| Heating Power | 3 kW |
| Compressor Capacity | 1.7 m³/h at 4 bar |
| Feed Rate | Up to 32 mL/min |
| Automatic Nozzle Cleaning Pressure | 2.3 bar (adjustable frequency) |
| Standard Nozzle Orifice | 0.5 mm |
| Anti-Clogging Mode Selection | High/Medium/Low |
| Dimensions (H×W×D) | 1110 × 825 × 600 mm |
| Weight | 80 kg |
| Electrical Supply | 220 V / 50 Hz, 13 A |
| Brand | LabPlant |
|---|---|
| Origin | United Kingdom |
| Model | SD-07AG |
| Maximum Feed Rate | 2000 mL/h (water equivalent) |
| Inlet Air Temperature Range | Ambient to 250 °C |
| Particle Size Output | 0.5 mm (typical median, adjustable via nozzle selection and process parameters) |
| Nozzle Orifice Options | 0.5 mm (standard), 0.7 mm, 1.0 mm, 2.0 mm |
| Air Flow Capacity | 500 m³/h |
| Heater Power | 4000 W |
| Pump Flow Range | 0–36 mL/min (peristaltic) |
| Chamber Diameter | ≥300 mm |
| Control Accuracy | ±1.0 °C |
| Integrated Oil-Free Compressor | Yes |
| Touchscreen Interface | Industrial IR Touch Panel with PLC-Based Control System |
| Compliance | Designed for GMP-aligned laboratory environments |
| materials of construction | 304 stainless steel enclosure, 316 stainless steel & PTFE wetted parts |
| Brand | LabPlant |
|---|---|
| Origin | United Kingdom |
| Model | SD-Basic |
| Maximum Feed Rate | 1500 mL/h |
| Inlet Air Temperature Range | Ambient to 250 °C (standardly up to 200 °C, upgradeable) |
| Outlet Air Temperature Range | Programmable, monitored in real time |
| Air Flow Rate | 70 m³/h (fixed) |
| Drying Residence Time | 1.0–2.0 s |
| Nozzle Orifice Diameter | 0.5 mm |
| Particle Size Distribution | 0.1–40 µm |
| Minimum Sample Volume | 20 mL |
| Heating Power | 3 kW |
| Dimensions (W×D×H) | 1100 × 500 × 500 mm |
| Weight | 60 kg |
| Electrical Supply | 220 V / 50 Hz |
| Pump Capacity | Up to 32 mL/min (peristaltic) |
| Brand | LabS |
|---|---|
| Origin | Guangdong, China |
| Model | FL-0904A / FL-1105A |
| Instrument Type | Integrated Circulating Chiller |
| Cooling Method | Water-Cooled |
| Temperature Range | 5–40 °C |
| Temperature Stability | ±0.5 °C |
| Refrigeration Capacity | 1600–2700 W |
| Circulating Pump Pressure | 1.0 bar |
| Circulating Pump Flow Rate | 42 L/min |
| Reservoir Volume | 8.5 L |
| Heat Exchanger Material | Stainless Steel |
| Compressor | Premium Industrial-Grade |
| Refrigerant Option | R134a or Eco-Friendly Alternative (Optional) |
| Noise Level | Low-Noise Operation |
| Control System | Microprocessor-Based Digital Controller |
| Dual-Circuit Capability | Internal + External Loop Support |
| Remote Control Interface | Optional 0–10 V or Dry Contact Input |
| Brand | PerfectLight |
|---|---|
| Origin | Beijing, China |
| Model | 6A |
| Valve Material | High-Borosilicate Glass |
| Actuation | Pneumatic/Electric Auto-Actuators |
| Gas Mixing Time | <10 min (H₂, O₂, CH₄, CO) |
| Calibration Linearity | R² > 0.9995 (H₂: 100 μL–10 mL) |
| Repeatability | RSD < 3% (n = 4) |
| Sampling Volume | 0.6 mL or 2.0 mL (selectable) |
| System Dead Volume | 65 mL |
| Vacuum Tightness | ≤1 μmol O₂/24 h |
| Absolute Vacuum Limit | ≤1.5 kPa |
| Operating Pressure Range | 0 kPa (vacuum) to ambient pressure |
| Pump Type | Oil-Free Magnetic-Drive Piston Pump (no electrical wiring in gas path) |
| Flow Direction Control | Integrated Unidirectional Valve Architecture |
| Temperature Control | 10-Stage Programmable, ±0.1 °C accuracy, up to 200 °C (loop & injection lines) |
| Condenser | Spherical or Coiled Glass Cold Trap (standard), Optional Cryogenic Cold Trap |
| Detection Limits (� | mol): H₂: 0.05 |
| O₂ | 0.1 |
| CH₄/CO | 0.0005 |
| Software | 32-bit Embedded Control Suite + 4.5″ TFT Touchscreen |
| Compliance | ASTM E2500, ISO/IEC 17025-aligned architecture, GLP-ready audit trail logging |
| Brand | PerfectLight |
|---|---|
| Origin | Beijing, China |
| Model | Labsolar-6A Online Photocatalytic Analysis System |
| Reaction Vessel Count | 1 |
| Reaction Volume | 65 mL |
| Vacuum Tightness | ≤1 μmol/24 h (O₂) |
| Gas Mixing Time (H₂/O₂/CH₄/CO) | <10 min |
| Quantitative Loop Options | 0.6 mL or 2 mL |
| System Tubing Volume | 65 mL |
| Absolute Vacuum Level | ≤1.5 kPa |
| Operating Pressure Range | 0 kPa to atmospheric |
| Valve Count | 7 |
| Tubing Material | High-Borosilicate Glass |
| Temperature Control Range (Tubing & Sampling Lines) | Up to 200 °C (10-segment programmable, ±0.1 °C accuracy) |
| Detection Limits (� | mol): H₂: 0.05 |
| O₂ | 0.1 |
| CH₄/CO | 0.0005 |
| Repeatability (RSD) | <3% for quadruplicate injections |
| Linearity (H₂, 100 � | L–10 mL): R² > 0.9995 |
| Exhaust Volume per Cycle | 6 mL |
| Pump Type | Passive Magnetic-Drive Plunger Pump (wire-free, no H₂ evolution risk, unidirectional flow) |
| Sampling Method | Fixed-volume loop integrated in multi-port glass sampling valve (non-chromatographic) |
| Condenser | Spherical or coiled type |
| Enclosure | Metal safety cabinet with portable light-shielding hood |
| Software | 32-bit control suite + 4.5″ TFT color touchscreen |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic |
| Model | LabSolar-IIIAG |
| Quotation | Available Upon Request |
| Temperature Range | Ambient Only |
| Temperature Control Accuracy | ±0.5 °C at Ambient |
| Reaction Units | 1 |
| Reaction Volume | 150 mL |
| Vacuum Level (Absolute) | ≤0.1 MPa |
| Operating Pressure Range | 0 kPa to Atmospheric |
| Gas-Tightness | ≤1 kPa pressure drift over 24 h |
| Circulation Pump | Brushless Magnetic Drive, ≥4000 rpm |
| Quantitative Loop Volume | 1.5 mL |
| Gas Storage Vessel | 250 mL borosilicate glass |
| Condenser | Spherical reflux condenser |
| Cold Trap | Integrated for low-boiling component separation |
| Total Internal Tubing Volume | 150 mL |
| Minimum Tubing ID | 3 mm |
| Valves | 13 high-precision borosilicate glass valves with lapped sealing surfaces |
| Vacuum Grease | Dow Corning® high-performance vacuum grease (–40 °C to 200 °C, low vapor pressure, chemical resistant) |
| Sample Introduction | Manual on-line injection via glass multi-port valve with integrated quantitative loop |
| Linearity (H₂) | R² > 0.999 across 100 μL–10 mL range |
| Repeatability (RSD) | <3% for quadruplicate injections at identical concentration |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | 90-Series |
| Price | USD 76.50 (FOB Shanghai) |
| Dimensions | 185 × 185 × 130 mm |
| Max. Stirring Volume | 3000 mL |
| Speed Range | 0–1250 rpm (infinitely variable) |
| Stir Bar Material Compatibility | Standard stainless-steel rods (e.g., PTFE-coated, ceramic-core) |
| Display | LED digital speed readout |
| Construction | Die-cast aluminum housing with thermal insulation |
| Compliance | CE, RoHS, ISO 9001-manufactured supply chain |
| Brand | LabTech |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Manufacturer |
| Product Category | Domestic |
| Model | Acid6 |
| Instrument Type | Multichannel Pipettor |
| Automation Level | Motorized Pipettor |
| Number of Channels | 6 |
| Accuracy | ≤1% |
| Fluid Delivery Mechanism | High-Precision Peristaltic Pumps |
| Reagent Pathway Material | PFA Tubing |
| Control Interface | Wireless PAD with Graphical UI |
| Safety Features | Integrated Acid Fume Exhaust System, HEPA-Filtered Intake, Delayed Fan Shutdown, Real-Time Warning System |
| Mechanical Architecture | XYZ Three-Axis Robotic Arm |
| Ventilation Design | Built-in Illuminated Hood with Space-Saving Integrated Exhaust |
| Brand | LabTech |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | AIR Series |
| Pricing | Available Upon Request |
| Compression Principle | Oil-Free Rotary Vane |
| Flow Rate | Up to 120 L/min (typical for benchtop lab-grade units) |
| Operating Pressure | 0–8 bar (adjustable, factory-set at 7 bar) |
| Pressure Dew Point | ≤ −40 °C (at 7 bar) |
| Particulate Filtration | ≤ 0.01 µm (ISO Class 1, per ISO 8573-1:2010) |
| Brand | LabTech |
|---|---|
| Model | AIR Series |
| Origin | Beijing, China |
| Manufacturer | LabTech (Producer) |
| Type | Laboratory-Grade Oil-Free Scroll/Scroll-Derived Compressor System |
| Compression Principle | Positive Displacement (Scroll-Type, Oil-Free) |
| Flow Rate | Configurable per model (Typical Range: 5–30 L/min @ 7 bar) |
| Operating Pressure | Adjustable up to 8 bar (g) |
| Dew Point | ≤ –20 °C (at 7 bar, via integrated centrifugal + electronic desiccant-assisted drying) |
| Particulate Filtration | ≤ 0.01 µm (Class 1, ISO 8573-1:2010) |
| Noise Level | ≤ 48 dB(A) |
| Power Supply | 220 V AC, 50 Hz |
| Safety Compliance | Overpressure Protection (Mechanical + Electronic), Thermal Cut-off, IP20 Enclosure |
| Brand | LabTech |
|---|---|
| Model | AutoClean |
| Origin | Beijing, China |
| Equipment Type | Gel Purification System |
| Compliance | EPA Method 3640 |
| Application Scope | Pesticide Residue Analysis, Lipid- and Fat-Rich Matrix Cleanup, Macromolecule/Small-Molecule Fractionation |
| Configurable Integration | Compatible with Quantitative Concentration and Automated SPE Modules |
| Column | Pre-packed Stainless Steel GPC Column |
| Pump | Dual-Piston Precision Solvent Delivery Pump with Dampener |
| Detector | Variable-Wavelength UV Detector (UV-VIS) |
| Sample Handling | Full-Loop Injection Mode (≤10 mL), Auto-Sampling with Septum-Puncture Capability |
| Pressure Monitoring | Real-Time Pressure Sensing with Over-Pressure Alarm and Pressure Relief Function |
| Automation Platform | High-Accuracy 3-Axis Robotic Positioning System for Injection and Fraction Collection |
| Solvent Efficiency | Optimized Flow Path Design Reduces Solvent Consumption by >30% vs. Manual GPC |
| Column Protection | Integrated Back-Pressure Regulation Extends Analytical Column Lifespan in Downstream GC/HPLC Applications |
| Software | PC-Based Control with Audit Trail, Method Archiving, and Run Log Export (21 CFR Part 11 Ready) |
| Brand | LabTech |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Manufacturer |
| Product Category | Domestic |
| Model | AutoEmpore |
| Channel Configuration | Multi-channel |
| Extraction Technology | Membrane-based SPE |
| Sample Throughput | Up to 3 × 1 L water samples in ≤10 min (enrichment only) |
| Flow Rate | Up to 120 mL/min |
| Supported Formats | 25 mm & 47 mm SPE membranes |
| Integrated Features | On-line filtration, on-line water removal, independent dual-pump per channel, membrane-cartridge hybrid compatibility |
| Software Control | Mobile/tablet-based APP with method library, audit trail, and remote monitoring capability |
| Regulatory Alignment | Designed for GLP-compliant workflows |
| Background Performance | Ultra-low PFAS and phthalate background via shortened fluidic path and inert wetted materials |
| Membrane Source | In-house manufactured Empore™-compatible extraction membranes |
| Brand | LabTech |
|---|---|
| Origin | Beijing, China |
| Model | CDS 5200 |
| Pyrolysis Temperature Range | Ambient to 1400 °C (±0.1 °C accuracy) |
| Maximum Pressure Resistance | 500 PSI (3400 kPa) |
| Heating Rates | 10–20,000 °C/sec (pulse), 0.01–999.9 °C/sec or 0.01–999.9 °C/min (programmed) |
| Transfer Line Max Temp | 350 °C |
| Interface Temp | ≥350 °C |
| Reactor | 3″ × 1/4″ OD 316 stainless steel, catalyst-compatible up to 800 °C |
| Atmosphere Options | N₂, air, or custom gas |
| Integrated Cold Trap | Yes, with thermal desorption capability |
| Sample Path Materials | Inert (e.g., quartz, deactivated metal) |
| Brand | LabTech |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | Ultra-Clean Engineering System |
| Pricing | Available Upon Request |
| Brand | LabTech |
|---|---|
| Origin | Beijing, China |
| Pump Type | Diaphragm Vacuum Pump |
| Chemical Resistance | PTFE-Coated Components & Fluoropolymer Wetted Parts |
| Compliance | Suitable for GLP/GMP Environments (Audit-Ready Data Logging Optional) |
| Motor Power | Consult Factory |
| Ultimate Vacuum | Consult Factory |
| Pumping Speed | Consult Factory |
| Dimensions & Weight | Consult Factory |
| Certifications | CE, RoHS, ISO 9001 Manufacturing |
| Brand | LabTech |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Electric Heating Digestion System |
| Automation Level | Fully Automatic |
| Model | D-doctor |
| Brand | LabTech |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Graphite Block Digestion System |
| Automation Level | Fully Automated |
| Sample Capacity | 60 Positions |
| Max Heating Temperature | 230 °C |
| Temperature Control Accuracy | ±0.1 °C |
| Heating Principle | Electric Resistance Heating |
| Reagent Channels | 9 |
| Brand | LabTech |
|---|---|
| Origin | Beijing, China |
| Product Line | ED and EHD Series |
| Instrument Type | Electric Heating Digestion System |
| Automation Level | Semi-Automatic |
| Sample Capacity | Up to 77 positions |
| Maximum Sample Mass | ≥5 g per vessel |
| Heating Technology | Surround-Heating Graphite Block with PID-Controlled Temperature Regulation |
| Thermal Uniformity | ≤±1.5 °C across block surface |
| Construction | Fully Corrosion-Resistant Enclosure with High-Temperature Anti-Corrosion Coated Graphite Surface |
| Insulation Material | Imported High-Efficiency Thermal Insulation |
| Energy Efficiency | Optimized thermal retention yielding 2–5× faster digestion vs. conventional hot plates |
| Brand | Binzhenghong |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | OEM Producer |
| Origin Category | Domestic (China) |
| Model | NJ-50mL |
| Pricing | Upon Request |
| Brand | LabTech |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Electric Heating Digestion System |
| Automation Level | Semi-Automatic |
| Model | S16 / S36 |
| Heating Method | Uniform Surrounding-Heating Block |
| Temperature Control | PID-Based Digital Regulation |
| Safety Features | Dual-Temperature Alarm (High-Temp Audible/Visual + 50°C Surface Warning LED) |
| Design | Sealed Acid-Resistant Housing with Acid-Vapor & Liquid Intrusion Protection |
| Workflow Integration | Integrated Digestion–Acid Evaporation–Volume Finalization in Single Tube |
| Reagent Efficiency | ~50% Reduction via Reflux Vent Design |
| Optional Accessory | External Immersion Temperature Probe for Solution-Specific Monitoring |
| Brand | LabTech |
|---|---|
| Origin | Beijing, China |
| Model | S16/S36 |
| Instrument Type | Electric Heating Digestion System |
| Automation Level | Semi-Automatic |
| Digestion Positions | Configurable (16 or 36) |
| Max Operating Temperature | Up to 220 °C |
| Temperature Control Accuracy | ±0.5 °C @ 100 °C |
| Heating Principle | Uniform Surround-Heating with PID Feedback Control |
| Reagent Channel | Single-tube open-vessel configuration (no integrated reagent dispensing) |
| Safety Features | Dual-stage thermal alarm (visual + audible), 50 °C surface overheat indicator, acid-resistant sealed chassis, optional external solution temperature probe |
| Brand | LabTech |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Type | Oil-Free Diaphragm Pump |
| Pump Category | Chemical-Resistant Dual-Stage Vacuum Pump |
| Diaphragm Material | PTFE-Laminated Composite Membrane |
| Construction | Fluoropolymer-Wetted Components (PTFE, FFKM, PVDF) |
| Compliance Context | Designed for GLP/GMP-adjacent laboratory environments requiring solvent and aggressive chemical compatibility |