Other Industry Specialized Instruments
Filter
Showing 691–720 of 894 results
| Brand | Solar Light |
|---|---|
| Origin | USA |
| Model | PMA2144 |
| Classification | ISO 9060:2018 Class II |
| Detection Principle | Thermopile-based |
| Spectral Range | 310–2800 nm (FWHM) |
| Measurement Range | 0–2000 W/m² (0–200 mW/cm²) |
| Response Time (95%) | 18 s |
| Annual Drift | <1% per year |
| Nonlinearity | <2.5% at 1000 W/m² |
| Thermal Offset | <15 W/m² at 200 W/m² thermal irradiance |
| Cosine Response Error | ≤2% up to 70° zenith angle |
| Operating Temperature | −40 to +80 °C |
| Cable Length | 9 m |
| Shaded Diameter | 60.3 mm |
| Unshaded Diameter | 78.11 mm |
| Height | 84.0 mm |
| Weight | 0.31 kg |
| Calibration | NIST-traceable |
| Brand | Solar Light |
|---|---|
| Origin | USA |
| Model | Poly602® |
| Compliance | ISO 23698:2024, ISO 24442, BS EN 62471:2008, ACGIH UV Exposure Guidelines |
| Spectral Range | 320–400 nm |
| Operating Temperature | 15–35 °C |
| Relative Humidity | <90% RH (non-condensing) |
| Power Supply | 110–240 VAC, 50/60 Hz, max 7 A |
| Interface | USB |
| Dimensions (H×W×L) | 26.2 × 40.6 × 40.6 cm |
| Clear Rear Clearance Required | 8 cm |
| Weight | 15.4 kg |
| Fiber Optic Probe | Bifurcated bundle with integrated contact probe, 1.8 m length |
| Measurement Time per Sample | ~3–4 s |
| Throughput | 10 subjects × 8 products = ~8 hours |
| UV Exposure Level | Below occupational exposure limits (ACGIH/IEC 62471) |
| Brand | Solar Light |
|---|---|
| Origin | USA |
| Model | SPF-290AS |
| Wavelength Range | 290–400 nm |
| Spectral Bandwidth (FWHM) | 1.66 nm |
| Wavelength Accuracy | ±0.2% (±0.58–0.80 nm) |
| Wavelength Repeatability | ±0.25 nm |
| Absorbance Range | 0–3.2 A (Dual-Doped PMMA Method) |
| SPF Measurement Range | 1–50+ |
| Scan Time | <25 s |
| Wavelength Step Intervals | 1, 2, or 5 nm (user-selectable) |
| Light Source | 125 W Continuous Xenon Lamp |
| Detector | High-Sensitivity Photomultiplier Tube (PMT) |
| Sample Positioning | Motorized X-Y Stage (Auto-sequencing for up to 12 measurement points) |
| Software | WinSPF v4.1 with FDA 21 CFR Part 11–compliant audit trail, GLP/GMP-ready reporting, and ISO 24443 support |
| Compliance | ASTM E2674, ISO 24443 (pending final publication), COLIPA 2011, EU Cosmetics Regulation (EC No. 1223/2009), AATCC-183, AS/NZS 4399, FDA Monograph 21 CFR §352, Boots Star Rating, Critical Wavelength (λc), UVA-PF/SPF Ratio, TNUV Calculation |
| Calibration Traceability | NIST-traceable reference filters included in Test Kit |
| Brand | Solar Light |
|---|---|
| Origin | USA |
| Model | SPF-290AS |
| Wavelength Range | 290–400 nm |
| Spectral Bandwidth (FWHM) | 1.66 nm |
| Wavelength Accuracy | ±0.2% (±0.58–0.80 nm) |
| Wavelength Repeatability | ±0.25 nm |
| Absorbance Range | 0–3.2 A (Dual-Doped PMMA Method) |
| SPF Measurement Range | 1–50+ |
| Scan Time | <25 s |
| Wavelength Step Intervals | 1, 2, or 5 nm (user-selectable) |
| Light Source | Continuous-output Xenon Arc Lamp |
| Detector | High-Sensitivity Photomultiplier Tube (PMT) |
| Sample Positioning | Motorized X-Y Stage |
| Power Supply | 110 V AC / 60 Hz or 220 V AC / 50 Hz |
| Warranty | 1 year (instrument), 500 h (lamp |
| typical lamp life | ~1000 h) |
| Brand | Solar Light |
|---|---|
| Origin | USA |
| Model | 601-300 v2.5 |
| Output Channels | 6 independent 8 mm × 8 mm square ports |
| Spectral Range | 290–400 nm (UVA + UVB) |
| Max Irradiance | 4 MED/min |
| Uniformity | <±5% |
| Stability (after 15 min warm-up) | <±2% |
| Lamp | 300 W short-arc xenon |
| Cooling | Forced-air |
| Weight | 5 kg |
| Power Supply | 90–250 VAC, 4 A |
| Brand | Seaward |
|---|---|
| Origin | United Kingdom |
| Model | Solar Utility Pro |
| Voltage Range | Up to 1500 V DC |
| Current Range | Up to 40 A DC |
| Automation Level | Fully Automatic |
| Compliance | IEC 62446-1, IEC 61587, EN 61000-6-3 |
| Data Storage | Internal memory for up to 999 CSV-formatted test records |
| Interface | Integrated display with real-time IV curve preview |
| Accessories Included | 1.5 m MC4-to-alligator-clip conversion lead, rugged carry case, USB-C data export port |
| Brand | SolarLight |
|---|---|
| Origin | USA |
| Model | Solar Light 601-300 |
| Wavelength Range | 290–400 nm (UVA and UVA+B selectable) |
| Output Channels | 6 independent 8 mm × 8 mm square apertures |
| Control | Individual channel intensity and exposure timing |
| Compliance | Designed to meet ISO 24444:2019 and ISO 24442:2019 requirements for in vivo SPF and UVA-PF testing |
| Brand | Solinst |
|---|---|
| Origin | Canada |
| Manufacturer Status | Authorized Distributor |
| Origin Category | Imported |
| Model | 415 |
| Price | Upon Request |
| Brand | SOLY |
|---|---|
| Origin | Japan |
| Model | SK-1100 |
| Type | Planetary Vacuum Mixing System |
| Drive Principle | Dual-axis planetary motion (container rotation + revolution) |
| Maximum Load Capacity | 1100 mL (standard configuration) |
| Mixing Speed Range | 0–2500 rpm (adjustable, stepless) |
| Vacuum Capability | Optional integrated vacuum pump (≤10 Pa) |
| Construction | Stainless steel 316L contact parts |
| Compliance | CE-marked, ISO 9001 certified manufacturing |
| Brand | SOLY |
|---|---|
| Origin | Japan |
| Model | SK-2000 |
| Type | Planetary Vacuum Mixer |
| Drive Principle | Dual-axis planetary motion (container rotation + revolution) |
| Maximum Batch Volume | 2000 mL |
| Vacuum Capability | Optional integrated vacuum system (≤10 Pa typical) |
| Speed Range | 0–2500 rpm (revolution), 0–4500 rpm (rotation), independently adjustable |
| Torque Output | Up to 120 N·m (revolution), 85 N·m (rotation) |
| Control Interface | Touchscreen HMI with programmable multi-step protocols |
| Compliance | CE-marked, conforms to IEC 61000-6-2/6-4 EMC standards |
| Brand | SOLY |
|---|---|
| Origin | Japan |
| Model | SK-3000T |
| Type | Planetary Dual-Axis Mixing and Deaeration System |
| Drive Mechanism | Dual synchronous motor-driven planetary motion (container rotation + revolution) |
| Vacuum Capability | Integrated vacuum chamber (≤10 Pa typical) |
| Mixing Time Range | 10 s – 5 min (programmable) |
| Maximum Viscosity Handling | Up to 1,000,000 mPa·s (non-Newtonian shear-thinning fluids) |
| Container Capacity | 0.5–3 L (standard configuration) |
| Compliance | CE-marked, conforms to IEC 61000-6-2/6-4 EMC standards |
| Brand | SOLY |
|---|---|
| Origin | Japan |
| Model | SK-350T |
| Drive Principle | Planetary Dual-Axis Rotation (Container Orbiting + Spinning) |
| Vacuum Capability | Integrated Vacuum Chamber (Optional or Standard per Configuration) |
| Mixing Time Range | 10–180 seconds |
| Maximum Viscosity Handling | Up to 1,000,000 mPa·s (dependent on container size and material density) |
| Container Capacity | 0.5–350 mL (standard with interchangeable chuck fixtures) |
| Speed Control | Digital PID-regulated motor with independent orbital and rotational speed adjustment (Orbit: 0–250 rpm |
| Spin | 0–800 rpm) |
| Construction | Stainless steel frame, anodized aluminum drive head, vacuum-rated polycarbonate chamber (optional borosilicate glass viewport) |
| Brand | SOLY |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Vacuum-Integrated Configuration |
| Pricing | Available Upon Request |
| Brand | SOPTOP |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer | SOPTOP Optics Co., Ltd. |
| Type | Domestic Industrial Vision Inspection System |
| Model | MINIRZJ-300 |
| Power Supply | AC 220 V |
| Total Power Consumption | 5000 W |
| Compressed Air Requirement | 0.5 MPa |
| Overall Dimensions (L×W×H) | 2000 × 1300 × 2100 mm |
| Weight | 1600 kg |
| X/Y/Z Transport Axis Repeatability | ±0.02 mm |
| Sorting Y/Z Axis Repeatability | ±0.02 mm / ±0.03 mm |
| Feeding & Detection Z/X Axis Repeatability | ±0.03 mm / ±0.02 mm |
| Field of View | 21 mm × 21 mm |
| Miss Detection Rate | <1% (typical) |
| Overkill Rate | <10% (typical) |
| UPH | ≥7000 (for ≤8×8 mm components, 10×10 tray, ≥80% pass rate) / ≥4000 (for ≥12×12 mm components, 7×7 tray, ≥80% pass rate) |
| Defect Localization Accuracy | ±2.1 µm (point), ±0.1° (angle) |
| Compatible Carrier Sizes | 115×115 mm, 115×135 mm, 101.5×101.5 mm |
| Supported Component Types | Square, round-threaded, screen-printed, dual-camera IR cut filter assemblies |
| Minimum Component Footprint | 4.5×4.5 mm |
| Detection Principle | Grayscale-based optical contrast analysis using high-resolution CCD imaging |
| Brand | Zealquest AI Netherlands |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (PRC) |
| Model | SpecBotics-30 |
| Pricing | Available Upon Request |
| Brand | -- |
|---|---|
| Origin | Japan |
| Manufacturer Type | General Distributor |
| Origin Category | Imported |
| Model | IPCE |
| Quotation | Upon Request |
| Measurement Mode | AC |
| Brand | Spectro Scientific |
|---|---|
| Origin | USA |
| Model | InfraCal 2 ATR-SP |
| Detection Limit (Water) | 0.3 ppm |
| Detection Limit (Soil) | 3 ppm |
| Wavelength | 3.4 μm (2930 cm⁻¹) |
| Power | 18 V DC, 3.3 A |
| Weight | 2.6 kg (net), 3.2 kg (with Li-ion battery) |
| Dimensions | 17 cm × 19.8 cm × 13.2 cm |
| Operating Temperature | 5–40 °C |
| Analysis Time | 10–15 min (including extraction) |
| Repeatability | ±0.2 ppm |
| Communication Interface | USB |
| Compliance | EPA Method 1664, EPA Method 1164, ISO 9377-2 |
| Solvents | Hexane, Pentane, Cyclohexane, Vertrel MCA |
| Brand | CK |
|---|---|
| Origin | USA |
| Distributor Type | Authorized Distributor |
| Origin Category | Imported |
| Model | SPF-290AS |
| Pricing | Upon Request |
| Brand | CK |
|---|---|
| Origin | Germany |
| Manufacturer Status | Authorized Distributor |
| Origin Category | Imported |
| Model | SPF-InVivoSpec DRS 320 |
| Trigger Mode | Steady-State |
| Light Source | Tunable LED-based UV Hybrid Spectrum (290–400 nm) |
| Measurement Principle | Diffuse Reflectance Spectroscopy with Photon Banana Path Modeling |
| Origin | Imported |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model | SPF290S |
| Measurement Principle | UV-Vis Spectrophotometry with Integrated Diffuse Transmittance Analysis |
| Compliance | AS/NZS 2604:2012 (Australian TNUV), Boots Star Rating Algorithm v2.0, ISO 24443:2021 (in vitro method) |
| Scan Speed | Full spectral acquisition (290–400 nm) in ≤20 s per sample site |
| Data Output | SPF, MPF (Mean Protection Factor), UVA-PF, UVB-PF, UVA/UVB Ratio, Boots Star (1–5 stars), Absorbance spectra (nm), Transmittance profiles (%) |
| Reporting | ASTM E2718-compliant PDF reports with spectral curves, statistical summaries (n = 1–36 replicates), and batch-level formulation comparison matrices |
| Software | Windows-based SPFCalc v4.2 with 21 CFR Part 11 audit trail, user role management, and GLP-compliant data archiving |
| Brand | Wenoes |
|---|---|
| Origin | France |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Instrument |
| Model | SPREADMASTER |
| Pricing | Available Upon Request |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | SPIN150i |
| Pricing | Available Upon Request |
| Brand | AMETEK MOCON |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Standard Bureau of Mines (Model 13 / Chanscope II) |
| Pricing | Available Upon Request |
| Brand | Starwood |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | Domestic (China) |
| Model | PROTE |
| Pricing | Upon Request |
| Brand | Sunny Optical (SOPTOP) |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | MINLMJ-100 |
| Pricing | Available Upon Request |
| Dimensions (L×W×H) | 2100 × 1510 × 2100 mm |
| Weight | 2000 kg |
| Power Supply | AC 220 V |
| Power Consumption | 6500 W |
| Pneumatic Supply Pressure | 0.5 MPa |
| Z-axis Repeatability (Loading/Unloading) | ±0.05 mm |
| Z-axis Repeatability (Inspection Transfer) | ±0.02 mm |
| Y-axis Repeatability (Inspection Transfer) | ±0.01 mm |
| X-axis Repeatability (Imaging Module) | ±0.01 mm |
| Z-axis Repeatability (Imaging Module) | ±0.02 mm |
| X/Y-axis Repeatability (Buffer Stage) | ±0.01 mm |
| Y/Z-axis Repeatability (Sorting Transfer) | ±0.01 mm / ±0.02 mm |
| X/Z-axis Repeatability (Sorting Actuator) | ±0.01 mm / ±0.02 mm |
| Compatible Tray Sizes | 76 × 76 mm and 101.6 × 101.6 mm |
| Detectable Component Footprint | ≥4.5 × 4.5 mm |
| Field of View | 15 mm × 20 mm |
| Glass Surface Defect Miss Rate | <500 ppm |
| Orientation Detection Miss Rate | <100 ppm |
| Glass Surface False Call Rate | <5% |
| Orientation False Call Rate | <1% |
| Throughput (UPH) | ≥15,000 (CSP yield = 90%), ≥13,500 (CSP yield = 85%) |
| Applicable Packages | CSP and COM image sensor modules |
| Brand | Suruga Seiki |
|---|---|
| Origin | Japan |
| Model | BSS16-70CZ |
| Platform Surface | 70 × 70 mm |
| Travel Range | ±6.5 mm (13 mm total) |
| Load Capacity | 219.5 N (22.4 kgf) |
| Feed Mechanism | Standard Micrometer Head (Pitch = 0.5 mm) |
| Minimum Micrometer Resolution | 10 µm/div |
| Positioning Accuracy | Straightness ≤1 µm, Pitch ≤25″, Yaw ≤15″, Roll Parallelism ≤12 µm |
| Permissible Moment Loads | Pitch/Yaw/Roll = 12.9 / 13.8 / 12.9 N·m |
| Torque Rigidity | Pitch/Yaw/Roll = 0.09 / 0.1 / 0.09 ″/N·cm |
| Permissible Parallelism Tolerance | ≤30 µm |
| Perpendicularity Tolerance | ≤10 µm |
| Mass | 1.16 kg |
| Guide Type | Linear Ball Bearing Rail |
| Construction Material | Stainless Steel with Electroless Nickel Plating |
| Brand | Suying |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer (not distributor) |
| Country of Manufacture | China |
| Model | WH-100 |
| Temperature Range – Heating Chamber | 45–160 °C |
| Temperature Range – Cooling Chamber | −28–100 °C |
| Compliance | ISO 6452, DIN 75201, SAE J1756, GB/T 27630 |
| Brand | Suying |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer (not distributor) |
| Country of Manufacture | China |
| Model | WH-100 |
| Temperature Range – Heating Chamber | 45–160 °C |
| Temperature Range – Cooling Chamber | −28–100 °C |
| Compliance | ISO 6452, DIN 75201, SAE J1756, GB/T 27630 |
| Brand | Suying |
|---|---|
| Origin | Shanghai, China |
| Model | WH-100 |
| Fogging Test Temperature Range | 45–160 °C |
| Cooling Bath Temperature Range | −28 to 100 °C |
| Compliance | ISO 6452, DIN 75201, SAE J1756, QB/T 2729 |
| Key | Origin: Sweden |
|---|---|
| Type | Import |
| Core Diameter Options | 4.35 mm (0.169″) or 5.15 mm (0.200″) or 12 mm (0.500″) |
| Length Options | 100–800 mm (4″–32″) |
| Standard Configuration | Triple-threaded auger, 5.15 mm diameter |
| Material | High-grade Swedish steel with PTFE coating |
| Compliance | Designed for ISO 7741-1 (Wood — Determination of increment core sampling procedures) |