Petroleum Specialized Analytical Instruments
Filter
Showing 31–60 of 1348 results
| Brand | Anton Paar |
|---|---|
| Origin | Germany |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | TAG500 |
| Detection Method | Closed-Cup (Tagliabue) |
| Operation Mode | Fully Automatic |
| Temperature Range | −30 °C to +130 °C |
| Ignition Source | Electronic (Encapsulated Hot-Wire) |
| Compliant Standards | ASTM D56, ASTM D3941, ASTM D3934, ISO 1516, ISO 1523 |
| Brand | ECH |
|---|---|
| Origin | Germany |
| Model | Aquamax KF PRO LPG |
| Application | Coulometric Karl Fischer titration for trace moisture determination in pressurized liquefied gases (LPG, LNG) and vapor-phase hydrocarbon streams |
| Detection Range | 0.1–1000 µg H₂O (equivalent to 0.1–500 ppmv in gas phase, depending on sample volume and density) |
| Sample Form | Liquid or vapor-phase, pressurized |
| Automation Level | Fully automated sample introduction, titration, rinsing, and method execution |
| Compliance | Designed per ISO 8573-3, ASTM D6304, ASTM D7429, and EN 15472 |
| Brand | Arrow Grand Technologies |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | GC-IR2 |
| Pricing | Available Upon Request |
| Measurement Principle | Semiconductor Mid-IR Laser Absorption Spectroscopy Coupled with High-Resolution Capillary Gas Chromatography |
| Isotopes Measured | δ¹³C of CH₄ (C1), C₂H₆ (C2), C₃H₈ (C3), and n-C₄H₁₀ (C4) |
| Precision (δ¹³C) | <0.4 ‰ (30-day stability, no calibration gas) |
| Sample Throughput | One complete isotopic profile per 5 minutes |
| Detection Limits | CH₄ ≥ 0.5% v/v |
| CO₂ Concentration Accuracy | ±0.01% (full scale) |
| Total Carbon Compound Concentration Accuracy | ±0.01% |
| Spectral Acquisition Rate | 4 Hz |
| Dead Volume | <0.1 mL |
| Calibration Gas | CO₂ standard required for high-precision mode |
| Power Supply | 110/220 V AC, 1 kW average, 3 kW peak |
| Operating Temperature | 0–35 °C |
| Relative Humidity | 0–95% RH (non-condensing) |
| [Brand | AST |
|---|---|
| Origin | Shanghai, China |
| Model | DM8116 |
| Detection Target | Total Sulfur |
| Detection Limit (300 s) | 0.33 ppm |
| X-ray Tube | Ag anode, ≤50 kV / ≤2 mA / ≤50 W, micro-focus, thin Be window |
| Crystal | Logarithmic Spiral Doubly Curved Crystal (LSDCC) |
| Detector | Ultra-thin Be window proportional counter |
| Standards Compliance | GB/T 11140, ISO 20884, SH/T 0842, ASTM D2622, ASTM D7039, ASTM D7220 |
| Measurement Range | 3×LOD to 9.99 wt% |
| Analysis Time | 1–999 s (recommended: 300 s for trace, 60 s for major) |
| Operating Environment | 5–40 °C, ≤85% RH at 30 °C, 220 V ±20 V, 50 Hz, ≤200 W |
| Dimensions & Weight | 330 × 460 × 350 mm, 25 kg] |
| Brand | ASTEL/ST |
|---|---|
| Origin | Shanghai, China |
| Model | DM1260 |
| Detection Method | Total Sulfur Quantification |
| Detection Limit (300 s) | 3.9 ppm |
| Compliance | GB/T 17040–2019, GB 17411, ASTM D4294 |
| X-ray Tube | ≤20 kV, ≤1 mA, ≤10 W |
| Detector | Ultra-thin Be-window Proportional Counter |
| Measurement Range | 3×LOD to 9.99 wt% S |
| Analysis Time | 1–999 s (recommended: 100 s for major, 300 s for trace) |
| Operating Environment | 5–40 °C, ≤85% RH at 30 °C, 220 V ±20 V, 50 Hz, ≤100 W |
| Dimensions & Weight | 300 × 410 × 165 mm, 10 kg |
| Brand | ASTEL / ST |
|---|---|
| Origin | Shanghai, China |
| Model | DM2400S/Cl |
| Detection Elements | Total Sulfur (S), Total Chlorine (Cl) |
| Detection Limits (300 s) | S: 0.26 ppm, Cl: 0.18 ppm |
| X-ray Tube | Ag-target, micro-focus, thin Be window, ≤50 kV / ≤2 mA / ≤50 W |
| Detector | Silicon Drift Detector (SDD), 20 mm² active area, ≤123 eV resolution at Mn Kα, ≤2 Mcps count rate |
| Primary Optic | Logarithmic Spiral Doubly Curved Crystal (LSDCC) artificial monochromator |
| Standards Compliance | GB/T 11140, ISO 20884, ASTM D2622, ASTM D7039, ASTM D7220, ASTM D4929, ASTM D7536, ISO 15597 |
| Measurement Range | 3×LOD to 9.99 wt% |
| Linear Correlation Coefficient (r) | >0.999 for both S and Cl calibration curves |
| Repeatability (r) & Reproducibility (R) | Meets or exceeds all referenced ASTM/ISO/GB standards |
| Operating Environment | 5–40 °C, ≤85% RH (at 30 °C), 220 V ±20 V, 50 Hz, <200 W |
| Dimensions & Weight | 330 × 460 × 350 mm, 25 kg |
| Origin | Switzerland |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | D127 |
| Pricing | Upon Request |
| Compliance | ASTM D127, IP 133, CE Marked |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 700 Series, ASTM D323, D4953, D5482, D5191 |
| Measurement Range | 0–35 psi (0–250 kPa) |
| Cycle Time | ≤5 min |
| Repeatability | ±0.05 psi (±3.5 mbar) |
| Temperature Control | 37.8 °C ±0.1 °C |
| Pressure Resolution | ±0.01 psi |
| Pressure Accuracy | ±0.01% of full scale |
| Sample Flow Rate | 0.04–0.1 L/min |
| Sample Pressure | 20–35 psi (1.4–2.4 bar), optional up to 120 psi (8.3 bar) |
| Sample Particle Size | ≤10 µm |
| Enclosure Rating | NEMA 4X / IP65 |
| Hazardous Area Certification | NEC Class 1 Div 1 Group C+D / ATEX Zone 1 II 2G IIB+H2 T4 |
| Origin | Switzerland |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | ASTM D566 |
| Pricing | Upon Request |
| Origin | Switzerland |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 256000/M, ASTM D6 |
| Power Supply | 220 V / 50 Hz, 2000 W |
| Temperature Range | Ambient to 180 °C ± 1 °C |
| Temperature Control Accuracy | ±0.1 °C (PID + Pt100 RTD) |
| Rotational Speed | 5.5 rpm (adjustable 5–6 rpm) |
| Internal Chamber Dimensions | 60 × 80 × 80 cm (W × H × D) |
| Net Weight | ~30 kg |
| Safety Certification | CE |
| Compliance Standards | ASTM D6, ASTM D1754, IP 145 |
| Origin | Imported |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model | AD0972-100 |
| Pricing | Available Upon Request |
| Origin | USA |
|---|---|
| Type | Imported |
| Model | 780 |
| Compliance | ASTM D323, D4953, D5482, D5181, D5188 |
| RVP Range | 0–35 psi (0–250 kPa) |
| VL20 Temperature Range | 25–65 °C |
| Cycle Time | ≤5 min per mode |
| Repeatability | ±0.05 psi (±3.5 mbar) for RVP |
| Operating Environment | NEMA 4X / IP65 |
| Sample Flow Rate | 0.04–0.1 L/min |
| Sample Particle Size | ≤10 µm |
| Purge Gas | Dry nitrogen ≥98% purity, 40–100 psi |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | MYL-D1076 |
| Pricing | Available Upon Request |
| Brand | ASTRO / ST |
|---|---|
| Origin | Shanghai, China |
| Model | DM1262 |
| Detection Method | Total Sulfur (S) by Energy-Dispersive X-ray Fluorescence (EDXRF) |
| Detection Limit (300 s, air atmosphere) | 2.6 ppm |
| Weight (incl. battery & thermal printer) | 5.6 kg |
| Measurement Range | 3×DL to 9.99 wt% S |
| Linearity Coefficient (r) | >0.999 across low/mid/high calibration ranges |
| Repeatability (r) & Reproducibility (R) | Compliant with GB/T 17040–2019, GB 17411, and ASTM D4294 |
| Operating Temperature | −10 °C to +40 °C |
| Relative Humidity | ≤95% at 35 °C |
| Power Supply | 11.1 V / 20.8 Ah Li-ion battery (≥5 h continuous operation) |
| Dimensions | 242 mm (W) × 258 mm (D) × 142 mm (H) |
| X-ray Tube | ≤10 kV, ≤1 mA, ≤10 W |
| Detector | Low-background ultra-thin Be-window proportional counter with secondary filtration |
| Pulse Processing | FPGA- and DSP-based digital multi-channel analyzer (MCA) with reduced dead time |
| Software | Embedded touchscreen OS with automatic C/H ratio correction, matrix effect compensation, and multi-range calibration curve switching |
| Regulatory Compliance | Meets radiation safety exemption criteria per CNPC and IAEA guidelines |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | PR-32α |
| Measurement Range | 0.0–32.0% Brix |
| Minimum Display Resolution | 0.1% Brix |
| Accuracy | ±0.1% Brix |
| Temperature Compensation | Automatic (5–40°C) |
| Operating Ambient Temperature | 5–40°C |
| Power Supply | 9V Alkaline Battery (006P) |
| IP Rating | IP64 |
| Application-Specific Scales | Customizable concentration scale via user-defined coefficient (Concentration = Brix × Coefficient) |
| Optical Interference Mitigation | External-Light-Interference (ELI) compensation technology |
| Instrument Type | Portable handheld refractometer |
| Compliance | Designed for industrial QC environments requiring repeatable, field-deployable liquid concentration verification |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | PR-32α |
| Type | Portable Digital Refractometer |
| Measurement Range | 0.0–32.0% Brix |
| Resolution | 0.1% Brix |
| Accuracy | ±0.1% Brix |
| Temperature Compensation | 5–40°C (Automatic) |
| Power Supply | 9V battery (006P) |
| IP Rating | IP64 |
| Dimensions | 17 × 9 × 4 cm |
| Weight | 300 g (body only) |
| Brand | Atten2 |
|---|---|
| Origin | Spain |
| Model | C100 |
| Product Type | Online Instrument |
| Detection Target | Mechanical Contaminants |
| Particle Recognition Capability | ≥4 µm |
| Compliance Support | ISO 4406, NAS 1638 |
| Compatible Fluids | Hydraulic oil, lubricating oil, fuel, mineral oil, synthetic oil, coolant, cleaning solution, cutting fluid |
| AI Engine | Trained on >500 commercial lubricant models and ferrographic particle morphology database |
| Data Output | Wired (Ethernet gateway) or Wireless (Wi-Fi/LoRaWAN) |
| Brand | Atten2 |
|---|---|
| Origin | Spain |
| Model | C120 |
| Type | Online Instrument |
| Detection Target | Mechanical Contaminants (Wear Debris) |
| Particle Detection Threshold | ≥4 µm |
| Compliance | ISO 4406, NAS 1638 |
| Fluid Compatibility | Hydraulic Oil, Lubricating Oil, Fuel Oil, Mineral & Synthetic Oils, Coolants, Cutting Fluids, Cleaning Solutions |
| Data Transmission | Wired Ethernet Gateway / Wireless (Wi-Fi/LoRaWAN) |
| AI Engine | Trained on >500 Commercial Lubricant Models & Lab-Validated Ferrographic Image Database |
| Brand | Atten2 |
|---|---|
| Origin | Spain |
| Model | EX S100 |
| Product Type | Online Instrument |
| Detection Parameter | Mechanical Contaminants |
| Compliance | ATEX/IECEx Certified for Hazardous Areas |
| Particle Detection Threshold | ≥4 µm |
| Output Standards | ISO 4406, NAS 1638 |
| Compatible Fluids | Hydraulic Oils, Lubricating Oils, Mineral & Synthetic Oils, Fuels, Coolants, Cutting Fluids, Aqueous Solutions |
| Brand | Atten2 |
|---|---|
| Origin | Spain |
| Model | EXC100 |
| Product Type | Online Instrument |
| Detection Parameter | Mechanical Contaminants |
| Compliance | ATEX/IECEx Certified for Hazardous Areas |
| Particle Detection Threshold | ≥4 µm |
| Output Standards | ISO 4406, NAS 1638 |
| Compatible Fluids | Hydraulic oil, lubricating oil, fuel, mineral & synthetic oils, coolants, cleaning fluids, cutting fluids |
| Data Interface | Wired Ethernet Gateway / Wireless (Wi-Fi/LoRaWAN) |
| AI Engine | Trained on >500 commercial lubricant models and ironographic particle morphology database |
| Brand | Atten2 |
|---|---|
| Origin | Spain |
| Model | EXS120 |
| Product Type | Online Instrument |
| Detection Target | Mechanical Contaminants (Particulate Wear Debris) |
| Particle Detection Threshold | ≥4 µm |
| Compliance | ATEX/IECEx Zone 1/21 Certified |
| Measurement Principle | AI-Enhanced Digital Image Analysis of In-Stream Oil Flow |
| Data Output | ISO 4406, NAS 1638, Wear Mode Classification (Fatigue, Cutting, Pitting, etc.) |
| Fluid Compatibility | Mineral Oils, Synthetic Lubricants, Hydraulic Fluids, Fuels, Coolants, Cleaning Solutions, and Aqueous Cutting Fluids |
| Brand | Atten2 |
|---|---|
| Origin | Spain |
| Model | OiHealth PROBE |
| Product Type | Online Instrument |
| Voltage | 24 V DC |
| Current Consumption | <200 mA |
| Digital Outputs | RS485 (Modbus RTU), Ethernet RJ45 (Modbus TCP/IP, FTP, Telnet) |
| Maximum Operating Pressure | 5 bar |
| Viscosity Range | 0–460 cSt |
| Operating Temperature | −20 °C to +80 °C |
| Ingress Protection | IP65 |
| Hydraulic Connection | 1/2″ BSP |
| Certifications | CE, GL Class pending |
| Detection Principle | Optical Absorption & Scattering Spectroscopy |
| Brand | Atten2 |
|---|---|
| Origin | Spain |
| Model | OilCMS |
| Product Type | Portable Instrument |
| Detection Parameters | Tribological Wear Analysis |
| Oil Compatibility | Synthetic, Mineral, Organic Oils & Diesel (up to 3000 cSt) |
| Standards Compliance | ISO 4406, SAE AS4059, NAS 1638 |
| Software | Rubolab Oil Condition Monitoring Suite |
| Operating Modes | Offline (Bottle Sampling) & Online (High-Pressure Flow Cell) |
| Data Export | CSV, PDF |
| Calibration | Auto-calibration via embedded oil database (500+ lubricants), field-updatable |
| Brand | Atten2 |
|---|---|
| Origin | Spain |
| Model | OilHealth |
| Type | Online Lubricant Oxidation Sensor |
| Compliance | CE, RoHS, ATEX Zone 2 (optional), IP67-rated housing |
| Communication | 4–20 mA analog output, Modbus RTU (RS-485), optional CAN bus or Ethernet/IP integration |
| Operating Temperature | −25 °C to +120 °C |
| Pressure Rating | Up to 10 bar (static) |
| Material | 316L stainless steel wetted parts, PEEK sensor body |
| Response Time | < 30 s (t₉₀) |
| Calibration | Factory-calibrated for mineral, PAO, and ester-based lubricants |
| Lifetime | ≥ 5 years in continuous operation (MTBF > 40,000 h) |
| Brand | Atten2 |
|---|---|
| Origin | Spain |
| Model | OilMoisture |
| Type | Online Instrument |
| Detection Target | Water Contamination in Lubricants |
| Measurement Principle | Near-Infrared (NIR) Absorption Spectroscopy |
| Compliance Context | Designed for ISO 4406, ASTM D6304, and ISO 11171-compliant condition monitoring systems |
| Brand | Atten2 |
|---|---|
| Origin | Spain |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | C100 |
| Pricing | Upon Request |
| Brand | Atten2 |
|---|---|
| Origin | Spain |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | S100 |
| Price Range | USD 7,000 – 14,000 (FOB) |
| Instrument Type | Online Monitoring Sensor |
| Detection Parameter | Mechanical Contaminants (Particulate Matter) |
| Particle Detection Threshold | ≥4 µm |
| Compliance Standards | ISO 4406:2017, NAS 1638 Class Code Calculation, ASTM D7647 (Image-Based Particle Analysis), GLP-Traceable Data Logging |
| Brand | Atten2 |
|---|---|
| Origin | Spain |
| Model | S100 |
| Particle Detection Threshold | ≥4 µm |
| Output Standards | ISO 4406, NAS 1638, SAE AS4059 |
| Classification Capability | Wear Debris Typing (Fatigue, Sliding, Cutting >20 µm) |
| Communication Interfaces | Analog (4–20 mA), Digital (RS-485, Modbus RTU), SCADA/PLC Compatible |
| Integration | Modular design for OEM integration into oil condition monitoring systems |
| Compliance | Designed for industrial fluid monitoring per ISO 11171 (calibration reference), ISO 4020 (hydraulic fluid sampling), and aligned with ASTM D6786 (particle counting in lubricants) |
| Brand | Atten2 |
|---|---|
| Origin | Spain |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | S120 |
| Product Type | Online Instrument |
| Detection Parameter | Mechanical Contaminants (Particulate Matter) |
| Particle Detection Threshold | ≥4 µm |
| Compliance | ISO 4406, NAS 1638 |
| Data Transmission | Wired Ethernet Gateway / Wireless (Wi-Fi/4G) |
| Fluid Compatibility | Hydraulic Oil, Lubricating Oil, Fuel Oil, Mineral Oil, Synthetic Oil, Coolants, Cleaning Solutions, Cutting Fluids |
| Brand | Atten2 |
|---|---|
| Origin | Spain |
| Product Type | Online Instrument |
| Detection Parameters | Mechanical Contaminants (Particulate Matter) |
| Particle Detection Threshold | ≥4 µm |
| Compliance | ISO 4406, NAS 1638 |
| Fluid Compatibility | Hydraulic Oil, Lubricating Oil, Mineral Oil, Synthetic Oil, Fuel Oil, Coolants, Cutting Fluids, Cleaning Solutions |
| Data Transmission | Wired Ethernet Gateway / Wireless (Wi-Fi/4G) |
| AI Engine | Trained on >500 Commercial Lubricant Models & Iron Spectroscopy Image Database |
| Software | Cloud-Enabled Diagnostic Platform with Audit Trail & GLP/GMP-Ready Reporting |