Optical Instruments
Filter
Showing 2941–2970 of 7843 results
| Brand | HORIBA |
|---|---|
| Origin | France |
| Model | Smart SE |
| Spectral Range | 450–1000 nm |
| Detector | CCD |
| Spot Visualization | Patented real-time surface imaging |
| Spot Selection | Motorized multi-size micro-spot (e.g., 30 µm, 100 µm, 300 µm) |
| Sample Stage | Motorized XYZ stage (200 mm × 200 mm travel, Z-axis range >35 mm) |
| Modulation | Liquid Crystal Variable Retarder (LCVR), no moving parts in optical path |
| Measurement Mode | Variable-angle spectroscopic ellipsometry |
| Output | Full-spectrum Ψ(λ) and Δ(λ) in <1 s per angle |
| Configuration | Supports both offline lab-based and inline process-integrated deployment |
| Brand | HORIBA |
|---|---|
| Origin | France |
| Model | Smart SE |
| Measurement Speed | 5 s (typical), down to 1 s (max) |
| Wavelength Range | 450–1000 nm |
| Spot Sizes | 7 selectable configurations (e.g., 75 µm × 150 µm to 500 µm × 500 µm) |
| Software | DeltaPsi² v5.x (Windows-based) |
| Compliance | Designed for GLP/GMP-aligned workflows |
| Brand | HORIBA |
|---|---|
| Origin | USA |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | Symphony CCD |
| Price | Upon Request |
| Brand | HORIBA |
|---|---|
| Origin | USA |
| Model | Synapse CCD |
| Cooling | Thermoelectric (TE), down to −75 °C |
| Sensor Architecture | Front-Illuminated (FI) or Back-Illuminated (BI), with UV/Visible/NIR-optimized variants |
| Pixel Array Options | 1024×256, 2048×512, 512×512 |
| Readout Interface | USB 2.0 |
| Auxiliary Analog Input | Voltage or current channel for PMT/Si/InGaAs reference detection |
| Trigger Support | Programmable TTL edge-triggered input/output |
| Integrated Shutter Driver | Yes |
| Vacuum-Sealed Sensor Chamber | Yes |
| Linearity Certification | Per-unit factory-tested across full dynamic range |
| Software Compatibility | SynerJY® control suite, SDK, LabVIEW® VIs |
| Compliance | Designed for GLP/GMP-aligned spectral laboratories |
| Brand | HORIBA |
|---|---|
| Origin | USA |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | Synapse Plus High-Speed CCD |
| Pricing | Upon Request |
| Brand | HORIBA |
|---|---|
| Origin | France |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported Instrument |
| Model | UVISEL |
| Pricing | Available Upon Request |
| Brand | Huironghe |
|---|---|
| Origin | Beijing, China |
| Model | HRH-200A |
| Type | Fully Automated Microscopic Image Analysis System for Cytogenetic Toxicology |
| Slide Capacity | ≥200 slides (batch loading), ≥8 slides on stage simultaneously |
| Objective Lenses | 10×, 20×, 100× (oil-immersion auto-dipping) |
| Analysis Modes | Real-time concurrent scanning & analysis |
| Cell Types Supported | Binucleated cells, mononucleated cells, polychromatic erythrocytes (PCE) |
| Output Metrics | Micronucleus frequency (%), micronucleated cell frequency (%), aberration classification (dicentrics, rings, fragments), audit-trail-enabled report export |
| Origin | Imported |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model | HSR-3000 |
| Pricing | Available Upon Request |
| Brand | HT |
|---|---|
| Model | HTLB90-02 |
| Origin | Jilin, China |
| Mounting Configuration | Orthogonal Dual-Surface Rigid Block |
| Surface Perpendicularity | Precision-Machined to ≤ 15 arcsec Deviation |
| Mounting Hole Pattern | Standard M4 and 1/4"-20 Tapped Holes on Both Faces |
| Material | Anodized 6061-T6 Aluminum Alloy |
| Weight | ~185 g |
| Compatibility | Integrates with Standard 30 mm and 50 mm Cage Systems, Linear Stages, and Kinematic Mounts |
| Brand | HT |
|---|---|
| Model | HTML13-NS |
| Travel Range | 13 mm |
| Drive Type | Left-Side Mounted Micrometer Head |
| Guide Mechanism | Precision Linear Ball Bearing Rails |
| Mounting Pattern | Standard ISO/Metric Tapped Holes (e.g., M4 or M6, center-to-center spacing per industry convention) |
| Repeatability | ≤ ±1.5 µm (typical for calibrated micrometer-driven stages) |
| Load Capacity | ≤ 5 kg (horizontal, static) |
| Construction | Anodized Aluminum Alloy Base and Platform |
| Compliance | Designed to meet mechanical stability requirements for optical alignment in ISO 10110-compliant labs |
| Brand | HT |
|---|---|
| Travel Range | 25 mm |
| Drive Type | Left-Side Micrometer Head |
| Guide Mechanism | Precision Linear Ball Bearing Rails |
| Repeatability | ≤ ±1 µm (typ.) |
| Platform Mounting Pattern | Standard M6/M4 Grid (25 mm Pitch) |
| Construction | Anodized Aluminum Alloy Body with Stainless Steel Lead Screw |
| Compliance | ISO 9001 Manufacturing Process |
| Origin | Jiangsu, China |
| Product Category | Manual Optical Translation Stage |
| Brand | HT |
|---|---|
| Model | HTPM25 |
| Type | Precision Optical Prism Mount |
| Adjustment Axes | 2× Angular (Pitch/Yaw), 1× Linear (Vertical Height) |
| Drive Mechanism | 1/4"-100 Fine-Pitch Stainless Steel Micrometer Screws |
| Return Mechanism | Dual Pre-Loaded Tension Springs |
| Construction | Anodized Aluminum Alloy (6061-T6) |
| Compatibility | Prisms up to 25 mm aperture (customizable base plate interface) |
| Compliance | Designed for ISO 10110 optical mounting standards and GLP-aligned lab environments |
| Brand | HT (Handing) |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HTPZ-F |
| Pricing | Available Upon Request |
| Brand | HT |
|---|---|
| Model | HTRH100R |
| Rod Length | 100 mm |
| Mounting Base | Magnetic |
| Rotation Range | 360° about Rod Axis |
| Bearing Type | Precision Ball Bearing |
| Construction | Aluminum Alloy with Black Anodized Finish |
| Locking Mechanism | Dual Independent Knob Locks (Rod & Rotation Stage) |
| Compliance | Designed for ISO/IEC 17025-aligned optical alignment workflows |
| Brand | HT |
|---|---|
| Model | HTRH50R |
| Rod Length | 50 mm |
| Origin | Jiangsu, China |
| Distribution Type | Authorized Distributor |
| Compliance | Designed for ISO/IEC 17025-aligned optical alignment workflows |
| Brand | Han Ding (HT) |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | PRC |
| Model | HTAC-PS-03 |
| Weight | 0.04 kg |
| Bore Diameter | 12.5 mm |
| Orthogonal Mounting Holes | Two, mutually perpendicular |
| Brand | Han Ding (HT) |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Manufacture | China |
| Model | HTAC-PS-04 |
| Bore Diameter | 12.5 mm |
| Rotation | ±180° continuous (360° relative between two mounting holes) |
| Mass | 0.01 kg |
| Material | Anodized aluminum alloy (6061-T6) |
| Surface Finish | Black anodized, non-reflective |
| Mounting Thread | M6 × 0.75 (standard for optical posts and breadboards) |
| Compatibility | Accepts Ø12.5 mm optical posts, rods, and kinematic pins |
| Key | Brand: HT (Handing) |
|---|---|
| Model | HTAC-RC-01 |
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (PRC) |
| Pricing | Available Upon Request |
| Brand | HT / Han Ding |
|---|---|
| Origin | Jiangsu, China |
| Model | HTAS100-13-N |
| Thread Specification | 1/4"-100 UNC (Pitch: 0.254 mm) |
| Material | Stainless Steel Shaft with Hardened Brass Nut |
| Locking Mechanism | Integrated Locking Collar |
| Compatibility | Standard Newport-compatible Mounting Interface (M4 & 8-32 Tapped Holes) |
| Optional | Knurled Metal Handwheel |
| Drive Tip | Ball-Tipped Sliding Contact Design |
| Brand | Han Ding / HT |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HTAS80-13-N |
| Pitch | 0.318 mm (equivalent to 1/4"-80 UNC) |
| Thread Standard | Imperial Fine Thread (1/4"-80 UNC) |
| Nut Material | Bronze |
| Drive Mechanism | Ball-Tipped Sliding Contact |
| Compatibility | Newport-compatible mounting interface (standard optical mount footprint) |
| Optional Feature | Knurled Metal Knob (detachable) |
| Brand | HanDing / HT |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HTCL25-X |
| Product Category | Manual Translation Stage |
| Travel Range | 25 mm |
| Drive Mechanism | Precision Differential Micrometer (Center-Mounted) |
| Guidance System | Linear Ball Bearing Rails |
| Backlash Compensation | Spring-Loaded Preload |
| Mounting Pattern | Standard ISO/Metric Tapped Holes on Top and Base Plates |
| Compliance | Designed for ISO/IEC 17025-aligned optical alignment workflows |
| Brand | Han Ding / HT |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HTDL100-X |
| Travel Range | 100 mm |
| Drive Mechanism | Precision Ground Lead Screw |
| Guide Type | Dual Dove-Tail Rails |
| Mounting Pattern | Standard ISO/Metric Tapped Holes (M4/M6) on Top and Base Plates |
| Orientation Flexibility | Compatible with Right-Angle Brackets for Vertical or Multi-Axis Assembly |
| Product Category | Manual Optical Translation Stage |
| Compliance | Designed for Laboratory-Grade Optical Alignment in Accordance with ISO 10110-7 (Optical Component Mounting Tolerances) and Compatible with Common Optical Table Grid Standards (e.g., M6 × 25 mm Pitch) |
| Brand | Han Ding (HT) |
|---|---|
| Model | HTDL50-X |
| Travel | 50 mm |
| Rail Type | Dual Dove-Tail |
| Drive Mechanism | Precision Ground Lead Screw (Pitch: 0.254 mm) |
| Top Plate Dimensions | 100 × 62 mm |
| Central Load Capacity | 6 kg |
| Product Category | Manual Translation Stage |
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Brand | HT (Handing) |
|---|---|
| Model | HTDM-13 |
| Total Travel | 13 mm |
| Fine Adjustment Range | 0.2 mm |
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Compliance | ISO 9001–certified supply chain |
| Mounting Interface | Standard M6 and SM1 (1.035"-40) compatible |
| Brand | Han Ding / HT |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (China) |
| Model | HTFM-U |
| Pricing | Upon Request |
| Brand | HT (Handing) |
|---|---|
| Model | HTFPS301R |
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Pricing | Available Upon Request |
| Brand | Han Ding / HT |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (China) |
| Model | HTFPS501 |
| Pricing | Available Upon Request |
| Brand | HT (Handing) |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HTFPS501R |
| Pricing | Upon Request |
| Brand | HT |
|---|---|
| Origin | Jiangsu, China |
| Model | HTFPS601R |
| Material | Stainless Steel (Thermally Stable Grade) |
| Mounting Interface | Integrated Dovetail Base |
| Handedness | Right-Handed |
| Structural Configuration | Compact Monolithic Design with Cross-Roller Bearings and Precision Ground V-Grooves |
| Compliance | Designed for ISO/IEC 17025-aligned optical alignment workflows |
| Target Use Case | Active/passive fiber coupling, free-space-to-fiber interfacing, interferometric setup stabilization, and ultra-stable photonic packaging |
| Brand | HanDing / HT |
|---|---|
| Origin | Jiangsu, China |
| Model | HTIMS301 |
| Travel (X/Y/Z) | 13 mm |
| Drive Mechanism | Differential Micrometer Head |
| Sensitivity | 0.002 mm |
| Guide Type | Precision Linear Ball Bearing Rail with Ground Steel Rods |
| Material & Finish | Anodized Aluminum (Crimson Red) |
| Max Load | 3.5 kg |
| Weight | 0.9 kg |
| Handedness | Right-Handed (HTIMS301R) |
| Product Category | Manual Translation Stage |
| Compliance | Designed for ISO/IEC 17025-aligned optical alignment workflows in R&D and metrology labs |