- All
- Favorite
- Popular
- Most rated
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | GZX1 |
| Power Options | 3.0 kW / 4.0 kW / 6.0 kW |
| Temperature Range | RT+10°C to 300°C or RT+20°C to 450°C |
| Temperature Uniformity | ±2.5% |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate | ≤70 min (RT+10→300°C), ≤80 min (RT+20→450°C) |
| Air Exchange Rate | 5–200 cycles/hour |
| Internal Dimensions (W×D×H, cm) | 50×60×75 |
| External Dimensions (W×D×H, cm) | 67×106×96 |
| Control System | Microprocessor-based PID controller with auto-tuning |
| Temperature Sensor | Industrial-grade PT100 platinum resistance thermometer |
| Display | LED digital display for both setpoint and actual temperature |
| Timer Range | 0–999 minutes |
| Insulation | High-density polyurethane foam + glass fiber |
| Door Seal | Environmentally compliant silicone rubber gasket |
| Heating Element | Ni-Cr alloy wire heater |
| Safety Features | Independent over-temperature protection, thermal cutoff fuse, over-current circuit breaker |
| Standard Compliance | JB/T 5520–1991 Technical Specifications for Drying Ovens |
| Optional Accessories | Programmable temperature controller, RS232/RS485 communication port, chart recorder, additional shelves, observation window, Φ50 cable feedthrough |
| Brand | LabCompanion |
|---|---|
| Model | CS101-E |
| Type | Forced-Air Circulating Drying Oven |
| Temperature Range | R.T.+10°C to 300°C |
| Temperature Uniformity | ±2.5% |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate (to 300°C) | ≤70 min |
| Control System | Microprocessor-based PID Controller with Self-Tuning |
| Temperature Sensor | Industrial Platinum RTD (PT100) |
| Interior Material | SUS304 Mirror-Finish Stainless Steel (BN variant) or Pre-treated Cold-Rolled Steel (EN variant) |
| Insulation | High-Density Ultra-Fine Glass Fiber |
| Viewing Window | Double-Layer Heat-Resistant Tempered Glass |
| Safety Features | Independent Over-Temperature Protection, Over-Current Circuit Breaker |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 1.5 kW (CS101-1EBN), 2.5 kW (CS101-2EBN), 3.0 kW (CS101-3EBC) |
| Internal Volume | 72 L / 137.5 L / 234 L |
| Compliance | JB/T 5520–1991 Technical Specification for Drying Ovens |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | P-Series |
| Pricing | Upon Request |
| Temperature Range | −20 °C to +150 °C (standard) |
| Humidity Range | 30–98% RH |
| Temperature Uniformity | ±2 °C |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Uniformity | ±2% RH (≤75% RH), ±3% RH (>75% RH) |
| Internal Dimensions (W×H×D mm) | 500×600×500 (150 L), 500×750×600 (225 L), 600×850×800 (408 L), 1000×1000×800 (800 L) |
| Cooling Method | Air-cooled or water-cooled (model-dependent) |
| Refrigeration System | Hermetic compressors (Tecumseh France or Embraco/Gaulin Germany) |
| Controller | Q8-900 bilingual (English/Chinese) LCD touch HMI with 120 programs × 1200 segments, up to 999 cycles |
| Compliance | GB 10586-89, GB 10592-89, GB/T 10589-1989, IEC 60068-2-1/-2/-3, MIL-STD-810F (501.4, 502.4, 507.4), JIS C60068-2-1/-2/-3, JESD22-A101-B/A103-C/A119, GB/T 2423.1–2423.4, GJB 150.9-86 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HH15-72 |
| Temperature Range | Ambient to 260 °C |
| Control Accuracy | ±0.5 °C |
| Heating Ramp Time (Ambient to 100 °C) | Approx. 15 min |
| Interior Material | SUS430 Stainless Steel (≥1.2 mm thickness) |
| Exterior Material | SECC Cold-Rolled Steel with Powder Coating (≥1.5 mm) |
| Insulation | Imported Rock Wool |
| Heating System | Honeycomb-Type Heaters |
| Controller | PID Microprocessor-Based with Dual PV/SV Digital Display |
| Input Sensor | K-Type Thermocouple (CA) |
| Output Driver | SSR Solid-State Relay (12 V DC) |
| Safety Features | Independent Over-Temperature Protection |
| Timer Function | 0.1 s–999 h with Auto-Cut-Off on Completion |
| Viewing Window | Double-Layer Tempered Glass |
| Air Circulation | Forced Horizontal Airflow |
| Circulation Motor | High-Temperature Resistant Long-Shaft Motor (1 HP) |
| Fan Type | Multi-Blade Turbine Fan |
| Adjustable Baffle System | Internal Airflow Guidance |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HH-1000 |
| Power Supply | 380 V, 50–60 Hz, 4 kW, 9.2 A |
| Heating Power | 380 V, 3.8 kW, 4.56 A |
| Internal Dimensions (W×D×H) | 900 × 500 × 600 mm |
| External Dimensions (W×D×H) | 1120 × 660 × 1300 mm (including casters and motor) |
| Operating Temperature Range | Ambient +10°C to 180°C (continuous), up to 260°C (intermittent) |
| Temperature Controller | RKC REX-C100 digital PID+R controller with independent over-temperature safety cutoff |
| Safety Features | Dual-stage thermal protection (ALM1 alarm lamp + audible buzzer), phase-loss & phase-sequence protection for motor drive |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer | LabCompanion (OEM/ODM Producer) |
| Model | CS101-1EB |
| Temperature Range | 50°C to 200°C (optional up to 300°C) |
| Temperature Stability | ±1.0°C |
| Temperature Uniformity | ±2.0–3.0°C (standard), ±3.0–4.0°C (larger chambers) |
| Heating Rate | ~50 min (50°C → 200°C) |
| Interior Dimensions (W×D×H, mm) | 400×350×350 |
| Exterior Dimensions (W×D×H, mm) | 610×670×570 |
| Heating Power | 2000 W |
| Air Circulation | Forced-air convection via sirocco fan (90 W × 1) |
| Chamber Material | Interior – AISI 304 stainless steel |
| Insulation | High-density glass wool |
| Safety Systems | Dual overtemperature limit protection, thermal cut-off fuse, no-fuse circuit breaker |
| Standard Accessories | Mechanical timer, 2 adjustable stainless-steel shelves |
| Power Supply | 220 VAC ±10%, 3-phase or single-phase, 50/60 Hz |
| Current Draw | 10.5 A (1Ø), 12.6 A (3Ø) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | GZX |
| Power Options | 3.0 kW / 4.0 kW / 6.0 kW |
| Temperature Range | RT+10°C to 300°C or RT+20°C to 450°C |
| Temperature Uniformity | ±2.5% |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate | ≤70 min (RT+10°C → 300°C) / ≤80 min (RT+20°C → 450°C) |
| Air Exchange Rate | 5–200 cycles/hour |
| Internal Dimensions (W×D×H, cm) | 50×60×75 |
| External Dimensions (W×D×H, cm) | 67×106×96 |
| Control System | Microprocessor-based PID controller with auto-tuning |
| Temperature Sensor | Industrial-grade PT100 platinum resistance thermometer |
| Display | LED digital display for both setpoint and actual temperature |
| Timer Range | 0–999 minutes |
| Construction | Cold-rolled steel outer shell with epoxy powder coating |
| Interior options | SUS304 stainless steel (BN variant) or high-temp silver-painted cold-rolled steel (N variant) |
| Insulation | High-density polyurethane foam + glass fiber composite |
| Door Seal | Eco-friendly silicone rubber gasket |
| Heating Element | Ni-Cr alloy wire heater |
| Safety Features | Independent over-temperature protection, thermal cut-off, over-current circuit breaker |
| Standard Compliance | JB/T 5520–1991 Technical Specifications for Drying Ovens |
| Optional Accessories | Programmable temperature controller, RS232/RS485 communication port, chart recorder, additional shelves, observation window, Φ50 cable feedthrough |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | CS101-E Series (CS101-1EBN / CS101-2EBN / CS101-3EBC) |
| Temperature Range | R.T.+10°C to 300°C |
| Temperature Uniformity | ±2.5% |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate (to 200°C) | ≤70 min |
| Control System | Microprocessor-based PID with Auto-Tuning |
| Temperature Sensor | Industrial-grade PT100 Platinum Resistance Thermometer |
| Heating Element | Nickel-Chromium Alloy Sheathed Heater |
| Air Circulation | Centrifugal Blower with Adjustable Airflow |
| Inner Chamber Material | SUS304 Mirror-Finish Stainless Steel (BN models) or Pre-Painted Cold-Rolled Steel with High-Temp Silver Paint (EN models) |
| Outer Casing | Powder-Coated Cold-Rolled Steel |
| Insulation | High-Density Ultra-Fine Glass Fiber (≥100 mm thickness) |
| Viewing Window | Double-Layer Tempered Heat-Resistant Glass |
| Door Seal | Environmentally Compliant Silicone Rubber Gasket |
| Exhaust Port | Φ45 mm × 1 (rear-mounted) |
| Safety Features | Independent Over-Temperature Cut-Off, Thermal Fuse, and Circuit Breaker with Over-Current Protection |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 1.5 kW / 2.5 kW / 3.0 kW |
| Internal Volume | 72 L / 137.5 L / 234 L |
| Standard Accessories | 2 Stainless Steel Shelving Plates + 4 Adjustable Shelf Supports + Full Technical Manual |
| Optional Upgrades | Programmable Ramp-Soak Controller, RS485 Modbus Interface, Cable Entry Ports, Additional Shelving Kits |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | 20L |
| Instrument Type | General-Purpose Drying Oven |
| Temperature Range | RT +10°C to 300°C |
| Temperature Uniformity | ±0.5°C |
| External Dimensions (W×D×H) | 1195×890×2060 mm |
| Internal Chamber Dimensions (W×D×H) | 940×700×1400 mm |
| Chamber Material | Stainless Steel (AISI 304) or Galvanized Steel |
| Heating Method | Forced-Air Convection / Thermal Oil Heating |
| Power Supply | AC 220 V, 50 Hz (Internal Heating) |
| Temperature Resolution | 0.1°C |
| Temperature Stability | ±0.5°C at Setpoint |
| Programmable Timer Range | 1–9999 minutes/hours |
| Optional Controller | Intelligent LCD Programmable Controller (‘D’ Series) |
| Brand | LabCompanion |
|---|---|
| Model | HH-72 |
| Type | Forced-Air Constant-Temperature Drying Oven |
| Temperature Range | Ambient +5°C to 300°C |
| Temperature Stability | ±1°C |
| Temperature Uniformity | ±1.5°C (at 100°C, steady state) |
| Internal Chamber Dimensions (W×H×D) | 450 × 400 × 400 mm |
| External Dimensions (W×H×D) | 610 × 905 × 575 mm |
| Interior Material | Mirror-Finish Stainless Steel (SUS304) |
| Exterior Material | Powder-Coated Cold-Rolled Steel |
| Insulation | High-Density Compressed Glass Wool (≥80 mm thickness) |
| Heating System | Finned Tubular Heaters with Aluminum Heat Sinks |
| Air Circulation | Adjustable-Speed Centrifugal Blower + Optimized Baffle-Style Airflow Ducts |
| Control System | Microprocessor-Based PID Temperature Controller with Dual-Line LED Display (Setpoint & Actual Temp), Auto-Tuning Function, Timer with Audible Alarm |
| Safety Protections | Bimetallic Liquid-Expansion Over-Temperature Cut-Off, Dual-Stage Over-Temp Protection (Alarm + Power Cut-off), MCCB Circuit Breaker, Ceramic Fuse, Non-Fuse Switch |
| Power Supply | 3-phase 380 VAC ±10% / 50 Hz or Single-Phase 220 VAC ±10% / 50 Hz |
| Standard Accessories | 2–6 Adjustable Stainless Steel Shelves |
| Optional | Programmable Controller (RS485 Modbus RTU), Data Logging Module, Ethernet Interface, GLP/GMP Audit Trail Firmware |
| Brand | LabCompanion |
|---|---|
| Model | HD/HH Series |
| Temperature Range | Ambient +5°C to 300°C |
| Temperature Stability | ±1°C |
| Temperature Uniformity | ±1.5°C |
| Interior Dimensions (W×H×D) | 450×400×400 mm |
| Exterior Dimensions | 610×905×575 mm |
| Interior Material | Mirror-Finish Stainless Steel |
| Exterior Material | Powder-Coated Steel |
| Insulation | High-Density Compressed Glass Wool |
| Heating System | Finned-Tube Electric Heaters |
| Air Circulation | Forced-Air Convection with Optimized Outlet Design |
| Power Supply | 3-Phase 380 VAC ±10% or Single-Phase 220 VAC ±10% |
| Safety Protections | Bimetallic Over-Temperature Cut-Off, MCCB Overload Protection, Dual-Stage Thermal Alarm (Alarm → Cut-off), Fuse-Protected Circuit |
| Controller | Microprocessor-Based PID Temperature Controller with Setpoint & Real-Time Display |
| Accessories | 2–6 Adjustable Stainless Steel Shelves |
| Optional | Time-Based Auto-Shutdown, Programmable Ramp-Soak Profiles |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | CS101-E |
| Pricing | Upon Request |
| Temperature Range | R.T.+10°C to 300°C |
| Temperature Uniformity | ±2.5% |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate (to 200°C) | ≤70 min |
| Control Method | PID with PT100 Sensor |
| Display | LED Digital (Set & Actual Temp) |
| Timer Range | 0–999 min |
| Interior Material | SUS304 Mirror-Finish Stainless Steel (BN variant) or Pre-treated Cold-Rolled Steel (EN variant) |
| Insulation | Ultra-Fine Glass Fiber |
| Viewing Window | Double-Layer Heat-Resistant Tempered Glass |
| Air Circulation | Centrifugal Blower with Condenser Motor |
| Heating Element | Nickel-Chromium Alloy Sheathed Heater |
| Safety Features | Independent Over-Temperature Protection, Thermal Cut-Out Circuit Breaker |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 1.5 kW |
| Internal Dimensions (W×D×H) | 450×400×400 mm |
| Internal Volume | 72 L |
| Compliant With | JB/T 5520–1991 “Technical Specifications for Drying Ovens” |
| Brand | LabCompanion |
|---|---|
| Model | PH |
| Type | Precision Forced-Convection Drying Oven |
| Temperature Range | Ambient +10°C to 300°C |
| Temperature Uniformity | ±2.5% |
| Temperature Fluctuation | ±0.5°C |
| Internal Dimensions (W×D×H) | 340 × 320 × 320 mm |
| External Dimensions (W×D×H) | 530 × 620 × 490 mm |
| Chamber Material | SUS304 Stainless Steel (≤300°C) or Galvanized Steel |
| Heating Method | Forced-Air Circulation with Nichrome Wire Heaters |
| Control System | Microprocessor-Based PID Controller with PT100 Sensor |
| Timer Range | 0–999 min |
| Power Supply | AC 220 V, 50 Hz |
| Compliance | JB/T 5520–1991 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer | LabCompanion (OEM/ODM Capable) |
| Type | General-Purpose Forced-Convection Drying Oven |
| Temperature Range | RT +10°C to 300°C |
| Temperature Uniformity | ±0.5°C (at 100°C, steady state) |
| External Dimensions (W×D×H) | 1195 × 890 × 2060 mm |
| Internal Chamber Dimensions (W×D×H) | 940 × 700 × 1400 mm |
| Chamber Material | 1Cr18Ni9Ti Stainless Steel (AISI 304 equivalent) |
| Heating Method | Horizontal Forced-Air Circulation with Dual-Side Heaters |
| Power Supply | AC 220 V / 50 Hz (Internal Heating), AC 380 V / 50 Hz (Optional External Heating Circuit) |
| Temperature Resolution | 0.1°C |
| Temperature Stability | ±0.5°C (measured at center point per ISO 17025-compliant validation protocol) |
| Timer Range | 1–9999 minutes/hours |
| Controller | Standard PID Digital Controller (D-Series Optional: Programmable LCD Controller with Ramp-Soak Profiles & Data Logging) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | CS101-E |
| Pricing | Upon Request |
| Circulation Method | Forced Convection |
| Temperature Range | R.T. +10°C to 300°C |
| Temperature Fluctuation | ±0.5°C |
| Temperature Uniformity | ±2.5% |
| Heating Rate (to 200°C) | ≤70 min |
| Control System | PID Digital Controller with Self-Tuning |
| Temperature Sensor | Industrial Platinum RTD (PT100) |
| Display | Dual LED Display (Set & Actual Temperature) |
| Timer Range | 0–999 min |
| Interior Material | SUS304 Mirror-Finish Stainless Steel (BN variant) or Pre-Painted Cold-Rolled Steel with High-Temp Silver Coating (EN variant) |
| Exterior Material | Powder-Coated Cold-Rolled Steel with Anti-Rust Treatment |
| Viewing Window | Double-Layer Heat-Resistant Tempered Glass |
| Insulation | Ultra-Fine Glass Fiber |
| Door Seal | Eco-Friendly Silicone Rubber Gasket |
| Exhaust Port | Φ45 mm × 1 (Rear-Mounted) |
| Blower | Centrifugal Fan with Condenser Motor |
| Heating Element | Nickel-Chromium Alloy Sheathed Heater |
| Safety Features | Independent Over-Temperature Protection Circuit & Over-Current Trip Breaker |
| Internal Dimensions (W×D×H, mm) | 450×400×400 / 550×500×500 / 650×600×600 |
| External Dimensions (W×D×H, mm) | 610×575×905 / 710×675×1025 / 810×775×1175 |
| Capacity | 72 L / 137.5 L / 234 L |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 1.5 kW / 2.5 kW / 3.0 kW |
| Standard Compliance | JB/T 5520–1991 (Technical Specifications for Drying Ovens) |
| Accessories Included | 2 Stainless Steel Shelves, 4 Shelf Supports, Full User Manual |
| Optional Accessories | Additional Shelves, Programmable Temperature Controller, Cable Port (Φ50 mm), RS485 Communication Interface |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | CS101-1EBN |
| Temperature Range | R.T.+10°C to 300°C |
| Temperature Uniformity | ±2.5% |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate | ≤70 min (to 300°C) |
| Control System | PID with PT100 Sensor |
| Display | LED digital (set & actual temperature) |
| Timer Range | 0–999 min |
| Interior Material | SUS304 mirror-finish stainless steel |
| Exterior Material | Powder-coated cold-rolled steel |
| Insulation | Ultra-fine glass fiber |
| Viewing Window | High-temperature tempered glass |
| Door Seal | Eco-friendly silicone rubber |
| Exhaust Port | Φ45 mm (rear-mounted) |
| Heating Element | Nickel-chromium alloy wire |
| Safety Features | Independent over-temperature protection, over-current protection |
| Internal Dimensions (W×D×H) | 450×400×400 mm |
| External Dimensions (W×D×H) | 610×575×905 mm |
| Net Volume | 72 L |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 1.5 kW |
| Compliance | JB/T 5520–1991 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model Designation | Custom-Engineered (e.g., LCO-XX Series) |
| Pricing | Available Upon Technical Specification Review |
| Brand | LabCompanion |
|---|---|
| Model | FO-8000 |
| Temperature Range | 100–800 °C |
| Chamber Dimensions (W×H×D) | 300×200×120 mm |
| External Dimensions (approx.) | 450×450×580 mm |
| Control System | Microprocessor-Based PID Controller with Digital Keypad Input |
| Heating Element | Embedded Ceramic Heating Plates with Kanthal A1 Resistance Wire |
| Insulation | Lightweight Ceramic Fiber Liner (Dual-Layer Shell) |
| Safety Features | Automatic Spring-Loaded Door, Over-Temperature Protection, Thermal Cut-Out, Ground Fault Detection |
| Compliance | Designed for GLP/GMP-aligned laboratory workflows |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | CS101-1EB |
| Temperature Range | 50 °C to 200 °C (optional up to 300 °C) |
| Temperature Stability | ±1.0 °C |
| Temperature Uniformity | ±2.0–3.0 °C (standard), ±3.0–4.0 °C (larger chambers) |
| Heating Time | ~50 min (50 °C → 200 °C) |
| Interior Dimensions (W×D×H, mm) | 400 × 350 × 350 |
| Exterior Dimensions (W×D×H, mm) | 610 × 670 × 570 |
| Heating Power | 2000 W |
| Air Circulation | Sirocco fan (90 W, 1 unit) |
| Interior Material | Stainless steel (SUS304) |
| Exterior Material | Powder-coated steel plate |
| Insulation | Glass wool |
| Safety Features | No-fuse breaker, over-temperature limit switch, protection fuse |
| Standard Accessories | Mechanical timer, 2 adjustable stainless-steel shelves |
| Power Supply | 220 VAC ±10%, 3-phase or single-phase, 50/60 Hz |
| Current Rating | 10.5 A (3Ø) / 12.6 A (1Ø) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | LabCompanion Custom Series |
| Pricing | Available Upon Request |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | RP Series |
| Temperature Range | −20 °C to 150 °C (RP-150) |
| Humidity Range | 30–98% RH |
| Temperature Uniformity | ±2 °C |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Uniformity | ±2/−3% RH (≥75% RH) |
| Internal Dimensions (W×H×D mm) | 500×600×500 (RP-150), 500×750×600 (RP-225), 600×850×800 (RP-408), 1000×1000×800 (RP-800) |
| Cooling Method | Air-cooled (RP-150/RP-225) |
| Refrigeration System | French Tecumseh hermetic or German Copeland semi-hermetic compressors |
| Controller | Imported bilingual (English/Chinese) LCD touch-screen programmable temperature & humidity controller |
| Heating Element | Ni-Cr alloy resistance heater |
| Humidifier | Stainless-steel sheathed surface-evaporation type |
| Inner Chamber Material | SUS304 stainless steel |
| Insulation | Ultra-fine glass fiber or polyurethane foam |
| Compliance | GB 10586-89, GB 10592-89, GB/T 10589-1989, IEC 60068-2-3, IEC 60068-2-1/2, MIL-STD-810F (501.4, 502.4, 507.4), JIS C60068-2-1/2/3, JESD22-A101-B, A103-C, A119, GB/T 2423.1–4, GJB 150.9 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | CS101-E |
| Temperature Range | R.T.+10°C to 300°C |
| Temperature Uniformity | ±2.5% |
| Temperature Fluctuation | ±0.5°C |
| Heating Method | Nickel-Chromium Alloy Heaters |
| Control System | PID Digital Controller with PT100 Sensor |
| Air Circulation | Forced Convection (Centrifugal Blower) |
| Interior Material | SUS304 Mirror-Finish Stainless Steel (BN variant) or Pre-treated Cold-Rolled Steel (EN variant) |
| Insulation | High-Density Fiberglass |
| Safety Features | Over-Temperature Protection, Over-Current Circuit Breaker |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 1.5 kW |
| Internal Volume | 72 L |
| Interior Dimensions (W×D×H) | 450 × 400 × 400 mm |
| Exterior Dimensions (W×D×H) | 610 × 575 × 905 mm |
| Standard Accessories | 2 Stainless Steel Shelves, 4 Shelf Supports, User Manual |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | HH6 |
| Pricing | Upon Request |
| Temperature Range | RT+10°C to 200°C / RT+10°C to 300°C (selectable) |
| Control Accuracy | ±1% of full scale |
| Temperature Uniformity | ±1°C (at setpoint, empty chamber, 25°C ambient) |
| Temperature Resolution | 0.1°C |
| Timer Range | 1–9999 minutes |
| Heating System | Independent Ni-Cr alloy sheathed heaters |
| Air Circulation | Vertical forced convection via high-temp low-noise motor + multi-blade centrifugal impeller |
| Safety Protections | Over-temperature cut-off, leakage current protection, short-circuit protection, motor overheat protection, over-current protection |
| Power Supply | AC 220V 50Hz or AC 380V 50Hz |
| Standard Shelving | 2 stainless steel shelves |
| Chamber Liner | Mirror-finish or brushed stainless steel (argon arc welded) |
| Exterior Finish | Powder-coated steel |
| Compliance | JB/T 5520–1991 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HH-14 |
| Voltage | 3-phase 380 VAC ±10% or single-phase 220 VAC ±10% |
| Interior Dimensions (W×H×D) | 450×400×400 mm / 550×500×500 mm / 650×600×600 mm |
| Exterior Dimensions | 610×905×575 mm / 710×1025×675 mm / 810×1175×775 mm |
| Chamber Material | Mirror-finish stainless steel (SUS304) |
| Exterior Material | Powder-coated cold-rolled steel |
| Insulation | High-efficiency compressed glass wool |
| Temperature Range | Ambient +5°C to 200°C |
| Temperature Uniformity | ±1.5°C |
| Temperature Stability | ±1°C |
| Heating System | Finned tubular electric heaters |
| Air Circulation | Forced convection with adjustable multi-directional air outlets |
| Safety Protections | Dual-stage overtemperature cutoff (ALM1 alarm + ALM2 power cut), thermal fuse, MCCB overload protection, auto-tuning PID controller, post-heating fan delay shutdown |
| Accessories | 2–6 adjustable stainless steel shelves |
| Compliance | Designed for GLP-compliant laboratory environments |
Show next