Common Laboratory Equipment
Filter
Showing 13921–13950 of 17607 results
| Brand | Tecan |
|---|---|
| Origin | Shanghai, China & Männedorf, Switzerland |
| Model | Fluent 480 / Fluent 780 / Fluent 1080 |
| Deck Capacity | 30 / 48 / 72 positions |
| Sample Throughput | 480 / 780 / 1080 samples per run |
| Dimensions | Not specified |
| Compliance | Designed for GLP/GMP environments |
| Brand | Tecan |
|---|---|
| Origin | Switzerland |
| Automation Level | Fully Automated |
| Platform | Freedom EVO® |
| SPE Mode | Positive Pressure (ppSPE) |
| Cartridge Compatibility | 1 mL, 3 mL, and 6 mL SPE columns |
| Maximum Throughput | 72 samples per run |
| Channel Configuration | 8-channel liquid handling arm |
| Extraction Format | Column-based SPE |
| Regulatory Alignment | Designed for GLP/GMP-compliant laboratories |
| Software Integration | FluentControl™ with audit trail and user access control |
| Compliance | Supports 21 CFR Part 11 requirements for electronic records and signatures |
| Brand | TECAN |
|---|---|
| Origin | Switzerland |
| Model | Freedom EVO® & Atoll MediaScout® |
| Configuration | Integrated Liquid Handling Platform with RoboColumn™ Array for Parallel Protein Purification |
| Compliance | Designed for GLP/GMP-aligned workflows, compatible with 21 CFR Part 11–enabled software environments |
| Sample Throughput | Up to 96 parallel protein purification runs per cycle |
| Minimum Fraction Volume | 25 µL |
| Column Format | SBS-standard 96-well footprint RoboColumn™ array (MiniColumn inner diameter: 5 mm |
| resin bed heights | 2.5 / 5 / 10 / 30 mm |
| corresponding resin volumes | 50 / 100 / 200 / 600 µL) |
| Flow Control Precision | Down to 16.2 cm/h linear velocity via Dilutor pump system |
| Detection Integration | Compatible with Tecan Infinite M200 Pro and other plate readers for automated A280 quantification |
| Brand | Tecan |
|---|---|
| Origin | Switzerland |
| Model Variants | EVOlyzer 100, EVOlyzer 150, EVOlyzer 200 |
| Deck Positions | 20 / 28 / 44 |
| Liquid Handling Range | 10–100 µL |
| Pipetting Accuracy | ±10% at 10 µL, ±2% at 100 µL, ±1.5% at 200 µL, ±1% at 1000 µL |
| Sample Throughput (per run) | 2–8 microplates |
| Dimensions (W×D×H) | 800 × 1520 × 910 mm |
| Brand | Tecan |
|---|---|
| Origin | USA |
| Model | M10-96 |
| Channel Configuration | 96-channel parallel processing |
| SPE Format | Column-based (1 mL, 3 mL, 6 mL cartridges) and 96-well plate-compatible |
| Flow Rate Control | 0.1–30 mL/min (adjustable via dual-range pressure regulation) |
| Sample Capacity | Up to 96 samples per run |
| Sample Load Volume | 0.05–2 mL per channel |
| Solvent Compatibility | Unlimited solvent types (including acetonitrile, methanol, ethyl acetate, dichloromethane, hexane, and aqueous buffers) |
| Wetted Materials | PTFE, polypropylene (PP) |
| Regulatory Compliance | Designed for GLP/GMP-aligned workflows |
| Brand | TECAN |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model No. | 253-0014 |
| Channel Count | Multi-channel |
| Extraction Format | Cartridge-based SPE |
| Flow Rate Control | 0.1–100 mL/min |
| Solvent Selection | Up to 11 independent solvent lines |
| Sample Capacity | 48 samples per run |
| Sample Loading Volume | ≤80 mL per sample |
| Wetted Materials | PTFE, Polypropylene (PP), Stainless Steel (316) |
| Brand | TECAN |
|---|---|
| Origin | USA |
| Model | 253-1160 |
| Channel Configuration | 96-channel parallel processing |
| SPE Format | Cartridge-based (1 mL columns) and 96-well plate compatible |
| Flow Rate Control | 0.1–60 mL/min (positive-pressure driven) |
| Solvent Selection | Up to 11 independent solvent channels |
| Sample Capacity | 1–96 samples per run |
| Sample Load Volume | 0.5–100 mL per sample |
| Wetted Materials | PTFE, polypropylene (PP), stainless steel (316 SS) |
| System Footprint | Compact benchtop design |
| Brand | Techin |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | TJYL-26 |
| Price | USD 9,100 (approx. based on ¥65,000 at 1 USD = ¥7.14) |
| Brand | TECHLEAD® |
|---|---|
| Manufacturer | Tailin Biotechnology Co., Ltd. |
| Origin | Zhejiang, China |
| Model | AST-300 |
| Type | Fully Automated Sterility Testing Incubation & Detection System |
| Regulatory Alignment | USP <1223>, EP 5.1.6, ChP 2020 <9201>, FDA 21 CFR Part 11 |
| Temperature Control Zones | Three independent incubation chambers (30–37 °C and 20–25 °C) |
| Detection Time | As low as 8 hours for positive identification |
| Detection Limit | ≤5 CFU per test unit |
| Microbial Coverage | Bacteria, yeasts, and molds |
| Data Integrity | Audit-trail enabled, electronic signature compliant, ALCOA+ principles implemented |
| Method Compatibility | Direct inoculation method |
| Brand | Techne |
|---|---|
| Origin | USA |
| Model | FB-08 / FB-08C |
| Temperature Range | 50–700 °C |
| Short-term Accuracy | ±0.2 °C at 50 °C, ±0.3 °C at 600 °C |
| Long-term Stability | ±0.5 °C across full range |
| Control | 3-term PID (FB-08) |
| Heating Medium | 15.8 kg Al₂O₃ powder |
| Air Supply | 127 L/min at 0.42 MPa |
| Heating Power | 3000 W |
| Chamber Dimensions (Ø × D) | 16.5 × 38.5 cm |
| External Dimensions (L × W × H) | 77 × 52 × 60 cm (FB-08), 87 × 51 × 60 cm (FB-08C) |
| Weight | 76 kg (FB-08), 84 kg (FB-08C) |
| Power Supply | 240 V, 50/60 Hz |
| Dead Bed Stability | ±0.010 °C for 3–6 min after shutdown |
| Brand | Techne |
|---|---|
| Origin | USA |
| Model | IFB-121 |
| Temperature Range | 50–600 °C |
| Temperature Accuracy | ±5.0 °C |
| Temperature Sensor | Type K Thermocouple |
| Internal Dimensions (Dia × Depth, cm) | 45 × 70 (IFB-121), 45 × 120 (IFB-131) |
| Air Flow Rate (at 0.2 MPa) | 300 L/min |
| Time to 450 °C | 195 min (IFB-121), 165 min (IFB-131) |
| Time to 600 °C | 330 min (IFB-121), 195 min (IFB-131) |
| External Dimensions (L × W × H, cm) | 134 × 85 × 113 (IFB-121), 184 × 85 × 113 (IFB-131) |
| Voltage | 480 V, 3-phase |
| Power Rating | 12 kW (IFB-121), 18 kW (IFB-131) |
| Empty Weight | 226 kg (IFB-121), 330 kg (IFB-131) |
| Weight with Al₂O₃ Media | 500 kg (IFB-121), 700 kg (IFB-131) |
| Brand | Techne |
|---|---|
| Origin | USA |
| Model | IFB-52 |
| Temperature Range | 50–600 °C |
| Temperature Uniformity | ±1.0 °C |
| Heating Power | 25 kW·h (operational energy consumption) |
| Chamber Dimensions (D × H) | 25.9 cm × 66 cm |
| External Dimensions (L × W × H) | 104 cm × 61 cm × 54 cm |
| Voltage | 480 V, 3-phase |
| Weight (empty) | 84 kg |
| Weight (with alumina medium) | 200 kg |
| Air Inlet Pressure | 0.2 MPa |
| Air Flow Rate | 160 L/min |
| Control System | 3-term PID with K-type thermocouple |
| Brand | Techne |
|---|---|
| Origin | United Kingdom |
| Model | RB-5A |
| Temperature Range | −20 °C to 100 °C |
| Minimum Achievable Temperature (at 20 °C ambient) | −20 °C |
| Cooling Power at 20 °C | 145 W |
| Cooling Power at 0 °C | 145 W |
| Cooling Power at −10 °C | 110 W |
| External Dimensions (L×W×H) | 430×250×566 mm |
| Internal Dimensions (L×W×H) | 192×151×200 mm |
| Max Liquid Level to Top | 65 mm |
| Working Height Range | 180/135 mm |
| Max/Min Working Volume | 7.0/5.5 L |
| Flow Rate (Pressure) | 20 L/min |
| Flow Rate (Suction) | 15 L/min |
| Shipping Weight | 31 kg |
| Controller Included | Yes |
| Fluid Compatibility | Water/glycol/alcohol mixtures (e.g., 40/40/20 v/v/v for −35 °C operation) |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | SBL-2D |
| Pricing | Available Upon Request |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | F7805 |
| Temperature Range | 50–600 °C |
| Temp. Uniformity at 100 °C | ±0.4 °C (SBS-4) / ±0.2 °C (SBL-2D) |
| Heating Time (20→600 °C) | 90 min (SBS-4) / 105 min (SBL-2D) |
| Cooling Time (600→200 °C) | 330 min |
| Max. Air Inlet Pressure | 1.03 bar (15 psi) |
| Max. Air Flow Rate | 85 L/min (SBS-4) / 57 L/min (SBL-2D) |
| Al₂O₃ Media Required | 9 kg (SBS-4) / 32 kg (SBL-2D) |
| Chamber Dimensions (Ø × D) | 17.8 × 14 cm (SBS-4) / 22.8 × 35 cm (SBL-2D) |
| External Dimensions (Ø × H) | 34 × 47 cm (SBS-4) / 39 × 70 cm (SBL-2D) |
| Power Supply | 240 V, 6.2 A (SBS-4) / 240 V, 17 A (SBL-2D) |
| Power Consumption | 1.5 kW (SBS-4) |
| Weight | 24 kg (SBS-4) / 49 kg (SBL-2D) |
| TC-9D Controller Range | 0–620 °C |
| TC-9D Resolution | 1 °C |
| TC-9D External Dimensions (W×H×D) | 20.3 × 30.5 × 19.1 cm |
| TC-9D Power Input | 85–250 V AC, 4000 W |
| Includes | K-type thermocouple (2.4 m), rotameter, dual programmable setpoints, Celsius/Fahrenheit toggle, single-point calibration, stainless steel sand bath vessel, alumina fluidization medium (Al₂O₃), overflow guard ring, and compatible mesh basket (F7805 for SBL-2D) |
| Brand | Technobis |
|---|---|
| Origin | Netherlands |
| Model | Crystal16 |
| Reactor Volume | 0.5–1 mL per channel |
| Number of Channels | 16 |
| Temperature Control Zones | 4 independent modules |
| Stirring Modes | top-mounted overhead stirrer and bottom magnetic stirring |
| In-situ Turbidity Monitoring | non-invasive, channel-specific optical turbidity detection |
| Software | integrated control and analysis suite compliant with GLP data integrity principles |
| Regulatory Alignment | supports 21 CFR Part 11 audit trail requirements for electronic records |
| Brand | Technobis |
|---|---|
| Origin | Netherlands |
| Model | CrystalBreeder |
| Reaction Volume per Vial | 0.05–0.2 mL |
| Total Channels | 32 (8 modules × 4 vials) |
| Temperature Control | Programmable, ±0.1 °C accuracy |
| Stirring | Top-mounted paddle and bottom-mounted magnetic stirring (interchangeable) |
| In-situ Monitoring | Non-invasive turbidity detection per channel |
| Optional Modes | Vapor diffusion, evaporation crystallization |
| Compliance | Designed for GLP-compliant early-phase pharmaceutical development |
| Brand | Technobis |
|---|---|
| Origin | Netherlands |
| Model | Crystalline |
| Configuration Options | Crystalline SE (turbidity), Crystalline PV (in-situ particle size), Crystalline RR (in-situ Raman) |
| Reactor Count | 8 independent channels |
| Reaction Volume per Channel | 2.5–5 mL |
| Stirring | Top-mounted magnetic or mechanical stirring |
| Integration | Modular benchtop platform for process analytical technology (PAT)-enabled crystallization development |
| Brand | Technobis |
|---|---|
| Origin | Netherlands |
| Model | ReactALL |
| Temperature Range | −25 to 150 °C |
| Temperature Control Accuracy | ±0.5 °C |
| Number of Reaction Units | 5 |
| Vessel Capacity | 16 mL vials |
| Sample Throughput per Unit | Up to 18 samples |
| Fluid Handling | Non-puncturing, pump-free, wide-bore fluidic path |
| Stirring Mechanism | CFD-optimized helical impeller |
| Detection | Integrated color camera + turbidity module |
| Interface | Open API for robotic integration |
| Compliance | Designed for GLP-compliant workflow execution |
| Brand | Ted Pella |
|---|---|
| Origin | USA |
| Model | 12856-230 |
| Temperature Range | Ambient to 70 °C |
| Capacity | 40 microscope slides |
| Control | Digital PID with LED display |
| Footprint | 35.5 cm × 35.5 cm × 25.5 cm (W × D × H) |
| Heating Surface | Stepped-tiered aluminum plate |
| Brand | Ted Pella |
|---|---|
| Origin | USA |
| Model | 12857-220 |
| Temperature Range | Ambient to 70 °C |
| Capacity | 24 microscope slides |
| Surface Finish | Black anodized aluminum |
| Dimensions (W × D × H) | 25.4 cm × 17.8 cm × 7.6 cm |
| Display | LED digital readout |
| Control | Precise digital thermostatic regulation |
| Brand | Ted Pella |
|---|---|
| Origin | USA |
| Model | 12858-220 |
| Temperature Range | Ambient to 70 °C |
| Capacity | 56 microscope slides |
| Benchtop Dimensions | 63.5 × 20.3 × 190 mm |
| Surface Finish | Black anodized aluminum |
| Import Status | Imported equipment |
| Distribution Type | Authorized distributor |
| Brand | Ted Pella |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | 208HR |
| Target Material | Gold (Au) |
| Target Diameter | φ58 mm |
| Control Method | Programmable Digital Control |
| Chamber Dimensions | Ø120 mm × H120 mm |
| Sample Stage Capacity | 12 SEM stubs |
| Stage Height Adjustment Range | 50 mm |
| Sputtering Gas | Air or Argon |
| Base Pressure | 1 × 10⁻⁵ mbar |
| Pumping Speed | 300 L/min at 0.1 mbar |
| Pumpdown Time | ≤60 s to 1 × 10⁻³ mbar |
| Operating Pressure Range | 0.2–0.005 mbar |
| Deposition Rate Tunability | 0.002–1.0 nm/s |
| Current Selection | 20/40/60/80 mA (digitally selectable) |
| Magnetron Type | Low-Voltage Planar Magnetron |
| Safety Interlock | Yes |
| Vacuum Gauge | Analog + digital readout |
| Optional Thickness Monitor | MTM-20 Quartz Crystal Microbalance |
| Brand | Ted Pella |
|---|---|
| Origin | USA |
| Model | 28151 |
| Capacity | 2.5 gallons (9.46 L) |
| Dimensions | 40 cm W × 38.1 cm D × 45.7 cm H (16" × 15" × 18") |
| Weight | 20.9 kg (46 lbs) |
| Temperature Range | Ambient to 72°C |
| Spigot Type | Heated, non-drip |
| Interior Material | Stainless steel |
| Lid | Clear, contamination-resistant viewing window |
| Control System | Integrated microprocessor-based temperature controller |
| Brand | Ted Pella |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 28154 |
| Pricing | Upon Request |
| Operating Temperatures | Low: ~27°C (80°F), High: ~32°C (90°F) |
| Dimensions (with tray) | 15.2 cm W × 28.5 cm D × 20.3 cm H |
| Brand | Ted Pella |
|---|---|
| Origin | USA |
| Model | 28154-230 |
| Operating Temperature Range | Low ~27°C (81°F), High ~32°C (90°F) |
| Dimensions (W×D×H, including tray) | 15.2 × 28.5 × 20.3 cm |
| Heating Surface | Grooved, magnetically secured heated platform with removable wax collection tray |
| Disposable Liners | Included (plastic, pre-sterilized, single-use) |
| Compatibility | All standard biopsy and mega-sized tissue cassettes (e.g., Sakura, Leica, Thermo Fisher formats) |
| Brand | Ted Pella |
|---|---|
| Origin | USA |
| Model | 28156 |
| Overall Dimensions | 35 W × 35 D × 11.4 H cm |
| Interior Basin | 25.4 W × 16.5 D × 5.1 H cm |
| Max Operating Temperature | 103°F (39.4°C) |
| Temp Accuracy | ±1°C |
| Net Weight | 8.5 kg |
| LED Illumination | Side-mounted, glare-free, switchable |
| Temperature Probe | Stainless steel, flip-down, thermostatic auto-shutoff |
| Brand | Ted Pella |
|---|---|
| Origin | USA |
| Model | 28156-230 |
| Instrument Type | Constant-Temperature Water Bath |
| Circulation Type | Internal Circulation |
| Temperature Control | Heating-Only |
| Bath Volume | 5 L |
| Temperature Range | 0–99 °C |
| Temperature Stability | ±1 °C |
| Max Operating Temperature | 75 °C ±1 °C |
| Basin Dimensions (Interior) | 25.4 × 16.5 × 5.1 cm |
| Overall Dimensions | 35 × 35 × 11.4 cm |
| Net Weight | 8.5 kg |
| Brand | Ted Pella |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 650 |
| Instrument Type | Precision Low-Speed Diamond Wafering Saw |
| Blade Speed | 0–250 RPM |
| Maximum Blade Diameter | 175 mm |
| Sample Max Diameter | 70 mm |
| Sample Weight Capacity | 0–2000 g |
| Sample Mounting Diameter | 12.7 mm |
| Fine Feed Range | 0–25 mm (0.01 mm increments) |
| Coolant Reservoir Volume | 1200 mL |
| Power Supply | 220 VAC, 50/60 Hz |
| Construction | Cast Aluminum Housing |
| Drive System | Belt-Driven |
| Safety | Auto-Motor Stop on Obstruction |
| Compatible Coolants | Aqueous and Oil-Based |
| Dual Cutting Modes | Precision & Rough |
| Brand | Ted Pella |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 812-300 |
| Instrument Type | Precision Manual Cutting Machine |
| Operating Speed Range | 400–3400 rpm |
| Compatible Blade Sizes | 4" and 5" diamond wafering blades |
| Worktable Dimensions | 6" × 10" (152 mm × 254 mm) |
| Construction Material | Cross-linked polyethylene (corrosion-resistant, high-impact) |
| Standard Accessories | One 4" diamond blade, blade truing block, water-soluble coolant |