- All
- Favorite
- Popular
- Most rated
| Brand | Froilabo |
|---|---|
| Origin | Guangdong, China (Distributed by Hongzhan Technology Co., Ltd.) |
| Model | Dragon |
| Temperature Range | −80 °C to +250 °C |
| Transition Time | −55 °C ↔ +125 °C in 7 s / 14 s |
| Airflow Rate | 2.2–8.4 L/s |
| Temperature Stability | ±0.1 °C |
| Control Interface | Touchscreen HMI |
| Programmable Profiles | 45 stored programs, up to 20 steps each |
| Compliance | JEDEC JESD22-A104, MIL-STD-883 Method 1010, MIL-STD-750 Method 1037 |
| Operating Modes | Manual, Automatic, Editable Sequence |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | GZX1 |
| Power Options | 3.0 kW / 4.0 kW / 6.0 kW |
| Temperature Range | RT+10°C to 300°C or RT+20°C to 450°C |
| Temperature Uniformity | ±2.5% |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate | ≤70 min (RT+10→300°C), ≤80 min (RT+20→450°C) |
| Air Exchange Rate | 5–200 cycles/hour |
| Internal Dimensions (W×D×H, cm) | 50×60×75 |
| External Dimensions (W×D×H, cm) | 67×106×96 |
| Control System | Microprocessor-based PID controller with auto-tuning |
| Temperature Sensor | Industrial-grade PT100 platinum resistance thermometer |
| Display | LED digital display for both setpoint and actual temperature |
| Timer Range | 0–999 minutes |
| Insulation | High-density polyurethane foam + glass fiber |
| Door Seal | Environmentally compliant silicone rubber gasket |
| Heating Element | Ni-Cr alloy wire heater |
| Safety Features | Independent over-temperature protection, thermal cutoff fuse, over-current circuit breaker |
| Standard Compliance | JB/T 5520–1991 Technical Specifications for Drying Ovens |
| Optional Accessories | Programmable temperature controller, RS232/RS485 communication port, chart recorder, additional shelves, observation window, Φ50 cable feedthrough |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | UV1 |
| Pricing | Upon Request |
| Temperature Range | RT+10 to 70 °C |
| Humidity Range | ≥90% RH |
| Sample-to-Lamp Distance | 50 ± 2 mm |
| Lamp Center-to-Center Spacing | 70 mm |
| Irradiance | UVA-340 @ 0.68 W/m², UVB-313 @ 0.60 W/m² |
| Interior Dimensions | 1170 × 450 × 500 mm (W×D×H) |
| Exterior Dimensions | 1300 × 550 × 1380 mm (W×D×H) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | TS3-2 |
| High-Temperature Range | +150 °C |
| Low-Temperature Range | −65 °C |
| Thermal Shock Range | −65 °C to +150 °C |
| Heating Rate | +60 °C to +200 °C ≤ 20 min |
| Cooling Rate | +20 °C to −75 °C ≤ 60 min |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model Series | FT-40/FT-50/FT-60, LT-40/LT-50/LT-60, TT-40/TT-50/TT-60 |
| Temperature Range (Test Zone) | −35 °C to 150 °C (FT), −55 °C to 150 °C (LT), −65 °C to 150 °C (TT) |
| Temperature Transition Method | Static Specimen with Dual- or Triple-Zone Air-Switching |
| Temp. Rise Time (−35 → +150 °C) | 30–40 min |
| Temp. Fall Time (+150 → −35 °C) | 60–80 min |
| Temperature Stabilization Time | 5–10 min |
| Test Chamber Volume | 35–60 L |
| External Dimensions | 140–220 cm (H/W/D) |
| Payload Capacity | 2.2–7.5 kg |
| Refrigeration System | Single-stage (FT) or Dual-stage (LT/TT) |
| Condensation | Air-cooled or Water-cooled |
| Refrigerant | HFC-based Eco-friendly Refrigerant |
| Control System | Microprocessor-based Programmable Controller with PID + SSR Regulation |
| Chamber Material | SUS304 Stainless Steel |
| Safety Protections | Compressor Overload Protection, High/Low Pressure Switches, Controller Overcurrent Protection |
| Brand | LabCompanion |
|---|---|
| Model | LC-225A |
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Power Supply | AC 220V±10% / 50Hz or AC 380V±10% / 50Hz |
| Temperature Range | −40°C to +100°C (optional +150°C) |
| Temperature Uniformity | ≤2°C |
| Temperature Fluctuation | ±0.5°C (high-temp), ±1.0°C (low-temp) |
| Heating Rate | ≥2–3°C/min |
| Cooling Rate | ≤1°C/min |
| Internal Dimensions (W×H×D) | 500×600×500 mm |
| Insulation Material | High-Density Micronized Mineral Wool |
| Air Circulation | Stainless Steel Impeller, Single-Cycle Forced Convection |
| Safety Protections | Leakage Current Protection, Compressor High-Pressure & Overheat Protection, Motor Overcurrent & Thermal Cut-off, Fuse-Based Overload Protection, Audible Alarm |
| Brand | LabCompanion |
|---|---|
| Model | SA-45 / SA-60 |
| Temperature Range | RT to +200°C (SA-45) / RT to +300°C (SA-60) |
| Uniformity | ±0.5°C |
| Control Accuracy | ±0.3°C |
| Air Exchange Rate | 1–200 times/hour (selectable) |
| Turntable Speed | 8–10 rpm |
| Internal Dimensions (W×H×D) | 450×450×450 mm (SA-45) / 600×600×600 mm (SA-60) |
| Power Supply | 220 V, single-phase, 5 kW (SA-45) / 7 kW (SA-60) |
| Compliance Standards | ASTM D2436, D573 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | OVEN-128 |
| Temperature Range | RT+10°C to 300°C |
| Temperature Uniformity | ±1.0°C (at setpoint, measured at 9 points per IEC 60068-3-5) |
| Chamber Dimensions (W×H×D) | 450 mm × 550 mm × 520 mm |
| Internal Volume | 128 L |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | CTL-180A |
| High-Temperature Range | +60 °C to +200 °C |
| Low-Temperature Range | 0 °C to −70 °C |
| Thermal Shock Range | −40 °C to +150 °C |
| Temperature Stability | ±2 °C |
| Heating Rate | R.T. → +200 °C in ~40 min |
| Cooling Rate | R.T. → −70 °C in ~60 min |
| Internal Dimensions (W×H×D) | 600 × 660 × 450 mm |
| External Dimensions (W×H×D) | 2920 × 1100 × 2150 mm |
| Transfer Time | ≤5 s |
| Temperature Recovery Time | ≤5 min |
| Temperature Uniformity | ≤±2 °C (−65 °C to +150 °C) |
| Temperature Fluctuation | ≤±0.5 °C (per GB/T 5170.1–1996) |
| Construction | Exterior — Powder-coated cold-rolled steel |
| Refrigeration System | Air-cooled or water-cooled (optional), equipped with imported compressors |
| Temperature Sensor | Armored Pt100 RTD |
| Controller | Siemens PLC module integrated with LabCompanion PlatinumV1.0 embedded control software + 7-inch color TFT touch screen interface |
| Data Interface | USB port (CSV logging of setpoints, actual values, timestamps |
| Power Supply | AC 380 V, 50 Hz, 3-phase 4-wire + PE |
| Total Installed Capacity | 36 kVA |
| Compliance | GJB 150.3–150.5, GB/T 2423.1–2423.2 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | PL-800 |
| Instrument Type | Benchtop |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range | 20 % to 98 % RH |
| Temperature Uniformity | ≤ ±2 °C |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Uniformity | ±2.5 % RH |
| Humidity Fluctuation | ±3 % RH |
| Heating Rate (non-linear, no-load) | ~3.5 °C/min (20 °C to +150 °C) |
| Internal Dimensions (W×D×H) | 1000 mm × 1000 mm × 800 mm |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | RZ-80 |
| Pricing | Available Upon Request |
| Temperature Range | -20°C to +150°C |
| Temperature Uniformity | ≤ ±2°C |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate | -20°C to 100°C in ~35 min |
| Cooling Rate | +20°C to -20°C in ~45 min |
| Humidity Range | 30–95% RH |
| Humidity Fluctuation | ±2.5% RH |
| Humidity Accuracy | ±3% RH (>50% RH), ±5% RH (≤50% RH) |
| Internal Dimensions (W×H×D) | 40×50×40 cm |
| External Dimensions (W×H×D) | 94×86×83 cm |
| Inner Chamber Material | SUS#304 Stainless Steel |
| Insulation | Rigid Polyurethane Foam |
| Refrigeration System | Hermetic Compressor (Imported from Europe/America), Eco-friendly Refrigerant |
| Control System | Korean-Made PID-Based Programmable Controller with LCD Interface, LAN Optional |
| Sensor | PT100 Platinum Resistance Thermometer |
| Display Resolution | 0.1°C / 1% RH |
| Compliance | Designed for ISO/IEC 17025-aligned environmental testing workflows, supports GLP/GMP documentation readiness |
| Brand | LabCompanion |
|---|---|
| Model | HP-150 |
| Temperature Range | -70°C to +150°C (selectable variants: -20°C, -40°C min) |
| Humidity Range | 20–98% RH |
| Temp. Uniformity | ±2°C |
| Temp. Stability | ±0.5°C |
| Humidity Stability | ±1% RH |
| Heating Rate | -70°C → +150°C ≤ 90 min |
| Cooling Rate | +20°C → -70°C ≤ 80 min |
| Controller | OYO (Japan) or TEMI (Korea) Touchscreen HMI |
| Refrigeration | Hermetic Twin-Screw Compressor (Tecumseh/Tecumseh-type), Eco-friendly Refrigerant R404A/R23 Cascade System |
| Insulation | Rigid Polyurethane Foam + Glass Wool |
| Interior Material | Mirror-Finish SUS304 Stainless Steel |
| Exterior Material | Powder-Coated Steel or SS304 |
| Power Supply | 3φ5W 380VAC ±10% or 2φ3W 220VAC ±10% |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | P-Series |
| Temperature Range | −20 °C to +150 °C (standard) |
| Humidity Range | 30–98% RH |
| Temperature Uniformity | ±2 °C |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Uniformity | ±2% RH (≤75% RH), ±3% RH (>75% RH) |
| Programmable Steps | Up to 1200 segments across 120 programs |
| Cycle Repetition | Up to 999 cycles |
| Segment Duration | Max 99 h 59 min per segment |
| Control System | Q8-900 bilingual (English/Chinese) LCD touchscreen HMI |
| Communication Interfaces | Standard RS-232 |
| PID Tuning | 9 independent parameter sets |
| Compliance | GB/T 2423.1–4, GB 10586, GB 10592, IEC 60068-2-1/2/3, MIL-STD-810F (501.4, 502.4, 507.4), JIS C60068-2-1/2/3, JESD22-A101-B/A103-C/A119, GJB 150.9 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | PR-800 |
| Instrument Type | Vertical |
| Condensation Method | Air-Cooled |
| Temperature Range | -20°C to +150°C |
| Humidity Range | 20–98% RH |
| Temperature Uniformity | ≤ ±2°C |
| Temperature Fluctuation | ±1°C (High Temp), ±2°C (Low Temp) |
| Humidity Uniformity | ±3% RH (>75% RH), ±5.0% RH (≤75% RH) |
| Humidity Fluctuation | ±0.5% RH |
| Heating Rate | 3.0–3.5°C/min |
| Internal Chamber Dimensions (W×D×H) | 1000 × 1000 × 800 mm |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | TH-1000-20 |
| Instrument Type | Benchtop |
| Humidity Range | 20–98% RH |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Deviation | ±3.0% RH (<75% RH) |
| Heating Rate Options | 5, 10, 15, 20, or 25 °C/min (linear or non-linear ramp profiles) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer | Hongzhan Technology Co., Ltd. |
| Model | TH-800-12 |
| Temperature Range | −70 °C to +150 °C |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Deviation | ±2.0 °C |
| Temperature Uniformity | ≤2.0 °C |
| Heating Rate | 1–25 °C/min (linear or non-linear) |
| Cooling Rate | 1–25 °C/min (linear or non-linear) |
| Internal Chamber Dimensions | 1000 mm × 1000 mm × 800 mm |
| Brand | LabCompanion |
|---|---|
| Model | TS Series |
| Type | Three-Zone (Hot/Cold/Test) Pneumatically Actuated Thermal Shock Chamber |
| Temperature Range | −65 °C to +200 °C |
| Temperature Transition | RT → −65 °C in ≤70 min |
| Test Zone Temp. Range | −55 °C to +150 °C (TS40/TS55 variants) |
| Temp. Uniformity | ±2 °C |
| Recovery Time | ≤5 min |
| Control System | 7.5″ TFT Color Touchscreen with PID Algorithm, 96 Programmable Profiles |
| Refrigeration | Dual-Stage Mechanical Cascade (R-507/R-23), Air- or Water-Cooled Condenser |
| Construction | SUS304 Interior, Powder-Coated Steel Exterior, Polyurethane + Glass Wool Insulation |
| Compliance | GB/T 2423.1, GB/T 2423.2, GB/T 2423.22, GJB 150.5, GJB 360.7, GJB 367.2-87 Clause 405 |
| Power Supply | AC 380 V ±10%, 50 Hz, 3P+PE |
| Safety | Dual Over-Temp Protection (Chamber & Compressor), Pressure Switches, Leakage Circuit Breaker, Fan Motor Thermal Relay, Emergency Stop |
| [Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | Q8/UV Series |
| UV Lamps | UVA-340 / UVB-313 / UVA-351 |
| Irradiance Control | Optional (1.0 W/m² @ 340 nm, 1.1 W/m² @ 313 nm) |
| UV Temperature Range | 50–75 °C |
| Condensation Temperature Range | 40–60 °C |
| Test Capacity | Up to 48 specimens (75 × 150 mm) |
| Water Consumption | 8 L/day (distilled water) |
| Dimensions (W×D×H) | 137 × 53 × 136 cm |
| Weight | 136 kg |
| Power Supply | 1φ, 120 V/60 Hz (16 A) or 230 V/50 Hz (9 A), max. 1800 W |
| Compliance | ASTM G153, ASTM G154, ASTM D4329, ASTM D4587, ASTM D4799, SAE J2020, ISO 4892] |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer | Hongzhan Technology Co., Ltd. |
| Model | TC-400-10 |
| Temperature Range | −70 °C to +150 °C |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ≤2.0 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate | 1–25 °C/min (linear or non-linear) |
| Cooling Rate | 1–25 °C/min (linear or non-linear) |
| Interior Dimensions (W×D×H) | 800 mm × 850 mm × 600 mm |
| Brand | Froilabo / LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Classification | Domestic (China) |
| Model | Froilabo Dragon Series |
| Pricing | Available Upon Request |
| Temperature Range | −80 °C to +250 °C |
| Ramp Rates | −55 °C → +125 °C in 7 s |
| Temperature Stability | ±0.1 °C |
| Airflow Control | 2.2–8.4 L/s |
| Operating Modes | Manual / Automatic / Programmable |
| User Interface | Touchscreen HMI |
| Program Storage | Up to 45 thermal profiles, each with up to 20 steps |
| Standards Compliance | JEDEC JESD22-A104, MIL-STD-883 Method 1010, MIL-STD-750 Method 1037 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Model | TC-400-12 |
| Temperature Range | −70 °C to +150 °C |
| Temperature Uniformity | ±2.0 °C |
| Ramp Rates | 5–25 °C/min (linear or non-linear profile) |
| Optional LN₂-Assisted Cooling | up to 30 °C/min |
| Internal Dimensions (W×H×D) | 800 × 950 × 800 mm |
| Compliance | GB/T 5170.2–2008, IEC 60068-3-5, MIL-STD-810H (thermal shock) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | PDL-800 |
| Temperature Range | −40 °C to +150 °C |
| Refrigeration Method | Compressor-based Cooling |
| Explosion-Proof Design | Standard (Non-Explosion-Proof) |
| Temperature Uniformity | ±2 °C |
| Temperature Fluctuation | ±0.5 °C |
| Heating Rate | ≤60 min (from −40 °C to +150 °C) |
| Internal Dimensions (W×H×D) | 1000 × 1000 × 800 mm |
| Humidity Control Range | 5 %RH to 98 %RH |
| Minimum Achievable Humidity | 5 %RH at 10 °C and 40 °C |
| Dehumidification Method | Rotating Drum Regenerative Desiccant System |
| Humidification Method | Compact Steam Generator |
| Integrated Network Interface | Ethernet (Modbus TCP / HTTP API supported) |
| Compliance | Designed per IEC 60068-2 series, ISO 16750-4, MIL-STD-810H (environmental conditioning sections) |
| Brand | LabCompanion |
|---|---|
| Model | CS101-E |
| Type | Forced-Air Circulating Drying Oven |
| Temperature Range | R.T.+10°C to 300°C |
| Temperature Uniformity | ±2.5% |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate (to 300°C) | ≤70 min |
| Control System | Microprocessor-based PID Controller with Self-Tuning |
| Temperature Sensor | Industrial Platinum RTD (PT100) |
| Interior Material | SUS304 Mirror-Finish Stainless Steel (BN variant) or Pre-treated Cold-Rolled Steel (EN variant) |
| Insulation | High-Density Ultra-Fine Glass Fiber |
| Viewing Window | Double-Layer Heat-Resistant Tempered Glass |
| Safety Features | Independent Over-Temperature Protection, Over-Current Circuit Breaker |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 1.5 kW (CS101-1EBN), 2.5 kW (CS101-2EBN), 3.0 kW (CS101-3EBC) |
| Internal Volume | 72 L / 137.5 L / 234 L |
| Compliance | JB/T 5520–1991 Technical Specification for Drying Ovens |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | UV1 |
| Pricing | Upon Request |
| Temperature Range | RT+10°C to 70°C |
| Humidity Range | ≥90% RH |
| Sample-to-Lamp Distance | 50 ± 2 mm |
| Lamp Center-to-Center Spacing | 70 mm |
| Irradiance | UVA-340 @ 0.68 W/m² (295–360 nm), UVB-313 @ 0.60 W/m² (280–315 nm) |
| Internal Chamber Dimensions | 1170 × 450 × 500 mm (W×D×H) |
| External Dimensions | 1300 × 550 × 1380 mm (W×D×H) |
| Light Source | Fluorescent UV Lamps (UVA-340 or UVB-313 selectable) |
| Exposure Mechanism | Condensation Cycle (Humid Hot Air + Backside Cooling) |
| Compliance Standards | GB/T 16422.3–1997, ASTM G53–88, GB/T 14522–93 |
| Safety Protections | Overcurrent, Ground Fault, Overtemperature, Low-Water, Compressor Overpressure, Auto Power Cut-off with Audible Alert |
Show next