Physical Property Testing Instruments
Filter
Showing 10531–10560 of 12276 results
| Brand | Tinius Olsen |
|---|---|
| Origin | USA |
| Model | SL Series |
| Load Capacity Range | 150 kN – 3000 kN |
| Accuracy | ±0.1% of indicated load (0.2–100% full scale) |
| Compliance | ASTM E4, ASTM E8/E21, ISO 7500-1, ISO 6892-1, GB/T 228.1 |
| Calibration Traceability | NIST-traceable |
| Frame Architecture | Four-column, dual-pressure hydraulic loading system |
| Control Options | ProTerm wired controller, HMC handheld Bluetooth controller, PC-based virtual controller |
| Software | Horizon Materials Testing Software |
| Frame Configurations | Fully enclosed, semi-open front, fully open front, adjustable or fixed crosshead |
| Optional Accessories | Extended columns & lead screws (up to +914 mm), environmental chambers (–185 °C to 1200 °C), hydraulic wedge grips, T-slot test tables, high-temperature furnaces, custom tooling kits |
| Brand | Tinius Olsen |
|---|---|
| Origin | United Kingdom |
| Model | ST Series |
| Instrument Type | Electromechanical Universal Testing Machine |
| Load Capacity Range | 1 kN to 300 kN (0.2%–100% load cell accuracy) |
| Crosshead Speed Range | 0.001–1000 mm/min (model-dependent) |
| Load Cell Accuracy | ±0.2% of reading from 0.2% to 100% of capacity |
| Sampling Rate | Up to 2.73 kHz per channel (software-limited to 1 kHz via USB 2.0) |
| Compliance | ASTM E4, ASTM E8/E8M, ISO 7500-1, ISO 527, ISO 6892-1, EN 10002-1, USP <1041>, FDA 21 CFR Part 11 (audit trail & electronic signature enabled) |
| Brand | Tinius Olsen |
|---|---|
| Origin | USA |
| Model | Vector U200 |
| Field of View (FOV) | 200 mm |
| Gauge Length Range | 25–180 mm (longitudinal) |
| Resolution | 0.5 µm |
| Compliance | ISO 9513 Class 0.2 / ASTM E83 Class B1 |
| Output Options | Analog (±10 V) and/or Serial Digital (RS-232/RS-485, ASCII or Modbus RTU) |
| Dimensions | 200 × 70 × 250 mm (W × H × D) |
| Marking Modes | Dot, Ring, Line, Spot, Edge Tracking, Surface Tracking |
| Brand | TLS |
|---|---|
| Origin | Spain |
| Model | T-5184 |
| Type | Universal Testing Machine |
| Application-Specific Configurations | CMT, RCT, CCT, ECT, CLT, FCT, PAT |
| Origin | Jilin, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | TLS-1KN |
| Pricing | Upon Request |
| Max Load Capacity | 1 kN |
| Force Accuracy | ±0.5% FS |
| Force Resolution | 0.1 N |
| Speed Range | 0.05–500 mm/min |
| Speed Accuracy | ±0.5% |
| Large-Deformation Measurement Range | 20–1000 mm |
| Large-Deformation Accuracy | ±0.5% |
| Crosshead Travel | 1000 mm |
| Displacement Accuracy | ±0.5% of reading |
| Effective Test Width | 550 mm |
| Indentor Diameter (for indentation hardness) | Φ200 mm |
| Support Plate Dimensions | 380 × 380 mm, with 6 mm diameter holes on 20 mm centers |
| Power Supply | AC 220 V, 1 kW |
| Brand | TMI |
|---|---|
| Origin | USA |
| Type | Automatic Elmendorf Tear Tester |
| Model | 83-20 |
| Pendulum Capacity | 0–6400 g |
| Pendulum Ranges | 400, 800, 1600, 3200, 6400 g |
| Accuracy | ±1.0% of full-scale pendulum capacity |
| Calibration Weights | 20%, 50%, and 90% of selected range |
| Measurement Range | 0–64 N |
| Measurement Principle | High-resolution digital encoder |
| Display | Digital force readout |
| Data Interface | RS-232 |
| Safety | Integrated transparent safety guard |
| Sample Notching | Automated notch cutter |
| Clamping | Pneumatic mechanical clamps |
| Language Support | English, German, French, Dutch, Italian, Spanish, Finnish |
| Statistical Output | Mean, Max, Min, Standard Deviation, Coefficient of Variation, Tear Index |
| Brand | TMI |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | 83-76 |
| Price | Upon Request |
| Display | 7" Full-Color Digital Touchscreen |
| Data Storage | Up to 200 Test Results (Editable) |
| Pendulum Options | 3200 g (83-11-06), 6400 g (83-11-07), Universal 200/400/800/1600 g (83-11-08, incl. Calibration Weights) |
| Clamping | Pneumatic Fixture with Adjustable Pressure (psi & kg/cm²) |
| Release Mechanism | Pneumatic Pendulum Release |
| Auto-Calibration | Integrated Pendulum Self-Calibration |
| Units | gf, mN, lbf, % of Pendulum Capacity |
| Statistical Output | Mean, Min/Max, Standard Deviation |
| Multi-Layer Force Calculation | Supported |
| Data Export | USB Flash Drive, USB ESC/POS Printer, RS232 Serial Interface, GraphMaster™ Software |
| Compliance Standards | TAPPI T 414, ASTM D1922, ASTM D1424, ASTM D689, ISO 1974, CPPA D.9, AS/NZS 1301.400s, BS 4468, SCAN P-11 |
| Power Supply | 120/240 VAC, 50/60 Hz |
| Air Supply | 600 kPa (87 psi), ISO Class 1–4–1 Instrument Air, 1/4" OD Tubing |
| Dimensions | 12" × 12" × 12" (305 mm × 305 mm × 508 mm) |
| Weight | 23 lbs (10.4 kg) |
| Brand | TMI |
|---|---|
| Origin | United Kingdom |
| Model | RR/ETT |
| Sample Capacity | 1–16 specimens |
| Max. Specimen Thickness | 5 mm |
| Specimen Length | 15 mm or 20 mm |
| Tear Length | 43 mm |
| Pendulum Weights | 8 N, 16 N, 32 N, 64 N |
| Pendulum Accuracy | ±0.2% of full-scale capacity |
| Display | LCD touchscreen with statistical analysis (max/min/mean/SD/CV) |
| Data Storage | Up to 100 tests on-device |
| Units | N, cN, mN, kgf, gf, lbf, ozf |
| Interfaces | RS232 for LIMS integration |
| Dimensions (L×W×H) | 40 × 50 × 55 cm |
| Weight | 57 kg |
| Brand | Tobto |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | VM1300A |
| Price | USD 365 (FOB Beijing) |
| Brand | TOFENG |
|---|---|
| Model | MC-20 |
| Type | Electromechanical Tensile & Compression Testing Machine |
| Max Test Load | 20 kN |
| Force Measurement Range | 0.4–100% of Full Scale |
| Force Accuracy | ±0.5% of reading |
| Crosshead Travel | 800 mm |
| Displacement Resolution | 1/500,000 mm |
| Test Speed Range | 0.01–500 mm/min (infinitely variable) |
| Test Width | 400 mm |
| Dimensions (W×D×H) | 780 × 560 × 1780 mm |
| Weight | 350 kg |
| Brand | TOFENG |
|---|---|
| Model | TF-320B-80L |
| Chamber Type | Vertical Upright |
| Internal Dimensions (W×H×D) | 500 × 750 × 600 mm |
| Temperature Range | −70 °C to +100 °C (optional +150 °C) |
| Humidity Range | 20–98 % RH |
| Temperature Uniformity | ±0.1 °C |
| Temperature Fluctuation | ±0.5 °C (high temp), ±1.0 °C (low temp) |
| Humidity Uniformity & Fluctuation | ±0.1 % RH |
| Heating Rate | 1.0–3.0 °C/min |
| Cooling System | Air/Water-Cooled Dual-Stage Compressor |
| Controller | TEMI Programmable Touchscreen Interface |
| Construction | SUS304 Stainless Steel Interior & Exterior |
| Insulation | High-Density Polyurethane Foam with Closed-Cell Structure |
| Compliance | GB/T 2423.1–2423.4, GB/T 10586, IEC 60068-2-1 & -2-2, GJB 150.3/4/9 |
| Brand | Tofeng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic (China-made) |
| Model | TFL-05 |
| Instrument Type | Electromechanical Tensile Testing Machine |
| Maximum Test Load | 0.1 kN |
| Force Measurement Range | 1–5000 N |
| Force Accuracy | ±0.5% of reading |
| Crosshead Travel | 700 mm |
| Displacement Resolution | 0.0001 mm |
| Brand | TOFENG |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | TFL-34S |
| Instrument Type | Electronic Tensile Testing Machine |
| Maximum Test Load | 5 kN |
| Force Measurement Range | 0.4%–100% of Full Scale (FS) |
| Force Accuracy | ±0.5% of reading |
| Crosshead Travel | 700 mm |
| Displacement Resolution | ±0.5% of reading |
| [Brand | TOFENG |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | TFW-10S |
| Instrument Type | Electromechanical Universal Testing Machine |
| Maximum Test Load | 10 kN (1000 kgf) |
| Accuracy Class | 0.5 |
| Effective Force Measurement Range | 0.2%–100% of Full Scale |
| Force Measurement Accuracy | ±0.005% of Reading |
| Force Resolution | 1/±300,000 counts (full-scale, no range switching, constant resolution) |
| Drive System | Servo Motor + Worm Gear Reducer |
| Lead Screw | High-Precision Ball Screw |
| Effective Test Width | 400 mm (customizable) |
| Max. Tensile Stroke | 800 mm (customizable) |
| Speed Range | 0.01–500 mm/min (optional extended range) |
| Displacement Measurement | Optical Encoder |
| Displacement Accuracy | ±0.005% of Reading |
| Strain Measurement | Optional Extensometer or Large-Deformation Clip-on Gauge |
| Strain Accuracy | ±0.005% of Reading |
| Safety Protection | Electronic Limit Switches, Emergency Stop Button |
| Crosshead Adjustment | Dual-Speed Motorized (Fast/Slow), Jog Control |
| Return Function | Automatic or Manual High-Speed Return to Initial Position |
| Overload Protection | Auto-shutdown at >110% of Rated Load |
| Fixture Customization | Application-Specific |
| Dimensions (W×D×H) | 800 × 550 × 1780 mm |
| Power Supply | 220 V AC, 750 W |
| Net Weight | ~380 kg] |
| [Brand | TOFENG |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Electromechanical Tensile Tester |
| Max Test Load | 5 kN |
| Load Measurement Range | 0.4%–100% FS |
| Load Accuracy | ±0.5% of reading |
| Crosshead Travel | 700 mm |
| Displacement Resolution | ±0.5% of reading |
| Compliance Standards | ASTM D638, ISO 527, GB/T 1040, ISO 11843, USP <1209>, ISO 10993-12] |
| [Brand | TOFENG |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Electronic Tensile Testing Machine |
| Model | TFW-244 |
| Max Test Force | 5 kN |
| Force Measurement Range | 0.4%–100% FS |
| Force Accuracy | ±0.5% of reading |
| Crosshead Travel | 700 mm |
| Displacement Resolution | ±0.5% of reading |
| Compliance | ASTM D638, ISO 527, GB/T 1040, ISO 1184, USP <1209> (for hydrogel adhesion and cohesion assessment)] |
| Key | Brand: TOFENG |
|---|---|
| Origin | Shanghai, China |
| Manufacturer | Yes |
| Type | Electronic Tensile Testing Machine |
| Model | TFW-249 |
| Max Test Load | 5 kN |
| Force Measurement Range | 0.4%–100% FS |
| Force Accuracy | ±0.5% of reading |
| Crosshead Travel | 700 mm |
| Displacement Resolution | ±0.5% of reading |
| Compliance Standards | GB, ISO 13934, ISO 2062, ASTM D2256, ASTM D5035, JIS L1013, DIN EN ISO 13934-1 |
| [Brand | TOFENG |
|---|---|
| Model | TFW-50G |
| Max Test Load | 200 kN |
| Load Accuracy | ±0.5% of reading |
| Test Stroke | 1000 mm |
| Displacement Resolution | 0.0001 mm |
| Temperature Range | Ambient to 300 °C |
| Temp. Uniformity | ±1 °C |
| Temp. Resolution | 0.1 °C |
| Compliance | GB/T 228.1–2021, GB/T 7314–2017, ISO 6892-1:2019, ASTM E8/E8M] |
| Brand | TOFENG |
|---|---|
| Model | WAL-1000 |
| Type | Electromechanical Horizontal Tensile Testing Machine |
| Max Test Load | 1000 kN |
| Load Measurement Range | 0.2–100% FS |
| Load Accuracy | ±0.5% |
| Adjustable Test Span | 2–25 m (excluding piston stroke) |
| Piston Stroke | 1000 mm (customizable) |
| Crosshead Speed | 0–200 mm/min |
| Displacement Resolution | 0.0001 mm |
| Load Cell | High-Precision Dual-Range Compression/Tension Load Sensor |
| Position Sensing | Optical Encoder |
| Control System | Digital Servo Controller with Force, Displacement, and Strain Closed-Loop Feedback |
| Compliance | ASTM E4, ASTM E8/E8M, ISO 6892-1, GB/T 228.1, EN 10002-1 |
| Brand | TOFENG |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | WAL-500 |
| Price Range | USD 28,000 – 70,000 |
| Instrument Type | Electromechanical Tensile Testing Machine |
| Maximum Test Load | 500 kN |
| Force Measurement Range | 0.2–100% FS |
| Force Accuracy | ±0.5% |
| Effective Test Stroke | 25 m |
| Displacement Resolution | 0.0001 mm |
| Brand | TOFENG |
|---|---|
| Model | WAL-5000 |
| Type | Electro-hydraulic Servo Horizontal Tensile Testing Machine |
| Max Test Force | 5000 kN |
| Force Measurement Range | 0.2–100% FS |
| Force Accuracy | ±0.5% |
| Stroke | 1000 mm (standard), extendable up to 25 m total test length |
| Displacement Resolution | 0.0001 mm |
| Test Speed | 0–200 mm/min (adjustable) |
| Load Frame Configuration | Rigid horizontal frame with single-rod double-acting servo hydraulic cylinder |
| Control System | Digital three-closed-loop (force, displacement, strain) servo control |
| Compliance | Designed for ASTM E4, ASTM E8/E8M, ISO 6892-1, ISO 7500-1, GB/T 228.1, and EN 10002-1 |
| [Brand | TOFENG |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Equipment Type | Hydraulic Universal Testing Machine |
| Model | WEW-1000B |
| Max. Test Load | 1000 kN |
| Force Measurement Range | 4–100% of Full Scale |
| Force Accuracy | ±1% of Indicated Value |
| Force Resolution | 1/300,000 of Maximum Load |
| Deformation Accuracy | ±1% of Indicated Value |
| Deformation Resolution | 1/300,000 of Maximum Deformation |
| Max. Tensile Space | 600 mm |
| Compression Space | 500 mm |
| Piston Stroke | 200 mm |
| Column Spacing | 585 mm |
| Round Specimen Clamping Range | Φ6–Φ40 mm |
| Flat Specimen Thickness Capacity | 0–30 mm |
| Flat Specimen Width Capacity | 75 mm |
| Compression Platen Diameter | φ160 mm |
| Clamping Method | Hydraulic |
| Overall Dimensions (W×D×H) | 910×710×2300 mm |
| Control Console Dimensions | 1100×750×1000 mm |
| Total Power | 2 kW |
| Weight | 2850 kg] |
| Brand | Tohei Industry Co., Ltd. |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | MODEL HM410 |
| Price | Upon Request |
| Fiber Diameter Range | Φ5 µm and above |
| Matrix Compatibility | Thermoplastic resins, thermosetting resins, elastomers |
| Test Temperature Range | Ambient to 400 °C |
| Test Atmosphere | Air or N₂ |
| Imaging System | Microscope-integrated CCD camera |
| Tensile Load Capacity | Up to 500 gf (≈4.9 N) |
| Crosshead Speed | 0.06 mm/min adjustable |
| Dimensions (W×D×H) | 770 × 600 × 750 mm |
| Power Supply | AC 100 V, 50/60 Hz, 500 VA |
| Brand | TOKI SANGYO |
|---|---|
| Origin | Japan |
| Model Variants | RB-85L, RB-85H, RB-85R, RB-85S, RB-85U |
| Viscosity Range | 0.6–64,000,000 mPa·s |
| Accuracy | ±2.0% of full scale |
| Repeatability | ±0.2% of full scale |
| Operating Temperature | 0–40 °C |
| Relative Humidity | <90% RH (non-condensing) |
| Wetted Materials | SUS304 & SUS303 stainless steel |
| Power Supply | AC 100–240 V ±10%, DC 12 V / 2 A output |
| Power Consumption | ≤50 VA |
| Dimensions (Main Unit) | 120 × 145 × 330 mm (E-type) |
| Base Stand | 300 × 300 × 450 mm |
| Weight | 6.0 kg (including base stand) |
| Display Options | SI (mPa·s, Pa·s), CGS (cP), or % torque units |
| Brand | TOKI SANGYO |
|---|---|
| Origin | Japan |
| Manufacturer Authorization | Authorized Distributor |
| Import Status | Imported |
| Models | RE-85L, RE-85H, RE-85R, RE-85U |
| Viscosity Range | 51.9 – 102,400 mPa·s |
| Instrument Type | Benchtop Rotational Viscometer |
| Operating Environment | Ambient Temperature |
| Sample Volume | 1 mL |
| Key Feature | Auto-Locking Cone-Plate Geometry |
| Brand | TOKI SANGYO |
|---|---|
| Origin | Japan |
| Model Variants | TR-100EL(PC), TR-100EH(PC), TR-100ER(PC), TR-100EU(PC) |
| Viscometer Type | Rotational Viscometer (Cone-and-Plate Geometry) |
| Mounting | Benchtop Fixed Installation |
| Operating Environment | Ambient Temperature |
| Viscosity Range | 15 – 320,000,000 mPa·s |
| Temperature Control Range | 10–40 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Accuracy | ±0.2 °C |
| Rotational Speed Range | 0.1–100.0 rpm (0.1 rpm increments) |
| Brand | TOKI SANGYO |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | TV-100EH Cone-Plate Viscometer – Multi-Range |
| Instrument Type | Rotational Viscometer |
| Mounting | Benchtop (Fixed) |
| Operating Environment | Ambient Temperature |
| Viscosity Range | 0.608–303,800 mPa·s (standard cone rotor 1°34′×R24) |
| Speed Range | 0.1–100.0 rpm in 0.1-rpm increments |
| Torque Range | 718.7–5749.6 µN·m (H/R/U ranges) |
| Accuracy | ±1% of full scale |
| Repeatability | ±0.2% of full scale |
| Temperature Range | 10–60 °C |
| Temp. Resolution | 0.1 °C |
| Temp. Accuracy | ±0.2 °C |
| Display | 4.3″ color TFT touchscreen |
| Data Interfaces | USB-B (PC), USB-A (printer), analog temperature sensor input |
| Power | AC 100–240 V, 15 VA |
| Dimensions (W×D×H) | 300 × 334 × 436 mm (incl. stand) |
| Weight | ~6.5 kg |
| Sample Contact Material | Stainless Steel |
| Compliance | JIS Z 8803, ISO 2555, ASTM D2196 |
| Brand | TOKI SANGYO |
|---|---|
| Origin | Japan |
| Model Variants | TV-150BM, TV-150BH, TV-150BR, TV-150BU |
| Viscosity Range | 15 – 320,000,000 mPa·s |
| Display | 5-inch full-color LCD touchscreen |
| Rotor Mounting | Tool-free magnetic locking mechanism |
| Bearing System | Magnetic suspension with single torsion wire |
| Instrument Type | Benchtop fixed-frame viscometer |
| Operating Environment | Ambient temperature (15–30 °C) |
| Compliance | Designed for ISO 2555, ASTM D2196, and USP <911> viscosity measurement protocols |
| Brand | TOKI SANGYO |
|---|---|
| Origin | Japan |
| Model | TV-150BH |
| Instrument Type | Benchtop Rotational Viscometer |
| Viscosity Range | 100 – 40,000,000 mPa·s |
| Rotational Speed | 0.1–100.0 rpm (0.1 rpm increments) |
| Accuracy | ±1.0% of full scale |
| Repeatability | ±0.2% of full scale |
| Torque Range | 718.7 µNm |
| Display | 3.5-inch color LCD touchscreen |
| Sample Environment | Ambient temperature (0–40 °C), RH <90% non-condensing |
| Wetted Materials | Stainless steel |
| Power Supply | AC 100–230 V, 20 VA |
| Dimensions (main unit) | 120 × 182 × 199 mm (W×D×H) |
| Base Dimensions | 300 × 310 × 436 mm (W×D×H) |
| Weight | ~2.4 kg |
| Standard Spindles | 4 |
| Brand | TOKI SANGYO |
|---|---|
| Origin | Japan |
| Model | TV-150BM |
| Instrument Type | Benchtop Rotational Viscometer |
| Viscosity Range | 15 – 6,000,000 mPa·s |
| Rotational Speed | 0.1–100.0 rpm (0.1 rpm increments) |
| Accuracy | ±1.0% of full scale |
| Repeatability | ±0.2% of full scale |
| Torque Range | 0–67.37 µNm |
| Display | 3.5-inch color LCD touchscreen |
| Ambient Temperature | 0–40 °C |
| Relative Humidity | ≤90% RH (non-condensing) |
| Wetted Materials | Stainless steel |
| Power Supply | AC 100–230 V |
| Power Consumption | 20 VA |
| Main Unit Dimensions | 120 × 182 × 199 mm (W×D×H) |
| Base Dimensions | 300 × 310 × 436 mm (W×D×H) |
| Weight | ~2.4 kg |
| Standard Spindles | 4 included |