Physical Property Testing Instruments
Filter
Showing 7231–7260 of 12440 results
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic (China) |
| Model | NMC-II |
| Pricing | Available Upon Request |
| Motor | 60 W, 220 V, 50 Hz |
| Rotational Speed Range | 0–54 rpm |
| Abrading Head Load | 1000 g (standard) |
| Optional Weights | 250 g, 500 g |
| Dimensions (L×W×H) | 260 × 240 × 340 mm |
| Net Weight | 20 kg |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | No.214 |
| Quotation | Upon Request |
| Standards Compliance | ASTM D2863, ISO 4589-2, JIS K6269 & K7201 |
| Combustion Column ID | φ75±3 mm (standard), φ95 mm (optional) |
| Height | 450±5 mm |
| Gas Flow Control | Dual digital mass flow meters (O₂ & N₂) |
| Pressure Monitoring | O₂/N₂ supply pressure gauges + leak detection port |
| Ignition Source | Adjustable propane or pipeline gas burner (flame length 6–25 mm) |
| Sample Holder | U-shaped stainless steel fixture |
| Sample Types | Rigid/flexible plastics, elastomers, rubber compounds, textile fibers, and laminates |
| Power Supply | AC 100 V, 1-phase, 3 A, 50/60 Hz |
| Dimensions (W×D×H) | Approx. 600 × 290 × 660 mm |
| Weight | Approx. 30 kg |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model Numbers | 487, 497, 597 |
| Pricing | Available Upon Request |
| Torque Range | 2.83 N·m to 452,000 N·m (25 to 4,000,000 lb·in) |
| Accuracy | ±0.05% FS (Torque Analog Output) |
| Output | Engineering-Unit Digital via RS-232/RS-485 Serial Port |
| Signal Filtering | 11 Selectable Constant-Delay Low-Pass Filters |
| Overload Capacity | 200%, 400%, and 1,000% of Full Scale |
| Noise & Ripple | ≤0.02% FS |
| EMI Hardening | Optimized for Variable Frequency Drive (VFD) Environments |
| Calibration | Remote, Bidirectional, NIST-Traceable |
| Software | PC-Based Interface with Support for 33 Engineering Units (No Recalibration Required) |
| Key | Temperature Range: +100°C to +132°C (saturated steam temperature) |
|---|---|
| Humidity Range | 75–100% RH (saturated steam) |
| Pressure Control | 0–6 kgf/cm² (PID-controlled, computer-integrated) |
| Operating Pressure | 2.0 kgf/cm² (rated for ≥6 atm burst pressure) |
| Pressure Ramp Time | ≤45 min (0 → 2.0 kgf/cm²) |
| Temperature Control | PID microprocessor-based (VT-4810 controller), RT+10°C to 200°C, K-type thermocouple input, SSR solid-state relay output |
| Steam Circulation | Natural convection of saturated water vapor |
| Test Duration | 0.00–999.99 hr |
| Safety Interlocks | Dual-pressure/temperature sensing, vacuum-assisted air purge, auto-depressurization, auto-vacuum break, auto-refill (up to 1000 hr continuous operation) |
| Compliance | ASTM D2247, DIN 50017, ISO 6270-2, IEC 60068-2-30, NACE TM0177, UL 746C, JIS Z 2243, MIL-STD-810H Method 507.6 |
| Sample Access | Horizontal cylindrical chamber with radial door latch, self-sealing under internal pressure |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Pressure Range | 0–6 kgf/cm² (0–0.6 MPa) |
| Operating Pressure | 2.0 kgf/cm² (≈200 kPa gauge) |
| Temperature Range | +100°C to +132°C (saturated steam), Extended Range: RT+10°C to 200°C |
| Humidity Range | 75–100% RH (saturated steam environment) |
| Pressure Ramp Time | ≤45 min (0 → 2.0 kgf/cm²) |
| Test Duration | 0.00–999.99 hr |
| Safety Locking | Pressure-actuated mechanical door interlock |
| Vacuum Preconditioning | Integrated vacuum pump with HEPA-filtered air purge |
| Compliance | ASTM D3574, DIN 53504, ISO 188, IEC 60068-2-13, UL 746B, MIL-STD-810H, JIS K 6257, NACE TM0177 |
| Key | Temperature Range: +100°C to +132°C (saturated steam temperature) |
|---|---|
| Humidity Range | 75–100% RH (saturated steam) |
| Pressure Control | 0–6 kg/cm² via PID-based digital pressure controller |
| Operating Pressure | 2.0 kg/cm² (≥6 atm burst rating) |
| Pressure Ramp Time | ≤45 min (0 → 2.0 kg/cm²) |
| Temperature Control | PID microprocessor with PV/SV dual display, K-type thermocouple input, SSR solid-state relay output, RT+10°C to 200°C range |
| Steam Circulation | Natural convection of saturated steam |
| Timer Range | 0.00–999.99 hr |
| Chamber Geometry | Horizontal cylindrical inner chamber with vacuum-sealed door interlock |
| Safety System | Dual-locking pressure/temperature interlock, automatic depressurization, vacuum purge, and auto-refill (up to 1000 hr continuous operation) |
| Compliance | ASTM D2247, DIN 50017, ISO 6270-2, IEC 60068-2-30, UL 746C, MIL-STD-810H, JIS Z 2243, NACE TM0177, BS EN 60068-2-30 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 13,500 (FOB) |
| Temperature Range | +105°C to +132°C |
| Temp. Uniformity | ±1.5°C |
| Temp. Stability | ±0.5°C |
| Humidity Range | 75–100% RH (adjustable) |
| Humidity Uniformity | ±3.0% RH |
| Humidity Stability | ±1.5% RH |
| Pressure Range (gauge) | 0–2 kg/cm² (adjustable) |
| Max. Operating Pressure | 3.0 kg/cm² |
| Safety Pressure Capacity | 4.0 kg/cm² (1 atm + 3 kg/cm²) |
| Vacuum Preconditioning | Yes (with <1 µm particulate-filtered air intake) |
| Test Duration | 0–999 h |
| Pressurization Time | ~30 min (0 → 2 kg/cm²) |
| Heating Time (ambient to +132°C, no-load) | ~30 min |
| Internal Volume | Configurable |
| Power Supply | AC 220 V / 380 V, 50/60 Hz |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | –70 °C to +150 °C (Rapid Cycling Range: –45 °C to +85 °C) |
| Linear Ramp Rate | 3–15 °C/min |
| Nonlinear Ramp Rate | 3–20 °C/min |
| Humidity Range (Optional) | 5–98% RH |
| Temperature Resolution/Accuracy | 0.1 °C / ±0.5 °C |
| Humidity Resolution/Accuracy | 0.1% RH / ±2.5% RH |
| Temperature Uniformity | ±2.0 °C |
| Humidity Uniformity | ±3.0% RH |
| Interior Material | SUS304 Stainless Steel |
| Insulation | High-Density Polyurethane Foam with Ethyl Chloroformate Base |
| Cooling System | Air-Cooled or Water-Cooled |
| Refrigerant | R-404A & R-23 (DuPont Certified, Eco-Compliant) |
| Compressor | Tecumseh (France) |
| Key | Brand: OEM / Custom-Built |
|---|---|
| Origin | Imported (Global Sourcing) |
| Manufacturer Type | Authorized Distributor |
| Price | USD 2,650 (FOB) |
| Control System Options | TIME880 Color Touchscreen Controller (Korea), TIME300 Digital Film-Button Controller (Korea), OYO 8227 PID Touch Controller (Japan) |
| Sensor | PT100 Platinum Resistance Thermometer |
| Refrigeration | Hermetic Tecumseh or Semi-Hermetic Copeland Scroll Compressor |
| Heating | Independent Ni-Cr Alloy Sheathed Heater |
| Insulation | 80–100 mm High-Density Glass Fiber Blanket |
| Viewing Window | 300 × 400 mm Tempered Double-Glazed with Integrated Heating Element |
| Test Port | Ø50 mm Left-Side Penetration Port |
| Sealing | Dual-Layer High-Tensile Silicone Gasket (–70°C to +150°C Operational Range) |
| Compliance | Designed to Support ASTM D3418, IEC 60068-2-14, MIL-STD-810H Method 503.7 Protocols |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Capacity | 150 L / 408 L / 800 L |
| Internal Dimensions | 500×600×500 mm / 600×850×800 mm / 1000×1000×800 mm (W×H×D) |
| Temperature Range | −20 °C to +150 °C / −40 °C to +150 °C / −60 °C to +150 °C |
| Humidity Range | 20–98 %RH |
| Temp. Uniformity | ±0.5 °C |
| RH Uniformity | ±3 %RH |
| Temp. Stability | ±0.3 °C |
| RH Stability | ±2.5 %RH |
| Heating Rate | −40 °C to +100 °C in ≈45 min |
| Cooling Rate | +20 °C to −40 °C in ≈55 min |
| Refrigeration System | Dual-stage, hermetic imported compressors (air-cooled or water-cooled options) |
| Heating Method | Stainless steel finned heaters |
| Humidification | Surface evaporation with auxiliary humidifier, dry-run and overheat protection |
| Dehumidification | Refrigerant-based latent heat removal |
| Insulation | Rock wool + rigid polyurethane foam |
| Interior Material | SUS#304 stainless steel |
| Exterior Finish | Powder-coated steel or optional SUS#304 |
| Power Supply | AC 220 V / 380 V ±10 %, 1-phase or 3-phase, 50/60 Hz |
| Brand | Nordson Dage |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Quadra 7 |
| Price | USD 1000 (Base Configuration Reference Only) |
| Brand | Nordson Dage |
|---|---|
| Origin | United Kingdom |
| Model | XD7500VR Jade FP |
| X-ray Tube Type | Open Transmission Tube |
| Operating Voltage Range | 30–160 kV |
| Target Power | 3 W |
| Feature Resolution | 950 nm (0.95 µm) |
| Geometric Magnification | Up to 1400× |
| System Magnification | Up to 4200× |
| Maximum Sample Dimensions | 736 × 580 mm |
| Detector Resolution | 1.33 MP |
| Compliance | CE, RoHS, ISO 9001-certified manufacturing environment |
| Software Platform | DAGE VisionX™ v5.x with GLP-compliant audit trail and FDA 21 CFR Part 11-ready configuration options |
| Brand | Norman Tool |
|---|---|
| Origin | USA |
| Model | 7-IBB-CC |
| Load Options | 55 g, 175 g, 275 g |
| Rotational Speed | 16 rpm (50 Hz) / 18 rpm (60 Hz) |
| Counter Type | Digital LCD (0–999,999 cycles) |
| Sample Mounting | Flat & 3D fixtures included |
| Power Supply | 220 V, 50/60 Hz, 5 A |
| Weight | ~17 kg |
| Compliance | ASTM F2357-04, DIN-compatible abrasion evaluation |
| Brand | Norman Tool |
|---|---|
| Origin | USA |
| Model | 7-IBB-CC |
| Load Options | 55 g, 175 g, 275 g |
| Counter Type | Digital LCD (0–999,999 cycles) |
| Sample Mounting | Flat & 3D fixtures |
| Compliance | ASTM F2357-04 |
| Power Supply | 220 V, 50/60 Hz, 5 A |
| Weight | ~17 kg |
| Accessories | Calibration plate (certified), surface level gauge, hex key set, LED magnifier, two counterweights, three O-rings, 3D sample holder |
| Brand | North Guang Precision Instrument |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Manufacturer |
| Model | JF-3 |
| Price Range | USD 700 – 1,400 (FOB) |
| Oxygen Measurement Range | 0–100 vol% |
| Resolution | ±0.1% O₂ |
| Overall Accuracy | Class 0.2 |
| Gas Flow Control | 0–10 L/min (60–600 L/h), adjustable via dual needle valves |
| Response Time | <5 s |
| Combustion Column | Quartz glass tube, ID ≥75 mm, height 300 mm, total height 450 mm |
| Gas Linear Velocity in Column | 40 ±2 mm/s |
| Pressure Regulation | Inlet pressure 0.2–0.3 MPa |
| working pressure for O₂/N₂ | 0.05–0.15 MPa each |
| Ignition Source | Propane/butane torch with flame length 5–60 mm (standard ignition flame: 16 ±4 mm) |
| Sample Holders | Dual-configurable—self-supporting vertical clamp & non-self-supporting frame-type fixture |
| Power Supply | AC 220 V ±10%, 50 Hz, max. 50 W |
| Compliance | GB/T 2406.1–2008, GB/T 2406.2–2009, ASTM D2863, ISO 4589-2, IEC 61144, NES 714 |
| Brand | North Guang Precision Instrument |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HMPL-2000 |
| Max Test Force | 2000 N |
| Stroke Range | 0–100 mm |
| Compression Frequency | 20–120 cycles/min |
| Platen Diameter | Ø250 mm |
| Specimen Dimensions | (380±20) mm × (380±20) mm × (50±2) mm |
| Load Accuracy | ±20 N (at 750 N setpoint) |
| Display | LCD with Chinese UI |
| Compliance | GB/T 18941, ISO 3385, QC/T 56-93, JASO B408-84 |
| Brand | All Precision Instrument |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | BDJC-50kV |
| Maximum Output Voltage | 50 kV AC/DC |
| Output Current | Adjustable up to 100 mA (standard setting: 30 mA) |
| Voltage Accuracy | ≤ ±1% |
| Rising Rate Range | 10–3000 V/s (adjustable in 7 steps) |
| Power Input | AC 220 V, 3 kVA |
| Electrode Configurations | Two φ25 mm brass electrodes + One φ75 mm brass electrode |
| Test Environments | Air or transformer oil immersion |
| Compliance | Designed per IEC 60243-1, ASTM D149, GB/T 1408.1, and ISO 60243-1 |
| Safety Enclosure | Transparent acrylic shield |
| Dimensions (L×W×H) | 700 × 800 × 1500 mm |
| Weight | ~120 kg |
| Brand | North Guangjingyi / All Precision Instrument |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | China |
| Model | GDAT-C2 |
| Price | USD 4,950 (approx.) |
| Power Supply | AC 220 V ±10%, 50/60 Hz ±1% |
| Dimensions | 450 × 410 × 320 mm |
| Weight | 25 kg |
| Operating Temperature | 0–40 °C |
| Relative Humidity | <75% RH |
| Capacitance Range | 5–200 pF |
| Relative Permittivity Range | 1.000–30.000 |
| Dissipation Factor Range | 1×10⁻⁵–100 |
| DC Resistivity Range | 2.5 MΩ·m–20 TΩ·m |
| Temperature Control Range | 0–125 °C |
| Temp. Accuracy | ±0.5 °C |
| AC Test Voltage | 200–2200 V (50 Hz, continuously adjustable) |
| DC Test Voltage | 0–500 V (continuously adjustable) |
| Heating Method | Medium-frequency induction with PID control |
| Electrode Configuration | Three-electrode cell per GB/T 5654–2007, 2 mm inter-electrode gap |
| Internal Standard Capacitor | SF₆-filled three-terminal capacitor |
| Data Storage | Onboard non-volatile memory with real-time clock (RTC) |
| Display | 5.7″ TFT color touchscreen, full Chinese GUI |
| Compliance | GB/T 5654–2007, ASTM D924, IEC 60247, ISO 6296 |
| Brand | NOSELAB ATS |
|---|---|
| Origin | Italy |
| Model | IMPats 15/25/50 |
| Impact Energy Range | 0–15 J, 0–25 J, 0–50 J |
| Impact Velocity | 2.9 m/s, 3.46 m/s, 3.8 m/s (model-dependent) |
| Pendulum Moment (Impact Constant) | Calibrated per energy range |
| Load Cell Range | Matched to nominal impact energy (0–15 J / 0–25 J / 0–50 J) |
| Maximum Lifting Height | Compliant with ISO 179, ISO 180, ASTM D256, ASTM E23, DIN 53438, UNI EN ISO 13802 |
| Brand | NOSELAB ATS |
|---|---|
| Origin | Italy |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | 1120218 |
| Display | 5-digit LCD |
| Resolution | 0.001 mm |
| Accuracy | ±0.002 mm |
| Measurement Range | 0–12.5 mm or 0–25 mm (selectable) |
| Zeroing | Manual mechanical zero adjustment |
| Output Interface | RS-232 serial port (printer-compatible) |
| Power Supply | 3 V lithium battery |
| Battery Life | Up to 4000 hours of continuous operation |
| Standard Accessories | Bench-mounted base, precision anvil, calibrated contact probe |
| Optional Accessories | Weighted loading kit (for standardized compressive force), V-groove depth probe |
| Brand | Novocontrol Technologies |
|---|---|
| Origin | Germany |
| Manufacturer | novocontrol GmbH |
| Frequency Range | 3 µHz – 40 MHz (up to 3 GHz with Keysight E4991B Impedance Analyzer) |
| Temperature Range | −160 °C to +1600 °C |
| Impedance Range | 10 mΩ to 100 TΩ |
| Measurement Voltage | 10⁻⁶ V to 3 V RMS |
| DC Bias Voltage | ±40 V |
| Software | Novocontrol WinDETA v5.x with real-time multi-parameter acquisition (≥30 parameters) |
| Compliance | Fully compatible with ASTM D150, ISO 257-1/2, IEC 60250, and supports GLP/GMP audit trails per FDA 21 CFR Part 11 |
| Key | Origin: Jilin, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | NW-1000 |
| Quotation | Available Upon Request |
| Torque Range | 0–1000 N·m |
| Torque Accuracy | ±1% of reading |
| Angular Displacement Range | n × 360° (n ≤ integer limit) |
| Twist Angle Accuracy | ±0.1° |
| Brand | Nyilas |
|---|---|
| Origin | Germany |
| Model | NRT / NLN / NLH |
| Gauge Length Range | 2–100 mm |
| Deformation Measurement Range | ±10 mm |
| Relative Accuracy | ±1% |
| Absolute Accuracy | ±1 µm |
| Linearity | 0.1–0.15% of Full Scale |
| Operating Temperature Range | 4 K (−269 °C) to 373 K (+100 °C) |
| Mass | 0.6–10 g |
| Compliance | ASTM E8/E21, ISO 6892-1, ISO 15630-1, EN 10002-4, USP <1033>, FDA 21 CFR Part 11 (software-enabled audit trail) |
| Brand | NYX |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported |
| Model | CCH |
| Price Range | USD 115,000 – 175,000 |
| Brand | NYX |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Manufacturer |
| Product Category | Domestic |
| Model | CCHR |
| Application | Thermal Resistance Testing |
| Sample Form | Solid materials including textiles, leather, and other flexible or semi-rigid fabrics |
| Repeatability Error | ±0.01% |
| Pneumatic Compression Range | 0.5–8.0 psi (adjustable and precisely regulated via gravity-actuated pressure valve) |
| Heating Plate Temperature Range | Up to 371 °C ±1.5 °C |
| Compliance | Fully conforms to ASTM F1060–22 “Standard Test Method for Thermal Protective Performance (TPP) of Materials Exposed to a Radiant Heat Source” |
| Brand | NYX |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | Domestic (China) |
| Model | CHT |
| Price Range | USD 10,600 – 13,250 |
| Heating Plate Temperature Range | Ambient to 500 °C |
| Contact Surface Diameter | 25.0 ± 0.05 mm × Depth: 5.0 ± 0.02 mm |
| Thermocouple Measurement Range | ≥ 500 °C |
| Contact Force | 49 N (± 1 N) |
| Contact Speed | 5 mm/s (± 0.2 mm/s) |
| Actuation | Servo-motor-controlled heat flux sensor with programmable vertical motion |
| Horizontal Sample Platform Translation | Motorized lateral displacement for safe, repeatable specimen loading |
| Data Acquisition | PLC-based real-time logging of onset temperature, threshold time, termination temperature, and continuous surface temperature |
| Brand | NYX |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Manufacturer |
| Region of Origin | Domestic (China) |
| Model | CWT-A1-1 |
| Pricing | Upon Request |
| Measurement Principle | Transient heat flux quantification under controlled contact pressure and temperature differential |
| Test Parameter | Q-max (J/(cm²·s)) |
| Heat Plate Material | Copper |
| Heat Plate Area | 9 cm² |
| Contact Pressure | 0.1 ± 0.01 N/cm² |
| Heat Plate Temperature Range | 20–40 °C |
| Temperature Sensor Response Time | ≤ 0.2 s |
| Temperature Resolution | 0.1 °C |
| Sample Platform Temperature Control | Yes |
| Required ΔT Between Plate and Platform | 15 °C |
| Calibration Compliance | GB/T 35263-2017, FTTS-FA-019 |
| System Components | Thermally regulated copper heat plate, insulated sample stage, high-speed data acquisition card, PC-based analysis software |
| Brand | NYX |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | DS-061-5 |
| Impact Energy | 50 J |
| Impact Velocity | 10 m/s |
| Pendulum Torque (Impact Constant) | 0.25 N·m |
| Load Cell Range | 0–500 N |
| Maximum Lifting Height | 500 mm |
| Stroke | 150 ± 10 mm |
| Peak Deceleration (at 10 kg load, 500 mm drop height) | 42 ± 6 g |
| Dimensions (W×D×H) | 220 × 120 × 275 cm |
| Weight | 360 kg |
| Power Supply | AC 220 V, 50 Hz, 1500 W |
| Operating Temperature | 10–35 °C |
| Brand | NYX |
|---|---|
| Model | FFM |
| Origin | Tianjin, China |
| Manufacturer | NYX Instrument Co., Ltd. |
| Compliance Standards | GB/T 16556–2007, EN 136, KS M 6673 |
| Test Temperature | 950 ± 50 °C |
| Burner Type | Six adjustable TEKLU burners |
| Thermal Sensor | K-type thermocouple positioned 250 mm above burner apex |
| Gas Flow Control | Digital mass flow meter with numeric display |
| Supply Pressure Range | 10–50 kPa |
| Headform | Rotatable metallic anthropomorphic headform (ISO/EN-compliant geometry) |
| Dimensions (W×D×H) | 1000 × 650 × 1300 mm |
| Safety Features | Integrated flashback arrestor and flame-retention shielding |
| Brand | NYX |
|---|---|
| Model | HTI |
| Origin | Tianjin, China |
| Manufacturer Type | Direct Manufacturer |
| Compliance Standards | AQ 6103, ISO 9151, EN 367, ISO 11612, GB 38453 |
| Heat Flux | 80 kW/m² |
| Temperature Rise Targets | (24 ± 0.2) °C and (12 ± 0.1) °C |
| Measurement Principle | Calorimetric determination of heat transfer index (HTI) via copper calorimeter |
| Cooling Method | Forced-air cooling of copper calorimeter |
| Automation | Pneumatic actuation of heat shield and specimen holder |
| Data Output | HTI-24 and HTI-12 values (seconds), averaged across three replicates |
| Software Features | Real-time thermal recording, automatic heat flux correction, GLP-compliant audit trail |