Environmental Monitoring Instruments
Filter
Showing 8221–8250 of 8960 results
| Brand | Turner Designs |
|---|---|
| Origin | USA |
| Model | C6p |
| Instrument Type | Online Water Quality Analyzer |
| Detection Parameters | Chlorophyll-a, Phycocyanin (Cyanobacteria), Oil-in-Water (Crude & Refined), Turbidity, Rhodamine WT, Fluorescein |
| Housing Material | Polyoxymethylene (POM) |
| Max Operating Depth | 600 m |
| Temperature Range | –2 to 50 °C |
| Power Supply | 8–30 VDC |
| Power Consumption | ≤5 W |
| Data Storage Capacity | >480,000 records |
| Minimum Sampling Interval | 1 s |
| Output | ASCII via RS-232 |
| Ingress Protection | IP68 |
| Dimensions | 685.75 mm (L) × 346 mm (Ø) |
| Weight (air) | 2.54 kg |
| Built-in Temperature Sensor | Yes |
| Optional Depth Sensor | Yes |
| Anti-fouling System | Copper anti-fouling band + motorized mechanical cleaning brush |
| Calibration Standards Available | Yes (for all standard fluorophores and turbidity) |
| Brand | Turner Designs |
|---|---|
| Origin | USA |
| Model | C7 CDOM |
| Instrument Type | Online Water Quality Analyzer |
| Measured Parameter | Colored Dissolved Organic Matter (CDOM) |
| Detection Principle | UV-Excited Fluorescence |
| Excitation Wavelength | ~370 nm (broadband UV) |
| Emission Detection | Blue-region fluorescence (~450 nm) |
| Output Signal | Analog (4–20 mA) and/or Digital (RS-485/Modbus) |
| Operating Temperature | 0–40 °C |
| Pressure Rating | 0–10 bar |
| Cable Length | Standard 10 m (customizable) |
| Material | 316 Stainless Steel Housing, Sapphire Optical Window |
| Compliance | IP68, CE, RoHS |
| Brand | Turner Designs |
|---|---|
| Origin | USA |
| Model | C7 |
| Output Signal | 0–5 VDC |
| Operating Voltage | 3–15 VDC |
| Power Consumption | < 300 mW |
| Dimensions | 14.48 × 2.23 cm |
| Weight | 160 g |
| Depth Rating | 600 m |
| Temperature Range (Ambient) | 0–5 °C |
| Temperature Range (Water) | −2–50 °C |
| Turbidity Interference Rejection | Yes |
| Linear Correlation Coefficient (R²) | ≥ 0.99 |
| Detection Limits & Ranges | Chlorophyll a: 0.025–500 µg/L |
| Cyanobacteria | 150–150,000 cells/mL |
| Rhodamine WT | 0.01–1000 ppb |
| Fluorescein | 0.01–500 ppb |
| Crude Oil (quinine sulfate equivalent) | 0.2–2700 ppb |
| Refined Oil (1,5-naphthalenedisulfonic acid disodium salt) | 2–10,000 ppb |
| CDOM (quinine sulfate) | 0.15–1250 ppb |
| CDOM (quinine bisulfate) | 0.5–5000 ppb |
| Fluorescent Whitening Agents (quinine sulfate) | 0.6–15,000 ppb |
| Turbidity | 0.05–3000 NTU |
| Brand | Turner Designs |
|---|---|
| Origin | USA |
| Model | C7 oil |
| Instrument Type | Portable |
| Measurement Principle | UV Fluorescence Spectrophotometry |
| Measurement Range | 0–2700 ppb (crude oil), 0–10,000 ppb (refined oil) |
| Detection Limit | 0.2 ppb (crude), 2 ppb (refined) |
| Accuracy | ±0.1 ppb |
| Resolution | 0.01 ppb |
| Measurement Frequency | 1 Hz |
| Linearity | R² ≥ 0.99 |
| Dimensions | 14.48 × 2.23 cm |
| Weight | 160 g |
| Operating Temperature | Ambient 0–50 °C, Water –2–50 °C |
| Depth Rating | 600 m |
| Output Signal | 0–5 VDC |
| Supply Voltage | 3–15 VDC |
| Power Consumption | <300 mW |
| Brand | Turner Designs |
|---|---|
| Origin | USA |
| Model | Cyclops-7 |
| Instrument Type | Online Water Quality Analyzer |
| Measured Parameters | Turbidity, Chlorophyll-a, Rhodamine WT, Fluorescein, Phycocyanin, Phycoerythrin, Total Cyanobacteria, Hydrocarbon (Oil-in-Water) |
| Detection Limits | Chlorophyll-a: 0.03 µg/L |
| Rhodamine WT/Fluorescein | 0.04 ppb |
| Cyanobacteria | 150 cells/mL |
| Oil-in-Water | 0.1 ppm |
| Measurement Ranges (selectable sensitivity) | Chlorophyll-a: 0–5 / 0–50 / 0–500 µg/L |
| Rhodamine WT/Fluorescein | 0–10 / 0–100 / 0–1000 µg/L |
| Cyanobacteria | 0–20,000 / 0–200,000 / 0–2,000,000 cells/mL |
| Oil-in-Water | 0–1000 ppm |
| Linearity | R² ≥ 0.99 |
| Output Signal | 0–5 VDC |
| Operating Voltage | 3–15 VDC |
| Power Consumption | <300 mW |
| Brand | Turner Designs |
|---|---|
| Origin | USA |
| Model | C7F |
| Instrument Type | Online Analyzer |
| Measurement Principle | Fluorescence Spectrophotometry |
| Measurement Range | 0–1,500 ppb (as hydrocarbon) |
| Detection Limit | 0.2 ppb |
| Power Consumption | <300 mW |
| Output | Real-time Analog (4–20 mA or 0–5 V) |
| Form Factor | Compact, Submersible Sensor Module |
| Brand | Turner Designs |
|---|---|
| Origin | USA |
| Model | Cyclops-7F |
| Instrument Type | Portable |
| Measurement Principle | UV-Induced Fluorescence (PAH-Specific) |
| Measurement Range | 0–2700 ppb (as naphthalene or equivalent PAH standard) |
| Detection Limit | 0.2 ppb |
| Accuracy | ±0.01% FS (Full Scale) |
| Resolution | 0.2 ppb |
| Sampling Frequency | 1 Hz |
| Housing Options | Titanium alloy or high-performance polymer (for corrosion/salinity resistance) |
| Brand | Turner Designs |
|---|---|
| Origin | USA |
| Model | FluoroSense |
| Detection Principle | In-situ LED-induced fluorescence |
| Linear Range | 0–199 µg/L for both chlorophyll a and phycocyanin |
| Resolution | 1 µg/L |
| Operating Temperature | 5–40 °C |
| Warm-up Time | None |
| Light Source | High-stability blue LED (λ~470 nm) |
| Detector | Silicon photodiode |
| Power Supply | Two AA batteries |
| Weight | 120 g |
| Dimensions | 22.6 × 5.1 × 4.5 cm |
| IP Rating | IP67 (dust-tight and submersible to 1 m for 30 min) |
| Sample Interface | Direct immersion probe with integrated optical path |
| Brand | Turner Designs |
|---|---|
| Origin | USA |
| Model | TD500D |
| Instrument Type | Portable |
| Measurement Principle | UV Fluorescence Spectrophotometry |
| Detection Range (Channel A) | 0.05–50 ppm |
| Detection Range (Channel B) | 0–1000 ppm |
| LOD (Channel A) | <50 ppb |
| LOD (Channel B) | <1 ppm |
| Accuracy | ±2% of full scale |
| Repeatability | ±2% of full scale |
| Sensitivity | <1 ppm for most hydrocarbons |
| Calibration | Single-point + blank |
| Warm-up Time | 5 s |
| Response Time | 5 s |
| Measurement Time | <4 min per sample |
| Dimensions | 4.45 × 8.9 × 18.4 cm |
| Weight | 0.4 kg |
| Enclosure Material | Non-metallic |
| IP Rating | IP67 |
| Operating Temperature | 5–40 °C |
| Compatible Solvents | n-Hexane, Vertrel XF, AK-225, Xylene, Freon, Horiba solvents |
| Sample Vessels | Micro-cuvettes (API gravity <45) or 8-mm tubes (API gravity >45) |
| Power Supply | 4 × AAA batteries (>1000 measurements per set) |
| Auto-power-off | After 3 min idle |
| Display | LCD with status indicators |
| Alarms | Low battery, circuit fault, high blank |
| Compliance | ISO 9001:2000, CE-marked |
| Brand | Turner Designs |
|---|---|
| Origin | USA |
| Model | Trilogy |
| Application | Laboratory-based chlorophyll a and algae analysis |
| Measurement Principles | Fluorescence (excitation/emission), Absorbance (UV-Vis), Turbidity (860 nm IR LED, ISO 7027 compliant) |
| Detection Limits | 0.02 µg/L Chl a, 0.02 ppb Rhodamine WT, 0.05 NTU turbidity |
| Range | 0–1,000 ppb Rhodamine WT |
| Linearity | R² ≥ 0.99 (fluorescence & turbidity) |
| Accuracy | ±0.7% absorbance |
| Precision | <0.5% at 1 A |
| Calibration Storage | 18 named calibration curves |
| Software | Spreadsheet Interface Software (real-time display, Excel export) |
| Regulatory Alignment | EPA Method 445.0 compliant for extracted chlorophyll a quantification |
| Compliance | ISO 7027 (turbidity), GLP-ready data handling |
| Brand | Turner Designs |
|---|---|
| Origin | USA |
| Model | Trilogy |
| Instrument Type | Benchtop Laboratory Analyzer |
| Measurement Principle | Fluorescence Spectrophotometry |
| Detection Range | 0–2,000 ppb (crude oil in water, quinine sulfate calibration) |
| Limit of Detection (LOD) | 0.2 ppb (crude oil) / 0.25 ppb (refined oil, naphthalene calibration) |
| Accuracy | Linear response across full dynamic range |
| Resolution | 0.2 ppb |
| Operation Mode | Manual sample introduction and measurement |
| Brand | Tianwei Environment (TW) |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | TW-BF1 |
| Instrument Category | Portable/Short-Term Meteorological Station |
| Spectral Range | 280–3000 nm |
| Response Time (95%) | 13 s |
| Zero Offset (Thermal Radiation) | ±10 W/m² |
| Zero Offset (Temperature Variation) | ±3 W/m² |
| Nonlinearity | ±1% |
| Stability (Annual Sensitivity Drift) | ±2% |
| Directional (Cosine) Response Error | ≤±5% at 30° solar elevation |
| Spectral Error | ±3% |
| Temperature Response (−10 to +40 °C) | ±3% |
| Tilt Error | ±1% |
| Sensitivity | 7–14 µV/(W·m⁻²) |
| Internal Resistance | ≤800 Ω |
| Operating Temperature | −40 to +85 °C |
| Operating Humidity | 5–90% RH |
| Power Consumption | 1.75 W |
| Rechargeable Lithium Battery | 12,000 mAh, ≥50 h runtime with battery level indication |
| Data Storage Capacity | ≥500,000 records |
| Deployment Time | ≤2 minutes by single operator |
| Weight | ≤5 kg |
| Communication Interfaces | GPRS, Bluetooth 5.0, RS-485-to-USB converter |
| Compliance | ISO 9060:2018 (Class C, First Class), WMO CIMO Guide (2022), GB/T 19565–2017 |
| Brand | Tianwei Environmental (TW) |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | TW-BF1 |
| Power Consumption | 1.75 W |
| Battery Capacity | 12,000 mAh (≥50 h runtime) |
| Spectral Range | 280–3000 nm |
| Response Time (95%) | 13 s |
| Zero Offset (Thermal) | ±10 W/m² |
| Zero Offset (Temperature) | ±3 W/m² |
| Nonlinearity | ±1% |
| Stability (1 year) | ±2% |
| Cosine Response Error | ≤±5% at 30° solar elevation |
| Directional Response Error | ±18 W/m² |
| Spectral Error | ±3% |
| Temperature Response (−10 to +40 °C) | ±3% |
| Tilt Error | ±1% |
| Sensitivity | 7–14 µV/(W·m⁻²) |
| Internal Resistance | ≤800 Ω |
| Operating Temperature | −40 to +85 °C |
| Operating Humidity | 5–90% RH |
| Data Storage Capacity | ≥500,000 records |
| Weight | ≤5 kg |
| Deployment Time | ≤2 min (single operator) |
| Compliance | ISO 9060:2018 (First Class), WMO CIMO Guide, GB/T 19565–2017 |
| Brand | Tianwei Environmental (TW) |
|---|---|
| Origin | Shandong, China |
| Manufacturer | Yes |
| Model | TW-FZ3 |
| Measurement Principle | Asymmetric Capacitive Collector with Gerdien Tube Design |
| Negative Ion Range | 0–500,000 ions/cm³ (typical ambient range) |
| Resolution | 1 ion/cm³ |
| Accuracy | ±10% of reading (calibrated against NIST-traceable reference ion generator) |
| Temperature | −40°C to +60°C (±0.3°C) |
| Humidity | 0–100% RH (±0.3% RH, capacitive sensor) |
| Wind Direction | 0–360° (±2°, ultrasonic anemometer) |
| PM2.5 | 0–1000 µg/m³ (±10%, optical scattering) |
| Noise | 30–120 dB(A) (±1.5 dB, condenser microphone) |
| Oxygen Concentration | 0–100% vol (±3% vol, electrochemical sensor) |
| Data Storage | Local SD card or embedded flash — 1 year of raw 1-min interval data |
| Communication | GPRS / LTE Cat-1 / Fiber-optic (TCP/IP) |
| Power Supply | 220 VAC ±10% or optional solar + battery (12 VDC nominal) |
| Display | 2 m × 1 m P10 monochrome LED matrix (36 modules, 32 cm × 16 cm each) |
| Structural Frame | Dual carbon-steel uprights, flanged modular assembly, rated for Typhoon Level 15 (≥45 m/s) |
| Enclosure Rating | IP65 |
| Compliance | Meets GB/T 18801–2022 (Air Ion Detector General Requirements), HJ 93–2013 (Ambient Air Particulate Matter Monitoring), and supports HJ 212–2017 (Data Transmission Protocol for Environmental Monitoring) |
| Brand | Tianwei Environmental (TW) |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | TW-JS1S |
| Power Supply | DC 10–30 V |
| Accuracy | ±0.5 cm or ±1 cm (full-scale uniform accuracy) |
| Resolution | 0.5 cm / 1 cm |
| Measuring Section Lengths | 50 cm or 80 cm (modular, unlimited sections) |
| Host Enclosure IP Rating | IP54 |
| Sensor Section IP Rating | IP68 |
| Communication Interfaces | RS485, 4G, 4–20 mA, 0–5 V, 0–10 V |
| Operating Modes | Water Depth Mode / Air Gap Mode / Tilt Compensation Mode |
| Average Power Consumption | 1 W (host), 0.05 W per section |
| Relay Outputs | 2 × 250 VAC / 30 VDC @ 3 A |
| Data Upload Interval | Configurable from 30 s to 1000 s |
| Mounting | Wall-mounted (86.2 mm mounting hole spacing, Ø10 mm holes) |
| LED Display | 102 cm × 22 cm dual-color (red/green), 16×96 dot matrix, vertical scrolling text |
| Acoustic-Optical-Voice Alarm Module | RS485-controlled, fixed voice message “Current water level is high—drive with caution”, triple alert cycle at 5 s intervals |
| Solar/AC Dual Power Option | Optional factory-configured hybrid power system with battery backup |
| Remote Configuration | Bluetooth-enabled mobile app (non-contact parameter setup) |
| Brand | Tianwei Environmental (TW) |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | OEM/ODM Producer |
| Country of Origin | China |
| Model | TW-PQX7 |
| Instrument Type | Portable Weather Station |
| Wind Speed Range | 0–60 m/s (±0.1 m/s + 0.01V) |
| Wind Direction Range | 0–360° (±2°) |
| Air Temperature Range | −40–80 °C (±0.3 °C at 25 °C) |
| Relative Humidity Range | 0–100 %RH (±3 %RH within 20–80 %RH) |
| Atmospheric Pressure Range | 300–1100 hPa (±0.25 %) |
| Illuminance Range | 0–157286 lux (<±3 %) |
| Optical Rainfall Rate Range | 0–4 mm/min (≤±4 %) |
| Data Storage Capacity | ≥500,000 records |
| Power Consumption | 1.75 W |
| Battery | 12,000 mAh Li-ion, ≥32 h runtime |
| Total Weight | ≤5 kg |
| Deployment Time | ≤2 min (single operator) |
| IP Rating | ≥IP65 |
| Sensor Housing Material | Imported ABS (salt-fog resistant) |
| Display | 7-inch Android touchscreen |
| Mounting | Adjustable aluminum telescopic mast |
| Enclosure | Shock-absorbing pull-handle case |
| Brand | Tianwei Environmental (TW) |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | TW-WQX12 |
| Power Consumption | 0.84 W |
| Communication Interface | RS485 (MODBUS RTU standard), optional RS232 / USB / Ethernet / Wireless (1-min minimum transmission interval) |
| Housing Material | UV-stabilized ASA engineering plastic |
| Mounting | Flange-based fixed installation |
| Certifications | Compliant with GB/T 35227–2017 (Meteorological Instruments – General Requirements), RoHS Directive 2011/65/EU, CE marking for EMC and LVD |
| Brand | Shandong Tianwei Environment (TW) |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | TW-WQX6 |
| Price | USD 780 (FOB Qingdao) |
| Communication | RS485 (MODBUS RTU), optional RS232/USB/Ethernet/Wireless (GPRS/LTE, min. 1-min interval) |
| Housing Material | UV-stabilized ASA engineering plastic |
| Mounting | Flange base with north indicator |
| Compliance | IP66, RoHS, CE-marked for industrial environmental use |
| Sensor Architecture | Solid-state, no moving parts, maintenance-free design |
| Origin | Jiangsu, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | TWA-300 |
| Pricing | Available Upon Request |
| Origin | Jiangsu, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | TWA-300HP |
| Pricing | Upon Request |
| Pump Pressure | >13,000 Pa |
| Flow Range | 20–500 mL/min |
| Flow Accuracy | ±5% FS |
| Flow Stability | ≤5% |
| Timer Accuracy | ≤±0.1% |
| Operating Temperature | −25 to +45 °C |
| Power Supply | AC 220 V ±10%, 50 Hz / Rechargeable Ni-MH Battery (≥12 h continuous operation) |
| Weight | ≤0.5 kg |
| Dimensions | 100 × 50 × 110 mm |
| Anti-Backflow Protection | Integrated liquid and particulate backflow prevention valve |
| Sampling Modes | Time-weighted average (TWA), short-term exposure limit (STEL), and fixed-duration programmable sampling |
| Origin | Jiangsu, China |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic (China) |
| Model | TWA-300T |
| Pricing | Upon Request |
| Max Negative Pressure | ≥2500 Pa |
| Rated Load Flow | ≥1.5 L/min @ 40 mmHg |
| Flow Range | 20–500 mL/min or 50–500 mL/min (user-selectable) |
| Flow Accuracy | Class 2.5 |
| Flow Stability | ≤±5% |
| Timer Accuracy | ≤±0.1% |
| Operating Temperature | −5 to 40 °C |
| Power Supply | 6 × AA Ni-MH rechargeable batteries |
| Dimensions | 137 × 88 × 45 mm |
| Weight | 0.5 kg (including batteries) |
| Brand | Tydex |
|---|---|
| Origin | Russia |
| Model | GC-1P / GC-1T / GC-1D |
| Detector Type | Pneumatic Thermal Terahertz Detector |
| Wavelength Range | 0.3–8000 µm |
| NEP @ 15 Hz | 0.8–1.4 × 10⁻¹⁰ W/Hz¹ᐟ² |
| Responsivity @ 15 Hz | 1.0–1.5 × 10⁵ V/W |
| Aperture Diameter | 6.0 mm |
| Input Cone Diameter | 11.0 mm |
| Max Incident Power | <10 µW |
| Optimal Modulation Frequency | 15 ± 5 Hz |
| Window Material (GC-1P) | HDPE |
| Window Material (GC-1T) | TPX (Polymethylpentene) |
| Window Material (GC-1D) | Diamond |
| Dimensions (L×W×H) | 126 × 45 × 87 mm |
| Weight | 0.8 kg |
| Compliance | CE-marked, ISO/IEC 17025 traceable calibration available upon request |
| Origin | Jiangsu, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | TYQ-1000 |
| Pricing | Available Upon Request |
| Flow Ranges | 0.1–1.5 L/min, 0.1–3 L/min, 1–5 L/min |
| Flow Accuracy | ≤ ±5% |
| Timing Accuracy | ≤ ±1% |
| Maximum Vacuum | ≥25 kPa |
| Power Supply | 10 V DC / 220 V AC, 50 Hz |
| Battery Option | Rechargeable Ni-Cd pack with auto-charging circuit |
| Operating Temperature | −10 to +40 °C |
| Relative Humidity | ≤85% RH |
| Noise Level | ≤60 dB(A) |
| Dimensions | 200 × 160 × 140 mm |
| Weight | Approx. 1.8 kg |
| Display | Backlit LCD with real-time parameter readout |
| Control System | Embedded microcontroller (U.S.-sourced MCU) |
| Motor Type | High-efficiency imported coreless cup motor |
| Auto-Shutdown | User-configurable idle timeout (1–3 s) and no-operation shutdown |
| Data Retention | Last sampling session parameters retained in non-volatile memory |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Sentine Phosphate Online Monitor |
| Instrument Type | Phosphate (Orthophosphate) Analyzer |
| Accuracy | ±2% of reading or full scale |
| Resolution | 0.001 mg/L |
| Repeatability | ±2% of reading or full scale |
| Measurement Cycle | 5 minutes |
| Sample Flow Rate | 50–900 mL/min |
| Sample Interface | 1/4" compression fitting |
| Sample Temperature Range | 5–70 °C |
| Max. Suspended Solids | 2% w/w, max. particle size 1.27 mm |
| Sample Pressure Range | 0–345 kPa (0–50 psig) |
| Drain Outlet | 3/4" NPT male, atmospheric discharge |
| Alarm Outputs | User-programmable digital outputs |
| Analog Output | 4–20 mA, fully configurable |
| Power Supply | 100–240 VAC, 50/60 Hz |
| Enclosure Rating | NEMA 4X (IP65) |
| Mounting | Wall-mounted with included hardware |
| Dimensions (W×H×D) | 387 × 406 × 210 mm |
| Weight | ~36 kg (fully configured) |
| Certifications | CE compliant |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Sentine Sulfide Ion Online Monitor |
| Instrument Type | Multi-Ion Analyzer |
| Measurement Principle | Colorimetric (with DMPD Oxalate Reagent) |
| Range | 0–5 ppm (customizable for higher ranges) |
| Accuracy | ±2% of reading or full scale |
| Resolution | 0.001 ppm |
| Repeatability | ±2% of reading or full scale |
| Measurement Wavelength | 650 nm |
| Reference Wavelength | 810 nm |
| Cycle Time | 15 minutes |
| Sample Flow Rate | 50–900 mL/min |
| Sample Volume per Analysis | 30 mL |
| Sample Temperature Range | 5–70 °C |
| Max. Suspended Solids | 2% w/v, max. particle size 1.27 mm |
| Sample Pressure | 0–50 psig |
| Sample Interface | 1/4" compression fitting |
| Effluent Port | 3/4" NPT male, atmospheric vent |
| Alarm Outputs | User-programmable digital outputs |
| Analog Output | 4–20 mA, fully configurable |
| Power Supply | 100–240 VAC, 50/60 Hz |
| Enclosure Rating | NEMA 4X (IP65) |
| Mounting | Wall-mounted (hardware included) |
| Dimensions (W×H×D) | 387 × 406 × 210 mm |
| Weight | ~36 kg (fully configured) |
| Certifications | CE compliant |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Sentinel Chromium Ion Online Monitor |
| Price | Upon Request |
| Instrument Type | Multi-Ion Analyzer |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Sentinel Chromium Ion Online Monitor |
| Price | Upon Request |
| Instrument Type | Multi-Ion Analyzer |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Sentinel Cu Ion Online Monitor |
| Instrument Type | Multi-Ion Analyzer |
| Measurement Principle | Colorimetric Spectrophotometry (Bathocuproine or Neocuproine Method) |
| Range | 0–10 ppm (Low), 0–20 ppm (High) |
| Accuracy | ±2% of reading or full scale |
| Resolution | 0.001 ppm |
| Repeatability | ±2% of reading or full scale |
| Cycle Time | 5–15 minutes |
| Sample Flow Rate | 50–900 mL/min |
| Sample Temperature | 5–70 °C |
| Max Suspended Solids | 2% w/w, particle size ≤1.27 mm |
| Sample Pressure | 0–50 psig |
| Sample Interface | 1/4" compression fitting |
| Waste Outlet | 3/4" NPT male, atmospheric discharge |
| Analog Output | 4–20 mA, user-configurable |
| Alarm Outputs | Programmable digital relays |
| Power Supply | 100–240 VAC, 50/60 Hz |
| Enclosure Rating | NEMA 4X (IP65) |
| Mounting | Wall-mounted with integrated hardware |
| Dimensions (W×H×D) | 387 × 406 × 210 mm |
| Weight | ~36 kg |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Sentinel Fluoride Ion Online Monitor |
| Instrument Type | Fluoride Ion Analyzer |
| Measurement Principle | Potentiometric Ion-Selective Electrode (ISE) |
| Range | 0–20 ppm |
| Accuracy | ±5% of reading or full scale |
| Resolution | 0.001 ppm |
| Repeatability | ±5% of reading or full scale |
| Cycle Time | 2 minutes |
| Sample Flow Rate | 50–900 mL/min |
| Sample Interface | 1/4" compression fitting |
| Sample Temperature | 5–70 °C |
| Max. Suspended Solids | 2% w/w, max. particle size 1.27 mm |
| Sample Pressure | 0–50 psig |
| Waste Outlet | 3/4" NPT male, open drain |
| Alarm Outputs | User-programmable digital outputs |
| Analog Output | 4–20 mA, fully configurable |
| Power Supply | 100–240 VAC, 50/60 Hz |
| Enclosure Rating | NEMA 4X (IP65) |
| Dimensions (W×H×D) | 610 × 640 × 330 mm |
| Weight | ~36 kg (fully assembled) |
| Mounting | Wall-mounted with included hardware |
| Certifications | CE-compliant, designed to meet general requirements for industrial environmental monitoring installations |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Sentinel Nitrate Online Monitor |
| Instrument Type | Nitrate Ion (NO₃⁻) Analyzer |
| Measurement Principle | Ion-Selective Electrode (ISE) |
| Range Options | 0–10 ppm, 0–50 ppm, 0–100 ppm |
| Accuracy | ±5% of reading or full scale |
| Resolution | 0.001 ppm |
| Repeatability | ±5% of reading or full scale |
| Cycle Time | 2 minutes |
| Sample Flow Rate | 50–900 mL/min |
| Sample Inlet | 1/4″ compression fitting |
| Sample Temperature | 5–70 °C |
| Max Suspended Solids | 2% w/w, max particle size 1.27 mm (0.05″) |
| Sample Pressure | 0–50 psig |
| Waste Outlet | 3/4″ NPT male, atmospheric discharge |
| Alarm Outputs | User-programmable digital outputs |
| Analog Output | 4–20 mA, fully configurable |
| Power Supply | 100–240 VAC, 50/60 Hz |
| Enclosure Rating | NEMA 4X (IP65) |
| Dimensions (W×H×D) | 610 × 640 × 330 mm |
| Weight | ~36 kg (fully assembled) |
| Mounting | Wall-mounted with included hardware |
| Certifications | CE compliant |