Physical Property Testing Instruments
Filter
Showing 10501–10530 of 12188 results
| Brand | Top Cloud-agri |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Direct Manufacturer |
| Model | TP-GWJ-2 |
| Max Load | 50 kg / 500 N |
| Resolution | 0.01 N |
| Accuracy | ±0.1% FS |
| Dimensions | 340 × 85 × 49 mm |
| Weight | <1000 g |
| Operating Temp | −10°C to +60°C |
| Humidity Range | 0–80% RH |
| Power | AC 100–240 V, 50/60 Hz |
| Data Storage | >10,000 records |
| Units | kg, N, lb |
| Brand | Top Cloud-agri |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | TPJ-20-LG |
| Instrument Type | Thermo-Hygrometer |
| Temperature Range | −40 °C to 120 °C (±0.4 °C accuracy, 0.1 °C resolution) |
| Relative Humidity Range | 0–100 %RH (±3 %RH accuracy, 0.1 %RH resolution) |
| Dew Point Range | −40 °C to 120 °C (±0.4 °C accuracy, 0.1 °C resolution) |
| Internal Storage | 30,000 records (Flash) + optional 4 GB microSD card |
| Communication | 2G/4G cellular network |
| Power Supply | 7.4 V / 2.8 Ah Li-ion battery (with low-voltage warning & charging protection), optional 8.4 V DC input |
| GPS | Integrated GNSS module for geotagged logging |
| Sensor Expansion | Up to 32 channels via IP67-rated hub |
| Data Upload Interval | Configurable from 5 minutes to 99 hours |
| Operating Current | 10 mA (standby), variable under active sensing |
| Brand | Top Cloud-agri |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Classification | Domestic (China) |
| Model | V2.0 |
| Instrument Type | Optical Particle Counter |
| Dimensions | 33.5 × 23.3 × 0.4 cm (A4-sized backlight plate) |
| Counting Range | 10–10,000 seeds per sample |
| Counting Accuracy | ±0.2% (±2‰), up to 100% after manual correction |
| Backlight | Uniform LED backlight with 3-level brightness control via touch-enabled IC chip |
| Optional Accessories | 0.001 g precision balance, Android-based data acquisition tablet |
| Brand | TOPAS |
|---|---|
| Origin | Germany |
| Model | PSM-165 |
| Measurement Principle | Capillary Flow Porometry (CFP) |
| Pore Size Range | 0.25–130 µm |
| Max Test Pressure | 6 bar |
| Operating Fluid | TOPOR® wetting liquid (custom-formulated fluorinated inert fluid) |
| Power Supply | 110–230 V AC |
| Dimensions (W×H×D) | 480 × 390 × 310 mm |
| Weight | 12 kg |
| Compliance | ASTM E1294-89, ASTM F316-03 |
| Brand | TopFeng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | TF-310C |
| Spray Mode | Continuous Atomization |
| Fog Output | 1–2 mL per 80 cm² per 24 h |
| Nozzle Pressure | 0.5–2 kgf/cm² |
| De-misting Method | Compressed Air Ejection |
| Salt Fog Deposition Rate | Adjustable 1–2 mL/h (per 80 cm²) |
| Temperature Range | 30–70 °C |
| Internal Dimensions (W×D×H) | 60 × 45 × 40 cm |
| External Dimensions (W×D×H) | 108 × 63 × 119 cm |
| Salt Solution Tank Capacity | 15 L |
| Rated Voltage | 220 V AC |
| Power Consumption | 2.0 kW |
| Compliance | GB/T 2423.17–1993, GB/T 2423.18–2000, GB/T 10125–1997, ASTM B117–97, JIS H 8502, IEC 60068-2-11, IEC 60068-2-52, GB/T 10587–2006, GB/T 12967.3–1991 (CASS) |
| [Brand | Topfeng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | TF-340A |
| Sand Composition | 97–99% SiO₂ (silicon dioxide) |
| Sand Blowing Concentration | 1 g/m³ ± 0.25 g/m³ |
| Sand Blowing Velocity | 0–29 m/s |
| Dust Blowing Concentration | 0.1–10.6 g/m³ |
| Dust Blowing Velocity | 8.9 m/s |
| Internal Dimensions (W×D×H) | 800 × 800 × 800 mm |
| Mesh Filter | 50 µm wire diameter, 75 µm nominal spacing |
| Test Dust | Standard talcum powder per IEC 60529 & GB/T 4208 |
| Air Extraction Rate | 2 L/s |
| Vibration Duration Range | 0–99 h 59 min 59 s |
| Fan Operation Duration Range | 0–99 h 59 min 59 s |
| Dust Collection Funnel | 304 mirror-finish stainless steel interior with conical geometry |
| Enclosure Material | Powder-coated cold-rolled steel exterior |
| Control System | Weinview HMI touchscreen controller |
| Safety Protections | Overtemperature, short-circuit, fan overload, phase loss, leakage current, reverse rotation prevention, specimen protection] |
| [Brand | Topfeng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | TF-340B |
| Sand Composition | 97–99% SiO₂ (silicon dioxide) |
| Sand Blowing Concentration | 1 g/m³ ± 0.25 g/m³ |
| Sand Blowing Velocity | 0–29 m/s |
| Dust Blowing Concentration | 0.1–10.6 g/m³ |
| Dust Blowing Velocity | 8.9 m/s |
| Internal Dimensions (W×D×H) | 800 × 800 × 800 mm |
| Filter Mesh | Stainless Steel, Wire Diameter 50 µm, Pitch 75 µm |
| Dust Medium | Standardized talcum powder or limestone powder (2–4 kg/m³) |
| Vacuum Extraction Rate | 2 L/s |
| Vibration Timer Range | 0–99 h 59 min 59 s |
| Fan Timer Range | 0–99 h 59 min 59 s |
| Dust Motor Power | 300 W |
| Control System | Weinview HMI touchscreen interface |
| Cabinet Material | Interior – 304 mirror-finish stainless steel (funnel-shaped floor) |
| Power Supply | 220 V AC / 16 A |
| Safety Protections | Overtemperature, short-circuit, motor overload, earth leakage, phase sequence/missing-phase detection, reverse fan rotation prevention, operator and specimen safety interlocks |
| Operating Ambient Temperature | +5 °C to +35 °C (for cooling operation: +5 °C to +28 °C) |
| Compliance | GB/T 4208–2008 (IP Code), GB 10485, GB 4942.1–1985, GB 7000.1–2015, IEC 60529 equivalent] |
| Brand | Topfeng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Classification | Domestic (China) |
| Model | TF-W |
| Instrument Type | Electronic Tensile Testing Machine |
| Maximum Test Force | 100 kgf (≈ 0.98 kN) |
| Force Measurement Range | 0.2%–100% of Full Scale |
| Force Accuracy | ±0.5% FS |
| Test Stroke | 400 mm |
| Displacement Resolution | 0.001 mm |
| Voltage Supply | AC 220 V |
| Speed Range | 5–350 mm/min |
| Dimensions (W×D×H) | 380 × 450 × 1000 mm |
| Weight | 60 kg |
| Brand | TopFeng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | TFW-100S |
| Instrument Type | Electromechanical Universal Testing Machine |
| Maximum Test Load | 100 kN |
| Accuracy Class | 0.5 |
| Effective Force Range | 0.2–100% of Full Scale |
| Force Measurement Accuracy | ±0.005% of Reading |
| Force Resolution | 1 / ±300,000 counts (full-scale, no range switching) |
| Drive System | Servo Motor with Worm Gear Reducer |
| Lead Screw | High-Precision Ball Screw |
| Effective Test Width | 500 mm (customizable) |
| Tensile Stroke | 800 mm (customizable) |
| Test Speed Range | 0.01–500 mm/min (optional extended range) |
| Displacement Measurement | Optical Encoder |
| Displacement Accuracy | ±0.005% of Reading |
| Strain Measurement (Optional) | Extensometer with Gauge Lengths 25/50/100 mm |
| Safety Protection | Electronic Limit Switches, Emergency Stop Button |
| Crosshead Adjustment | Dual-Speed Motorized (Fast/Slow), Jog Control |
| Return Function | Automatic or Manual Return at Maximum Speed Post-Test |
| Overload Protection | Automatic Shutdown at >110% of Rated Load |
| Fixture Customization | Application-Specific Clamping Solutions |
| Dimensions (W×D×H) | 1000 × 600 × 2000 mm |
| Power Supply | 220 V AC, 3000 W |
| Approx. Weight | 800 kg |
| Brand | TopFeng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | TFW-199 |
| Price Range | USD 14,000–28,000 |
| Instrument Type | Electromechanical Tensile Tester |
| Maximum Test Load | 200 kN |
| Force Measurement Range | 0.4–100% of Full Scale |
| Force Accuracy | ±0.5% of reading |
| Crosshead Travel | 1000 mm |
| Displacement Resolution | 0.0001 mm |
| Brand | TopFeng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | TFW-200S |
| Instrument Type | Electromechanical Universal Testing Machine |
| Maximum Test Load | 200 kN |
| Accuracy Class | ISO 5893 Class 0.5 |
| Effective Force Range | 0.2–100% of Full Scale |
| Force Measurement Accuracy | ±0.005% of Reading |
| Force Resolution | 1 part in ±300,000 of Full-Scale Load (Single-Range, Constant Resolution) |
| Drive System | Servo Motor with Precision Worm Gear Reducer |
| Lead Screw | High-Accuracy Ball Screw |
| Effective Test Width | 600 mm (customizable) |
| Max. Travel Distance | 600 mm (customizable) |
| Speed Range | 0.01–500 mm/min (standard), optional extended range |
| Displacement Measurement | Optical Encoder |
| Displacement Accuracy | ±0.005% of Reading |
| Strain Measurement (Optional) | Extensometer (gauge lengths: 25/50/100 mm |
| max. extension | 5/10/25 mm) or Large-Deformation Clip Gauge (min. gauge length: 10 mm |
| max. extension | 800 mm) |
| strain accuracy | ±0.005% of reading |
| Safety Protection | Electronic Limit Switches, Emergency Stop Button |
| Crosshead Adjustment | Dual-Speed Motorized (Fast/Slow), Jog Control |
| Return Function | Automatic or Manual Return to Initial Position at Maximum Speed Post-Test |
| Overload Protection | Automatic Shutdown at >110% of Rated Load |
| Fixture Customization | Application-Specific Grips Available |
| Dimensions (W×D×H) | 1100 × 900 × 2600 mm |
| Power Supply | 380 V AC, 4 kW |
| Approx. Weight | 1500 kg |
| Brand | Topfeng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | TFW-218 |
| Instrument Type | Electromechanical Tensile Testing Machine |
| Maximum Test Load | 5000 kN |
| Load Measurement Range | 0.2–100% of Full Scale |
| Load Accuracy | ±0.5% FS |
| Test Stroke | 25 m |
| Displacement Resolution | 0.0001 mm |
| Brand | Topfeng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Electromechanical Universal Testing Machine |
| Model | TFW-317 |
| Load Capacity Range | 0.02 N to 300 kN |
| Load Accuracy | ±0.5% |
| Temperature Chamber Range | −40 °C to +100 °C |
| Temperature Control Accuracy | ±2 °C (longitudinal 100 mm) |
| Vertical Test Space (standard) | 1000 mm |
| Column Internal Width | 840 mm |
| Host Dimensions | 1250 × 560 × 2400 mm |
| Weight | ~380 kg |
| Power Supply | AC 220 V / 50 Hz ±10%, 750 W (host) |
| Brand | Topfeng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | TFW-319 |
| Price Range | USD 1,400 – 28,500 |
| Instrument Type | Electromechanical Universal Testing Machine |
| Load Capacity | 0.02 N to 300 kN |
| Load Accuracy | ±0.5% FS |
| Force Measurement Range | 0.4–100% of Full Scale |
| Force Resolution | 1/500,000 of Maximum Load |
| Deformation Measurement Range | 0.2–100% FS |
| Deformation Accuracy | ±0.5% of Reading |
| Displacement Accuracy | ±0.5% of Reading |
| Column Spacing | 840 mm |
| Test Space (Vertical) | Up to 1000 mm |
| Host Dimensions | 1250 × 560 × 2400 mm |
| Power Supply | AC 220 V / 50 Hz ±10%, 750 W |
| Weight | ~380 kg |
| Environmental Operating Range | +5 °C to +35 °C |
| Temperature Chamber Range | −40 °C to +100 °C |
| Chamber Internal Dimensions | 360 × 300 × 500 mm (W×D×H) |
| Heating Power | 1.5 kW |
| Cooling Method | Compressor-based refrigeration |
| Temperature Uniformity | ±2 °C over 100 mm axial zone |
| Ramp Rate | ≤30 min to reach +100 °C from ambient |
| Thermal Equilibration Time | ≤5 min (both above and below 0 °C) |
| Chamber Construction | 304 Stainless Steel Exterior / 316 Mirror-Finish Stainless Steel Interior |
| Insulation | Alumina-silica fiber |
| Temperature Sensor | PT100 Platinum Resistance Thermometer |
| Viewing Window | Double-sealed thermal glass |
| Safety Systems | Leakage current protection, overcurrent circuit breaker |
| Brand | Topfeng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | TFW-5S |
| Instrument Type | Electronic Universal Testing Machine |
| Maximum Test Load | 5 kN (500 kgf) |
| Accuracy Class | 0.5 |
| Effective Force Measurement Range | 0.2%–100% of Full Scale |
| Force Measurement Accuracy | ±0.005% of Reading |
| Force Resolution | 1/±500,000 codes (full-scale, no range switching, constant resolution) |
| Drive System | Servo Motor with Worm Gear Reducer |
| Lead Screw | High-Precision Ball Screw |
| Effective Test Width | 370 mm (customizable) |
| Tensile Stroke | 800 mm (customizable) |
| Test Speed Range | 0.01–500 mm/min (optional extended range) |
| Displacement Measurement | Optical Encoder |
| Displacement Accuracy | ±0.005% of Reading |
| Strain Measurement | Optional Extensometer or Large-Deformation Sensor |
| Strain Accuracy | ±0.005% of Reading |
| Safety Protection | Electronic Limit Switches, Emergency Stop Button |
| Crosshead Adjustment | Dual-Speed (Fast/Slow) Motorized Control with Jog Function |
| Return Function | Automatic or Manual High-Speed Return to Initial Position |
| Overload Protection | Auto-shutdown at >110% of Rated Load |
| Fixture Customization | Application-Specific Fixtures Available |
| Dimensions (W×D×H) | 650 × 400 × 1680 mm |
| Power Supply | 220 V AC, 750 W |
| Net Weight | ~280 kg |
| Brand | TopFeng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Category | Domestic (China) |
| Model | TFW-85 |
| Instrument Type | Electronic Universal Testing Machine |
| Maximum Test Load | 200 kN |
| Force Measurement Range | 0.2%–100% of Full Scale |
| Force Accuracy | ±0.5% of reading |
| Crosshead Travel | 1000 mm |
| Displacement Resolution | 0.001 mm |
| Control System | PC-based with Windows OS |
| Compliance | GB/T 16491–2008, JJG 475–2008, ASTM E4, ASTM E8, ISO 6892-1, DIN 50125, JIS Z 2241, BS EN ISO 6892-1 |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-1106F |
| Load Capacity | 50 N |
| Measurement Accuracy | ±1% FS |
| Resolution | 0.01 N |
| Crosshead Speed Range | 0.5–500 mm/min |
| Stroke | 200 mm |
| Power | 40 W |
| Voltage/Frequency | 220 V, 50 Hz |
| Dimensions (W×L×H) | 360 × 380 × 520 mm |
| Net Weight | 17 kg |
| Standard Accessories | Host unit, 1 sampling cutter, 10 stainless steel test plates |
| Compliant Test Standards | ASTM D6195, TLMI TT-001, FINAT FTM 1 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 12,500 (FOB China) |
| Internal Dimensions (W×H×D) | 40×35×30 cm to 70×60×60 cm |
| External Dimensions (W×H×D) | 145×180×140 cm to 190×170×270 cm |
| Hot Zone Temperature Range | RT to +200 °C |
| Cold Zone Temperature Range | RT to −70 °C |
| Test Zone Temperature Range | +60 °C to +150 °C (hot shock) |
| Switching Mechanism | Pneumatic air-door actuated, static sample placement |
| Preheat Time (RT → 150 °C) | ~30 min |
| Precool Time (RT → −70 °C) | ~85 min |
| Recovery Time | <5 min |
| Temperature Control Accuracy | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C |
| Refrigeration System | Dual-stage cascade refrigeration with semi-hermetic German compressors (R404A/R23), water-cooled condenser requiring external 10 m³/h cooling tower |
| Inner Chamber Material | Mirror-finish SUS#304 stainless steel |
| Outer Chamber Material | SUS#304 stainless steel or powder-coated steel |
| Insulation | High-density, fire-retardant PU foam |
| Standard Accessories | One 50 mm diameter cable port |
| Power Supply | AC 380 V ±5 %, 50 Hz ±0.5 Hz, 3-phase 5-wire, 2.5 m cable |
| Brand | OK |
|---|---|
| Model | OK-HH-49 / OK-HH-80 / OK-HH-150 / OK-HH-225 |
| Type | Three-Zone (Hot/Cold/Test) or Two-Zone (Hot/Cold with Basket Transfer) Thermal Shock Test Chamber |
| Internal Dimensions (W×H×D, cm) | 40×35×30 to 70×60×60 |
| External Dimensions (W×H×D, cm) | 145×180×140 to 190×170×270 |
| Hot Zone Temperature Range | RT to +200 °C |
| Cold Zone Temperature Range | RT to −70 °C |
| Test Zone Temperature Range | +60 °C to +150 °C (hot shock) |
| Temperature Uniformity | ±2.0 °C |
| Temperature Control Accuracy | ±0.5 °C |
| Shock Transition Time (Door Switching) | <5 min |
| Hot Zone Preheat Time (RT→150 °C) | ~30 min |
| Cold Zone Precool Time (RT→−70 °C) | ~85 min |
| Refrigeration System | Dual-stage cascade refrigeration with imported semi-hermetic compressors (Germany), R404A/R23 refrigerants |
| Cooling Water Requirement | 10 m³/h external cooling tower (user-supplied) |
| Construction | Interior – mirror-finish SUS#304 stainless steel |
| Power Supply | AC 380 V ±5%, 50 Hz ±0.5 Hz, 3-phase 5-wire |
| Accessories | One φ50 mm cable port |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 12,500 (FOB) |
| Temperature Range (Hot Zone) | RT to +200 °C |
| Temperature Range (Cold Zone) | RT to −70 °C |
| Test Zone Range | +60 °C to +150 °C (Hot Shock) |
| Switching Method | Pneumatic Air-Damper–Actuated Static Specimen Transfer |
| Recovery Time | <5 min |
| Temperature Uniformity | ±2.0 °C |
| Control Accuracy | ±0.5 °C |
| Refrigeration System | Dual-Stage Cascade with Semi-Hermetic German Compressors (R404A/R23) |
| Insulation | High-Density Fire-Retardant PU Foam |
| Interior Material | Mirror-Finish SUS304 Stainless Steel |
| Exterior Material | SUS304 or Powder-Coated Steel |
| Power Supply | AC 380 V ±5%, 50 Hz ±0.5 Hz, 3-Phase 5-Wire |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 12,500 (FOB) |
| Temperature Range (Hot Zone) | RT to +200 °C |
| Temperature Range (Cold Zone) | RT to −70 °C |
| Test Zone Range | +60 °C to +150 °C (hot shock), 0 °C to −45/−55/−65 °C (cold shock) |
| Switching Mechanism | Pneumatic air-door actuated static sample transfer |
| Recovery Time | ≤5 min |
| Temperature Uniformity | ±2.0 °C |
| Temperature Control Accuracy | ±0.5 °C |
| Refrigeration System | Dual-stage cascade with semi-hermetic compressors (R404A/R23) |
| Internal Construction | Mirror-finish SUS304 stainless steel |
| Insulation | High-density fire-retardant PU foam |
| Power Supply | AC 380 V ±5%, 50 Hz ±0.5 Hz, 3-phase 5-wire |
| Brand | TOYO Corporation (Japan) |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | SR-6517 |
| Pricing | Upon Request |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | EN 367 |
| Pricing | Upon Request |
| Origin | Netherlands |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | C&W |
| Spray Method | Air-Atomized Nozzle System |
| Fog Deposition Rate | 1.0–2.0 mL/80 cm²/h (adjustable per ASTM B117 & ISO 9227) |
| Nozzle Pressure | 0.7–1.0 bar (regulated) |
| De-misting Method | Compressed Air Blow-Off + Thermal Drying Cycle |
| Temperature Range | Ambient to 50 °C (±0.5 °C uniformity) |
| Humidity Control Range | 10–98% RH (±2% RH accuracy) |
| Chamber Capacities | 100 L, 200 L, 450 L, 750 L |
| Origin | Netherlands |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | DC9000 |
| Pricing | Upon Request |
| Accuracy | ±5 µm or <2% |
| Scanning Speed | 50 mm/s (with integrated speed-indicating LED) |
| Data Storage | Up to 4 full hull scans (total >10,000 individual measurement points) |
| Interface | USB-to-serial PC interface |
| Power Supply | 4 × AA batteries |
| Compliance | ISO 8502-4, ASTM D3276-05, BS 7079-B4, NACE RP0197 |
| Brand | TQC |
|---|---|
| Origin | Netherlands |
| Model | DV1300 |
| Instrument Type | Rotational Viscometer |
| Viscosity Range | 40.2 – 141 KU |
| Speed | 200 rpm |
| Resolution | 0.1 KU |
| Weight | 8.5 kg |
| Power Supply | 100–240 V, 50–60 Hz |
| Operating Temperature | +10 °C to +40 °C |
| Protection Rating | IP20 |
| Interface | Unidirectional RS232 |
| Display | 4-line backlit LCD |
| Compliance | ASTM D562, ASTM D1131, ASTM D856 |
| Brand | TQC |
|---|---|
| Origin | Netherlands |
| Model | DV1400 |
| Instrument Type | Rotational Viscometer |
| Viscosity Range | 40.2 – 141 KU (Krebs Units) |
| Operating Speeds | 20 rpm and 60 rpm (fixed) |
| Power Supply | Rechargeable battery |
| Weight | 1.8 kg |
| Display | Dual-line backlit LCD |
| Compliance | ASTM D562, ISO 2555, BS 3900-A6, EN ISO 2555 |
| Includes | Rotor set and standard sample cup |
| Origin | Netherlands |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | GV Cat |
| Price Range | USD 14,000 – 70,000 |
| Instrument Type | Specialty Tribological Tester for Canned Packaging |
| Max Friction Force | Not Specified |
| Friction Force Resolution | mN |
| Oscillation Frequency | 0–2.5 Hz |
| Stroke Length | 0.5–2 in (12.7–50.8 mm) |
| Test Duration | 0–24 h |
| Origin | Netherlands |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | LD8100 / LD8105 |
| Price | Upon Request |
| Voltage Range (LD8100) | 9 V, 90 V |
| Voltage Range (LD8105) | 9 V, 24 V, 67.5 V, 90 V |
| Max Coating Thickness Detection | 500 µm |
| Voltage Accuracy | ±5% |
| Minimum Detectable Resistance | 100 kΩ |
| Feedback Modes | Visual (LCD), Audible (Buzzer), Tactile (Vibration, optional headphone support) |
| Safety Feature | Continuity Check of Return Lead |
| Compliance Standards | ISO 8289-A, ISO 14654:1999, BS 7793-2:1996, ASTM D5162-A, JIS K 6766:2008, TM0384-2002 |
| Origin | Netherlands |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Imported |
| Model | LD8100 / LD8105 |
| Price | Upon Request |
| Voltage Range (LD8100) | 9 V, 90 V |
| Voltage Range (LD8105) | 9 V, 24 V, 67.5 V, 90 V |
| Max Coating Thickness | 500 µm |
| Voltage Accuracy | ±5% |
| Detection Sensitivity | 100 kΩ at all voltage settings |
| Feedback Modes | Visual (LCD), Audible (buzzer), Tactile (vibration), Optional Audio (headphone output) |
| Safety Feature | Return-lead continuity monitoring |
| Compliance Standards | ISO 8289-A, ISO 14654:1999, BS 7793-2:1996, ASTM D5162-A, JIS K 6766:2008, TM0384-2002 |