- All
- Favorite
- Popular
- Most rated
| Origin | Switzerland |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | SRT 5800 |
| Pricing | Upon Request |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | SL-2 |
| Pricing | Available Upon Request |
| Brand | Thwing-Albert |
|---|---|
| Origin | USA |
| Model | SL-2 |
| Sealing Temperature Range | Ambient to 400 °C |
| Temperature Resolution | ±0.1 °C |
| Temperature Accuracy | ±0.15 °C |
| Temperature Control Stability | ±0.2 °C |
| Sealing Pressure Range | 5–700 psi (34.5–4830 kPa) |
| Pressure Resolution | 1 psi (7 kPa) |
| Sealing Time Range | 200 ms–99 s (with 10 ms resolution at low load |
| Time Accuracy | ±25 ms |
| Time Repeatability | ±50 ms |
| Jaw Length | Up to 304.8 mm (12 in) |
| Jaw Width | 6.35–25.4 mm (0.25–1.00 in) |
| Jaw Surface Options | Flat, Grooved, Custom or Standard Geometric Profiles |
| Power Supply | 230 V / 50 Hz |
| Compressed Air Requirement | 80–120 psi (recommended: 90 psi) |
| Dimensions (W×D×H) | 584.2 × 400 × 620 mm |
| Weight | 72.5 kg |
| Brand | Gurley |
|---|---|
| Origin | USA |
| Model | 4110N |
| Measuring Principle | Gravity-driven piston displacement (Gurley-type) |
| Test Area Options | 1.0, 0.25, or 0.1 in² |
| Standard Piston Weight | 20 oz (567 g) |
| Applied Pressure | 4.88 in H₂O (124 Pa) |
| Volume Displaced | 25–300 mL (incremental: 25 mL first, then 50 mL steps) |
| Measurement Range (Gurley Seconds) | 2.0–2000 s (for 100 mL air at 1.0 in²) |
| Optional Low-Permeability Configuration | 5 oz piston + 0.1 in² orifice |
| Optional High-Permeability Configuration | 5 oz piston + 1.0 in² orifice |
| Cylinder Diameter | 3 in (76.2 mm) |
| Net Weight | 12–17 lbs (5.4–7.7 kg) |
| Compliance | ASTM D737, ISO 9237, TAPPI T460, GB/T 5453 |
| Brand | Gurley |
|---|---|
| Origin | USA |
| Model | 4340 |
| Pressure Requirement | ≥40.5 psi |
| Units Supported | Gurley, Sheffield, Bendtsen, Bekk |
| Compliance | ASTM D726, TAPPI T460, ISO 5636-5, ISO 8791-2 |
| Measurement Principle | Constant-pressure air flow through porous sheet materials |
| Brand | Gurley |
|---|---|
| Origin | USA |
| Model | 4171 |
| Power Supply | 110/220 V, 50/60 Hz |
| Display | Digital (LCD) |
| Output Units | mg, sin θ (1.0–7.0), or mN·m (via conversion formula) |
| Sample Capacity | Flat specimens — L 25.4–114.3 mm, W 1.27–50.8 mm, T ≤ 6.35 mm |
| Angular Adjustment | 0°–180° in 15° increments |
| Interface | RS-232 (4171-ET variant) |
| Compliance | ASTM D747, ISO 2493, TAPPI T823, GB/T 22895 |
| Origin | Spain |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | MTA-2000C |
| Pricing | Available Upon Request |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | GDP-C |
| Pricing | Available Upon Request |
| Brand | Regmed |
|---|---|
| Origin | Brazil |
| Model | REGMED-VB-21 |
| Refining Capacity | 360 g (oven-dry basis) |
| Beater Bowl Volume | 23 L |
| Roll-to-Plate Contact Force | 105 N ± 1 N |
| Roll Speed | 500 ± 10 rpm |
| Shear Velocity | ~5 m/s |
| Working Consistency | 1.57% |
| Power Supply | 220 VAC, 50/60 Hz, 2 kW |
| Dimensions (W×L×H) | 1200 × 850 × 1100 mm |
| Weight | 450 kg |
| Compressed Air Requirement | Clean, dry air, 1.5–6.0 kgf/cm² (set at 5 kgf/cm²) |
| Materials | AISI 410 hardened stainless steel (roll: 350–400 HB |
| plate | 325–375 HB) |
| Standards Compliance | TAPPI T 200, T 205 |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | WDDG |
| Pricing | Available Upon Request |
| Power Supply | 220 V AC, ~50 W |
| Carrier Gas | High-Purity Nitrogen, 5–10 L/h at ~0.5 bar inlet pressure |
| Measurement Range | 0–10 g/m²·day |
| Output | Direct digital readout across full scale (2.5-digit resolution) |
| Connected Meter | Triple-range analog meter (0–0.1 / 0–1.0 / 0–10 g/m²·day), 100 mV full-scale output |
| Accuracy | ±2% of reading or ±0.005 g/m²·day (whichever is greater) |
| Test Duration | 1–3 hours (sample-dependent) |
| Sample Diameter | 108 mm |
| Temperature Range | –20 °C to +60 °C |
| RH Gradient Generation | Compliant with DIN 53122 Part 2 |
| Dimensions (W×D×H) | 45 × 33 × 45 cm |
| Weight | 23 kg |
| Brand | T/A |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | FP-2260 |
| Price Range | USD 14,000 – 70,000 |
| Standards Compliance | ASTM D1894, D4521, D3330, F88 |
| Load Cell Options | 0.5 kg, 1 kg, 2 kg, 10 kg |
| Resolution | 0.1 g |
| Accuracy | ±0.25% of full scale |
| Force Units | g, kg, oz, lb, N |
| Test Speed | Standard: 1–20 in/min |
| High-Speed | 10–110 in/min |
| Standard Sled Masses | 200 g, 500 g, 1000 g, 3 lb |
| Test Duration | 0.1–99 s |
| Travel Distance | 0.1–14.0 in |
| Display | 240 × 64 pixel LCD |
| Data Storage | 127 test records |
| Test Area | 225 mm × 350 mm |
| Power Supply | 220 V, 50 Hz |
| Dimensions (L×W×H) | 27 in × 12 in × 7 in |
| Weight | 20 kg |
| Brand | Gurley |
|---|---|
| Origin | USA |
| Model | 4320 |
| Cylinder Weight | 20 oz |
| Test Area Options | 1.0, 0.25, or 0.1 in² |
| Applied Pressure | 4.88 in H₂O (1.2 kPa) |
| Air Volume Measured | 100 cm³ |
| Flow Time Range | 2.0–2000 s |
| Equivalent Gurley Seconds | 0.00156–25 s⁻¹ (calculated per ASTM D737) |
| Net Weight | 12–17 lbs |
| Compliance | ASTM D737, ISO 9237, TAPPI T460, GB/T 5453 |
| Brand | Thwing-Albert |
|---|---|
| Origin | USA |
| Model | ProTear |
| Measurement Principle | Elmendorf Pendulum Tear Method |
| Compliance Standards | ASTM D1922, D1424, D295, D751 |
| Display | 4-line × 16-character LCD, multi-angle viewing |
| Accuracy | ±0.2% of pendulum capacity |
| Sample ID Input | 13-character alphanumeric |
| Data Storage | Up to 99 test results |
| Statistical Functions | Mean, Std. Deviation, Min/Max, Variance |
| Units | gf, lbf, mN, % of pendulum capacity |
| Fixture | Pneumatically actuated clamping |
| Pendulum Release | Pneumatic |
| Power Supply | 220–230 V ±10%, 50 Hz |
| Power Consumption | ≤10 W |
| Dimensions (L×W×D) | 578 × 483 × 398 mm |
| Operating Temp. | 10–50 °C |
| Storage Temp. | −25–70 °C |
| Sample Compatibility | Paper, board, film, foil, nonwovens, coated fabrics, packaging laminates |
| Brand | KRK |
|---|---|
| Origin | Japan |
| Model | KRK-2500Ⅱ |
| Type | Single-Disk Refiner |
| Liquid-Wetted Material | SUS-316 Stainless Steel |
| Disc Diameter | 305 mm |
| Rotor Speed | 3,000 rpm (standard) |
| Motor Power | 22 kW / 30 kW |
| Feed Screw Speed | 30–300 rpm |
| Gap Resolution | 0.01 mm |
| Overall Dimensions | 1030 × 1440 × 1270 mm |
| Weight | 800 kg |
| Electrical Supply | 200/220 V, 3-phase DC, 50/60 Hz, 107 A |
| Cooling Water Required | Yes |
| Brand | KRK |
|---|---|
| Origin | Japan |
| Model | KRK-2511 |
| Power Supply | 380 V, 3-phase, 50/60 Hz |
| Net Weight | 450 kg |
| Gross Weight | 500 kg |
| Dimensions (W×D×H) | 780 × 550 × 1100 mm |
| Roll-to-Plate Linear Speed Differential | 6 ± 0.2 m/s |
| Compliance | ISO 5264-2:1979, QB/T 1463–1992 |
| Origin | Spain |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | 060101 |
| Price | Upon Request |
| Energy Range Options | 0–6 J (0.003 J resolution) |
| Pendulum Angle | 90° arc |
| Impact Tip Geometry | Triangular pyramid (ISO 3036-compliant) |
| Display Accuracy | ±0.1 J |
| Adjustable Clamp Pressure | Yes |
| Data Interface | RS-232 |
| Power Supply | 230 V, 50 Hz |
| Dimensions (W×D×H) | 860 × 365 × 620 mm |
| Weight | 250 kg |
| Software Compatibility | REGISTRA III data acquisition and statistical analysis suite |
| Brand | Thwing-Albert |
|---|---|
| Origin | USA |
| Model | SL-10 |
| Sealing Temperature Range | 20–400 °C (±0.15 °C accuracy) |
| Temperature Resolution | ±0.1 °C |
| Temperature Control Stability | ±0.2 °C |
| Sealing Pressure Range | 5–700 psi (34.5–4830 kPa) |
| Pressure Resolution | 1 psi (7 kPa) |
| Sealing Time Range | 100 ms–99 s |
| Time Resolution | 10 ms |
| Time Accuracy | ±1 ms |
| Time Repeatability | ±2 ms |
| Dual Load Cells (Left/Right) | 362 kg (1000 lbf) total capacity, ±0.09 kg (±0.2 lbf) accuracy & repeatability |
| Peel Load Cell | 11.34 kg (25 lbf), 0.1% FS accuracy, ASTM E-4 calibrated |
| Seal Jaw Length Options | 50.8 mm (2 in) for hot tack or 127 mm (5 in) with auto-feed turntable |
| Jaw Width Range | 6.35–25.4 mm (0.25–1.00 in) |
| Jaw Surface Configurations | Flat, Grooved, Custom, or Standard Geometric Profiles |
| Power Supply | 230 V / 50 Hz |
| Compressed Air Requirement | 80–120 psi (recommended 90 psi), integrated pressure switch |
| Dimensions (W×D×H) | 584.2 × 508 × 794.2 mm |
| Weight | 79.3 kg |
| Origin | USA |
|---|---|
| Supplier Type | Authorized Distributor |
| Import Status | Imported |
| Model | SL10 |
| Pricing | Upon Request |
| Sealing Temperature Range | Ambient to 400 °C |
| Temperature Resolution | ±0.1 °C |
| Temperature Accuracy | ±0.15 °C |
| Temperature Control Stability | ±0.2 °C |
| Sealing Pressure Range | 5–700 psi (34.5–4830 kPa) |
| Pressure Resolution | 1 psi (7 kPa) |
| Sealing Time Range | 100 ms to 99 s |
| Time Resolution | 10 ms |
| Time Accuracy | ±1 ms |
| Time Repeatability | ±2 ms |
| Dual Load Cells (Left/Right) | Combined Capacity 362 kg (1000 lbf), Accuracy ≤0.09 kg (0.2 lbf), Repeatability ≤0.09 kg (0.2 lbf), Calibrated per ASTM E4 |
| Peel Load Cell | 11.34 kg (25 lbf) capacity, 0.1% FS accuracy, ASTM E4 calibrated |
| Seal Jaw Length Options | 50.8 mm (2 in) for hot tack or 127 mm (5 in) with auto-feed turntable |
| Jaw Width Options | 6.35–25.4 mm (0.25–1.00 in) |
| Jaw Surface Configurations | Flat, Grooved, Custom, or Standard Geometric Profiles |
| Power Supply | 230 V / 50 Hz |
| Compressed Air Requirement | 80–120 psi (recommended 90 psi), integrated pressure switch |
| Dimensions (W×D×H) | 584.2 × 508 × 794 mm |
| Weight | 79.3 kg |
| Brand | Gurley |
|---|---|
| Origin | USA |
| Model | 4171 |
| Compliance | ASTM D743, TAPPI T820, ISO 2431 |
| Display | Digital (LCD) |
| Operation Mode | Semi-automatic |
| Interface | RS-232 (4171-ET variant) |
| Sample Clamping | Dual-mode — flat specimen clamp (max. thickness 6.35 mm, width 1.27–50.8 mm, length 25.4–114.3 mm) and tubular specimen holder (0°–180° rotational, 15° increments) |
| Force Range | Adjustable via 60 configurable combinations of specimen length, pendulum mass, and mass position |
| Readout Units | Scale units (1.0–7.0), mg-force, or convertible to mN·m (via standardized conversion formula) |
| Data Handling | 100-point memory, auto-averaging, programmable upper/lower limits with audible alert |
| Calibration | Built-in self-check function |
| Enclosure | Rugged carrying case included |
| Optional Accessories | Moisture electrodes (2E, 12E, 15E, 19E, 43E, 55E, 830, H3) |
Show next