Precision Geometric Measurement Instruments
Filter
Showing 331–360 of 561 results
| Brand | Kosaka Laboratory |
|---|---|
| Origin | Japan |
| Model | EC1850H |
| Bearing Type | Porous Air Bearing (Multi-Orifice, Hydrostatic) |
| Spindle Radial Accuracy | (0.02 + 0.00035H) µm (H = height in mm from turntable surface) |
| Max Measurable Diameter | Φ368 mm (internal/external), Φ470 mm (external only), Φ320 mm (internal only) |
| Max Workpiece Diameter/Load Capacity | Φ510 mm / 25 kg |
| Vertical Travel (Z-axis) | 300 mm (with extended stylus arm) |
| Automation Features | Auto-centering, Auto-tilt correction, One-touch multi-orientation probe holder, R/Z-axis servo-controlled auto-stop, Defect region annotation on polar/linear plots |
| Compliance | Designed for ISO 1101, ISO 12181 (Roundness), ISO 12180 (Cylindricity), and ASME Y14.5 geometric dimensioning and tolerancing (GD&T) workflows |
| Brand | Kosaka Laboratory |
|---|---|
| Origin | Japan |
| Model | EC2500H / EC2700H |
| Spindle Bearing Type | Porous Air Bearing |
| Radial Spindle Error (EC2500H) | (0.02 + 0.0003H) µm |
| Radial Spindle Error (EC2700H) | (0.015 + 0.0003H) µm |
| H | Height from Table Surface (mm) |
| Max. Measurable Diameter | Φ450 mm (OD/ID) |
| Max. OD Height | 570 mm |
| Max. ID Height | 420 mm |
| Max. Workpiece Diameter / Load Capacity | Φ600 mm / 60 kg |
| Vertical Stroke | 400 mm (with B-type stylus arm) |
| Parallelism Between Rotational Axis & Vertical Axis | 0.4 µm / 200 mm |
| Auto Centering & Tilt Compensation | Standard |
| Safety-Interlocked Stylus Probe | Standard |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Kosaka SE-500-59 |
| Price Range | USD 42,000 – 56,000 |
| Measurement Principle | Contact Stylus Profilometry (ISO 3274, ISO 4287, ISO 11562 compliant) |
| Vertical Measurement Range | ±400 µm (800 µm total) |
| Vertical Resolution | 0.08 nm |
| Horizontal Measurement Length | 55 mm (extendable to 81 mm via multi-trace stitching) |
| Straightness Accuracy | ≤0.3 µm over 55 mm |
| Stylus Tip Radius | 2 µm diamond |
| Stylus Force | 0.75 mN |
| Scan Speeds | 0.05–2.0 mm/s (6 discrete speeds + high-speed positioning) |
| Filter Types | Gaussian, 2RC, Special Gaussian |
| Cutoff Wavelengths (Roughness) | λc = 0.08, 0.25, 0.8, 2.5, 8.0 mm |
| Cutoff Wavelengths (Waviness) | λf = 0.8, 2.5, 8.0, 25.0 mm |
| Evaluation Parameters | 120+ standardized parameters per ISO, JIS, ANSI/ASME B46.1, and DIN 4768 |
| Display | 640×480 RGB TFT color LCD with capacitive touchscreen |
| Data Storage | USB flash drive (up to 8 GB) |
| Interface | RS-232 serial output |
| Power Supply | AC 90–240 V, 50/60 Hz, 200 VA |
| Brand | Kulite |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | RDD |
| Pricing | Upon Request |
| Brand | LEI-TECH |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Classification | Domestic (China) |
| Model | LK-SZB564 |
| Configuration | Bridge-Type |
| Operation Mode | Fully Automatic |
| Instrument Orientation | Vertical |
| Measurement Principle | Contact-Based Tactile Probing |
| Measurement Volume (X×Y×Z) | 500 mm × 600 mm × 400 mm |
| Volumetric Accuracy | E ≤ (2.8 + L/300) µm |
| Probe System | YF1 + RA20 + RA13 (TELES), with Standard Force Module and M2 Interface |
| Probe Tip Mass | 22 g |
| Length Measurement System | Reflective Metallic Tape Encoder Scale |
| Maximum Permissible Temperature Deviation | ±1 °C (Standard Environment: 18–22 °C) |
| Relative Humidity Range | 40–70 % RH |
| Power Supply | 220 V ±10 %, 50–60 Hz |
| Minimum Air Supply Pressure | ≥0.55 MPa |
| Maximum Workpiece Load | 100 kg |
| Structural Material | Granite (All Three Axes) |
| Y-Axis Guideway | P-Class Precision Linear Rail |
| Drive System | High-Performance DC Servo Motor with Timing Belt Transmission |
| Control Architecture | Dual-Computer Embedded CMM Controller |
| Software Platform | MSU3D PRO v5.x (Proprietary 3D Metrology Suite) |
| Brand | Hexagon |
|---|---|
| Origin | Sweden |
| Model | AT500 |
| Protection Rating | IP54 |
| Operating Temperature Range | −15 °C to +50 °C |
| Battery Runtime | Up to 6 h (dual IATA-compliant hot-swappable batteries) |
| PowerLock Field of View | Wide-angle automatic beam reacquisition |
| B-Probeplus | Wireless 6DoF probe, 16° angular reception at 12 m, ISO 10360-10 compliant |
| Calibration & Traceability | ISO/IEC 17025 accredited |
| Key | Brand: Leica |
|---|---|
| Model | AT500 |
| Max Measurement Range | 320 m |
| Angular Resolution | 0.07 arcsec |
| Positional Accuracy | ±0.1 mm |
| Horizontal Rotation | 360° |
| Vertical Pitch | ±145° |
| Tilt Capability | ±145° |
| IP Rating | IP54 |
| Operating Temperature | −15 °C to +50 °C |
| Laser Class | IEC 60825-1:2014 Class 2 |
| Compliance | ISO/IEC 17025, ISO 10360-10 |
| Brand | Leica |
|---|---|
| Origin | Switzerland |
| Model | Leica AT930 |
| Max Measurement Range | 160 m (diameter) |
| Horizontal Rotation | 360° |
| Vertical Pitch | ±145° |
| IP Rating | IP54 (IEC 60529) |
| Operating Temperature | 0 °C to 40 °C |
| Relative Humidity | Up to 95% (non-condensing) |
| Laser Class | Class 2, compliant with IEC 60825-1:2014 |
| Data Output Rate | 1000 Hz |
| Integrated Environmental Monitoring | Temperature, Pressure, Humidity |
| Power Options | Hot-swappable rechargeable battery & AC supply |
| Wireless Connectivity | Built-in Wi-Fi (IEEE 802.11 a/b/g/n/ac) |
| Onboard Imaging | High-resolution color panoramic camera (OVC) |
| Target Acquisition | PowerLock™ automatic target reacquisition |
| Measurement Principle | Absolute Interferometric Distance Measurement (AIFM) |
| Brand | Hexagon |
|---|---|
| Origin | Sweden |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | AT930 |
| Pricing | Upon Request |
| Brand | Hexagon |
|---|---|
| Origin | Sweden |
| Model | AT960 |
| Protection Rating | IP54 (IEC 60529) |
| Operating Temperature | 0 °C to 40 °C |
| Relative Humidity | Up to 95% non-condensing |
| Laser Class | Class 2, compliant with IEC 60825-1:2014 |
| Measurement Range Diameter | Up to 160 m |
| Data Output Rate | Up to 1000 Hz (7-DOF) |
| Power | Hot-swappable rechargeable battery pack |
| Wireless Connectivity | Integrated Wi-Fi (IEEE 802.11 a/b/g/n) |
| Environmental Compensation | Integrated temperature, pressure, and humidity sensors |
| Optical View Camera | High-resolution color OVC for remote target acquisition |
| Alignment Mode | Origin-to-Gravity (OTG) for Z-axis gravity-referenced alignment |
| Brand | Leica |
|---|---|
| Manufacturer | Hexagon Manufacturing Intelligence |
| Model | AT960 |
| Measurement Range Diameter | up to 160 m |
| Positioning Accuracy | ISO 10360-compliant (typical volumetric accuracy < 15 µm + 6 µm/m) |
| Dynamic Tracking Rate | up to 1000 Hz (7DoF output) |
| Weight | < 14 kg |
| Environmental Compensation | Integrated temperature, pressure, and humidity sensors (per ISO 10360-8 & VDI/VDE 2634 Part 2) |
| IP Rating | IP54 |
| Power | Hot-swappable Li-ion battery pack |
| Communication | Built-in Wi-Fi 802.11ac, Ethernet, Bluetooth 5.0 |
| Target Acquisition | PowerLock™ automatic beam reacquisition |
| Optical System | Absolute Interferometric Distance Meter (AIFM) with panoramic OVC camera (HD color, 120° FOV) |
| Compliance | Meets requirements for ISO 17025-accredited metrology labs, supports FDA 21 CFR Part 11 audit trails via Leica Metrology Software (LMS) |
| Brand | Leica |
|---|---|
| Origin | Switzerland |
| Model | ATS600 |
| Max Measurement Range | 80 m |
| Horizontal Rotation | 360° |
| Vertical Pitch | ±145° |
| IP Rating | IP54 |
| Operating Temperature | 0 °C to +40 °C |
| Relative Humidity | ≤95% (non-condensing) |
| Laser Class | IEC 60825-1:2014 Ed.2 Class 2 |
| Environmental Monitoring | Integrated temperature, pressure & humidity sensors |
| Brand | Leica |
|---|---|
| Origin | Switzerland |
| Instrument Type | Handheld Laser Distance Meter |
| Measurement Principle | Time-of-Flight Laser Ranging |
| Measurement Range | 0.05 m – 100 m |
| Accuracy | ±1.0 mm |
| Tilt Sensor Accuracy | ±0.3° |
| Display Resolution | 0.1 mm |
| Operating Temperature | −10 °C to +50 °C |
| IP Rating | IP54 |
| Battery Life | Up to 5,000 measurements per set of 2 x AAA batteries |
| Compliance | CE, RoHS, FDA Class I Laser Product (IEC 60825-1) |
| Brand | Leica |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | D3a |
| Pricing | Upon Request |
| IP Rating | IP65 |
| Measurement Range | 0.05–100 m |
| Typical Accuracy | ±1 mm |
| Angular Accuracy | ±0.3° |
| Angle Measurement Range | ±45° |
| Laser Class | II |
| Laser Wavelength | 635 nm |
| Max. Laser Output | <1 mW |
| Battery Life | Up to 5,000 measurements per set |
| Display | 4-line backlit LCD |
| Connectivity | Integrated Bluetooth 4.0 |
| Data Storage | Last 20 measurements |
| Environmental Protection | Splash-proof and dust-tight (IEC 60529 IP65) |
| Housing | Dual-material with shock-absorbing rubber overmold |
| Measurement Modes | Direct distance, indirect (Pythagorean), area, volume, continuous measurement, min/max tracking |
| Brand | Leica |
|---|---|
| Origin | Germany |
| Model | DM4 M |
| Type | Upright Metallurgical Microscope |
| Measurement Principle | Reflected Light Optical Microscopy (Not White Light Interferometry) |
| Automation Level | Semi-Automatic (Motorized Objective Turret, Motorized XY Stage, Adjustable LED Illumination) |
| Application Domain | Metallographic Structure Observation, Grain Size Analysis, Phase Identification, Failure Analysis, QC/QA in Metals & Alloys |
| Compliance | Designed for ISO 9001, ASTM E3, ASTM E112, ASTM E1245, ISO 643, ISO 10770-1, and GLP-compliant documentation workflows |
| Brand | HEXAGON |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic |
| Model | ATS800 |
| Price | USD 420,000 (approx.) |
| Max Measurement Range | Ø80 m |
| IP Rating | IP54 |
| Operating Temperature | 0 °C to +40 °C |
| Relative Humidity | ≤95% (non-condensing) |
| Laser Class | IEC 60825-1:2014 Ed.2 Class 1 |
| Environmental Monitoring | Integrated temperature, pressure & humidity sensors |
| Power | Rechargeable battery pack with hot-swap capability |
| Connectivity | Built-in Wi-Fi 5 (802.11ac), Ethernet, USB-C |
| Brand | Leitz |
|---|---|
| Origin | Germany |
| Configuration | Bridge-Type |
| Operation Mode | Automatic |
| Orientation | Vertical |
| Measurement Method | Combined Contact and Non-Contact |
| Software Platform | QUINDOS & PC-DMIS |
| Structural Design | Floor-Standing, No Foundation Required |
| Environmental Tolerance | Ambient Workshop Installation (No Air-Conditioned Room Required) |
| Integration Capability | CAQ Network Compatible |
| Probe System | Leitz LSP Series (Max. Probe Length: 800 mm, Max. Probe Mass: 1000 g) |
| Dynamic Performance | Up to 660 mm/s Scanning Speed, Up to 3250 mm/s² Acceleration |
| Repeatability | Sub-micron Level Across Full Volume |
| Compliance Context | Designed for ISO 10360-2, ISO 15530-3, VDI/VDE 2617, and GLP/GMP-aligned QA workflows |
| Brand | Leitz |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (China) |
| Model | PMM-G |
| Configuration | Bridge-Type |
| Operation Mode | Fully Automatic |
| Instrument Orientation | Vertical |
| Measurement Principle | Contact-Based Metrology with Multi-Sensor Integration |
| Maximum Travel Range | 7000 × 4000 × 3000 mm |
| Standard Temperature Range | 18–22 °C |
| Z-Axis Material | Ceramic |
| Guideway Material | Granite |
| Bearing System | Air Bearings with Electronic Gap Monitoring |
| Positioning Resolution | 0.005 µm |
| Vibration Isolation | Active Damping System |
| Thermal Compensation | Integrated Environmental Sensor Network |
| Safety Systems | Dual Laser Scanners + Collision Avoidance Logic |
| Compliance Framework | ISO 10360-2, ISO 15530-3, VDI/VDE 2617, ASTM E1352, GLP/GMP-Ready Data Audit Trail |
| Brand | Loobo |
|---|---|
| Origin | Shandong, China |
| Model | ONG300 |
| Type | Handheld |
| Principle | Pulsed Time-of-Flight Laser Ranging |
| Measurement Range | 0–600 m |
| Accuracy | ±0.3 m |
| Magnification | 7× |
| Objective Lens Diameter | 25 mm |
| Eyepiece Lens Diameter | 16 mm |
| Weight | ~195 g (with batteries) |
| IP Rating | IP54 |
| Operating Temperature | 0–40 °C |
| Laser Safety Class | IEC 60825-1 Class 1 |
| Measurement Modes | Distance, Height, Angle, Speed |
| Angular Range | ±90° |
| Angular Accuracy | <0.3° |
| Speed Measurement Error | ±5 km/h |
| Target Requirements | ≥2 m × 2 m surface area, near-perpendicular incidence, medium reflectivity (e.g., concrete wall), clear atmospheric conditions |
| Brand | LUMINA |
|---|---|
| Origin | USA |
| Model | AT1 |
| Type | Non-contact Profilometer / Surface Metrology System |
| Measurement Principle | Multi-modal Optical Scattering, Ellipsometry, Reflectometry, and Surface Slope Analysis |
| Sample Compatibility | Transparent (e.g., fused silica, sapphire, glass), semi-transparent (e.g., GaN, SiC), and opaque substrates (e.g., Si, GaAs, InP, metals) |
| Scan Area | Up to 300 × 300 mm |
| Wafer Handling | Supports 150 mm wafers (full-surface scan in ≤ 3 min), 50 × 50 mm samples in ≤ 30 s |
| Detection Sensitivity | Sub-nanometer vertical resolution for film thickness uniformity |
| Mechanical Architecture | Fixed-optics, non-rotating platform with high inertial damping |
| Regulatory Alignment | Designed for GLP/GMP-compliant environments |
| Origin | Imported |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Light Source | Single-Frequency Laser |
| Model | FFP-I / FFP-TF2 |
| Free Spectral Range (FSR) | Customizable per specification |
| Tuning Mechanism | Thermo-Electric Cooler (TEC) |
| Cavity Structure | All-Fiber, Lensless, Monolithic Fabry-Perot Resonator |
| Finesse | High (>1000 typical) |
| Insertion Loss | <1.5 dB |
| Polarization Dependence | <0.05 dB |
| Environmental Stability | Telcordia-qualified packaging (FFP-TF2), vibration- and shock-resistant |
| Brand | Mahr |
|---|---|
| Origin | Germany |
| Model | Digimar 817 CLM / 816 CL |
| Measurement Principle | Dual-Head Optical Encoder-Based Linear Displacement Metrology |
| Motion System | Air-Bearing Guided Motorized Carriage |
| Guide Rail Material | Stainless Steel |
| Positioning Repeatability | ≤ ±0.3 µm (typical, per ISO 230-2) |
| Temperature Compensation | Integrated Pt100 Sensor with Real-Time Linear Expansion Correction |
| Display | Backlit Graphic LCD with Icon-Based Menu Navigation |
| Data Interface | RS232 (Opto-Isolated), USB 2.0 |
| Power Supply | Rechargeable Li-ion Battery (≥8 h continuous operation) |
| Zero Setting | User-Defined Reference Point on Workpiece |
| Compliance | Designed to Support ISO/IEC 17025 Calibration Traceability Requirements |
| Software Upgrade Path | Field-Programmable Firmware via USB |
| Brand | Mahr |
|---|---|
| Origin | Germany |
| Model | MarSurf LD 130 Series |
| Measurement Principle | Stylus-based profilometry |
| Probe Type | Contact stylus |
| Max. Measuring Length | 130 mm (with 100 mm stylus) / 260 mm (with 200 mm stylus) |
| Vertical Travel | 13 mm / 26 mm |
| Vertical Resolution | Sub-nanometer |
| Residual Noise | <20 nm Rz |
| Probe Exchange | Magnetic quick-lock system |
| Structural Design | Modular architecture |
| Origin | Imported |
|---|---|
| Manufacturer Type | Distributor |
| Model | MAT |
| Price | Upon Request |
| Measurement Range | ±1.2 mm |
| Optical Magnification | 34× |
| Accuracy | 5 µm at 3 m, 50 µm at 30 m |
| Maximum Effective Measurement Distance | 30 m (extendable) |
| Linear Measurement Accuracy | ±20 µm |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | MC003-ML Series |
| Pricing | Available Upon Request |
| Measurement Range (X×Y×Z) | 1000×2000×1000 mm to 1500×3500×1200 mm |
| MPE (E₀) | 3.0 + L/250 µm to 4.2 + L/200 µm |
| Probe Error (PFTU) | 3.8–5.0 µm |
| Structural Design | Single-Side High-Frame Moving Bridge |
| Guide Material | Granite (all three axes) |
| Bearing Type | Self-Cleaning Preloaded Air Bearings |
| Drive System | Imported DC Servo Motors & Friction Rod Transmission |
| Z-Axis Counterbalance | Pneumatic Cylinder Balancing |
| Control System | German SB High-Integration CNC Controller |
| Software | AC-DMIS Metrology Suite (Proprietary, ISO 10360-2 Compliant) |
| Origin | China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model | MC012-XZ-150 |
| Motion System | Air-bearing Z-axis & Precision Linear Stage |
| Vertical Resolution | 1/65536 (equivalent to ≤0.03 µm typical interpolation resolution) |
| Vertical Range | 6 mm (extendable) |
| Horizontal Travel (X) | 150 mm |
| Z-axis Linearity Error | ≤0.2 µm over 80 mm |
| X-axis Encoder Accuracy | ≤5 µm over 150 mm |
| Workpiece Capacity | Ø1–100 mm shafts, up to Ø200 mm rings, max length 140 mm |
| Traverse Speed | 0.2–0.4 mm/s (3-step mechanical speed control) |
| Power Supply | 220 V, 50 Hz, 0.5 kW |
| Pneumatic Requirement | Clean, dry air ≥0.5 MPa |
| Origin | China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | MC012-XZ-150G |
| Quotation | Upon Request |
| Z-Axis Linear Motion Accuracy | ≤0.2 µm / 100 mm |
| X-Axis Grating Resolution | ≤3 µm / 150 mm |
| Sensor Range | 6 mm (expandable) |
| Maximum Workpiece Diameter | Ø100 mm (shaft), Ø200 mm (sleeve) |
| Effective Measurement Length | 140 mm |
| Air Bearing Stage | Closed-type Pneumatic Float |
| Traverse Speed | 0.2–0.4 mm/s (3-step mechanical speed control) |
| Power Supply | 220 V, 50 Hz, 0.5 kW |
| Clean Air Requirement | ≥0.5 MPa |
| Origin | China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model | MC012-XZ-230 |
| Motion Platform | Precision Air-Bearing Stage (Open-Type) |
| Vertical (Z) Motion Accuracy | ≤0.2 µm / 100 mm |
| Horizontal (X) Positioning Accuracy (via Linear Encoder) | ≤5 µm / 220 mm |
| Sensor Range | 12 mm |
| Resolution | 1/65536 steps |
| Measurable Shaft Diameter | Φ1–180 mm |
| Max Workpiece Outer Diameter | ≤Φ200 mm |
| Max Measurable Length | 200 mm |
| Traverse Speed | 0.05–0.4 mm/s (4-step microcomputer-controlled speed regulation) |
| Power Supply | 220 V, 50 Hz, 0.5 kW |
| Pneumatic Supply | Clean, oil-free air ≥0.5 MPa |
| Origin | China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model | MC012-Y9025B |
| Spindle Accuracy | ±0.0125 µm |
| System Accuracy | 0.03 µm |
| Data Acquisition | Hall-effect Sensor |
| Max. External Diameter | Ø140 mm (expandable) |
| Min. Internal Diameter | Ø3 mm |
| Max. Measurement Height | 300 mm (extendable) |
| Radial Range | ≤30 µm |
| Sensor Resolution | 0.01 µm |
| Max. Load Capacity | 15 kg |
| Rotational Speed | 115 rpm |
| Power Supply | 220 V, 50 Hz, 250 W |
| Air Supply Pressure | ≥0.45 MPa |
| Origin | China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model | MC012-Y9025C |
| Spindle Accuracy | ±0.025 µm |
| System Accuracy | 0.06 µm |
| Data Acquisition | Hall-effect Sensor |
| Max. External Diameter | Ø140 mm (expandable) |
| Min. Internal Diameter | Ø3 mm |
| Max. Measurement Height | 200 mm (extendable) |
| Radial Range | ≤30 µm |
| Sensor Resolution | 0.01 µm |
| Max. Load Capacity | 10 kg |
| Rotational Speed | 115 rpm |
| Power Supply | 220 V, 50 Hz, 250 W |
| Air Pressure Requirement | ≥0.45 MPa |