- All
- Favorite
- Popular
- Most rated
| Brand | LabCompanion |
|---|---|
| Model | SA-45 / SA-60 |
| Temperature Range | RT to +200°C (SA-45) / RT to +300°C (SA-60) |
| Uniformity | ±0.5°C |
| Control Accuracy | ±0.3°C |
| Air Exchange Rate | 1–200 times/hour (selectable) |
| Turntable Speed | 8–10 rpm |
| Internal Dimensions (W×H×D) | 450×450×450 mm (SA-45) / 600×600×600 mm (SA-60) |
| Power Supply | 220 V, single-phase, 5 kW (SA-45) / 7 kW (SA-60) |
| Compliance Standards | ASTM D2436, D573 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | DHG-9003 |
| Price Range | USD 1,400–7,000 (FOB) |
| Maximum Operating Temperature | 300 °C |
| Temperature Range | RT + 10 °C to 300 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Fluctuation | ±1.0 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate | 1.0–3.0 °C/min |
| Temperature Resolution | 0.1 °C |
| Timer Range | 1–9999 minutes |
| Inner Chamber Material | Stainless Steel (AISI 304), TIG-welded |
| Outer Casing | Powder-coated Cold-Rolled Steel |
| Viewing Window | Dual-layer Tempered Glass |
| Air Circulation System | High-temperature Resistant Centrifugal Blower + Optimized Horizontal Airflow Duct Design |
| Ambient Operating Conditions | 5–35 °C, ≤85% RH |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | CS101 |
| Pricing | Available Upon Request |
| Chamber Dimensions (H×W×D) | 750 × 600 × 500 mm |
| External Dimensions (H×W×D) | ≈1230 × 1100 × 680 mm |
| Power Supply | 220 V, 50 Hz |
| Heating Power | 4.0 kW |
| Operating Temperature Range | +10 °C to 250 °C |
| Temperature Uniformity | ±1.6% of setpoint |
| Control Accuracy | ±0.5 °C |
| Heating Rate | RT to 100 °C in ≈15 min |
| Construction | Inner chamber & air ducts — SUS430 stainless steel (≥1.2 mm) |
| Insulation | 80 mm glass wool |
| Heating System | Stainless steel tubular heaters, bottom-mounted |
| Air Circulation | Dual-channel horizontal forced-air convection |
| Controller | Digital PID temperature controller with LED display, keypad input, auto-hold function |
| Sensor | Pt100 platinum resistance thermometer |
| Timer Range | 0.01–99.99 h with audible alarm and automatic heater cutoff |
| Safety Protections | Short-circuit, overload, motor thermal overload, phase-loss protection |
| Standard Accessories | 2 stainless steel wire shelves |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZA-3 |
| Pricing | Available Upon Request |
| Construction | Interior & Exterior Chambers in SUS#304 Stainless Steel |
| Temperature Control System | PID + PWM + SSR with Dual Over-Temperature Protection |
| Temperature Sensor | T-type Thermocouple |
| Temperature Resolution | 0.1 °C |
| Display | LED Digital Interface |
| Chamber Internal Dimensions | 50 × 17 × 40 cm (W×D×H) |
| External Dimensions | 75 × 57 × 50 cm (W×D×H) |
| Test Tray Configuration | Triple-compartment, each 10 × 38 × 10 cm (W×D×H) |
| Safety Features | Low-Water Level Indicator, Steam Venting Port |
| Optional Accessories | Programmable Power-On Scheduler, RO-Purified Water Auto-Fill System |
| Brand | LabCompanion |
|---|---|
| Model | HH-72 |
| Type | Forced-Convection Environmental Test Chamber |
| Internal Volume | 72 L |
| Interior Dimensions (W×D×H) | 450 × 400 × 400 mm |
| Exterior Dimensions (W×D×H) | 905 × 610 × 575 mm |
| Temperature Range | RT + 10°C to 300°C |
| Temperature Uniformity | ±2.5°C |
| Temperature Fluctuation | ±0.1°C at 100°C, ±0.3°C at 200°C |
| Heating Rate | ≤40 min (RT to 100°C) |
| Control System | Microprocessor-based PID Controller with PT100 Sensor |
| Display | Dual LED (Set & Actual Temperature) |
| Timer Range | 0–999 min |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 1.5 kW |
| Construction | Stainless Steel (SUS430) Interior, SECC Cold-Rolled Steel Exterior with Powder Coating |
| Insulation | High-Density Glass Wool + Rock Wool |
| Door Seal | Environmentally Compliant Silicone Rubber Gasket |
| Heating Element | Nickel-Chromium Alloy Sheathed Heater |
| Air Circulation | Forced Convection via Horizontal Centrifugal Fan |
| Ventilation | Adjustable Inlet/Exhaust Ports |
| Safety Features | Over-Temperature Protection, Ground Fault Circuit Interrupter (GFCI), Independent Safety Thermostat |
| Brand | LabCompanion |
|---|---|
| Model | HH-138 |
| Temperature Range | R.T.+10°C to 300°C |
| Temperature Uniformity | ±2.5°C |
| Temperature Fluctuation | ±0.1°C (at 100°C), ±0.3°C (at 200°C) |
| Internal Dimensions (W×D×H) | 450×400×400 mm |
| Internal Volume | 72 L |
| Power Supply | AC 220 V, 50 Hz |
| Heating Power | 1.5 kW |
| Control System | Microprocessor-based PID Controller with LED Digital Display |
| Timer Range | 0–999 min |
| Temperature Sensor | Industrial PT100 Platinum Resistance Thermometer |
| Air Circulation | Forced Convection via High-Temperature Resistant Fan |
| Insulation | Dual-layer insulation with ultra-fine glass wool and rock wool |
| Interior Material | Mirror-finish stainless steel (AISI 304) |
| Exterior Material | Cold-rolled steel with anti-rust treatment and electrostatic powder coating |
| Door Seal | Environmentally compliant silicone rubber gasket |
| Heating Element | Nickel-Chromium Alloy Sheathed Heater |
| Interface | RS485 communication port for data logging and PC connectivity |
| Compliance | Designed per IPC-TM-650 test methodology requirements |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | OVEN-100-4C |
| Temperature Range | RT to 200 °C |
| Temperature Uniformity | ≤2 °C |
| Temperature Fluctuation | ≤±0.5 °C |
| Temperature Deviation | ≤±2.0 °C |
| Heating Rate | 3.5 °C/min (average, no-load, from ambient +20 °C to 200 °C) |
| Internal Dimensions (W×H×D) | 500×500×400 mm |
| Chamber Volume | 100 L per zone |
| Total Zones | 4 independent temperature-controlled chambers |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HH-512 |
| Pricing | Upon Request |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SH-1 |
| Pricing | Upon Request |
| Temperature Range | −20 °C to +150 °C (standard), −40 °C to +150 °C (low-temp variant), −70 °C to +150 °C (ultra-low-temp variant) |
| Temperature Uniformity | ±2 °C |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Range | 30–98 %RH |
| Humidity Uniformity | ±2 %RH (±3 %RH above 75 %RH) |
| Programmable Capacity | 120 programs × 1200 segments, up to 999 cycles, max segment duration: 99 h 59 min |
| Control System | Q8-900 bilingual (English/Chinese) LCD touchscreen controller with PID tuning (9 groups), RS232 standard / RS485 optional |
| Cooling Method | Air-cooled or water-cooled (model-dependent) |
| Refrigeration Unit | French Tecumseh hermetic or German Copeland semi-hermetic compressor |
| Interior Material | SUS304 stainless steel |
| Insulation | High-density polyurethane foam or ultra-fine glass fiber |
| Compliance | GB/T 2423.1–2423.4, GB 10586, GB 10592, IEC 60068-2-1/2/3, MIL-STD-810F (501.4, 502.4, 507.4), JIS C60068-2-1/2/3, JESD22-A101-B/A103-C/A119, GJB 150.9 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HH-5 |
| Power Options | 3.0 kW / 4.0 kW / 6.0 kW |
| Temperature Range | RT+10°C to 300°C or RT+20°C to 450°C |
| Internal Dimensions (W×D×H) | 50×60×75 cm / 70×70×80 cm / 80×80×100 cm |
| External Dimensions (W×D×H) | 67×106×96 cm / 87×116×102 cm / 97×126×129 cm |
| Temperature Uniformity | ±2.5% |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate | ≤70 min (RT+10°C → 300°C) / ≤80 min (RT+20°C → 450°C) |
| Air Exchange Rate | 5–200 cycles/hour |
| Control System | Imported Intelligent PID Controller with Self-Tuning |
| Temperature Sensor | Industrial Platinum Resistance Thermometer (PT100) |
| Display | LED Digital, Simultaneous Setpoint & Actual Temperature |
| Timer Range | 0–999 minutes |
| Safety Features | Independent Over-Temperature Protection, Thermal Cut-Out, Over-Current Circuit Breaker |
| Construction | Inner Chamber – SUS304 Stainless Steel (BN variant) or High-Quality Cold-Rolled Steel with High-Temp Silver Paint (N variant) |
| Insulation | High-Density Polyurethane Foam + Glass Fiber |
| Door Seal | Eco-Friendly Silicone Rubber Gasket |
| Heating Element | Nickel-Chromium Alloy Wire Heater |
| Mobility | Lockable Casters |
| Standard Compliance | JB/T 5520–1991 “Technical Specifications for Drying Ovens” |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HH-138 |
| Temperature Range | Ambient to 260 °C |
| Control Accuracy | ±0.5 °C |
| Heating Ramp Time | ~15 min (Ambient to 100 °C) |
| Interior Material | SUS430 Stainless Steel (≥1.2 mm thickness) |
| Exterior Material | SECC Cold-Rolled Steel with Powder Coating (≥1.5 mm thickness) |
| Insulation | Imported Rock Wool |
| Viewing Window | Dual-Layer Tempered Glass |
| Air Circulation | Forced Horizontal Airflow with 1 HP High-Temperature Motor, Multi-Blade Turbine Fan, and Adjustable Baffle |
| Safety Features | Independent Over-Temperature Protection |
| Controller | PID Microprocessor-Based Digital Controller with Dual PV/SV Display, K-Type Thermocouple Input (CA), SSR Solid-State Relay Output, Honeycomb Heating Element |
| Timer Function | 99.9 s to 999 h |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | PVH-216 |
| Price | Upon Request |
| Max Operating Temperature | 200–300 °C |
| Product Type | Forced-Air Thermal Aging Chamber |
| Classification | Benchtop Aging Chamber |
| Temperature Range | 200–300 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate | (Ambient + 20) °C → 200 °C in ≤40 min |
| Cooling Rate | 1.2 °C/min |
| Internal Chamber Dimensions (W×H×D) | 450 × 450 × 450 mm |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | OVEN-C |
| Temperature Range | +50°C to +200°C |
| Max Operating Temperature | 150°C–200°C (configurable up to 300°C on request) |
| Temperature Uniformity | ±2.0°C |
| Temperature Fluctuation | ±0.5°C |
| Temperature Deviation | ±2.0°C |
| Heating Rate | ≤40 min (from ambient +20°C to 200°C) / ≤60 min (from ambient +20°C to 200°C, depending on chamber volume and insulation configuration) |
| Cooling Rate | 0.7–1.0°C/min |
| Construction Material | SUS304 Stainless Steel Interior |
| Insulation | High-Density Ceramic Fiber Blanket |
| Door Seal | High-Temperature Silicone Rubber Gasket |
| Safety Features | Heater/fan interlock, independent overtemperature protection, motor overcurrent/overheat protection, heater short-circuit protection |
| Control Mode | PID-based temperature controller with optional programmable ramp-soak profiles |
| Airflow Options | Horizontal or vertical forced convection (user-selectable) |
| Compliance | JB/T 5520–1991, GB/T 2423.2–2008, GJB 150.3A–2009 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | OVEN-216 |
| Price Range | USD 1,400 – 3,150 |
| Max Operating Temperature | 200–300 °C |
| Product Type | Hot Air Aging Test Chamber |
| Category | Aging Chamber |
| Temperature Range | Ambient +10 °C to 300 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate | ≤60 min (from ambient +20 °C to 200 °C, no-load) |
| Cooling Rate | 0.7–1.0 °C/min (natural convection cooling) |
| Interior Dimensions (W×H×D) | 600 × 600 × 600 mm |
| Power Supply | 220 V AC, 50/60 Hz |
| Total Power | 3.8 kW |
| Net Weight | 180 kg |
| Brand | LabCompanion |
|---|---|
| Model | HC-1000 |
| Chamber Internal Dimensions | 1000 × 1000 × 1000 mm |
| Temperature Range | –70 °C to +150 °C |
| Temperature Uniformity | ±2 °C |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Deviation | ±2 °C |
| Cooling Rate | 1.0–1.2 °C/min |
| Power Consumption | 12 kW |
| Supply Voltage | AC 380 V, 50 Hz |
| Construction | Stainless steel inner chamber, powder-coated cold-rolled steel outer shell |
| Safety Protections | Over-temperature, over-pressure, and phase-loss monitoring with audible/visual alarm |
| Compliance | GB/T 10589–2008, GB/T 2423.1–2012, GB/T 2423.2–2012, IEC 60068-2-1, IEC 60068-2-2 |
| Brand | LabCompanion |
|---|---|
| Model | HD-235 |
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Power Supply | 220 V, 50 Hz |
| Heating Power | 4.0 kW |
| Operating Temperature Range | Ambient +10 °C to 250 °C |
| Temperature Uniformity | ±1.6% of setpoint |
| Control Accuracy | ±0.5 °C |
| Heating Rate | Ambient to 100 °C in ≈15 min |
| Chamber Dimensions (W×D×H) | 600 × 500 × 750 mm |
| External Dimensions (W×D×H) | 1100 × 680 × 1230 mm |
| Insulation | 80 mm glass wool |
| Heating Element | Stainless steel tubular heaters (bottom-mounted) |
| Air Circulation | Dual-channel horizontal forced-air system |
| Fan Motor | 40 W |
| Temperature Sensor | Pt100 platinum resistance thermometer |
| Controller | Digital PID with LED display, keypad input, auto-tuning |
| Timer Function | 0.01–99.99 h (auto-cut-off + audible alert) |
| Safety Protections | Short-circuit, overload, phase-loss, motor thermal overload, overtemperature cut-off |
| Standard Accessories | 2 stainless steel wire shelves (SUS430, ≥1.2 mm thick) |
| Outer Casing | SECC cold-rolled steel (≥1.5 mm), powder-coated light gray finish |
| Inner Chamber & Air Ducts | SUS430 stainless steel (≥1.2 mm thick) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | P-Series |
| Temperature Range | –20 °C to +150 °C (standard) |
| Humidity Range | 20–98 %RH |
| Temperature Uniformity | ±2 °C |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Uniformity | ±2 %RH (≥75 %RH) |
| Heating Rate | –20 °C → +100 °C in ~80 min |
| Cooling Rate | +20 °C → –20 °C in ~50 min |
| Internal Dimensions (W×H×D mm) | 500×600×500 (150L), 500×750×600 (225L), 600×850×800 (408L), 1000×1000×800 (800L) |
| Refrigeration System | Hermetic or Semi-Hermetic Compressor (Tecumseh/France or Copeland/Germany) |
| Controller | Q8-901 Color Touchscreen PLC-Based Programmable Controller (Bilingual English/Chinese UI) |
| Compliance | GB/T 2423.1–4, GB 10586/10592, IEC 60068-2-1/2/3, MIL-STD-810F (501.4, 502.4, 507.4), JIS C60068-2-1/2/3, JESD22-A101-B/A103-C/A119, GJB 150.9 |
| Brand | LabCompanion |
|---|---|
| Model | HH-3 |
| Origin | Guangdong, China |
| Manufacturer | LabCompanion (OEM/ODM Producer) |
| Category | Environmental Test Chamber – High-Temperature Aging |
| Power Supply | 220 V, 50 Hz |
| Heating Power | 4.0 kW |
| Operating Temperature Range | Ambient +10 °C to 250 °C |
| Temperature Uniformity | ±1.6% of setpoint |
| Chamber Interior Dimensions (H×W×D) | 750 × 600 × 500 mm |
| External Dimensions (H×W×D) | Approx. 1230 × 1100 × 680 mm |
| Insulation | 80 mm glass wool |
| Heating Element | Stainless steel sheathed tubular heater (bottom-mounted) |
| Air Circulation | Dual-channel horizontal forced convection |
| Temperature Controller | Digital PID with LED display, keypad input, auto-hold function |
| Sensor | Pt100 platinum resistance thermometer |
| Timer Range | 0.01–99.99 h (auto-cut-off + audible alert) |
| Safety Protections | Short-circuit, overload, motor thermal overload, and phase-loss protection |
| Standard Accessories | 2 stainless steel wire mesh shelves |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | PSL-800 |
| Price | USD 1,400 (approx.) |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range | 20–98% RH |
| Temperature Uniformity | ≤2.0 °C |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Deviation | ±2 °C |
| Heating Rate (20 °C to +150 °C, non-linear, no-load) | ~3.5 °C/min |
| Internal Dimensions (W×H×D) | 1000×1000×800 mm |
| External Dimensions (W×H×D) | 1480×2050×1240 mm |
| Net Weight | 650 kg |
| Power Supply | AC 380 V / 31.0 A |
| Brand | LabCompanion |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | LP |
| Capacity Options (L) | 80, 120, 150, 225, 408, 800, 1000 |
| Temperature Ranges | H (0 to +150°C), R (−20 to +150°C), L (−40 to +150°C), U (−60 to +150°C), S (−70 to +150°C) |
| Humidity Range | 20–98% RH |
| Temp. Uniformity | ±0.5°C |
| Humidity Uniformity | ±1.0% RH |
| Heating Rate | −20→+150°C ≤60 min |
| Cooling Rate | +20→−70°C ≤80 min |
| Control System | Q8 Touchscreen Controller |
| Refrigeration | Hermetic Twin-Screw Compressor (Tecumseh/Tecumseh-compatible or equivalent, R404A/R507 alternative refrigerant) |
| Construction | Interior – Mirror-Finish SUS304 Stainless Steel |
| Insulation | Rigid Polyurethane Foam + Glass Wool |
| Compliance | GB/T 10586, GB/T 10592, GB/T 2423.1/3/4/34, IEC 60068-2-1/-2/-14, MIL-STD-810D, GJB 150.9 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HH18 |
| Pricing | Available Upon Request |
| Compliance | ISO, ASTM, DIN, JIS, SAE, BS, ANSI, GM, U.S. Federal Standards, GB (China National Standards) |
| Humidity Range | 10–100% RH |
| Condensation Simulation | Q8 Cold-Condensation System |
| Irradiance Control | Electronic Eye® Spectral Irradiance Monitoring |
| Temperature Measurement | Black Panel Thermometer (BPT), High Reproducibility |
| Calibration Traceability | CR-10 Radiometer (Q-Lab Patented, NIST-Traceable) |
| Sample Capacity | 24 pcs @ 75 mm × 300 mm or 48 pcs @ 75 mm × 150 mm |
| Test Cycles | Simultaneous/Sequential Humidity, Condensation, and Water Spray |
| Brand | LabCompanion |
|---|---|
| Model | LH Series |
| Type | High-Temperature Aging Test Chamber |
| Standards Compliance | ASTM D2436, ASTM E145, JIS K630, JIS K7212, CNS 3556, JTTC SPEC-151 |
| Internal Dimensions (L×W×H) | LH-72: 40×40×45 cm |
| LH-150 | 50×50×55 cm |
| Temperature Range | Ambient to 200°C (optional to 300°C) |
| Heating Power | LH-72: 1.8 kW |
| LH-150 | 3.2 kW |
| Rotational Speed | 8–10 rpm |
| Motor Rating | LH-72: 1/4 HP |
| LH-150 | 1/2 HP |
| Air Circulation | Forced convection with axial fan and baffle-guided hot-air flow |
| Weight | LH-72: 80 kg |
| LH-150 | 120 kg |
| External Dimensions (L×W×H) | LH-72: 84×54×100 cm |
| LH-150 | 95×65×113 cm |
| Construction | Double-wall insulated chamber with stainless steel interior (SUS304), aluminized steel exterior, silicone door gasket, over-temperature protection, PID temperature controller with digital display |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HH-235 |
| Temperature Range | RT–260 °C |
| Control Accuracy | ±0.5 °C |
| Chamber Dimensions (H×W×D) | 600×650×600 mm |
| External Dimensions (H×W×D) | ≈1230×1100×680 mm |
| Heating Method | Bottom-mounted stainless steel tubular heaters |
| Air Circulation | Horizontal forced-air convection with adjustable intake vent |
| Insulation | Mineral wool between inner and outer chambers |
| Interior Material | SUS430 stainless steel (≥1.2 mm thick) |
| Exterior Material | SECC cold-rolled steel with powder-coated finish (≥1.5 mm thick) |
| Ramp Time | ~15 min (RT to 100 °C) |
| Safety Protections | Motor overload protection, phase sequence protection, over-temperature cut-off |
| Brand | LabCompanion |
|---|---|
| Model | HH-15 |
| Temperature Range | Ambient to 260 °C |
| Control Accuracy | ±0.5 °C |
| Heating Ramp Time | ~15 min (Ambient to 100 °C) |
| Interior Material | SUS430 Stainless Steel (≥1.2 mm thick) |
| Exterior Material | SECC Cold-Rolled Steel with Powder Coating (≥1.5 mm thick) |
| Insulation | Imported Rock Wool |
| Heating System | Honeycomb-Type Heaters |
| Controller | PID Microprocessor-Based (PV/SV Dual Display, K-Type Thermocouple Input, SSR Solid-State Relay Output) |
| Safety Protection | Independent Over-Temperature Cut-Off |
| Viewing Window | Double-Layer Tempered Glass |
| Air Circulation | Forced Horizontal Airflow with 1 HP High-Temperature Motor and Multi-Blade Turbine Fan |
| Adjustable Baffle Plates | Yes |
| Timer Function | 99.9 s to 999 h, With Temperature-Armed Start and Auto-Heating Termination |
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Producer |
Show next