Environmental Monitoring Instruments
Filter
Showing 1111–1140 of 9029 results
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | C-OPS |
| Pricing | Available Upon Request |
| Brand | C. Gerhardt |
|---|---|
| Origin | Germany |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported |
| Model | CSB 8s |
| Digestion Method | Reflux Digestion |
| Heating Module | Single Aluminum Block |
| Batch Capacity | 8 samples |
| Temperature Range | 0–430 °C |
| Temperature Accuracy | ±0.5 °C |
| Digestion Vessel Volume | 300 mL |
| Timer Resolution | 0.0001 h (0.36 s) |
| Programmable Methods | 99 user-defined methods (up to 40 heating steps per method) |
| Preloaded Methods | 30 standard protocols |
| Power Control | Continuously adjustable heating power |
| Controller | Detachable, password-protected unit with audit trail and user access levels |
| Footprint | 51.5 × 48.3 cm |
| Safety Features | Motorized lift mechanism for sample rack, preheating function, thermal insulation, overtemperature protection |
| Brand | C. Gerhardt |
|---|---|
| Origin | Germany |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Imported |
| Model | CSB-L 20s |
| Digestion Method | Reflux Digestion |
| Heating Module | Single Aluminum Block |
| Batch Capacity | 20 samples |
| Temperature Range | 0–430 °C |
| Temperature Accuracy | ±0.5 °C |
| Digestion Vessel Capacity | 300 mL |
| Timer Accuracy | ±0.00 min |
| Brand | BJBY (Beijing Baoyun) |
|---|---|
| Model | C222 |
| Lead Equivalence (Front) | 0.35 mm Pb or 0.5 mm Pb |
| Lead Equivalence (Back & Sleeves) | 0.25 mm Pb |
| Overlap Design (Front Closure) | Hook-and-Loop (0.7 mm Pb) or Snap Fastener (1.0 mm Pb) |
| Shoulder Padding | Integrated Soft Foam Cushioning |
| Waist Support | Adjustable Wide Elastic Belt |
| Color Options | 12 Standard Colors |
| Size Range | 17 Standard Sizes |
| Compliance | Meets IEC 61331-1:2014 and GBZ 130-2020 Requirements for Diagnostic Radiology Protective Apparel |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | CA-9000 |
| Pricing | Available Upon Request |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | CA-9000A |
| Pricing | Available Upon Request |
| Brand | CALDEE |
|---|---|
| Origin | Shaanxi, China |
| Model | PLD-11901 |
| Instrument Type | Benchtop Water Quality Analyzer |
| Detection Principle | Gravimetric Filtration (0.45 µm membrane) |
| Filter Diameter | φ50 mm or φ60 mm |
| Drying Temperature | 104 ± 1 °C |
| Weighing Precision | ≥ 0.1 mg |
| Minimum Detectable Concentration | 2 mg/L |
| Maximum Negative Pressure | ≥ 80 kPa |
| Vacuum Adjustment Range | 20–80 kPa |
| Airflow Rate | ≥ 20 L/min |
| Noise Level | ≤ 60 dB(A) |
| Power Supply | AC 220 V ± 10 %, 50 Hz |
| Brand | California Instruments |
|---|---|
| Origin | USA |
| Model | 700 |
| Spectral Resolution | 0.5 cm⁻¹ |
| Spectral Range | 305–7500 cm⁻¹ |
| Detector | MCT-A |
| Interferometer | RockSolid™ Cube Corner Retroreflector Design |
| Sample Cell Temperature | 50 °C or 191 °C (heated, 316 stainless steel) |
| Optical Path Length | 10.2 m |
| Data Output Rate | 1 Hz |
| Response Time | <1 s to 5 min (application-dependent) |
| Detection Range | ppb to % v/v |
| Sample Flow Rate | 0.2–5 LPM |
| Dimensions | 26.7 × 48.3 × 71.1 cm (H×W×D) |
| Weight | 57.6 kg |
| Environmental Operating Range | 5–40 °C, <90% RH (non-condensing) |
| Power Supply | 230 VAC / 50 Hz |
| Window Material | ZnSe (standard), optional alternatives available |
| Sealing | Parafluor O-rings |
| Inlet/Outlet Fittings | 3/8″ tubing |
| Purge Fitting | 1/4″ Swagelok® compression |
| Brand | Campbell Scientific |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | AP200 |
| Pricing | Upon Request |
| Brand | Campbell Scientific |
|---|---|
| Origin | USA |
| Model | CPEC200 |
| Operating Temperature | −30 °C to +50 °C |
| Input Voltage | 10.5–16.0 Vdc |
| Typical Power Consumption | 12 W (max 35 W cold start) |
| System Dimensions | 52.1 × 44.5 × 29.7 cm |
| System Weight | 11.6 kg |
| Pump Module Flow Rate | 3–9 LPM (typ. 7 LPM) |
| Pump Pressure Range | 15–115 kPa |
| Valve Modules | 3-valve (zero, CO₂ span, H₂O span) or 6-valve (zero, four CO₂ spans, one H₂O span) |
| Data Storage | 2 GB CompactFlash card (≥60 days at 10 Hz) |
| Communication Interfaces | Ethernet, RS-232, short-haul modem, cellular, radio, satellite |
| Brand | Campbell Scientific |
|---|---|
| Origin | USA |
| Model | CPEC310 |
| Operating Temperature Range | −30 °C to +50 °C |
| Input Voltage | 10.5–16.0 V DC |
| Typical Power Consumption | 12 W |
| Max Power (Cold Start) | 35 W |
| Sample Cell Volume | 5.9 mL |
| Sample Residence Time | 50 ms @ 7 L/min |
| Frequency Response (−3 dB) | 5.8 Hz (CO₂/H₂O) |
| Cut-off Frequency (System) | 4.3 Hz |
| Pump Flow Rate | 3–9 L/min (Auto-Controlled, Default: 7 L/min) |
| Pressure Sensor Range | 15–115 kPa |
| Enclosure Dimensions (Control Box) | 54 × 44.5 × 29.7 cm |
| Weight (Control Box) | 15.36 kg (16.24 kg w/ CDM-A116) |
| Pump Module Dimensions | 35.6 × 29.2 × 13.5 cm |
| Weight (Pump Module) | 5.4 kg |
| Three-Valve Module Dimensions | 14.0 × 12.7 × 14.0 cm |
| Weight | 1.5 kg |
| Scrubber Module Heater Power | 8 W |
| Molecular Sieve Bead Size | 1.6–2.5 mm |
| Scrubber Cylinder Volume | 480 cm³ |
| Brand | Campbell Scientific |
|---|---|
| Model | CPEC310 |
| Origin | USA |
| System Type | Closed-path eddy covariance flux measurement system |
| Power Consumption | 12 W @ 25°C |
| Operating Temperature | −30 to +50°C |
| Operating Pressure Range | 70–106 kPa (expandable) |
| Measurement Frequency | 60 Hz |
| Output Rates | 5, 10, 12.5, or 20 Hz |
| Data Interfaces | SDM, RS-485, USB, analog (CO₂/H₂O only) |
| Total Mass | 15.36 kg |
| Warranty | 1 year from shipment |
| Gas Analyzer Sample Cell Volume | 5.9 mL |
| Cutoff Frequency | 4.3 Hz |
| CO₂ Accuracy | ±1% of reading |
| H₂O Accuracy | ±2% of reading |
| CO₂ Precision (RMS) | ≤0.15 µmol/mol |
| H₂O Precision (RMS) | ≤0.006 mmol/mol |
| CO₂ Zero Drift | ±0.3 µmol/mol/°C |
| H₂O Zero Drift | ±0.05 mmol/mol/°C |
| CO₂ Gain Drift | ±0.1% reading/°C |
| H₂O Gain Drift | ±0.3% reading/°C |
| Cross-sensitivity | CO₂ → H₂O: ±1.1×10⁻⁴ mol CO₂/mol H₂O |
| H₂O → CO₂ | ±0.1 mol H₂O/mol CO₂ |
| CSAT3A Path Lengths | Vertical 10.0 cm, Horizontal 5.8 cm |
| Wind Speed Range | uₓ/uᵧ ±65 m/s, u_z ±8 m/s |
| Wind Direction Range | 2.5°–357.5° (0–360° customizable) |
| Sonic Temperature Range | −50 to +60°C |
| Sonic Temperature Precision | 0.0025°C RMS |
| Brand | Campbell Scientific |
|---|---|
| Origin | USA |
| Model | CS320 |
| Sensor Type | Thermopile-based Total Solar Radiation Sensor |
| Calibration Uncertainty | ±5% |
| Measurement Range | 0–2000 W/m² |
| Repeatability | <1% |
| Long-term Drift | <2% per year |
| Non-linearity | <1% |
| Spectral Range | 385–2105 nm |
| Field of View | 180° (hemispherical) |
| Response Time | 2 s |
| Temperature Dependence | <5% over −15 to +45 °C |
| Operating Temperature | −50 to +50 °C |
| Heating Power | 0.2 W |
| Supply Voltage | 6–24 VDC |
| Current Consumption | 5 mA (during measurement) |
| Output Protocol | SDI-12 digital interface |
| Sensor Diameter | 34.3 mm |
| Height | 39.6 mm |
| Mass | 64.9 g |
| Brand | Campbell Scientific |
|---|---|
| Origin | USA |
| Model | CSAT3 |
| Measurement Principle | Ultrasonic Time-of-Flight (TOF) in Three Orthogonal Axes |
| Vertical Path Length | 10 cm |
| Output Frequency | Up to 50 Hz |
| Output Options | Analog (±5 V) and Digital (SDM, RS-232) |
| Operating Temperature Range | –30°C to +50°C |
| Ingress Protection | IP66-rated enclosure |
| Compliance | Designed for eddy covariance systems compliant with AmeriFlux, ICOS, and FLUXNET protocols |
| Integrated Clock | Internal temperature-compensated crystal oscillator (TCXO), ±1 ppm stability over operating range |
| Synchronization | SDM-compatible for precise multi-sensor timing alignment |
| Brand | Campbell Scientific |
|---|---|
| Origin | USA |
| Model | IRGASON |
| Measurement Principle | Simultaneous open-path infrared absorption (CO₂/H₂O) and ultrasonic anemometry (3D wind velocity, sonic temperature) |
| Output Frequency | Up to 60 Hz |
| Bandwidth | 20 Hz |
| Power Consumption | Low-power design compatible with solar power systems |
| Environmental Rating | IP65-rated enclosure |
| Calibration | Factory-calibrated for CO₂, H₂O, air temperature, barometric pressure, and sonic temperature across wide operational ranges |
| Diagnostic Capabilities | Comprehensive real-time diagnostics including signal strength, window contamination status, transducer health, and acoustic path integrity |
| Data Compatibility | Native support for Campbell Scientific CR series dataloggers (e.g., CR6, CR1000X) with full integration of setup, zero/span adjustment, and configuration via direct serial or SDI-12 interface |
| Rain Mitigation | Patented hydrophobic mesh + adaptive ultrasonic signal processing to maintain wind vector accuracy during precipitation |
| Optical Design | Angled optical windows with anti-water-adhesion geometry and tolerance for mild surface contamination |
| Thermal Management | Passive temperature compensation—no active heater required |
| Brand | Campbell Scientific |
|---|---|
| Model | IRGASON |
| Origin | USA |
| Type | Integrated Open-Path Eddy Covariance System |
| Operating Temperature | −30 to +50 °C |
| Operating Pressure | 70–106 kPa (expandable) |
| Supply Voltage | 10–16 VDC |
| Average Power Consumption | 5 W @ 25 °C |
| Measurement Frequency | 60 Hz |
| Output Bandwidth Options | 5, 10, 12.5, 20 Hz |
| Data Output Interfaces | SDM, RS-485, USB, Analog (CO₂/H₂O only) |
| Gas Path Length | 15.37 cm |
| CO₂ Accuracy | ±1% of reading |
| H₂O Accuracy | ±2% of reading |
| CO₂ Precision (RMS) | 0.2 mg/m³ (0.15 µmol/mol) |
| H₂O Precision (RMS) | 0.004 g/m³ (0.006 mmol/mol) |
| CO₂ Calibration Range | 0–1,000 µmol/mol (extendable to 3,000 µmol/mol) |
| H₂O Calibration Range | 0–72 mmol/mol (at 38 °C dew point) |
| CO₂ Temperature-Dependent Gain Drift | ±0.1% reading/°C |
| H₂O Temperature-Dependent Gain Drift | ±0.3% reading/°C |
| CO₂–H₂O Cross-Sensitivity | ±1.1×10⁻⁴ mol CO₂/mol H₂O |
| H₂O–CO₂ Cross-Sensitivity | ±0.1 mol H₂O/mol CO₂ |
| Ultrasonic Anemometer Path Lengths | Vertical 10.0 cm, Horizontal 5.8 cm |
| Wind Speed Range (uₓ/uᵧ) | ±65 m/s |
| Wind Speed Range (u_z) | ±8 m/s |
| Wind Direction Range | 2.5°–357.5° (0–360° customizable) |
| Ultrasonic Temperature Range | −50 to +60 °C |
| uₓ/uᵧ Offset Error | <±8.0 cm/s |
| u_z Offset Error | <±4.0 cm/s |
| Wind Direction Offset Error | ±0.7° |
| Gain Error (at ±5° tilt) | <±2% reading |
| uₓ/uᵧ Precision (RMS) | 1 mm/s |
| u_z Precision (RMS) | 0.5 mm/s |
| Wind Direction Precision (1 m/s wind) | 0.06° |
| Ultrasonic Temperature Precision | 0.0025 °C |
| Total Mass | 6 kg |
| Warranty | 3 years from factory shipment or 17,500 operational hours, whichever occurs first |
| Brand | Campbell Scientific |
|---|---|
| Origin | USA |
| Model | SoilVUE10 |
| Measurement Principle | Time-Domain Reflectometry (TDR) |
| Output Protocol | SDI-12 v1.4 |
| Depth Options | 0.5 m (6 depth layers) or 1.0 m (9 depth layers) |
| Diameter | 5.2 cm (body), 5.8 cm (with threads) |
| Length | 0.55 m (0.5 m version) / 1.05 m (1.0 m version) |
| Weight | 1.9 kg / 3.6 kg |
| Operating Temperature | −30 °C to +40 °C |
| Volumetric Water Content Accuracy | ±1.5% (for most mineral soils) |
| Electrical Conductivity Range | 0–10 dS/m |
| Relative Permittivity Range | 1–80 |
| Relative Permittivity Accuracy | ±1 unit |
| Temperature Accuracy | ±0.15 °C |
| Power | ~64 mA dynamic / ~2.5 mA quiescent @ 12 VDC |
| IP Rating | IP67 (M12 connector) |
| Compliance | SDI-12 v1.4, RoHS, CE |
| Brand | Camsco |
|---|---|
| Dimensions | 6 mm OD × 4.5 in length |
| Sorbent | Tenax TA / Carboxen 1000 (dual-bed) |
| Conditioning | Pre-aged (baked out) |
| Cap | Stainless steel storage cap |
| Packaging | Individual sterile packaging |
| Compatibility | CDS thermal desorbers |
| Origin | Manufactured in USA, distributed by Sanpu (Beijing) |
| Brand | CANNON |
|---|---|
| Origin | USA |
| Model | 9721-N89 |
| Capillary Constant | 30 cSt/s |
| Kinematic Viscosity Range | 600–3000 cSt |
| Compliance | ASTM D445, ASTM D446, ASTM D2170 |
| Temperature Stability Requirement | ±0.02 °C (15–100 °C) |
| Capillary Geometry | Ubbelohde semi-micro, dilution-compatible, suspended-level design |
| Brand | Capintec |
|---|---|
| Origin | USA |
| Model | CRC55tR |
| Instrument Type | Portable Dose Calibrator |
| Measurement Principle | Ionization Chamber (Thin-Walled, High-Pressure Argon-Filled Well Chamber) |
| Max Activity Range | 250 GBq (6 Ci) |
| Minimum Detectable Activity | 0.001 MBq (0.01 µCi) |
| Display | 8" VGA Color Touchscreen |
| Accuracy | ±2% |
| Linearity | ±2% |
| Response Time | ≤2 s (standard), 4–16 s (low-activity samples) |
| Chamber Fill Gas | Ultra-High-Purity Argon at 12 atm |
| Well Dimensions | Ø6.1 cm × Depth 25.4 cm |
| Console Dimensions | 42 × 23 × 27 cm |
| Console Weight | 3.4 kg |
| Chamber Weight | 13.6 kg |
| Power | 100–240 VAC, 50/60 Hz, 90 mA |
| Interfaces | RS-232, USB |
| Compliance | Meets NIST-traceable calibration requirements for nuclear medicine |
| Brand | CAS TECHNOLOGY |
|---|---|
| Origin | Shandong, China |
| Model | PC-300 |
| Instrument Type | Portable/Handheld Water Quality Analyzer |
| Measurement Principle | Electrochemical Method |
| Measured Parameters | Conductivity, pH, Dissolved Oxygen (DO), Oxidation-Reduction Potential (ORP), Temperature |
| Enclosure Rating | IP67 (main unit), IP68 (electrodes) |
| Power Supply | AA batteries or USB-C external power |
| Calibration | Automatic electrode recognition, auto-calibration for pH, conductivity, and DO |
| Data Management | On-device storage, Bluetooth connectivity to companion mobile app |
| Compliance | Designed for field-deployable environmental monitoring in accordance with standard electrochemical measurement practices (ASTM D1129, ISO 7888, ISO 5814, ISO 10523, ISO 7888) |
| Brand | Casella |
|---|---|
| Origin | United Kingdom |
| Model | CEL-240 |
| Compliance | IEC 61672-1:2013 Class 2, ANSI S1.4-2014 Type 2 |
| Measurement Range | 30–130 dB(A), 35–130 dB(C) |
| Frequency Weighting | A, C, Z (Linear) |
| Time Weighting | Fast (F), Slow (S), Impulse (I) |
| Max Hold Function | Yes |
| Battery Life | >35 hours (alkaline) |
| Data Output | USB 2.0 (real-time & stored data) |
| Display | High-resolution backlit LCD with time-history trace |
| Operating Temperature | −10 °C to +50 °C |
| IP Rating | IP54 |
| Warranty | 2 years |
| Brand | Casella |
|---|---|
| Origin | United Kingdom |
| Model | CEL-620 |
| Compliance | IEC 61672-1:2013 Class 1, IEC 61260-1:2014 Class 0 (for CEL-620B), ANSI S1.4-2014, ANSI S1.43-2020 |
| Measurement Range | 20–140 dB RMS (single full scale), 143 dB peak |
| Frequency Weightings | Simultaneous A-, C-, and Z-weighting |
| Time Weightings | Simultaneous Fast, Slow, and Impulse |
| Integrated Metrics | L<sub>XY</sub>, L<sub>XY,max</sub>, L<sub>XY,min</sub>, L<sub>X,eq</sub>, L<sub>avg</sub>, L<sub>C−A</sub>, L<sub>AE</sub>, L<sub>TM3–TM5</sub> |
| Octave Band Analysis | 11 bands (16 Hz–16 kHz, CEL-620B only) |
| Display | 320 × 240 pixel TFT color LCD |
| Data Storage | 100 measurement sessions with full metadata |
| Power | 3 × AA alkaline or rechargeable batteries (11 h with backlight, 20 h without) |
| Operating Temperature | −10 °C to +50 °C (Class 1), 0 °C to +40 °C (Class 2) |
| Dimensions | 72 × 229 × 31 mm |
| Weight | 295 g |
| Brand | Casella |
|---|---|
| Origin | United Kingdom |
| Model | CEL-712 |
| Measurement Principle | Forward Light Scattering (880 nm Infrared) |
| Safety Rating | Intrinsically Safe (ATEX/IECEx Certified) |
| Measurement Range | 0.001 mg/m³ to 250 g/m³ |
| Resolution | 0.001 mg/m³ |
| Operating Temperature | 0–55 °C (non-condensing) |
| Zero Drift Stability | <2 µg/m³/°C |
| Data Storage Capacity | 86,000 data points |
| Sampling Interval | Adjustable from 1 second to 60 minutes |
| Display | TFT color LCD with real-time trend graphing |
| Power Supply | 3 × AA NiCd rechargeable or alkaline batteries (13 h typical operation) |
| Weight | 0.6 kg (including batteries) |
| Dimensions | 172 × 72 × 33 mm |
| Analog Output | 0–2.5 V DC |
| Communication Interface | Mini-B USB |
| Compliance | Meets ISO 7706:2022 (ambient aerosol monitoring), EN 481 (inhalable fraction), EN 13205 (PM₁₀ and PM₂.₅ sampling conventions), ATEX Directive 2014/34/EU (Category 2G, Zone 1) |
| Brand | Casella |
|---|---|
| Origin | United Kingdom |
| Model | GUARDIAN2 |
| Dust Detection Sensitivity | 1 µg/m³ |
| Zero Stability | ±2 µg/m³ |
| Particle Size Selectors | TSP, PM₁₀, PM₂.₅ |
| Noise Accuracy | IEC 61672-1 Class 1 |
| Noise Metrics | L<sub>Aeq</sub>, L<sub>Amax</sub>, L<sub>A10%</sub>, L<sub>A90%</sub> |
| Noise Range | 20–140 dB RMS |
| Included Acoustic Calibrator | CEL-120/1 |
| Vibration Sensor | Triaxial Geophone |
| Vibration Frequency Range | 2–250 Hz |
| Vibration Resolution | 0.01 mm/s |
| Wind Speed Range | 0–60 m/s |
| Wind Speed Accuracy | ±2% |
| Wind Speed Resolution | 0.01 m/s |
| Wind Direction Range | 0–359° |
| Wind Direction Accuracy | ±3% |
| Wind Direction Resolution | 0.1° |
| VOC Range | 0–6000 ppm |
| VOC Resolution | 0.1 ppm |
| Enclosure Rating | IP65 |
| Operating Humidity | 5–100% RH |
| Data Storage | Internal Flash Memory |
| Communication | GPRS |
| Power Supply | 220–240 VAC or Hybrid Solar/Wind |
| Mounting | Wall or Pole (50 mm diameter) |
| Origin | Jiangsu, China |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic |
| Model | TUFF |
| Price | Upon Request |
| Brand | CASP |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Domestic (China) |
| Model | AGHJ-I-LIDAR(HPL) |
| Price Range | USD 140,000 – 280,000 |
| Laser Source | Nd:YAG / Solid-State Laser Diode |
| Detector | High-Sensitivity, Low-Noise Photomultiplier Tube (PMT) |
| Operating Wavelength | 532 nm |
| Maximum Detection Altitude | 20 km |
| Pulse Repetition Rate | 2–2.5 kHz |
| Brand | Catalytic |
|---|---|
| Origin | Germany |
| Model | CS015 |
| Operating Temperature | 350 °C |
| Standard Flow Rate | 1.5 L/min (STP) |
| Oxidation Efficiency | ≥99.9% for n-tetradecane (PMP-compliant) |
| Power Supply | 100–240 V AC, 50/60 Hz, 210 W |
| Communication Interface | USB with MODBUS protocol |
| Inlet/Outlet Diameter | 6 mm |
| Exit Temperature | Ambient + 25 °C |
| Particle Loss Optimization | Minimized for solid particles ≥50 nm at 1 mg/m³ mass concentration |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | CCHZ-1000 |
| Pricing | Available Upon Request |
| Dust Measurement Range | 0–1000 mg/m³ |
| Measurement Accuracy | < ±10% |
| Stability Relative Error | ±2.5% |
| Sampling Flow Rate | 2 L/min |
| Flow Rate Accuracy | < ±2.5% |
| Intrinsic Safety Rating | ibdI (150 °C) |
| Compliance | MT163–1997 |
| Brand | 1124123/13213112 |
|---|---|
| Origin | Jiangsu, China |
| Model | CCHZ-1000 |
| Measurement Principle | Light Scattering |
| Safety Rating | Exib I (150 °C) Intrinsically Safe |
| Measurement Range | 0–1000 mg/m³ |
| Resolution | 0.001 mg/m³ |
| Accuracy | ±10% |
| Relative Stability Error | ±2.5% |
| Sampling Flow Rate | 2.0 L/min (±2.5%) |
| Data Storage Capacity | 50 test records |
| Dimensions | 220 × 150 × 82 mm |
| Weight | 1.9 kg |