Common Laboratory Equipment
Filter
Showing 11191–11220 of 17931 results
| Origin | UK |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | GD100-R |
| Pricing | Upon Request |
| Temperature Range | 0–100 °C |
| Stability | ±0.1 °C |
| Refrigeration Power @ 20 °C | 250–1100 W (model-dependent) |
| Bath Volumes | 5–20 L |
| Drain Port | Optional (GD100-R2/R4/R5) |
| Optional Accessories | VTP1/VTP2 Vertical Turbine Pumps |
| Origin | UK |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | GD120 |
| Pricing | Available Upon Request |
| Temperature Range | −15 °C to +120 °C (model-dependent) |
| Stability @37 °C | ±0.02 °C |
| Uniformity @37 °C | ±0.05 °C |
| Set/Display Resolution | 0.1 °C |
| Bath Volume Options | 5 / 12 / 18 / 26 / 38 L |
| Max Flow Rate | 17 L/min |
| Max Pressure | 270 mbar (water) |
| Heating Power | 1.3–1.5 kW (voltage-dependent) |
| Pump Inlet/Outlet Diameter | 6 mm / 11 mm |
| Safety Features | Adjustable overtemperature cutoff, float-level switch, audible alarm |
| Compliance | Designed for GLP-compliant laboratory environments |
| Origin | UK |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | Optima-R Series |
| Pricing | Available Upon Request |
| Temperature Range | −20 to 100 °C |
| Stability | ±0.1 °C |
| Max Flow Rate | 17 L/min |
| Max Pressure | 270 mbar |
| Refrigeration Capacity @ 20 °C | 250–1100 W (model-dependent) |
| Bath Volumes | 5–20 L |
| Drain Port | Standard on GD120-R2 to GD120-R5 |
| Optional Accessories | VTP1/VTP2 Vertical Turbine Pumps |
| Origin | UK |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | GD120 |
| Pricing | Available Upon Request |
| Temperature Range Options | 0–120 °C (S5/S12/S18), –15–120 °C (S26/S38) |
| Temperature Stability (DIN 58966 @37 °C) | ±0.02 °C |
| Temperature Uniformity (@37 °C) | ±0.05 °C |
| Setpoint Resolution | 0.1 °C |
| Display | 4-digit, 13 mm LED |
| Pre-set Temperature Memory | 4 values |
| Dual-Point Calibration | Yes |
| Heating Power | 1.4 kW (240 V), 1.3 kW (115 V) |
| Pump Max Pressure | 270 mbar (water), Max Flow Rate: 17 L/min |
| Tubing Port ID/OD | 6/11 mm |
| Safety Features | Adjustable overtemperature cut-out, float-switch level protection |
| Electrical Supply | 230 V / 1.5 kW (50 Hz), 120 V / 1.4 kW (60 Hz) |
| Bath Volumes | 5 L (S5), 12 L (S12), 18 L (S18), 26 L (S26), 38 L (S38) |
| Top Opening Dimensions (L×W) | 150×150 mm (S5), 210×300 mm (S12), 390×300 mm (S18/S26), 580×300 mm (S38) |
| Minimum/Maximum Liquid Depth | 80/140 mm (S5/S12), 70/130 mm (S18), 120/180 mm (S26/S38) |
| Internal Tank Dimensions (L×W×H) | 300×150×150 mm (S5), 325×300×150 mm (S12), 505×300×150 mm (S18), 505×300×200 mm (S26), 690×300×200 mm (S38) |
| External Dimensions (L×W×H) | 325×175×175 mm (S5), 350×325×175 mm (S12), 530×325×225 mm (S18/S26), 720×325×225 mm (S38) |
| External Dimensions with Controller (L×W×H) | 325×175×355 mm (S5), 350×325×355 mm (S12), 530×325×405 mm (S18/S26), 720×325×405 mm (S38) |
| Optional Immersion Chillers | C1G (all models), C2G (S26 & S38) |
| Origin | UK |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | GR150-S/P |
| Pricing | Upon Request |
| Brand | Zhengxin Instrument Factory |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PFM2 |
| Price | USD 420 (FOB Jiangsu) |
| Usable Volume | Small-scale (≤500 mL) |
| Construction Material | 316 Stainless Steel |
| Operating Pressure | Low-pressure (up to 0.6 MPa gauge) |
| Vacuum Capability | ≤ −0.098 MPa (absolute) |
| Design Standard | ASME BPVC Section VIII Div. 1 compliant for low-pressure service |
| Brand | ORGANO |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | PR-FP-0120a-UT1 |
| Purified Water Grade | ASTM Type I / ISO 3696 Grade 1 |
| Resistivity | 18.2 MΩ·cm @ 25°C |
| Heavy Metals & Soluble Silica | <3 ng/L (Detection Limit) |
| TOC | Real-time online measurement, <5 ppb typical |
| Endotoxins | <0.001 EU/mL |
| Particles (>0.1 µm) | <1 particle/mL |
| Flow Rate | 0.016–2 L/min (via dedicated dispensing arm) |
| Daily Output Capacity | ≥45 L |
| Feed Water | Municipal tap water (pre-treated) |
| Brand | Organomation |
|---|---|
| Origin | USA |
| Model | 11801 |
| Heating Method | Dry-Block Heating |
| Temperature Range | 40–130 °C |
| Temperature Uniformity | ±0.5 °C |
| Sample Capacity | 96 positions |
| Gas Flow Rate | 0–25 LPM |
| Needle Material | Stainless Steel (2" × 19 gauge) |
| Compatible Formats | 96-well plates, 8-tube strips, deep-well plates |
| Construction | Laboratory-grade corrosion-resistant materials (optional acid-resistant coating available) |
| Brand | Organomation |
|---|---|
| Origin | USA |
| Model | Microvap Series (e.g., 11801, 11803) |
| Heating Method | Dry-block heating |
| Temperature Range | 40–130 °C |
| Temperature Stability | ±0.5 °C |
| Sample Format | 96-well microtiter plates |
| Gas Flow Rate | 0–30 LPM |
| Heating Power | 400 W |
| Certifications | UL Listed |
| Brand | Organomation |
|---|---|
| Origin | USA |
| Model | MULTIVAP Series |
| Heating Method | Water Bath |
| Temperature Range | Up to 99 °C |
| Temperature Stability | ±0.5 °C |
| Sample Tube Diameter | 10–22 mm |
| Gas Flow Rate | 0–30 L/min |
| Sample Positions | 100 |
| Heating Power | 1100 W |
| Brand | Organomation |
|---|---|
| Origin | USA |
| Model | N-EVAP 45-Position |
| Heating Method | Water Bath |
| Temperature Range | Ambient to 90 °C |
| Temperature Stability | ±0.5 °C |
| Tube Outer Diameter Range | 10–19 mm |
| Tube Inner Diameter Range | 10–29 mm |
| Gas Flow Rate | 0–30 LPM |
| Sample Capacity | 45 positions |
| Heating Power | 1400 W |
| Brand | Organomation |
|---|---|
| Origin | USA |
| Model | N-EVAP |
| Heating Method | Water Bath |
| Temperature Control Range | Ambient to 90 °C |
| Temperature Uniformity | ±2 °C (6–24 positions), ±0.5 °C (34 & 45 positions) |
| Sample Capacity | 6–45 positions |
| Tube Diameter Compatibility | 10–29 mm (standard), up to 56 mm (optional) |
| Gas Flow Rate | 0–10 L/min (6/12/24), 0–20 L/min (34), 0–30 L/min (45) |
| Input Gas Pressure | 30–150 psig |
| Output Gas Pressure | 0–30 psig |
| Nitrogen Consumption | ~330 mL/min per sample |
| Heating Power | 500–1400 W |
| Construction | Laboratory-grade stainless steel |
| Optional Configurations | Acid-resistant coating (RT), Dry-Block with aluminum beads (DA), PTFE-coated needles (T), Extended 6-inch needles (6), Pasteur pipette adapter (P), Heater-free configuration (O) |
| Brand | Organomation |
|---|---|
| Origin | USA |
| Model | N-EVAP Series |
| Heating Method | Water Bath |
| Temperature Range | 0–80 °C |
| Temperature Uniformity | ±2 °C |
| Sample Tube Diameter Capacity | Up to 29 mm |
| Gas Flow Rate | 0–10 L/min |
| Throughput Options | 12-position or 24-position configurations |
| Heating Power | 500–800 W |
| Brand | Organomation |
|---|---|
| Origin | USA |
| Model | N-EVAP (12-Position and 24-Position) |
| Heating Method | Water Bath |
| Temperature Range | 0–80 °C |
| Temperature Stability | ±2 °C |
| Tube Diameter Capacity | Up to 29 mm |
| Gas Flow Rate | 0–10 L/min |
| Sample Positions | 12 or 24 |
| Heating Power | 500–800 W |
| Brand | Organomation |
|---|---|
| Origin | USA |
| Heating Method | Water Bath |
| Temperature Range | 0–80 °C |
| Temperature Uniformity | ±2 °C |
| Sample Capacity | 12 or 24 positions |
| Tube Diameter Compatibility | Up to 29 mm |
| Gas Flow Rate | 0–10 L/min (adjustable per channel) |
| Heating Power | 500–800 W |
| Solvent Recovery Efficiency | ~98% |
| Gas Consumption | ~330 mL/min per sample |
| Construction | Laboratory-grade stainless steel and chemically resistant materials |
| Brand | Organomation |
|---|---|
| Origin | USA |
| Model | N-EVAP-12 |
| Catalog No. | KL-11155-JG |
| Heating Method | Water Bath |
| Temperature Range | 30°C–90°C |
| Temperature Stability | ±2°C |
| Tube Diameter Capacity | 0–29 mm |
| Gas Flow Rate | 0–5 L/min (330 mL/min per position) |
| Sample Positions | 12 |
| Heating Power | 500 W |
| Brand | Organomation |
|---|---|
| Origin | USA |
| Model | N-EVAP-12 |
| Catalog No. | KL-11155 |
| Heating Method | Water Bath |
| Temperature Range | 30°C–90°C |
| Temperature Stability | ±2°C |
| Sample Capacity | 12 positions |
| Tube Diameter Compatibility | 0–29 mm |
| Gas Flow Rate | 0–5 L/min (330 mL/min per sample) |
| Heating Power | 500 W |
| Brand | Organomation |
|---|---|
| Origin | USA |
| Model | N-EVAP-12 |
| Heating Method | Water Bath |
| Temperature Range | Up to 99 °C |
| Temperature Uniformity | ±1 °C |
| Sample Capacity | 12 positions |
| Tube Diameter Compatibility | 10–30 mm |
| Gas Flow Rate | 0–10 L/min |
| Input Pressure | 30–150 psig |
| Output Pressure | 0–30 psig |
| Power Rating | 800 W |
| Nitrogen Consumption | 330 mL/min per sample |
| Dimensions (W×D×H) | 33 × 28 × 79 cm |
| Brand | Organomation |
|---|---|
| Origin | USA |
| Model | N-EVAP-20 Automated |
| Heating Method | Water Bath |
| Temperature Range | 30–100 °C |
| Temperature Stability | ±0.5 °C |
| Sample Capacity | 20 positions |
| Tube Diameter Compatibility | 10–30 mm (standard), optional 30–54 mm |
| Nitrogen Flow Rate | 0–20 L/min |
| Heating Power | 800 W |
| Pressure Input Range | 0–30 psig |
| Actuation | Pneumatic cylinder with regulated output (30–160 psig) |
| Needle Material | Stainless steel, 4 in × 19 gauge (102 mm × 19 ga) |
| Safety Features | High-temperature cutoff switch, acid-resistant coating (optional #RT), dual nitrogen filtration, circuit breaker, covered safety guard |
| Brand | Organomation |
|---|---|
| Origin | USA |
| Model | N-EVAP-24 |
| Catalog No. | KL-11250-JG |
| Heating Method | Water Bath |
| Temperature Range | 30°C to 90°C |
| Temperature Stability | ±2°C |
| Tube Diameter Compatibility | 10–29 mm |
| Gas Flow Rate | 0–10 LPM (330 mL/min per position) |
| Sample Capacity | 24 positions |
| Heating Power | 800 W |
| Brand | Organomation |
|---|---|
| Origin | USA |
| Model | N-EVAP-112/24 |
| Heating Method | Water Bath |
| Temperature Range | Ambient to 99 °C |
| Temperature Stability | ±0.5 °C |
| Sample Capacity | 24 positions |
| Tube Diameter Compatibility | 10–29 mm |
| Gas Flow Rate | 0–15 L/min |
| Heating Power | 800 W |
| Brand | Organomation |
|---|---|
| Origin | USA |
| Model | N-EVAP-24 |
| Catalog No. | KL-11250 |
| Heating Method | Water Bath |
| Temperature Range | 30°C–90°C |
| Temperature Stability | ±2°C |
| Sample Tube Diameter | 10–29 mm |
| Gas Flow Rate | 0–10 LPM (330 mL/min per position) |
| Sample Capacity | 24 positions |
| Heating Power | 800 W |
| Brand | Organomation |
|---|---|
| Origin | USA |
| Model | N-EVAP-34 |
| Heating Method | Water Bath |
| Temperature Range | Ambient to 99 °C |
| Temperature Stability | ±2 °C |
| Sample Capacity | 34 positions |
| Tube Diameter Compatibility | 10–30 mm |
| Gas Flow Rate | 330 mL/min per channel |
| Heating Power | 800 W |
| Needle | Stainless Steel, 4" × 19 gauge (replaceable) |
| Control | Individual needle valve per channel |
| Compliance | Designed for GLP-compliant sample prep workflows |
| Brand | Organomation |
|---|---|
| Origin | USA |
| Product Line | N-EVAP / S-EVAP / MULTIVAP |
| Sample Capacity | 6–100 positions |
| Gas Medium | Nitrogen or compressed air |
| Heating Method | Precision water bath (S-EVAP: boiling solvent evaporation) |
| Solvent Recovery Rate | Up to 98% (S-EVAP model) |
| Gas Flow Control | Individual needle valve + flow meter (330 mL/min per sample) |
| Compatibility | Test tubes, centrifuge tubes, conical flasks |
| Construction | Laboratory-grade corrosion-resistant materials |
| Compliance | Designed for GLP-compliant sample preparation workflows in regulated environments |
| Brand | Organomation |
|---|---|
| Origin | USA |
| Model | N-VEAP-45 |
| Heating Method | Water Bath |
| Temperature Range | Up to 99 °C |
| Temperature Stability | ±0.5 °C |
| Sample Tube Diameter | 10–30 mm |
| Gas Input Pressure | 30–150 psig |
| Sample Positions | 45 |
| Heating Power | 500 W |
| Gas Flow Rate | 0–10 L/min |
| Nitrogen Consumption | 330 mL/min per sample |
| Dimensions (W×D×H) | 33×28×79 cm |
| Brand | Organomation |
|---|---|
| Origin | USA |
| Model | S-EVAP-RB Series Parallel Evaporator |
| Instrument Type | Automated Quantitative Concentrator |
| Temperature Range | 30–100 °C |
| Temperature Control Accuracy | ±2 °C |
| Solvent Bottle Capacity | 250 mL and 500 mL options |
| Safety Certifications | UL/cUL Listed |
| Compliance | ISO 14000-compatible operation |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | S1-N-EVAP |
| Pricing | Available Upon Request |
| Brand | Orient KOJI |
|---|---|
| Origin | Tianjin, China |
| Model | Cryo-77 |
| Temperature Range | 77 K to 500 K |
| Cooling Medium | Liquid Nitrogen |
| Optical Access | Quadruple Windows (NA = 3.0) |
| Standard Window Material | Fused Silica (UV–NIR Transmission) |
| Vacuum Chamber Diameter | 76 mm (3-inch) |
| Temperature Sensor | PT100 Platinum Resistance Thermometer |
| Control Method | Thermal Impedance Modulation + Resistive Heating |
| Sample Mounting | Electrical Feedthroughs (Ph-Br or Coaxial Cables), Powder & Thin-Film Fixtures Included |
| Compatibility | Hitachi F-4500/F-7000/F-4600/F-2700, Shimadzu RF Series, HORIBA FluoroMax-4/DeltaFLEX/FluoroLog-3, Edinburgh Instruments FLS920/FLS980/FLS1000 |
| Optional Configurations | Cryo-77Pro (80–800 K), Cryo-77Plus (Atmosphere-Sensing Integration), Magnetic Field-Compatible Versions, Custom Optical Coupling Kits |
| Brand | Drummond |
|---|---|
| Origin | USA |
| Model | Original Portable Pipet-Aid® |
| Power Source | Rechargeable Battery (2000 cycles per charge) |
| Aspiration Rate | 25 mL in 5 seconds (using 100 mL serological pipette) |
| Voltage | 220 V |
| Compliance | CE-marked for laboratory use |
| Accessories | Wall-mounted cradle, Tissue Culture Nosepiece |
| Brand | Ortoalresa |
|---|---|
| Origin | Spain |
| Model | Biocen 22 |
| Instrument Type | Benchtop Centrifuge |
| Speed Range | Up to 15,000 rpm |
| Max RCF | 21,885 × g |
| Capacity | 24 × 2 mL or 12 × 5 mL |
| Dimensions (W×D×H) | 276 × 390 × 272 mm |
| Noise Level | <60 dB(A) |
| Compliance | EN 61010-1, EN 61010-2-020, EN 61326-1, EN 61326-2-6, EU Directives 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC |