Particle/Powder Analysis Instruments
Filter
Showing 451–480 of 969 results
| Brand | MingShen Science |
|---|---|
| Origin | Henan, China |
| Model | KER-86 |
| Material | 304 Stainless Steel |
| Compliance | GB/T 474 |
| Sample Throughput Capacity | ≤13 mm (Large), ≤6 mm (Medium), ≤3 mm (Small), ≤1.25 mm (Extra-Small) |
| Groove Width | 39 mm / 18 mm / 9 mm / 5 mm |
| Groove Count | ≥8 per side |
| Groove Inclination Angle | ≥60° from horizontal |
| Minimum Opening Size | ≥5 mm |
| Sealing Integrity | Tight-fitting receiver assembly to prevent fines and moisture loss |
| Brand | MingShen Science |
|---|---|
| Origin | Henan, China |
| Model | SFQ Series |
| Material Options | Galvanized Steel or Stainless Steel |
| Compliance | Designed per GB/T 474–2008 (revised edition of GB 474–1996) |
| Slot Count | 16–32 slots (per side, ≥8 per side) |
| Slot Width | 5–32.5 mm (2.5–3× nominal top particle size, min. 5 mm) |
| Minimum Chute Inclination | ≥60° |
| Particle Size Handling Range | <0.5 mm to <13 mm |
| Sample Retention Mass | 1–7.5 kg depending on top size |
| Construction | Non-pressurized, gravity-fed, manual operation |
| Brand | MingShen Science |
|---|---|
| Origin | Henan, China |
| Model | SZH-200 |
| Principle | Mechanical tap-action sieving |
| Sieve Diameter Compatibility | 200 / 150 / 100 / 75 mm |
| Max. Stack Height | 7 sieve layers |
| Oscillation Frequency | 290 ±10 cycles/min |
| Tap Frequency | 156 ±10 impacts/min |
| Stroke Length | 25 mm |
| Tap Height | 38 ±6 mm |
| Power | 370 W |
| Voltage | 220 V AC |
| Dimensions (H×L×W) | 500×400×700 mm |
| Weight | 100 kg |
| Particle Size Range | 100 mm down to 80 mesh (≈177 µm) |
| Brand | MingShen Science |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | YTSZH-4 |
| Principle | Mechanical Vibration Sieving |
| Sieve Aperture Range | 80 mesh to 100 mm |
| Maximum Load Capacity | 10 kg |
| Number of Sieve Stages | 10 |
| Sieve Diameter | 200 mm |
| Stack Height | 400 mm |
| Orbital Radius | 12.5 mm |
| Oscillation Frequency | 221 cycles/min |
| Tap Frequency | 147 taps/min |
| Vertical Stroke Amplitude | 6 mm |
| Timer Range | 0–60 min |
| Power Supply | Three-phase AC 380 V, 50 Hz |
| Motor Power | 370 W |
| Motor Speed | 2800 rpm |
| Net Weight | 100 kg |
| Dimensions (L×W×H) | 520 × 370 × 870 mm |
| Brand | NEXOPART |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | NEXOPART e200 LS Air Jet Sieve Analyzer (Formerly Alpine) |
| Price Range | USD 26,000 – 65,000 |
| Brand | NEXOPART |
|---|---|
| Origin | Germany |
| Model | EML 200 Premium |
| Measurement Range | 20 µm – 125 mm |
| Max. Sample Load | 3 kg |
| Max. Sieve Stack Weight | 8.7 kg |
| Sieve Diameter Range | 50 mm – 203 mm |
| Max. Number of Sieves | 15 (at 32 mm effective height) |
| Dry Sieving | Yes |
| Wet Sieving | Yes |
| Amplitude Adjustment | Auto-adjustable up to 3 mm |
| Timing Range | 0–99 min or continuous |
| Programmable Methods | 49 stored protocols |
| Display | Large LCD touchscreen |
| Interface | Ethernet |
| Compliance | ISO 9001 calibration support |
| Software | CSA 5.0 Basic license included |
| Power Supply | 110–230 V, 50–60 Hz |
| Dimensions (W×D×H) | 385 × 295 × 875 mm |
| Net Weight | 37 kg |
| Color | RAL 9003 (Signal White) |
| Brand | NEXOPART |
|---|---|
| Origin | Germany |
| Model | EML 200 Premium Remote Sieve Analyzer |
| Measurement Range | 20 µm – 125 mm |
| Max. Sample Weight | 3 kg |
| Max. Sieve Stack Weight | 8.7 kg |
| Sieve Diameter Range | 50 mm – 203 mm |
| Max. Number of Sieves | 9 (50 mm effective height) or 15 (32 mm effective height) |
| Amplitude Adjustment | Auto-adjusting, up to 3 mm |
| Timing Range | 0–99 min or continuous |
| Operating Modes | Interval or timed run (interval adjustable 0–99 s) |
| Program Storage | 49 user-defined methods |
| Wet Sieving | Yes |
| Dry Sieving | Yes |
| Power Supply | 110–230 V, 50–60 Hz |
| Interface | Ethernet port + dedicated remote control unit |
| Display | Large backlit LCD |
| Compliance | ISO 9001 calibration-ready |
| Software | CSA 5.0 Basic license included |
| Damping System | Enhanced low-noise design |
| Optional Accessory | “Twinnut” quick-release clamping system |
| Brand | NEXOPART |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | EML200 Series |
| Price Range | USD 28,000 – 70,000 |
| Brand | NEXOPART |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | HAVER RPT |
| Price Range | USD 13,500 – 40,500 |
| Brand | NIUMAG |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PA001-Particle |
| Pricing | Upon Request |
| Brand | NIUMAG |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PQ001 |
| Pricing | Available Upon Request |
| Brand | NIUMAG |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PQ001 |
| Pricing | Available Upon Request |
| Brand | NIUMAG |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | PQ001-PQ |
| Measurement Time | 1–3 minutes |
| Brand | NIUMAG |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | PQ001 |
| Pricing | Upon Request |
| Brand | NIUMAG |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PQ001 |
| Pricing | Available Upon Request |
| Brand | NIUMAG |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PQ001-Powder |
| Pricing | Available Upon Request |
| Brand | NIUMAG |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic Instrument |
| Model | PQ001-kl |
| Instrument Type | Particle Characterization Analyzer |
| Measurable Powder Parameters | Dispersion Index (DI), Stability Index (SI), Relative Surface Affinity |
| Maximum Sample Cell Capacity | 2 mL |
| Measurement Principle | Dynamic Light Scattering (DLS) coupled with Time-Resolved Turbidity Analysis (TRTA) |
| Software Platform | NIUMAG DispersionSuite v3.2 (GLP-compliant audit trail, user-level access control, data export in CSV/PDF/XLSX) |
| Brand | NIUMAG |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Region of Manufacture | Domestic (China) |
| Model | PQ001-NMR |
| Measurement Scope | In-situ wettability analysis of particle suspensions in native liquid media |
| Brand | Occhio |
|---|---|
| Origin | Belgium |
| Model | 500nano HR |
| Measurement Principle | Static image analysis with high-resolution CMOS imaging and collimated blue backlighting |
| Measurement Mode | Dry dispersion (integrated vacuum dispersion system) and reflective mode |
| Particle Size Range (dry) | 0.4–2000 µm |
| Pixel Resolution | 0.38–4.7 µm/pixel |
| Camera | 6.6 MP or 10 MP progressive-scan industrial CMOS |
| Optical System | Zoom telecentric lens |
| Light Source | 440 nm collimated blue LED |
| Field of View | 836 × 1140 µm @ 0.38 µm/pixel to 10266 × 1400 µm @ 4.7 µm/pixel |
| Software | Callisto 2D |
| Compliance Options | IQ/OQ/PQ validation support |
| Dimensions (W×D×H) | 540 × 540 × 720 mm (standard) |
| Weight | 38.5 kg / 43.5 kg |
| Brand | Occhio |
|---|---|
| Origin | Belgium |
| Model | SIEVECAL |
| Application | Automated optical calibration and metrological analysis of test sieves per ASTM E11, ISO 3310-1, and DIN EN ISO 3310-1 |
| Imaging Resolution | 1.2 µm (pixel-limited) |
| Sieve Diameter Support | 200–300 mm (8–12 inch) |
| Aperture Size Range | 20 µm – 12.5 mm |
| Measurement Parameters | Feret X/Y diameters, maximum inscribed circle diameter, wire thickness (X/Y), aperture area, blockage ratio, statistical distribution (mean, min, max, σ) |
| Compliance Standards | ASTM E11-13, ISO 3310-1:2016, DIN EN ISO 3310-1 |
| Analysis Time | ≤120 s per sieve |
| Optical System | Collimated 450 nm blue LED backlight + telecentric zoom lens + USB3 monochrome camera (1.3 MP) |
| Automation Level | Fully motorized XY translation + 360° continuous rotation stage |
| Software | Occhio SIEVECAL Suite with audit-trail-capable reporting, GLP-compliant data storage, and CFR 21 Part 11–ready configuration options |
| Brand | Endecotts |
|---|---|
| Origin | United Kingdom |
| Model | OCTAGON DIGITAL 2000 |
| Base Height | 210 mm |
| Diameter | 410 mm |
| Sieve Diameter | 200 mm (8 in) |
| Sieve Capacity | 8 full-height or 16 half-height sieves |
| Compliance | EC Machinery Directive, BS 410:2019 compliant test sieve manufacturer |
| Brand | Octopus |
|---|---|
| Origin | Germany |
| Model | SAMILLA FIM LO |
| Application Field | Pharmaceutical |
| Instrument Type | Dynamic |
| Measurement Range | 200 nm – 2 mm |
| Camera Options | 12 MP monochrome or color camera |
| Sample Dispersion Method | Wet dispersion |
| Image Resolution | 12 MP |
| Measured Parameters | Full particle size and shape metrics (e.g., area, perimeter, circularity, aspect ratio, convexity, solidity, Feret diameters, intensity, texture) |
| Module Architecture | HiRes-FIM (High-Resolution Flow Imaging Microscopy), Light Obscuration (LO), Pump (MACRO/MICRO1/MICRO2/HYBRID), Auto-Clean |
| Brand | Octopus |
|---|---|
| Origin | Germany |
| Model | SAMILLA-FIM |
| Application Field | Pharmaceutical |
| Instrument Type | Dynamic |
| Measurement Range | 200 nm – 2 mm |
| Camera Options | 12 MP monochrome or color camera |
| Dispersion Method | Wet dispersion |
| Image Resolution | 12 MP |
| Measurement Parameters | Full particle size and shape characterization (equivalent spherical diameter, aspect ratio, circularity, convexity, solidity, elongation, roundness, etc.) |
| Brand | OFITE |
|---|---|
| Origin | USA |
| Manufacturer Status | Authorized Distributor |
| Origin Category | Imported |
| Model | 365-10 |
| Dispersion Method | Wet Dispersion |
| Measurement Range | 0.34–500 µm |
| Data Storage | 128 MB Flash Memory (≥40,000 samples) |
| Battery Life | Up to 6 hours |
| Dimensions (H×D×W) | 17.7 × 29 × 44.3 cm |
| Weight | 7.5 kg |
| Ultrasonic Probe | 25 W, 40 kHz |
| Compliance | ISO 13320-1 |
| Brand | OMEC |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Manufacturer |
| Product Category | Domestic |
| Model | DP-02 |
| Dispersion Method | Wet Dispersion |
| Instrument Type | Laboratory Laser Particle Size Analyzer |
| Measurement Range | 1–1500 µm |
| Repeatability | <3% |
| Measurement Time | 1–2 minutes |
| Brand | OMEC |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Region Category | Domestic (China) |
| Model | LS-909 |
| Pricing | Upon Request |
| Dispersion Method | Dry & Wet Dispersion |
| Instrument Type | Laboratory Laser Particle Size Analyzer |
| Measurement Range | 0.02–3000 µm (wet), 0.1–3000 µm (dry) |
| Repeatability | <0.5% (D50 standard deviation) |
| Measurement Time | 1–2 minutes |
| Brand | OMEC |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Manufacturer |
| Product Category | Domestic Instrument |
| Model | LS-909 II |
| Dispersion Method | Dry & Wet Dispersion |
| Instrument Type | Laboratory Laser Particle Size Analyzer |
| Measurement Range | 0.02–3000 μm (wet method, sample-dependent) |
| Repeatability | ≤ 0.5% (D50 deviation of certified reference material) |
| Measurement Time | 1–2 minutes per sample (including system preparation and cleaning) |
| Brand | OMEC |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Manufacturer |
| Origin Category | Domestic |
| Model | LS-909E |
| Pricing | Upon Request |
| Dispersion Method | Dry Dispersion |
| Instrument Type | Laboratory Laser Particle Size Analyzer |
| Measurement Range | 0.1–3000 µm |
| Repeatability | <0.5% |
| Measurement Time | 1–2 min |
| Measurement Principle | Full-Range Mie Scattering Theory |
| Sample Introduction | Automated Dry Feeding |
| Optical Source | Imported He-Ne Laser (λ = 632.8 nm, Power >2.0 mW) |
| Detector Channels | 87 (Frontal, Sideward, Large-Angle, Multi-Backward) |
| ADC Resolution | 18-bit |
| Sampling Rate | 10 kHz |
| Alignment System | Intelligent Auto-Alignment (Precision: ±0.2 µm) |
| Environmental Operating Range | 5–35 °C, RH <85% |
| Power Requirements | 200–240 V AC, 50 Hz (Host: 60 W |
| Dispersion System | 2000 W) |
| Dimensions (L×W×H) | 1320 × 340 × 360 mm (Host) |
| Brand | OMEC |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Instrument Type | Laboratory Wet-Dispersion Laser Diffraction Particle Size Analyzer |
| Measurement Range | 0.1–750 µm |
| Repeatability | <1% (D50 deviation against certified reference material) |
| Measurement Time | 1–2 minutes |
| Dispersion Method | Wet Dispersion |
| Number of Independent Detection Channels | 49 |
| Light Source | He-Ne laser, 2.0 mW output power, wavelength 632.8 nm |
| Sampling Frequency | 1 kHz |
| Operating Environment | 5–35 °C, RH <85% |
| Dimensions (L×W×H) | 838 × 265 × 295 mm (main unit) |
| Brand | OMEC |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | NS-90 |
| Price | Upon Request |
| Particle Size Range | 0.3 – 5000 nm |
| Size Measurement Repeatability | ≤ ±1% (NIST-traceable latex standards) |
| Temperature Control Range | 0–90°C (optional 120°C thermostatic cell) |
| Temperature Stability | ±0.1°C |
| Correlator Sampling Time | 25 ns – 8000 s |
| Number of Autocorrelation Channels | >4000 |
| Primary Measurement Principle | Dynamic Light Scattering (DLS) at 90° scattering angle |
| Secondary Measurement Principle | Static Light Scattering (SLS) |
| Sample Volume Requirement | 0.3–5000 nm (size range) |
| Zeta Potential Measurement Capability | Not integrated (ALL = N/A in this model) |
| Typical Measurement Duration | ~10 seconds per run |
| Molecular Weight Range | <1000 Da – 2×10⁷ Da |