Environmental Test Chamber
Filter
Showing 901–930 of 3663 results
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 3,500 (FOB) |
| Compliance Standards | IEC 60529, ISO 20653, GB/T 4208, GJB 150.8, IEC 60068-2-68, GB 2423.38 |
| Brand | IREA TECH |
|---|---|
| Origin | USA |
| Model | IREA TECH - HAST |
| Chamber Type | Upright |
| Certification | KOSHA Pressure Vessel Safety Approval |
| Compliance | Meets requirements for JEDEC JESD22-A110 and JESD22-A108 accelerated reliability testing |
| Humidity Range | 85–100% RH (at elevated temperature/pressure) |
| Temperature Range | 100–130°C (saturated steam environment) |
| Test Acceleration Factor | ≥10× vs. conventional THB (Temperature-Humidity-Bias) testing |
| Water Supply | Integrated auto-fill system with dual-level water detection |
| Chamber Construction | Stainless steel 316 inner chamber, reinforced pressure-rated enclosure |
| Optional Features | Anti-fog heated viewing window, internal LED lighting, pass-through ports (50 mm standard, up to 100 mm available), internal access door |
| Brand | JB Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-SO2 |
| Internal Working Chamber Dimensions (W×D×H) | 500 × 1000 × 600 mm |
| External Dimensions (W×D×H) | 800 × 1500 × 1300 mm |
| Temperature Range | Ambient to 60 °C |
| Humidity Range | 85–95 % RH |
| SO₂ Gas Concentration Control Range | 0.1–1 ppm |
| Gas Delivery Method | Regulated Compressed Cylinder Supply |
| Temperature Uniformity | ≤ ±2 °C |
| Temperature Stability | ≤ ±1.0 °C |
| Heating System | Stainless Steel 316L Finned Heaters with Infrared Ni-Cr Alloy Elements |
| Humidification Method | Isolated Boiler Steam Generation |
| Air Circulation | Forced Convection via Low-Noise Long-Shaft Centrifugal Blower |
| Control System | TEMI550 Touchscreen PID Controller with PT100 Sensors and 4–20 mA SO₂ Transmitter (0–100 ppm range) |
| Safety Protections | Overtemperature, Overhumidity, Phase Failure/Reverse Phase, Motor Overload, Water Shortage, Pump Overload, Leakage Current, Audible/Visual Alarm with Auto-Shutdown |
| Compliance Standards | GB/T 2423.19–1981, GB/T 10125–1997, GB/T 9789, IEC 60068-2-42 & IEC 60068-2-43 |
| Total Power Consumption | 4 kW |
| Supply Voltage | 220 V AC, 50 Hz |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Region | Domestic (China) |
| Model | JB-220E |
| Pricing | Upon Request |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-2301 |
| Temperature Range | RT to 300 °C |
| Interior Dimensions (W×D×H) | 600 mm × 500 mm × 750 mm |
| Temperature Uniformity | ±2 °C (loaded) / ≤3 °C (unloaded) |
| Temperature Stability | ±0.5 °C |
| Heating Rate | ≥3 °C/min (non-linear) |
| Control Resolution | 0.1 °C |
| Timer Range | 000:01–999:99 h:min |
| Drive Motor | 1/4 HP |
| Safety Protections | Overtemperature, Overload, Leakage Current |
| Alarm | Audible Buzzer |
| Heating Power | 3.2 kW |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-25T-2 |
| Type | Semi-Automatic Two-Platen Hydraulic Vulcanizing Press |
| Nominal Clamping Force | 250 kN |
| Platen Size | 300 mm × 300 mm |
| Heating Method | Electric Cartridge Heaters |
| Temperature Control Range | Ambient to 200 °C |
| Temperature Uniformity | ±1.5 °C across platen surface |
| Cycle Time (typical) | 3–8 min (dependent on compound and thickness) |
| Control System | PLC with HMI touchscreen interface |
| Safety Compliance | CE-marked per EN 692:2014 (mechanical presses), ISO 13857 guarding requirements |
| Brand | JB-Brookfield |
|---|---|
| Origin | Shanghai, China |
| Model | JB-150-BK |
| Test Medium | Water or Compatible Liquids |
| Max Test Pressure | 0–250 MPa |
| Pressure Ramp Rate | 100–6000 bar/min (adjustable) |
| Pressure Measurement Accuracy | ±0.5% FS (high-stability piezoresistive transducer) |
| Drive Medium | Compressed Air (3–6.9 bar, ≥2 Nm³/min) |
| Power Supply | 220 V AC, 50 Hz, 0.15 kW |
| Control Cabinet Dimensions | 800 × 700 × 1500 mm |
| Test Chamber Dimensions | 2000 × 900 × 1200 mm (2 mm steel + energy-absorbing lining) |
| High-Pressure Port | 1 × G1/4 internal thread (600 bar rating) |
| Auto-Depressurization | Yes |
| Seal Fixture Type | Dedicated non-marring clamping system for high-pressure steel tubing |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-4000 |
| Price | Upon Request |
| Power Supply | 220 V AC ±10% |
| Max Operating Pressure | 2.5 MPa |
| Burst Pressure | 2.7–3.3 MPa |
| Temperature Control Range | Ambient to 200 °C |
| Chamber Dimensions | 560 × 420 × 670 mm |
| Bomb Volume | 4000 mL |
| Heating Power | 2.4 kW |
| Temperature Alarm Range | 0–200 °C (adjustable) |
| Temperature Uniformity | ±0.5 °C |
| Display | Digital LED |
| Control System | Microprocessor-based Intelligent PID Controller |
| Bomb Construction | Inner chamber – AISI 304 stainless steel |
| Brand | JB-Brookfield |
|---|---|
| Model | JB-GDW |
| Temperature Range | -65 °C to +100 °C (Cascade Refrigeration System) |
| Interior Dimensions (mm) | 350×320×450 / 400×500×500 / 600×550×750 / 700×800×890 |
| Temperature Uniformity | ±0.5 °C |
| Sensor Type | PT100 Platinum Resistance Thermometer |
| Construction | Exterior – Phosphated & Powder-Coated Steel |
| Power Supply | 380 V, 50 Hz |
| Safety Protections | Compressor Overheat, Fan Overheat, High-Pressure Cut-off, Phase Loss, Overload, Overtemperature, Low-Water Interlock |
| Compliance | GB/T 2423.1–2001, GB/T 2423.2–2001, GB/T 2423.3–1993, GB/T 2423.4–1993, GB 10592–1989 |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-JM7 |
| Pricing | Available Upon Request |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-LY |
| Chamber Dimensions (W×D×H) | 1000 × 1000 × 1000 mm |
| Spray Ring Radius | R375 mm |
| Nozzle Diameter | Adjustable |
| Nozzle Spacing | 50 mm |
| Oscillation Angles | 60°, 90°, 135° |
| Turntable Speed | 1–17 rpm |
| Water Pressure | ~80 kPa |
| Power Supply | AC 380 V ±10% / 220 V ±10%, 50 Hz |
| Total Power | 2 kW |
| Construction | Cold-rolled steel (A3) exterior with epoxy coating |
| Compliance | GB/T 2423.38–1990, GB/T 4942.2–1993, GB 4208, GB 4706, GB 7000 |
| Brand | JeioTech |
|---|---|
| Origin | South Korea |
| Model | TH-G-408 |
| Chamber Volume | 408 L |
| Temperature Range (dry) | −40 °C to +150 °C |
| Humidity Range | 25 %RH to 95 %RH |
| Temp. Uniformity (at 40 °C, 75 %RH) | ±0.5 °C |
| Temp. Stability (at 40 °C, 75 %RH) | ±0.3 °C |
| Humidity Stability (at 40 °C, 75 %RH) | ±0.4 %RH |
| Humidity Deviation (at 40 °C, 75 %RH) | ±3 %RH |
| Heating Rate | 2.6 °C/min |
| Internal Dimensions (W×D×H) | 600 × 850 × 800 mm |
| Standard Shelving | 2 adjustable stainless steel shelves (max. 10), load capacity per shelf: 25 kg, total payload: 65 kg |
| Water Tank Capacity | 15 L |
| Net Weight | 410 kg |
| Power Supply | 3-phase 380–415 VAC, 50/60 Hz |
| Compliance | DIN 12880, IEC 60068 |
| Brand | JH Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JH-BWTI Series |
| Price Range | USD 1,100 – 110,000 |
| Application | Battery Enclosure Integrity & Electrolyte Leakage Resistance Testing |
| Compliance | Designed per IEC 62133-2, UN 38.3 Section 38.3.4 (Washing Simulation), GB/T 31241–2014 Clause 7.9.3 |
| Brand | Jinhuhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JH |
| Temperature Range | RT+10°C to 75°C |
| Sieve Mesh Specification | 50 µm wire diameter, 75 µm aperture spacing |
| Talcum Powder Loading | 2–4 kg/m³ |
| Dust Blowing Orientation | Top-down and bottom-up airflow configurations |
| Interior Construction | AISI 304 stainless steel |
| Exterior Construction | Cold-rolled steel with epoxy-polyester coating or optional AISI 304-2B stainless steel |
| Control System | Imported digital display controller |
| Brand | JH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | JH High-Temperature Aging Chamber |
| Price Range | USD 350 – 35,000 |
| Temperature Range | −70 °C to +150 °C |
| Cooling Method | Compressor-Based Refrigeration |
| Explosion-Proof Design | Yes |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate | ≤60 min (−70 °C to +150 °C) |
| Cooling Rate | ≤45 min / ≤60 min / ≤80 min (depending on configuration) |
| Internal Chamber Dimensions | Available in Small, Medium, and Large Configurations |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | JH High-Temperature Environmental Test Chamber |
| Price Range | USD 280 – 2,800 |
| Temperature Range | −70 °C to +150 °C |
| Refrigeration Method | Compressor-Based Cooling |
| Explosion-Proof Design | Yes |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate | ≤60 min (from 25 °C to 150 °C) |
| Cooling Rate | ≤45 min / ≤60 min / ≤80 min (depending on configuration) |
| Interior Dimensions | Customizable |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Model | JH High-Temperature Thermal Aging Test Chamber |
| Temperature Range | −70 °C to +150 °C |
| Refrigeration Method | Compressor-Based Cooling |
| Explosion-Proof Design | Yes |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C (at working volume center) |
| Temperature Deviation | ±2.0 °C (vs. setpoint) |
| Heating Rate | ≤60 min (−70 °C to +150 °C) |
| Cooling Rate | ≤45–80 min (depending on configuration and load) |
| Interior Dimensions | Customizable (small / medium / large chamber variants available) |
| Shelving | Multi-tier adjustable stainless-steel shelves, fully customizable in number, height, and load capacity |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (China) |
| Model | JH-Jianhu Industrial Adhesive Curing Oven |
| Price Range | USD 1,050 – 105,000 |
| Brand | JH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | JH-Semiconductor TH-CH Series |
| Price Range | USD 1,200 – 14,500 (FOB Shanghai) |
| Temperature Range | −70 °C to +150 °C |
| Cooling Method | Dual-Stage Compressor-Based Refrigeration |
| Explosion-Proof Design | Yes (Class I, Division 2, Group C/D compliant) |
| Temperature Fluctuation | ±0.5 °C (at setpoint, steady-state) |
| Temperature Uniformity | ±2.0 °C (across working chamber) |
| Temperature Deviation | ±2.0 °C (vs. reference sensor) |
| Ramp-Up Time | ≤60 min (−40 °C to +85 °C) |
| Ramp-Down Time | ≤45 min (25 °C to −40 °C), ≤60 min (25 °C to −55 °C), ≤80 min (25 °C to −70 °C) |
| Interior Dimensions | Customizable (standard range: W300–2000 mm × D300–1500 mm × H300–1800 mm) |
| Brand | Jinhuhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | JH Series |
| Price Range | USD 280–285 |
| Temperature Range | -70°C to +150°C |
| Cooling Method | Compressor-Based Refrigeration |
| Explosion-Proof Design | Yes |
| Temperature Fluctuation | ±0.5°C |
| Temperature Uniformity | ±2.0°C |
| Temperature Deviation | ±2.0°C |
| Heating Rate | ≤60 min (from 25°C to +150°C) |
| Cooling Rate | ≤45 min / ≤60 min / ≤80 min (from 25°C to -70°C, depending on chamber size) |
| Internal Chamber Dimensions | Available in Small, Medium, and Large Configurations |
| Insulation Materials | Nano-Aerogel Composite Panels + Vacuum Insulation Panels (VIPs) + Ceramic Fiber Liner |
| Control System | Programmable PID Controller with Multi-Step Ramp-Soak Profiles |
| Humidity Range | 20–98% RH (optional configuration) |
| Vacuum Capability | Integrated Dual-Stage Rotary Vane Pump (Ultimate Pressure ≤5 Pa) |
| Atmosphere Control | Nitrogen Purge Interface + O₂ Monitoring Port |
| Brand | JH Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JH-ServerCoolTemp |
| Temperature Range | -70 °C to +150 °C |
| Refrigeration Method | Compressor-Based Cooling |
| Explosion-Proof Design | Yes |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate | ≤60 min (from 25 °C to +150 °C) |
| Cooling Rate | ≤45 min (25 °C to -40 °C), ≤60 min (25 °C to -55 °C), ≤80 min (25 °C to -70 °C) |
| Internal Chamber Dimensions | Customizable |
| Brand | JH Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JH-Professional Environmental Test Chamber |
| Temperature Range | -80°C to +150°C |
| Thermal Shock Range | -40°C to +150°C |
| Temperature Stability | ±0.5°C to ±2.0°C |
| Heating Rate | 1–3°C/min |
| Cooling Rate | ≤2°C/min |
| Humidity Range | 20–98% RH |
| Humidity Control Accuracy | ±2% RH |
| Temperature Uniformity | ±2°C |
| Compliance | ISO 16750-4, IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-14, ASTM D4332, MIL-STD-810H (Section 501.7, 502.7) |
| Brand | JH |
|---|---|
| Origin | Shanghai, China |
| Model | JH Walk-in Programmable Environmental Test Chamber |
| Price Range | USD 1,100 – 110,000 (FOB) |
| Interior Dimensions | Customizable (D×W×H) |
| Temperature Range | −50 °C to +150 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Control Resolution | 0.1 °C |
| Heating Rate | 3 °C/min |
| Humidity Control | Programmable RH range with dynamic coupling to temperature profile |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Model | JH-6021 |
| Power Supply | 220 V, 50 Hz |
| Input Power | 500 W |
| Temperature Control Range | RT +10 °C to 250 °C |
| Temperature Resolution / Stability | 0.1 °C / ±1 °C |
| Ultimate Vacuum | ≤133 Pa |
| Internal Chamber Dimensions (W×D×H) | 300 × 300 × 275 mm |
| External Dimensions (W×D×H) | 580 × 450 × 450 mm |
| Shelf Quantity | 1 stainless steel shelf |
| Chamber Material | Stainless steel (AISI 304) |
| Door Seal | Molded silicone rubber gasket |
| Viewing Window | Dual-layer tempered glass |
| Vacuum & Inert Gas Interface | Electromagnetic valve–controlled inlet/outlet |
| Control System | PID digital temperature controller with over-temperature protection |
| Operating Ambient Temperature | +5 °C to +40 °C |
| Brand | Jinhuhu (JH) |
|---|---|
| Origin | Shanghai, China |
| Model | JH-7125 |
| Table Dimensions (L×W) | 1000 mm × 1200 mm |
| Max Load Capacity | 100 kg |
| Frequency Range | 100–300 rpm |
| Peak-to-Peak Amplitude | 25.4 mm |
| Timer Range | 0–99.99 h (selectable in s, min, h) |
| Power Supply | 220 V AC, 50 Hz, 5 A |
| Motor Type | DC speed-controlled, 1 HP |
| Net Weight | ~300 kg |
| Brand | Jinhuhu (JH) |
|---|---|
| Origin | Shanghai, China |
| Model | JH-B10 |
| Oscillation Radius | 1.0 m / 0.6 m |
| Turntable Diameter | 800 mm |
| Nozzle Diameter | Φ0.4 mm |
| Nozzle Spacing | 50 mm |
| Oscillation Angle | ±180°, 120°, quasi-360° |
| Pipe Inner Diameter | Φ15 mm |
| Water Pressure Range | 80–150 kPa (adjustable) |
| Turntable Speed | 1–17 rpm |
| Drive System | Frequency-controlled AC motor (imported inverter) |
| Construction Material | SUS304 stainless steel (chamber interior, exterior, and all wetted components) |
| Power Supply | AC 380 V, 50 Hz |
| Compliance | GB 4208–1993 (IPX1–IPX6 equivalent test capability) |
| Brand | JH Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JH-Battery-Explosion-Proof-CD-TripleZone |
| Price Range | USD 980 – 9,800 |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Industrial Equipment Supplier |
| Product Category | Domestic Environmental Testing Equipment |
| Model | JH-ICEWATER THERMAL SHOCK TEST CHAMBER |
| Price Range | USD 700 – 70,000 |
| Brand | JH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JH-Insulation Breakdown Voltage Tester |
| Price Range | USD 2,800 – 28,000 |
| Brand | JH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (China) |
| Model | JH-Industrial-Grade Battery Comprehensive Short-Circuit Tester |
| Price Range | USD 1,280 – 12,800 |