Precision Geometric Measurement Instruments
Filter
Showing 511–540 of 548 results
| Brand | ZEISS |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model | ATOS 5 for Airfoil |
| Quotation | Available upon Request |
| Instrument Type | Optical 3D Scanner (Structured Light) |
| Maximum Scan Area | 530 mm (diagonal) |
| Minimum Measurable Area | 100 × 70 mm² |
| Operating Software | ZEISS INSPECT |
| Brand | ZEISS |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Model | ATOS 5 |
| Instrument Category | Structured Light 3D Scanner (Stereo Photogrammetry-Based) |
| Maximum Scan Volume | 880 mm (diagonal field of view) |
| Operating Software | ZEISS INSPECT |
| Integrated Photogrammetry Module | TRITOP (optional) |
| Calibration Traceability | ISO/IEC 17025-compliant metrological validation framework |
| Brand | ZEISS |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model | ZEISS ATOS LRX |
| Pricing | Upon Request |
| Instrument Type | Structured Light 3D Scanner |
| Maximum Scan Area | 4 m² (up to 530 mm depth of field) |
| Operating Software | ZEISS INSPECT |
| Brand | ZEISS |
|---|---|
| Origin | Germany |
| Model | ATOS Q |
| Type | Optical 3D Coordinate Measuring System |
| Measurement Principle | Triple-camera triangulation with fringe projection (3-in-1 sensor head) |
| Weight | 4 kg (sensor head only) |
| Compliance | ISO 10360-8, VDI/VDE 2634 Part 2, ASTM E2924 |
| Software Platform | GOM Inspect Pro (with GD&T, mesh comparison, deviation analysis, and automated reporting) |
| Brand | ZEISS |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | ATOS Q Series (GOM Integration) |
| Price | USD 2500 per service unit (CAV Inspection Service) |
| Brand | ZEISS |
|---|---|
| Origin | Germany |
| Equipment Type | Industrial Non-Contact 3D Optical Scanner |
| Model Series | ATOS Q |
| Compliance | ISO 10360-8, VDI/VDE 2634 Part 3, ASTM E2924-15 |
| Measurement Principle | Fringe Projection Stereophotogrammetry with Dual-Camera Triangulation |
| Typical Point Accuracy | ≤ 2.5 µm (calibrated volume) |
| Repeatability | < 1.0 µm (under controlled lab conditions) |
| Field of View Options | 100 × 75 mm to 1000 × 750 mm |
| Resolution | Up to 0.5 µm per pixel (at smallest FOV) |
| Software Platform | GOM Inspect Pro (ISO 17025 traceable reporting) |
| Brand | ZEISS |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Model | ATOS Q1 |
| Price Range | USD 95,000 – 136,000 |
| Brand | ZEISS |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | ATOS Q2 |
| Price Range | USD 95,000 – 136,000 |
| Brand | ZEISS |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Regional Classification | Domestic (China-made) |
| Model | ZEISS CALENO |
| Configuration | Cantilever-Type |
| Operation Mode | Fully Automated |
| Instrument Class | Shop-Floor CMM |
| Measurement Principle | Hybrid Contact & Non-Contact (Tactile Probing + Optical Imaging) |
| Primary Application Sectors | Automotive Manufacturing, Powertrain Components, Large-Body Sheet Metal Assemblies |
| Brand | ZEISS |
|---|---|
| Origin | Germany |
| Model | CAPTUM |
| Configuration Options | direct XDT-S/VAST XXT-S or RDS-CR5 rotary probe |
| Available Sizes | 700 × 700 × 600 mm, 700 × 1000 × 600 mm, 900 × 1200 × 600 mm, 900 × 1800 × 600 mm |
| Measurement Principle | Cartesian coordinate metrology with tactile probing |
| Probe Types | Single-point (trigger) and continuous scanning (analog) |
| Environmental Compliance | Designed for ISO 10360-compliant verification environments |
| Sustainability Features | Reusable transport packaging with integrated IoT sensors, Air Saver compressed-air optimization, electrical safety interlocks, and modular shock-absorbing cradle system |
| Regulatory Alignment | Supports GLP/GMP audit trails via optional software modules |
| Brand | ZEISS |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Model | CONTURA |
| Configuration | Bridge-Type |
| Operation Mode | Automated |
| Orientation | Vertical |
| Measurement Principle | Hybrid Contact & Non-Contact (Tactile Probing + Optical Scanning) |
| Application Sectors | Electronics, Automotive, General Industrial Manufacturing |
| Sensor Compatibility | ZEISS VAST XXT, ZEISS XDT, ZEISS LineScan One, ZEISS RT-RB 100-1 Rotary Table |
| Multi-Sensor Integration | Enabled via ZEISS MASS (Modular Automation and Sensor System) Architecture |
| Axes for Optical Measurement | 4-Axis (X, Y, Z + C-axis rotation via RT-RB 100-1) |
| Brand | ZEISS |
|---|---|
| Origin | Germany |
| Model | GOM ATOS Q |
| Measurement Principle | Fringe Projection Stereophotogrammetry with Dual-Camera Triangulation |
| Typical Point Accuracy | ≤ 2 µm (system-dependent, per ISO 10360-8) |
| Field of View Options | 150 × 120 mm to 1000 × 800 mm |
| Resolution | Up to 2.5 million measured points per scan |
| Software Platform | GOM Inspect Professional (v2023+), compliant with ISO 17025 traceability workflows |
| Compliance | Supports ASTM E2924, ISO 14253-1, VDI/VDE 2634 Part 2, and GLP/GMP-aligned audit trails (21 CFR Part 11 ready via optional GOM Inspect Enterprise) |
| Brand | ZEISS |
|---|---|
| Model | GOM Scan 1 |
| Measurement Principle | Structured Blue-Light Fringe Projection |
| Sensor Type | Dual-Camera Stereo Vision System |
| Point Resolution (MV100) | 0.037 mm |
| Point Resolution (MV200) | 0.060 mm |
| Point Resolution (MV400) | 0.129 mm |
| Single-Scan Point Count | 6 million points |
| Measurement Volumes | MV100 (100 × 65 mm²), MV200 (200 × 125 mm²), MV400 (400 × 250 mm²) |
| Working Distance | 400–500 mm |
| Light Source | High-Stability Blue LED |
| Weight | ~2.5 kg |
| Dimensions | 290 × 215 × 80 mm³ |
| Interface | USB 3.0 |
| OS Compatibility | Windows 10 |
| Software | GOM Inspect Suite (included) |
| Brand | ZEISS |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | GOM Scan 1 (MV 100 / MV 200 / MV 400) |
| Price Range | USD 42,000 – 70,000 |
| Brand | ZEISS |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Regional Classification | Domestic Production |
| Model | MICURA |
| Configuration | Bridge-Type |
| Operation Mode | Fully Automatic |
| Instrument Orientation | Vertical CMM |
| Measurement Principle | Contact-Based Tactile Probing |
| Measuring Volume (X×Y×Z) | 500 × 700 × 600 mm |
| Volumetric Accuracy | < 1 µm (MPEE per ISO 10360-2) |
| Probe Systems | ZEISS VAST XT gold or VAST XTR gold active scanning probes |
| Maximum Scanning Speed | Up to 500 points/second |
| Minimum Probe Tip Diameter | 0.3 mm |
| Optional Rotary Axis | ZEISS RT-RB-100-1 4-axis rotary table |
| Compliance | ISO 10360, VDI/VDE 2617, ASTM E1379, GLP/GMP-ready data traceability |
| Brand | ZEISS |
|---|---|
| Origin | Germany |
| Model | MICURA |
| Configuration | Bridge-type |
| Operation Mode | Manual |
| Orientation | Vertical |
| Measurement Principle | Contact and Non-Contact Hybrid |
| Standard Ambient Temperature Range | 16–26 °C |
| Application Domain | Industrial Metrology |
| Structural Material | Granite Base with Ceramic Air Bearings |
| Probe System | VAST XT gold Scanning Sensor |
| Navigation Technology | VAST navigator |
| Measuring Volume | 500 × 500 × 500 mm |
| Minimum Probe Tip Diameter | 0.3 mm |
| Environmental Compensation | Dynamic Inertial Error Correction, Dual Workpiece Temperature Sensing, Active Force Control |
| Brand | ZEISS |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Model | MMZ 1 |
| Configuration | Bridge-type |
| Operation Mode | Fully Automated |
| Machine Orientation | Vertical CMM |
| Measurement Principle | Contact-Based Tactile Probing |
| Application Sectors | Automotive, Electronics, Heavy Industrial Manufacturing |
| Standard Dimensions (L×W×H) | 2000 × 3000 × 1500 mm / 2000 × 4000 × 1500 mm |
| Maximum Workpiece Weight Capacity | 5000 kg |
| Vibration Isolation | Integrated Pneumatic Isolation System |
| Guideway Protection | Bellows-Enclosed Granite Y-Axis & Steel-Reinforced X/Z-Axis Guideways |
| Probe Compatibility | ZEISS VAST® XT, VAST® XXT, and RDS Scanning Probes via MASS® Interface |
| Software Platform | CALYPSO® with VAST Navigator™ and Performance Pack (FlyScan®, QuickChange®) |
| Brand | ZEISS |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Model | MMZ T |
| Configuration | Bridge-Type |
| Operation Mode | Fully Automatic |
| Orientation | Vertical CMM |
| Measurement Principle | Contact-Based Tactile Probing |
| Maximum Workpiece Weight | 10,000 kg |
| Probe Extension Capability | Up to 1200 mm (with REACH CFX 3 MMZ extension bar) |
| Environmental Tolerance | Dust- and oil-resistant air-bearing system |
| Thermal Compensation | Multi-point axis temperature gradient compensation |
| Vibration Isolation | Integrated passive damping system |
| Air Supply Requirement | Compressed-air-free operation |
| Gear Drive | Precision helical-tooth gear drive with motorized tailstock |
| Brand | ZEISS |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Domestic (China) |
| Model | O-DETECT |
| Operation Mode | Fully Automatic |
| Measurement Volume | 300 × 200 × 200 mm³ / 500 × 400 × 300 mm³ |
| Camera | ZEISS INVENTA D1 |
| Illumination | Backlight, Coaxial LED, Top Ring Light |
| Optional Sensor | ZEISS XDT Single-Point Tactile Probe |
| Brand | ZEISS |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Model | O-INSPECT duo |
| Operation Mode | Fully Automatic |
| Camera | ZEISS Discovery.V12 Scout 160 c, 5 MP Color CMOS Sensor, 2646 × 2056 Pixels |
| Measurement Principle | Multi-sensor Fusion (Optical Imaging + Touch Probe + Laser Line Scanner) |
| Compliance Framework | ISO 10360, ISO 15530-3, VDI/VDE 2617, ASTM E29, USP <1058> (Analytical Instrument Qualification) |
| Brand | ZEISS |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Domestic (China) |
| Model | O-INSPECT |
| Operation Mode | Fully Automatic |
| Sensor Options | ZEISS Discovery V12, scout 160, scout 240 |
| Optical Resolution Enhancement | Up to 2.4× vs. standard 100-type sensor |
| Field of View | 4× wider than conventional optics |
| Illumination System | Multi-angle, multi-mode LED-based coaxial & ring lighting |
| Brand | ZEISS |
|---|---|
| Origin | Germany |
| Model | PRISMO Series |
| Configuration | Bridge-type |
| Operation Mode | Automatic |
| Application Class | Shop-floor & Laboratory |
| Measurement Range | 700 × 1000 × 500 mm to 1600 × 4200 × 1000 mm |
| Volumetric Accuracy | (0.5 + L/500) µm |
| Maximum Scanning Speed | 1 m/s |
| Standard Operating Temperature | 18–20 °C |
| Thermal Stability | Glass-ceramic scale encoders |
| Structural Material | Industrial ceramic bridge and Z-axis |
| Bearing System | ZEISS Quadrapod air-bearing guidance on all axes |
| Dynamic Compensation | Computer-Aided Accuracy (CAA) real-time error correction |
| Compliance | ISO 10360, VDI/VDE 2627 Class 3 (for PRISMO verity), GLP/GMP-ready software architecture |
| Brand | ZEISS |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Domestic (China) |
| Model | ScanBox 4105 / ScanBox 4 RC |
| Instrument Category | Laser-Based 3D Scanning CMM |
| Maximum Scanning Volume | 500 mm (diameter) |
| Sensor | Integrated ATOS Q optical 3D sensor |
| Automation | Robotic loading compatible (ScanBox 4 RC), motorized sliding door, rotary table module |
| Human-Machine Interface | Kiosk-mode touchscreen UI |
| Software Platform | Virtual Measuring Room (VMR) + ZEISS INSPECT |
| Compliance | Supports ISO 10360, VDI/VDE 2634 Part 2, and GLP/GMP-aligned audit trails via INSPECT reporting |
| Brand | ZEISS |
|---|---|
| Origin | Germany |
| Model | ZEISS Spectrum |
| Configuration | Bridge-type CMM |
| Operation Mode | Fully Automatic |
| Application Class | Shop-floor CMM |
| Measurement Method | Contact-based (Tactile) |
| Measurement Volume Range | 500 × 500 × 600 mm to 1000 × 1600 × 600 mm |
| Maximum Permissible Error (MPE<sub>E</sub>) | 1.9 + L/250 µm |
| Standard Operating Temperature | +17 °C to +35 °C |
| Probe Compatibility | ZEISS XDT direct, ZEISS VAST XXT direct, ZEISS VAST XT gold (Spectrum plus), ZEISS RDS-C5 with CAA, ZEISS RDS-C with CAA |
| Brand | ZEISS |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Model | SPECTRUM |
| Configuration | Bridge-Type |
| Operation Mode | Fully Automatic |
| Machine Architecture | Vertical CMM |
| Measurement Principle | Hybrid Contact & Non-Contact (Tactile Probing + Optical Scanning) |
| Primary Application Sectors | Automotive, Electronics, General Industrial Manufacturing |
| Sensor Platform | VAST XXT TL3 Compact Multi-Sensor Probe Head |
| Brand | ZEISS |
|---|---|
| Origin | Germany |
| Model | ZEISS SPECTRUM |
| Type | Bridge-type CMM with Active Scanning Capability |
| Sensor Compatibility | VAST XT gold, VAST XXT, RDS C with CAA |
| Angular Resolution | 2.5° step angle, 20,736 programmable probe orientations |
| MPE E₀ (Length Measurement Error) | Compliant with ISO 10360-2 |
| MPE RONₜ (Form Measurement Error) | Compliant with ISO 10360-4 |
| Thermal Stability | Glass-ceramic scale suspension system, no active temperature compensation required |
| Calibration Time | ~12 minutes for full angular calibration (RDS C + CAA) |
| Footprint | Compact design with integrated backpack-style controller and passive vibration isolation |
| Compliance | ISO 10360 series, VDI/VDE 2617, ASTM E1379, GLP/GMP-ready data traceability |
| Brand | ZEISS |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Model | SPECTRUM verity |
| Configuration | Bridge-type |
| Operation Mode | Fully Automatic |
| Orientation | Vertical CMM |
| Measurement Principle | Hybrid Contact & Non-contact (Tactile + Optical) |
| Primary Application Sectors | Automotive, Electronics, General Industrial Manufacturing |
| Sensor Platform | VAST XT gold active scanning probe system |
| Scanning Capability | Continuous high-speed tactile scanning with real-time force control |
| Brand | ZEISS |
|---|---|
| Origin | Germany |
| Model | T-SCAN |
| Measurement Volume | Up to 35 m³ |
| Depth of Field | ±50 mm |
| Laser Line Width | 125 mm |
| Working Distance | 150 mm (nominal) |
| Laser Line Frequency | up to 330 Hz |
| Point Acquisition Rate | 210,000 pts/sec |
| Average Point Spacing | 0.075 mm |
| Resolution per Scan Line | 1312 points |
| Laser Type | Diode |
| Wavelength | 658 nm |
| Laser Class | 2M |
| Scanner Weight | 1100 g |
| Scanner Dimensions | 300 × 170 × 150 mm |
| Standard Cable Length (Scanner–PC) | 10 m |
| Software Platform | ZEISS colin3D |
| Brand | ZEISS |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Regional Classification | Domestic (China-made) |
| Model | XENOS |
| Pricing | Upon Request |
| Configuration | Hybrid (Contact & Non-Contact) |
| Operation Mode | Fully Automatic |
| Structural Type | Vertical Bridge |
| Measurement Principle | Multi-sensor Metrology (Tactile Probing + Optical Scanning) |
| Primary Application Sectors | Electronics Manufacturing, Automotive OEM & Tier-1 Suppliers, Precision Industrial Components |
| Brand | ZEPTOOLS |
|---|---|
| Model | JS100B |
| Origin | Anhui, China |
| Probe Tip Radius | ≥2 µm (60° included angle, standard) |
| Probe Normal Force Range | 0.5–50 mg |
| Scan Length | 55 mm |
| Step Height Repeatability | ≤0.5 nm (1σ, 30 scans on 1 µm step standard) |
| Vertical Resolution | 0.05 nm (full scale) |
| Maximum Sample Dimensions | ≤150 mm × ≤200 mm × ≤300 mm |
| Measurement Accuracy | ±3 µm |
| Sampling Rate | 200 Hz |
| Scan Speed | 5–100 µm/s |
| XY Stage Travel | 150 mm × 200 mm (motorized) |
| XY Repeatability | ±3 µm |
| Z-Stage Travel | 10 mm |
| Rotary Stage | ±360°, 0.01° resolution |