Gas Detector
Filter
Showing 481–510 of 2839 results
| Brand | California Measurements, Inc. (CMI) |
|---|---|
| Origin | USA |
| Model | PC-2HX |
| Flow Rate | 2 SLPM |
| Total Mass Concentration Range | 5–1000 µg/m³ |
| Aerodynamic Cut-Point Diameters (50% efficiency) | Stage 1 >20 µm, Stage 2: 10 µm, Stage 3: 7 µm (PM₁₀ inlet), Stage 4: 4 µm, Stage 5: 2.5 µm (PM₂.₅), Stage 6: 0.7 µm (PM₁.₀), Stage 7: 0.4 µm, Stage 8: 0.25 µm, Stage 9: 0.15 µm, Stage 10: 0.10 µm |
| QCM Sensitivity | ~1 ng/Hz (average) |
| Frequency Drift (post-warm-up) | ≤2 Hz/min |
| Warm-up Time | ≤10 min |
| Operating Temperature | −20 to +40 °C |
| Power Supply | 120 V AC, 50/60 Hz, 50 W |
| Impactor Pressure Drop | 320 mmHg ±10% |
| Dimensions (Impactor) | 14" H × 5" W × 12" L / 12 lbs |
| Dimensions (Control Unit) | 7" H × 17" W × 12" L / 23 lbs |
| Brand | FPI (Focus Photonics Inc.) |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model | CMS odor 1000 |
| Detection Principle | Gas Chromatography–Ion Mobility Spectrometry (GC-IMS) |
| Instrument Type | Online Analytical System |
| Typical Configuration | Multi-Compound VOC & Odorant Analyzer |
| Regulatory Compliance | GB 14554–201X, DB31/1025–2016, DB12/059–2018 (22 regulated odorants, qualitative & quantitative) |
| Detection Limit | Sub-ppt (parts-per-quadrillion) for key sulfur/nitrogen compounds |
| Resolution | 100 (IMS drift time resolution, FWHM) |
| Accuracy | ≤10% RSD (relative standard deviation) for calibrated odorants |
| Response Time | ≤10 s (IMS-only mode) |
| Brand | Cole-Parmer |
|---|---|
| Origin | USA |
| Model | 81973-20 |
| Instrument Type | Portable |
| Detection Target | CO₂ (multi-component capable) |
| Range | 0–50,000 ppm (0–5% v/v) |
| Resolution | 100 ppm (0.01%) |
| Accuracy | ±5% of reading or ±50 ppm, whichever is greater |
| Response Time | < 60 s (T₉₀) |
| Zero Drift | < ±20 ppm/week |
| Span Drift | < ±2% of full scale/month |
| Operating Temperature | 0–50 °C |
| Battery Life | 8 h (NiCd rechargeable) |
| Weight | 0.7 kg |
| Dimensions | 66.7 × 139.7 × 20.6 mm (L × H × W) |
| Data Storage | 850 records (non-volatile memory) |
| Communication | IR interface + RS232 (optional cable 81973-60) |
| Alarm | Visual (LED) and audible (variable-tone) at user-configurable thresholds (e.g., 5,000 ppm intermittent / 10,000 ppm continuous) |
| Sensor Type | Dual-wavelength non-dispersive infrared (NDIR) with integrated pressure & temperature compensation |
| Brand | Cole-Parmer |
|---|---|
| Origin | USA |
| Model | 86494-15, 86494-25, 86494-35, 86494-40, 86494-45 |
| Type | Portable |
| Detection Targets | O₂, CO, CO₂, NO, NO₂, NOₓ, SO₂, Draft Pressure, Flue Gas Temperature, Ambient Temperature |
| O₂ Range | 0–25% vol (0.1% res, ±0.2% vol) |
| CO Range | 0–8000 ppm (1 ppm res |
| CO₂ Range | 0–99.9% vol (0.1% res) |
| NO Range | 0–4000 ppm (1 ppm res |
| NO₂ Range | 0–1000 ppm (1 ppm res |
| SO₂ Range | 0–4000 ppm (1 ppm res |
| NOₓ Range | 0–5000 ppm (1 ppm res) |
| Draft Pressure | ±0–40" H₂O (0.001" H₂O res, ±5% of reading) |
| Flue Gas Temp | –23 to 1000°C (0.1°C res, ±1°C) |
| Ambient Temp | –23 to 100°C (0.1°C res, ±1°C) |
| Combustion Efficiency | 0–100% (0.1% res) |
| Exhaust Flow | ≥1.00 (0.01 res) |
| Fuel Library | 10 preloaded fuels (natural gas, propane, butane, No. 2/4/6 fuel oil, wood, coal) |
| Data Logging | Up to 600 records |
| Power | Rechargeable battery + AC adapter (9 hrs operation without printing) |
| Communication | RS-232 (86494-15/-25), USB (86494-35/-40/-45) |
| Included | Dual-channel sampling hose (10 ft), 12" metal probe, factory-calibrated sensors, calibration certificate, non-thermal printer paper, rubber feet, carrying case |
| Brand | Cole-Parmer |
|---|---|
| Origin | USA |
| Model | 86384-05, 86384-15 |
| CO₂ Range | 0–5000 ppm |
| CO Range (86384-15 only) | 0–500 ppm |
| RH Range | 5–95% |
| Temperature Range | 0–60 °C |
| CO₂ Resolution | 1 ppm |
| CO Resolution | 0.1 ppm |
| RH Resolution | 0.1% |
| Temp Resolution | 0.1 °C / 0.1 °F |
| CO₂ Accuracy | ±3% of reading or ±50 ppm |
| CO Accuracy | ±3% of reading or ±3 ppm |
| RH Accuracy | ±2% |
| Temp Accuracy | ±0.6 °C (±1.0 °F) |
| Data Storage Capacity (86384-15) | 26,900 timestamped records |
| Power | 4 × AA batteries or 115 VAC adapter (included with 86384-15) |
| Operating Ambient Temp | 5–70 °C |
| Dimensions | 10.2 × ? × 3.8 cm (L × H × W |
| Weight | 0.4 kg (86384-05), 0.5 kg (86384-15) |
| Software | LogDat 2™ for Windows (≥3.1), LogDat 2 Companion for Excel |
| Brand | Cole-Parmer |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 86515-20 |
| Measurement Principle | Electrochemical (O₂, CO, H₂S) & Catalytic Bead (Combustible Gas) |
| Measured Gases | O₂, CO, H₂S, LEL (Methane/Propane Equivalent) |
| Detection Ranges | O₂ (0–25% vol), CO (0–2000 ppm), H₂S (0–200 ppm), LEL (0–100% LEL) |
| Resolution | O₂ (0.1% vol), CO/H₂S (1 ppm), LEL (1% LEL) |
| Alarm Setpoints | O₂ (Low: 19.5%, High: 23.5%), CO (Low: 35 ppm, High: 50 ppm), H₂S (Low: 10 ppm, High: 20 ppm), LEL (Low: 10% LEL, High: 20% LEL) |
| Alarm Output | Audible (90 dB @ 1 ft), Visual (180° LED array), Vibratory |
| Data Logging | Internal memory with IR interface for PC download |
| Battery | Two AA alkaline cells (12 h typical runtime) |
| Weight | 7.8 oz (0.22 kg) |
| Enclosure Rating | IP67 |
| Certifications | UL/cUL Class I, Div 1, Groups A–G, T4 |
| Sensor Life | 5 years (typical) |
| Brand | Cole-Parmer |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | Imported |
| Model | 86515-30 |
| Measurement Principle | Electrochemical (O₂, CO, H₂S) & Catalytic Bead (LEL) |
| Measured Gases | O₂ (0–25% vol), CO (0–2000 ppm), H₂S (0–200 ppm), Combustible Gas (0–100% LEL) |
| Resolution | O₂: 0.1% vol |
| CO | 1 ppm |
| H₂S | 1 ppm |
| LEL | 1% LEL |
| Alarm Setpoints | O₂: Low 19.5%, High 23.5% |
| CO | Low 35 ppm, High 50 ppm |
| H₂S | Low 10 ppm, High 20 ppm |
| LEL | Low 10%, High 20% |
| Audible Alarm | 90 dB @ 1 ft |
| Visual Alarm | Dual high-intensity LEDs |
| Tactile Alarm | Vibration motor |
| Ingress Protection | IP65 |
| Certifications | UL/cUL Class I, Div. 1, Groups A–G, T4 |
| Sensor Life | 2 years |
| Battery Life | 12 h (pump mode), 24 h (diffusion mode) |
| Power | Two AA alkaline or rechargeable NiMH batteries |
| Weight | 19.4 oz (0.55 kg) |
| Dimensions | 5.5" W × 3.5" H × 2.25" D |
| Display | Backlit LCD |
| Data Logging | None |
| Compliance | Meets requirements for confined space entry per OSHA 1910.146 and ANSI/ASSP Z240.1 |
| Brand | COMECAUSE |
|---|---|
| Model | IN-CL1 |
| Sampling Flow Rate | 2.83 L/min (0.1 cfm) |
| Particle Size Channels | 0.3, 0.5, 1.0, 3.0, 5.0, 10.0 µm |
| Counting Efficiency | ≥50% at 0.3 µm, 100% ±30% at 0.5 µm and 5.0 µm |
| Accuracy (Particle Concentration) | ±30% at 0.5 µm |
| Repeatability (Relative Standard Deviation) | ≤±10% |
| Zero Count Level | ≤1 count per 5 minutes |
| Self-Cleaning Time | ≤10 min |
| Operating Temperature | 15–35 °C |
| Relative Humidity | 10–85% RH (non-condensing) |
| Display | 7-inch color capacitive touchscreen |
| Data Storage Capacity | Up to 100,000 records |
| Connectivity | Wi-Fi 802.11 b/g/n, Bluetooth 4.2, USB Type-A (driver-free U-disk export) |
| Power Supply | Rechargeable Li-ion battery (16.8 V / 5 Ah, 74 Wh) |
| Battery Runtime | ≥6 hours continuous sampling |
| Charging Time | ≤2 hours |
| Printer | Built-in high-speed thermal printer (selectable channel output) |
| Compliance | GB/T 6167–2007, JJF 1190–2008, ISO 14644-1, Fed Std 209E, Annex 1 of EU GMP (2022), USP <788>, FDA 21 CFR Part 11 (audit trail enabled in platform mode) |
| Brand | COMECAUSE |
|---|---|
| Model | IN-CL2 |
| Sampling Flow Rate | 2.83 L/min (0.1 cfm) |
| Particle Size Channels | 0.3, 0.5, 1.0, 3.0, 5.0, 10.0 µm |
| Counting Efficiency | ≥50% at 0.3 µm, ≥100% at ≥0.5 µm |
| Zero Count Level | ≤1 count/5 min |
| Self-Cleaning Time | ≤10 min |
| Size Accuracy | ±30% at 0.5 µm and 5.0 µm |
| Concentration Accuracy | ±30% at 0.5 µm |
| Repeatability | ≤±10% CV |
| Operating Environment | 15–35 °C, 10–85% RH (non-condensing) |
| Data Storage Capacity | Up to 100,000 records |
| Display | 7-inch capacitive color touchscreen |
| Power Supply | Internal rechargeable Li-ion battery (16.8 V / 5 Ah, 74 Wh) |
| Battery Runtime | ≥6 h continuous sampling |
| Charging Time | ≤2 h |
| Communication | Wi-Fi 802.11 b/g/n, Bluetooth 4.2, USB Type-A for direct data export |
| Regulatory Compliance | GB/T 6167–2007, JJF 1190–2008, ISO 14644-1, FS-209E, FDA 21 CFR Part 11 (audit trail enabled) |
| Brand | COMECAUSE |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | IN-CL3 |
| Sampling Flow Rate | 28.3 L/min (1 cfm) |
| Particle Size Channels | 0.3, 0.5, 1.0, 3.0, 5.0, 10.0 µm |
| Self-Cleaning Time | ≤10 min |
| Size Accuracy (0.5 & 5.0 µm) | ±30% |
| Concentration Accuracy (0.5 µm) | ±30% |
| Repeatability | ≤±10% |
| Operating Temperature | 15–35 °C |
| Relative Humidity Range | 10–85% RH |
| Data Storage Capacity | 10,000 records |
| Battery Life | ≥6 h (continuous sampling) |
| Power Supply | AC/DC dual-mode, 16.8 V / 15 Ah Li-ion battery |
| Display | 7-inch color capacitive touchscreen |
| Connectivity | Wi-Fi, Bluetooth, USB flash drive support |
| Calibration Standard | JJF 1190–2008 |
| Performance Verification Standard | GB/T 6167–2007 |
| Cleanroom Classification Support | ISO 14644-1, FS209E, GMP (static/dynamic) |
| Brand | COMECAUSE |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | China |
| Model | IN-SCL |
| Price | ¥6,100 |
| Light Source | Semiconductor Laser (Lifespan >35,000 h) |
| Sampling Flow Rate | 2.83 L/min (±5%) |
| Particle Size Channels | 0.3, 0.5, 1.0, 2.5, 5.0, 10.0 µm |
| Max Count Capacity | 35,000 particles/L (≥0.5 µm) |
| Counting Repeatability | <10% RSD |
| Size Distribution Accuracy | ±30% at 0.5 µm |
| Display | Capacitive Touch LCD |
| Data Storage | 4 GB internal (100,000 records max) |
| Battery | 3.7 V / 10,000 mAh Li-ion (≥8 h operation) |
| Connectivity | Dual USB, Wi-Fi, Bluetooth |
| Environmental Operating Range | 0–40 °C, 10–75% RH |
| Compliance | JJF 1190–2008, GB/T 6167–2007, ISO 14644-1, ISO 209, EU GMP Annex 1 (dynamic/static), USP <788>, FDA 21 CFR Part 11 (audit trail enabled) |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | LDS |
| Pricing | Available Upon Request |
| Brand | Bertin |
|---|---|
| Origin | France |
| Model | Coriolis® μ |
| Sampling Principle | Wetted-Wall Cyclonic Impaction |
| Flow Rate Range | 100–300 L/min |
| Flow Measurement Accuracy | ±2% |
| Sampling Duration | 1–10 min (standard) |
| Operating Temperature | 0–50 °C |
| Operating Relative Humidity | ≤95% RH |
| Cut-Off Diameter (d₅₀) | <0.5 µm |
| Biological Collection Efficiency (Staphylococcus epidermidis ATCC 14990) | 78% |
| Collection Volume | 10–15 mL (fixed at 15 mL for standard operation) |
| Battery Runtime | ~1 h (internal Li-ion) |
| Dimensions | 22 × 33 × 36 cm |
| Weight | 3.0 kg (instrument only, with battery) |
| Certifications | ISO 14698-1 validated (UK HPA), CE, UL, CEM |
| Decontamination | Hydrogen Peroxide (H₂O₂)-compatible |
| Origin | Beijing |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic |
| Model | CPR-KA |
| Pricing | Upon Request |
| Brand | PERIC |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | Domestic (China) |
| Model | Custom Model 11 |
| Pricing | Upon Request |
| Measurement Principle | Infrared Light Scattering |
| Range | 0–5 mg/L |
| Resolution | 0.01 mg/L |
| Adjustable Alarm Threshold | 0.9–2.5 mg/L |
| Communication Interface | RS485 |
| Power Supply | 24 VDC |
| Brand | Cubic |
|---|---|
| Origin | Hubei, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AAG-1000 |
| Negative Ion Output | ≥ 3 × 10⁶ pcs/cm³ |
| Residual Ozone Concentration | ≤ 0.05 ppm |
| Operating Voltage | 21–27 V DC |
| Operating Current | ≤ 30 mA |
| Output High Voltage | –3.5 ± 0.5 kV (1 G) |
| Protection Impedance | 20 ± 2 MΩ |
| Dielectric Withstand Voltage | ≥ 3750 V AC |
| Dimensions | 67.8 × 44.9 × 22 mm (W × H × D) |
| EMC Compliance | ISO 11452-4 & ISO 16750-2 |
| Brand | Cubic |
|---|---|
| Origin | Hubei, China |
| Model | ACDS-1001 |
| Detection Principle | Dual-channel NDIR (Non-Dispersive Infrared) |
| Gas Measured | CO₂ |
| Measurement Range | 0–10,000 ppm (extended capability up to 40,000 ppm) |
| Resolution | 1 ppm |
| Accuracy | ±(50 ppm + 5% of reading) |
| Response Time (T90) | ≤25 s |
| Data Refresh Rate | ≤1 s |
| Output Interface | LIN bus |
| Operating Temperature | −40 °C to +85 °C |
| Storage Temperature | −40 °C to +95 °C |
| Relative Humidity Range | 0–99% RH (non-condensing) |
| Operating Pressure | 80–120 kPa |
| IP Rating | IP54 |
| Supply Voltage | 9–16 VDC (nominal 12 VDC) |
| Average Current Consumption | ≤100 mA @ 12 VDC |
| Standby Current | <100 µA |
| Design Lifetime | 15 years |
| Compliance | AEC-Q200 qualified circuit architecture, automotive-grade EMI/EMC robustness |
| Brand | Cubic |
|---|---|
| Origin | Hubei, China |
| Model | AIS-3200 |
| Detection Gases | PM2.5 (0–1000 µg/m³), CO₂ (400–10,000 ppm) |
| PM2.5 Principle | Laser Scattering |
| CO₂ Principle | Single-Source NDIR with Dual-Channel Detection |
| PM2.5 Accuracy | ±15% of reading or ±15 µg/m³ (−20°C to +75°C, referenced to TSI 8530) |
| CO₂ Accuracy | ±100 ppm or ±10% (400–10,000 ppm, −20°C to +75°C) |
| PM2.5 Response Time (T90) | ≤12 s |
| CO₂ Response Time (T90) | ≤25 s |
| Warm-up Time | <10 s |
| Operating Temperature | PM2.5: −40°C to +75°C |
| CO₂ | −40°C to +85°C |
| Storage Temperature | −40°C to +95°C |
| IP Rating | IP65 |
| Dimensions | Compact, automotive-grade form factor |
| Brand | Cubic |
|---|---|
| Origin | Hubei, China |
| Model | AM1002 |
| Detection Principle | Laser Scattering (PM) / Metal Oxide Semiconductor (VOC) |
| PM Range | 0–5000 µg/m³ |
| VOC Range | 0–10 ppm |
| PM1.0/PM2.5 Accuracy | ±10 µg/m³ (0–100 µg/m³), ±10% reading (101–500 µg/m³) |
| PM10 Accuracy | ±25 µg/m³ (0–100 µg/m³), ±25% reading (101–500 µg/m³) |
| VOC Accuracy | ±15% (@0.3–1 ppm), ±25% (@30 ppm) |
| Warm-up Time | ≤180 s (VOC) |
| Data Refresh Rate | 1 Hz |
| Operating Temp. | −20–60 °C |
| Operating RH | 0–95% RH (non-condensing) |
| Storage Temp./RH | −40–80 °C / 0–95% RH |
| Supply Voltage | DC 5 V ±0.5 V (ripple <50 mV) |
| Interfaces | UART (3.3 V/5 V), I²C (3.3 V/5 V) |
| Dimensions | 38 × 35 × 12 mm |
| Brand | Cubic |
|---|---|
| Origin | Hubei, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AM1008 |
| Price | USD 72 (FOB) |
| PM2.5 Range | 0–1000 µg/m³ |
| CO₂ Range | 400–5000 ppm |
| VOC Scale | 0–3 (Relative Index) |
| Update Interval | 1 s |
| Operating Temperature | −10 °C to +50 °C |
| Storage Temperature | −20 °C to +60 °C |
| Supply Voltage | DC 5 V ±0.1 V |
| Current Consumption | <300 mA |
| Communication Interfaces | UART-TTL, I²C |
| Dimensions | 80 × 50 × 13.6 mm (W×H×D) |
| Brand | Cubic |
|---|---|
| Origin | Hubei, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AM1008L |
| Price | USD 34.50 (FOB) |
| Detection Principle | Laser Scattering (PM), Metal-Oxide Semiconductor (VOC) |
| Particle Size Resolution | 0.3 µm |
| PM Range | 0–1000 µg/m³ |
| VOC Range | 0–10 ppm |
| PM Accuracy | ±10 µg/m³ (≤100 µg/m³), ±10% RDG (>100 µg/m³) for PM1.0/PM2.5 |
| VOC Accuracy | ±0.25 ppm (0–1 ppm), ±25% RDG (1–10 ppm) |
| Refresh Rate | 1 s |
| Operating Temp. | −10 to +50 °C |
| Humidity Range | 5–95% RH (non-condensing) |
| Storage | −20 to +60 °C, 0–95% RH |
| Supply Voltage | DC 5 V ±0.2 V (ripple <100 mV) |
| Operating Current | ≤100 mA |
| Standby Current | ≤200 µA (SET pin low) |
| Interface | UART TTL @ 3.3 V logic level |
| Dimensions | 48 × 40 × 12 mm (W×H×D) |
| Shielding | Full-metal EMI shielding |
| Compliance | RoHS, CE-EMC, FCC Part 15 Subpart B |
| Brand | Cubic |
|---|---|
| Origin | Hubei, China |
| Model | AM1009 |
| Detection Principles | Laser Light Scattering (PM), Metal Oxide Semiconductor (VOC, NOₓ, CO, HC) |
| PM Range | 0–5000 µg/m³ |
| VOC Range | 0–10 ppm |
| NO₂ Range | 0–10 ppm |
| PM Accuracy | ±10 µg/m³ (0–100 µg/m³), ±10% reading (101–500 µg/m³) for PM₁.₀/PM₂.₅ |
| Data Update Interval | 1 s |
| Power-On Stabilization Time | ≤180 s (VOC channel) |
| Operating Temp. | −10 to +60 °C |
| Operating RH | 5–95% RH (non-condensing) |
| Storage Temp./RH | −30 to +70 °C / 0–95% RH (non-condensing) |
| Supply Voltage | DC 5 V ±0.1 V, ripple <50 mV |
| Interfaces | UART (3.3 V / 5 V logic), I²C (5 V logic) |
| Dimensions | 50 × 38 × 21 mm (W × H × D) |
| Brand | Cubic |
|---|---|
| Origin | Hubei, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AM1009CN |
| Detection Principles | Optical Scattering (PM2.5), Electrochemical/Semiconductor (CO), NTC Thermistor (Temperature) |
| Measurement Ranges | PM2.5: 0–5000 µg/m³ |
| CO | 0–1000 ppm |
| Temperature | −10–60 °C |
| Accuracy | PM2.5: ±20% of reading or ±200 µg/m³ |
| CO | ±30% of reading or ±40 ppm |
| Temperature | ±1 °C |
| Alarm Thresholds | PM2.5 ≥ 2000 µg/m³ |
| Data Update Interval | 1 s |
| Operating Conditions | −10–60 °C, 0–95% RH (non-condensing) |
| Storage Conditions | −30–70 °C, 0–95% RH (non-condensing) |
| Supply Voltage | DC 12 V ± 0.5 V, Ripple < 100 mV |
| Average Current Consumption | < 100 mA |
| Output Interface | Digital Switch Output (configurable for CAN bus upon request) |
| Dimensions | 100 × 60 × 24.5 mm (W × H × D) |
| Minimum Detectable Particle Size | 0.3 µm |
| Sampling Method | Constant-Flow Aspiration |
| Calibration | Auto-compensated CO baseline correction |
| Compliance | RoHS-compliant design |
| Brand | Cubic |
|---|---|
| Origin | Hubei, China |
| Manufacturer Type | Authorized Distributor |
| Region of Manufacture | Domestic (China) |
| Model | AM1012 |
| Price | USD 72 (FOB) |
| Detection Parameters | PM2.5 (0–1000 µg/m³), CO₂ (400–2000 ppm), Temperature (−10°C to 50°C), Relative Humidity |
| Refresh Rate | 1 s |
| Power Supply | DC 12 V ±1 V |
| Current Consumption | <500 mA |
| Communication Interface | RS485 |
| Dimensions | 81.3 × 74.3 × 25.9 mm |
| EMC Performance | Built-in voltage regulation, ESD protection (>±8 kV contact discharge), conducted/radiated immunity compliant with IEC 61000-4 series |
| Operating Humidity Range | 0–95% RH non-condensing |
| Brand | Cubic |
|---|---|
| Origin | Hubei, China |
| Model | AM1050 |
| Detection Range | ≥0.3 µm, 0–9,999,999 pcs/L |
| Output Channels | 0.3, 0.5, 1.0, 2.5, 5.0, 10.0 µm |
| Counting Efficiency | 50% @ 0.3 µm |
| Operating Temperature | −30°C to +70°C |
| Storage Temperature | −40°C to +85°C |
| Supply Voltage | DC 5 V ±0.1 V or DC 9–36 V |
| Current Draw | <500 mA @ 5 V, <300 mA @ 9 V, <100 mA @ 36 V |
| Communication Interface | RS-485 / 4–20 mA (customizable) |
| Dimensions | 100 × 115 × 40 mm (W × D × H) |
| Compliance | JJF 1190–2008 Calibration Specification for Airborne Particle Counters |
| Brand | Cubic |
|---|---|
| Origin | Hubei, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AM4203H |
| Pricing | Available Upon Request |
| Measurement Principle | Non-Dispersive Infrared (NDIR) |
| Target Gases | R32, R454A, R454B, R454C, R290 (A2L & A3 refrigerants) |
| Measurement Range | 0–100% LFL |
| Accuracy | ±2.5% LFL (0–25% LFL), ±10% of reading (25–100% LFL) |
| Resolution | 0.1% LFL |
| Response Time (T90) | ≤30 s |
| Output Interfaces | RS485 Modbus RTU, Relay (dry contact) |
| Enclosure Rating | IP54 |
| Operating Temperature | −30 to +70 °C |
| Operating Humidity | 0–95% RH (non-condensing) |
| Storage Conditions | −40 to +85 °C, 0–95% RH (non-condensing) |
| Power Supply | AC 18–36 V (24 V nominal, 55±8 Hz) or DC 12–36 V (24 V nominal) |
| Service Life | >15 years |
| Dimensions | 103.2 × 80 × 30.5 mm (customization available) |
| Brand | Cubic |
|---|---|
| Origin | Hubei, China |
| Model | AM4205 |
| Detection Principle | Non-Dispersive Infrared (NDIR) |
| Detection Range | 0–50% LFL |
| Resolution | 1% LFL |
| Accuracy | ±3.75% LFL |
| Data Refresh Rate | ≤1 s |
| Response Time (T90) | <30 s |
| Warm-up Time (T25) | ≤7 s |
| Output Options | UART / 0.8–4 V (default) / PWM (customizable) |
| Operating Temperature | −30 to +60 °C |
| Operating Humidity | 0–95% RH (non-condensing) |
| Storage Conditions | −30 to +70 °C / 0–95% RH (non-condensing) |
| Supply Voltage | 5 ± 0.1 V DC (ripple <50 mV) |
| Average Current Consumption | ≤150 mA |
| Peak Current | <300 mA |
| IP Rating | IP54 |
| Heating Function | Integrated self-heating element for anti-condensation and frost prevention |
| Brand | Cubic |
|---|---|
| Origin | Hubei, China |
| Model | AM4207 |
| Detection Principle | Non-Dispersive Infrared (NDIR) |
| Measurement Range | 0–50% LFL |
| Accuracy | ±5% LFL |
| Response Time (T50) | ≤10 s |
| Operating Temperature | −40 °C to +85 °C |
| Storage Temperature | −40 °C to +85 °C |
| Humidity Range | 0–100% RH |
| Supply Voltage | DC 9–36 V |
| Current Consumption | <250 mA |
| Communication Interface | CAN bus |
| Protection Rating | IP67 (detector housing), IP65 (sensor head) |
| Brand | Cubic |
|---|---|
| Origin | Hubei, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | Domestic (China) |
| Model | AM4209 |
| Pricing | Available Upon Request |
| Detection Principle | Non-Dispersive Infrared (NDIR) |
| Maximum Sensitivity | 1 g/year (static), 3 g/year (dynamic) |
| Refrigerant Compatibility | HFOs (e.g., 1234yf, 1234ze), A2L-class refrigerants, and common blends (R-134a, R-410A, R-32) |
| Alarm Output | Visual (red LED + LCD bar graph + numeric display), Audible (buzzer), Tactile (vibration) |
| Response Time | <1 second |
| Power Source | Rechargeable Lithium-ion Battery / 10-hour runtime |
| Display | Backlit LCD with real-time concentration readout |
| Operating Environment | 0°C to 40°C (32°F to 104°F), <75% RH (non-condensing) |
| Ingress Protection | IP54 |
| Key Features | High measurement accuracy, long-term stability, rapid response, poison-resistant sensor architecture, electromagnetic interference (EMI) robustness |
| Brand | Cubic |
|---|---|
| Origin | Hubei, China |
| Model | AM6108B |
| Instrument Type | Online Monitoring Controller |
| CO₂ Detection Principle | Non-Dispersive Infrared (NDIR) |
| PM₂.₅ Detection Principle | Optical Scattering |
| Formaldehyde Detection Principle | Electrochemical Sensing |
| Measurement Range | PM₂.₅: 0–1000 µg/m³ |
| CO₂ | 0–5000 ppm |
| Formaldehyde | 0–0.5 mg/m³ (up to 1 mg/m³) |
| Temperature | −10°C to +50°C |
| Relative Humidity | 0–95% RH |
| Data Update Interval | 1 s |
| Operating Voltage | DC 12 V |
| Current Consumption | <140 mA |
| Communication Interface | RS485 |
| Dimensions | 86 mm × 86 mm × 24.9 mm (W×H×D) |
| Mounting Options | Embedded or Wall-Mounted |
| Control Output | Three-Speed Fan Regulation, Supply/Exhaust Switching, Mode Selection (Smart/Manual/Silent/Time-Scheduled) |
| Optional Feature | Filter Replacement Alert |
| Sensor Configuration | Modular — PM₂.₅, CO₂, Formaldehyde, Temperature & Humidity sensors selectable per application requirement |