Optical Instruments
Filter
Showing 3001–3030 of 7843 results
| Brand | HanDing (HT) |
|---|---|
| Mounting Aperture | 50 mm |
| Design | Kinematic, Three-Axis Adjustable, Open-Frame Configuration |
| Material | Anodized Aluminum Alloy (6061-T6) |
| Angular Adjustment Range | ±4° per Axis (Pitch/Yaw/Roll) |
| Repeatability | ≤5 arcsec |
| Load Capacity | ≤300 g |
| Compatibility | Standard Ø50 mm optics (up to 6 mm thickness) |
| Surface Finish | Black anodized, non-reflective matte coating |
| Brand | Han Ding (HT) |
|---|---|
| Mounting Aperture | 50 mm & 50.8 mm (2") |
| Compatibility | Standard Ø1" and Ø2" Optics |
| Construction | Aluminum Alloy (Anodized Black) |
| Adjustability | Dual-Axis Tip/Tilt with Micrometer-Driven Kinematic Kinematics |
| Repeatability | ≤ ±2 arcsec |
| Load Capacity | ≤ 500 g |
| Thread Standard | M6 (Metric) and 1/4"-20 (Imperial) Base Mounting Holes |
| Surface Finish | Black Anodized for Low Scatter and Corrosion Resistance |
| Brand | Han Ding (HT) |
|---|---|
| Model | HTMM50-C |
| Mounting Aperture | 50 mm |
| Actuation Type | Closed-Loop Piezoelectric Positioning |
| Degrees of Freedom | Tip/Tilt (2-Axis) |
| Max. Load Capacity | 300 g |
| Repeatability | < 50 nm (typ.) |
| Resolution (closed-loop) | < 10 nm |
| Material | Anodized Aluminum 6061-T6 with Stainless Steel Adjustment Components |
| Thermal Drift | < 0.5 µrad/°C (over 20–30 °C) |
| Compatibility | Standard Ø1" (25.4 mm) to Ø2" (50.8 mm) optics, optimized for 50 mm clear aperture mirrors |
| Interface | M4 and M6 threaded mounting holes (bottom), SM2 (2.032") internal thread on top plate for direct optic retention |
| Brand | Han Ding (HT) |
|---|---|
| Origin | Jiangsu, China |
| Model | HTMM50-CS |
| Material | 304 Stainless Steel |
| Mounting Aperture | 50 mm |
| Adjustment Range (Pitch/Yaw) | ±2.5° |
| Resolution (Fine Adjustment) | <10 arcsec per division |
| Load Capacity | ≤1.5 kg |
| Surface Finish | Electropolished |
| Compatibility | Standard SM1 (1.035"-40) threaded optics carriers |
| Mounting Base | M6 threaded holes (grid pitch 25 mm) |
| Brand | HT (Handing) |
|---|---|
| Model | HTMM50-O |
| Mounting Aperture | 50 mm |
| Adjustment Axes | Tip/Tilt (X-Y angular) |
| Construction | Anodized Aluminum Alloy |
| Kinematic Design | Three-Point Contact with Locking Knobs |
| Angular Range | ±4° per axis (typical) |
| Repeatability | < 5 arcsec |
| Load Capacity | ≤ 300 g |
| Compatibility | Standard Ø50 mm optics (1" diameter), thickness 3–12 mm |
| Surface Finish | Hard-anodized, non-reflective black |
| Brand | Han Ding (HT) |
|---|---|
| Origin | Jiangsu, China |
| Model | HTMM50-OS |
| Material | 304 Stainless Steel |
| Mounting Aperture | 50 mm |
| Adjustment Range | ±2° (Pitch & Yaw) |
| Resolution | <15 arcsec per division |
| Repeatability | ±10 arcsec |
| Load Capacity | ≤1.2 kg |
| Thread Standard | M6 (base), SM1 (mirror retention) |
| Compliance | ISO 9001-certified manufacturing process |
| Regulatory Context | Designed for integration into ISO/IEC 17025-compliant optical test benches |
| Brand | Han Ding (HT) |
|---|---|
| Model | HTMR13-NS |
| Travel Range | 13 mm |
| Drive Type | Right-side micrometer head |
| Guide Mechanism | Precision linear ball bearing rail |
| Actuation Options | Compatible with fine-pitch screw, differential micrometer, or standard micrometer head |
| Positioning Repeatability | ≤ ±1 µm (typical, under controlled lab conditions) |
| Platform Mounting Pattern | Standard 25 mm grid of M4 threaded holes |
| Construction | Anodized aluminum alloy body with hardened stainless steel components |
| Load Capacity | 5 kg (horizontal, static) |
| Backlash Compensation | Integrated spring-preloaded mechanism |
| Brand | Han Ding / HT |
|---|---|
| Origin | Jiangsu, China |
| Model | HTMR25-NS |
| Travel Range | 25 mm |
| Drive Type | Right-side micrometer head |
| Guide Mechanism | Precision linear ball bearing rail |
| Preload & Backlash Compensation | Spring-loaded anti-backlash mechanism |
| Mounting Pattern | Standard ISO/Metric tapped hole array (e.g., M4 or 1/4"-20) |
| Drive Compatibility | Fine-pitch lead screw, standard micrometer head, differential micrometer head |
| Product Category | Manual Translation Stage |
| Brand | HanDing (HT) |
|---|---|
| Origin | Jiangsu, China |
| Model | HTRH75R |
| Mounting Type | Magnetic Base Optical Post Holder |
| Rod Length | 75 mm |
| Rotation Range | 360° Continuous Around Rod Axis |
| Bearing Type | Precision Ball Bearing |
| Locking Mechanism | Dual-lock (Rod Clamp + Rotation Lock) |
| Compliance | ISO 9001–Certified Manufacturing Process |
| Material | Anodized Aluminum Alloy (6061-T6) |
| Weight | ~180 g |
| Max Load Capacity | 2.5 kg (Static, Centered Load) |
| Brand | HT (Handing) |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | HTSB-B |
| Pricing | Upon Request |
| Brand | HT (Handing) |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HTSB-C |
| Pricing | Available Upon Request |
| Brand | HT (Handing) |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HTSB-D |
| Pricing | Available Upon Request |
| Brand | Han Ding (HT) |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HTSB-E |
| Pricing | Available Upon Request |
| Brand | HT (Handing) |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | HTSB-F |
| Pricing | Available Upon Request |
| Brand | HT (Handing) |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HTSB-G |
| Pricing | Available Upon Request |
| Brand | Han Ding / HT |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HTSL25-X |
| Product Category | Manual Translation Stage |
| Drive Side | Left |
| Travel Range | 25 mm |
| Actuation | Precision Micrometer Head |
| Guidance | Linear Ball Bearing Rails |
| Repeatability | ≤ ±1 µm (typical for class-compliant manual stages) |
| Mounting Pattern | Standard M4/M6 Tapped Holes on Top and Base Plates |
| Preload Mechanism | Dual-Spring Anti-Backlash Design |
| Brand | HT (Handing) |
|---|---|
| Model | HTSM-13 |
| Travel Range | 13 mm |
| Minimum Graduation | 0.01 mm |
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | PRC |
| Pricing | Available Upon Request |
| Brand | HT (Handing) |
|---|---|
| Model | HTSM-25 |
| Travel Range | 25 mm |
| Minimum Graduation | 10 µm |
| Origin | Jiangsu, China |
| Distribution Type | Authorized Distributor |
| Compliance | ISO 9001–certified manufacturing process |
| Mounting Interface | Standard M4/M6 tapped holes (compatible with Thorlabs, Newport, and OptoSigma optical breadboards) |
| Brand | Han Ding (HT) |
|---|---|
| Origin | Jiangsu, China |
| Model | HTTS05-2A |
| Type | Manual Translation Stage |
| Axis Configuration | Dual-Axis (X-Y tilt) |
| Drive Mechanism | Precision Fine-Pitch Screw with Micrometer Head |
| Return Mechanism | Tension Spring Reset |
| Mounting Standard | ISO/Metric Thread Pattern (M4/M6 Grid) |
| Compliance | Designed for Laboratory Optical Alignment per ISO 10110-7 and ANSI/OEOSC OP1.002 |
| Brand | HanDing (HT) |
|---|---|
| Model | HTVH-01 |
| Adjustment Range | 70–85 mm |
| Mounting Base | Magnetic |
| Central Bore Diameter | 12.5 mm |
| Compatibility | HTR-series posts |
| Origin | Jiangsu, China |
| Distributor Type | Authorized Domestic Distributor |
| Compliance | Designed for ISO/IEC 17025-aligned optical laboratories |
| Brand | Han Ding (HT) |
|---|---|
| Origin | Jiangsu, China |
| Model | HTVH-02 |
| Adjustment Range | 90–120 mm |
| Mounting Hole Diameter | 12.5 mm |
| Base Type | Integrated Permanent Magnet Base |
| Compatibility | Designed for HTR-series posts |
| Locking Mechanism | Dual-lock (post clamp + height lock) |
| Material | Anodized aluminum alloy |
| Surface Finish | Black anodized, corrosion-resistant |
| Brand | HUANKONG |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | OEM Producer |
| Country of Origin | China |
| Model | PF-3000 |
| Price | Upon Request |
| Spectral Band | Mid-Wave Infrared (MWIR, 3–5 µm) |
| Detector Type | Cooled Type-II Superlattice (T2SL) Single-Element IR Detector |
| Application | Continuous Monitoring & Leak Survey |
| Measurement Method | Non-Contact Passive Imaging |
| Cooling Mechanism | Integrated Stirling Cryocooler |
| Frame Rate | 50 Hz |
| Temperature Accuracy | ±1% of reading |
| Thermal Sensitivity (NETD) | ≤10 mK |
| Temperature Range | −20 °C to +350 °C |
| IR Spatial Resolution | 1280 × 720 pixels |
| Spectral Tuning | Optimized for VOC absorption bands (e.g., CH₄, C₂H₆, C₃H₈, VOCs with C–H stretch fundamentals) |
| Brand | Hubner |
|---|---|
| Origin | Germany |
| Model | C-WAVE |
| Type | Continuous-wave Optical Parametric Oscillator (OPO)-based Tunable Laser Source |
| Spectral Range | 450–650 nm (visible, via SHG of idler/signal) + 900–1300 nm (NIR, intracavity signal/idler) |
| Linewidth | <100 kHz (C-WAVE advanced) |
| Tuning Mechanism | Motorized cavity length & nonlinear crystal angle control |
| Interface | GUI (Windows/Linux) and SCPI-compliant USB/Ethernet programming interface |
| Compliance | CE, RoHS, IEC 60825-1 Class 4 Laser Product |
| Brand | HunterLab |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Model | Aeros Accessory Kit |
| Product Type | Colorimeter |
| Instrument Type | Benchtop |
| Optical Geometry | 0/45° Integrating Sphere |
| Light Source | LED Cold Light Source |
| Spectral Range | 400–700 nm |
| Repeatability | ΔE*ab ≤ 0.03 |
| Brand | HunterLab |
|---|---|
| Origin | USA |
| Model | Aeros Biscuit Colorimeter |
| Instrument Type | Benchtop |
| Optical Geometry | 0/45° Integrating Sphere |
| Light Source | Full-Spectrum LED (Cool White) |
| Spectral Range | 400–700 nm |
| Repeatability | ΔE*ab ≤ 0.03 (mean, CIE Lab, standard conditions) |
| Measurement Area | Up to 223.2 cm² (34.6 in²) |
| Sample Handling | Non-contact, Auto-height Detection, Motorized Rotating Sample Tray (35 measurements per rotation, 5 s/rotation) |
| Display | Full-color capacitive touchscreen interface |
| Software | EasyMatch ESSENTIAL (standalone operation supported) |
| Compliance | Designed for GLP/GMP environments |
| compliant with ISO 11664-4 (CIE colorimetry), ASTM E308, and CIE 15 | 2018 |
| Brand | HunterLab |
|---|---|
| Origin | USA |
| Model | Aeros Chip Colorimeter |
| Product Type | Color Difference Meter |
| Instrument Type | Benchtop |
| Optical Geometry | 0/45° Integrating Sphere |
| Light Source | Full-Spectrum LED (Cool White) |
| Spectral Range | 400–700 nm |
| Repeatability | ΔE*ab ≤ 0.03 (mean, CIE Lab, 10 measurements on uniform tile) |
| Brand | HunterLab |
|---|---|
| Origin | USA |
| Model | Aeros Food Colorimeter |
| Instrument Type | Benchtop |
| Optical Geometry | 0/45° Integrating Sphere |
| Light Source | Full-Spectrum LED (Cool White) |
| Spectral Range | 400–700 nm |
| Repeatability | ≤0.03 ΔE* (CIE Lab, mean of 35 measurements) |
| Measurement Area | Up to 223.2 cm² (34.6 in²) |
| Interface | Capacitive Touchscreen Display |
| Software | EasyMatch ESSENTIAL (Standalone & PC-Connectable) |
| Connectivity | Ethernet, USB, Wi-Fi, Email Export, LIMS/SPC Integration, Remote Diagnostic Support (HunterLab Connect) |
| Brand | HunterLab |
|---|---|
| Origin | USA |
| Model | Aeros |
| Product Type | Spectrophotometric Colorimeter |
| Instrument Type | In-Line / Benchtop Hybrid |
| Optical Geometry | 0/45° Integrating Sphere |
| Light Source | Full-Spectrum LED (Cool White) |
| Spectral Range | 400–700 nm |
| Repeatability | ΔE*ab ≤ 0.03 (mean, CIE Lab, standard illuminant D65, 10° observer) |
| Measurement Area | Up to 223.2 cm² (34.6 in²) per full rotation |
| Rotation Speed | 35 measurements in 5 seconds |
| Height Adjustment | Motorized Auto-Positioning via Precision Ultrasonic Sensor |
| Interface | 7″ Full-Color Capacitive Touchscreen |
| Software | EasyMatch ESSENTIAL (embedded & PC-compatible) |
| Compliance | Supports FDA 21 CFR Part 11 audit trail (with optional user management), GLP/GMP data integrity protocols, ASTM E308, ISO/CIE 11664-4, ISO 13655 |
| Brand | HunterLab |
|---|---|
| Origin | USA |
| Model | Aeros Non-Contact Spectrophotometer |
| Instrument Type | Benchtop |
| Optical Geometry | 0/45° Integrating Sphere |
| Light Source | Full-Spectrum LED (Cold White) |
| Spectral Range | 400–700 nm |
| Repeatability | ΔE*ab ≤ 0.03 (mean, CIE Lab, standard tile) |
| Brand | HunterLab |
|---|---|
| Origin | USA |
| Model | Aeros |
| Instrument Type | Benchtop |
| Light Source | Full-Spectrum LED Array |
| Spectral Range | 400 nm – 700 nm |
| Repeatability | ∆E* < 0.025 CIE L*a*b* (max, 30 measurements on white tile) |
| Measurement Area | 177.25 cm² (φ15 cm) |
| Sample Height Range | 65 mm – 140 mm |
| Rotation Speed | 12 rpm |
| Measurement Time per Revolution | 5 s |
| Spectral Resolution | < 3 nm |
| Effective Bandwidth | 10 nm |
| Photometric Range | 0–150 % |
| Inter-Instrument Agreement | ∆E* < 0.30 CIE L*a*b* (avg, CCSII tile) |
| Data Storage Capacity | 500,000 measurements |
| Display | 7″ HD Touchscreen (1280 × 800) |
| Power Supply | 100–240 VAC, 47–63 Hz / 24 VDC (90 W) |
| Dimensions (L×W×H) | 38 × 51 × 56 cm |
| Weight | 23 kg |