Purification Equipment
Filter
Showing 1141–1170 of 1230 results
| Brand | ULUPURE |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | UPT-L |
| Pricing | Upon Request |
| Feedwater Quality | Municipal Tap Water (TDS < 200 ppm, Residual Chlorine ≤ 0.05 mg/L, Pressure 1.5–5 bar, Temp 5–45 °C) |
| Purification Stages | Single-Stage RO + Ultra-Purification Module |
| Resistivity | ≥17.00 MΩ·cm @ 25 °C (Online Monitoring) |
| Conductivity | ≤0.059 µS/cm @ 25 °C (Calculated Equivalent) |
| Flow Rate Options | 150–1000 L/h |
| Standard Tank Capacity | 250–1000 L (Configurable) |
| Power Supply | AC 220 V / 380 V, 50 Hz |
| Rated Power | ≥2.5 kW (Configuration-Dependent) |
| Brand | ULUPURE |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | UPT-LG |
| Pure Water Grade | Type I (GB/T 6682-2008) |
| Resistivity | ≥17 MΩ·cm |
| Power Supply | AC 220 V, 50 Hz |
| Power Consumption | 2.0–3.5 kW |
| Feed Water | Municipal tap water (TDS < 200 ppm, residual chlorine ≤ 0.05 mg/L, pressure 1.5–5.0 bar, temperature 5–45 °C) |
| Production Capacity | 150–500 L/h (configurable) |
| System Architecture | Pre-treatment + Single/Dual-stage RO + Ultra-purification |
| Storage Tank | 250 L or 500 L PE tank (model-dependent) |
| Dimensions (W×D×H) | 700 × 1063 × 1600 mm |
| Footprint | ~2.5 m² |
| Weight | 200–500 kg |
| Compliance | GB/T 6682-2008, GB 33087, GB 11446.1-2013 |
| Optional Upgrades | Stainless steel cabinet (suffix “B”), EDI module (suffix “E”), 304 stainless steel sterile tank, UV photooxidation (185/254 nm), PLC + HMI control, leak detection, remote monitoring software |
| Brand | ULUPURE |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | UPTL |
| Pricing | Upon Request |
| Purified Water Grade | ASTM Type II (RO Water) |
| Resistivity | 17–18.2 MΩ·cm @ 25 °C |
| Heavy Metals & Soluble Silica | < 0.1 ppb |
| Particles (> 0.1 µm) | ≤ 1 particle/mL |
| UV Wavelength | 254 nm (Low-pressure mercury lamp) |
| Feed Water Requirements | TDS ≤ 200 ppm (UPTL-I), 1000 ppm (UPTL-II) |
| Pressure | 0.30–0.40 MPa |
| Temp | 5–45 °C |
| RO Output Conductivity | ≤ 2% of feed conductivity or 1–5 µS/cm |
| UP Output Microbial Count | ≤ 1 CFU/mL |
| Dimensions (UPTL-I) | 530 W × 575 D × 1070 H mm |
| Weight (20–40 L config) | ~38 kg |
| Power Supply | AC 220 V, 50 Hz (75–350 W) |
| Brand | Deepflow |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (China) |
| Model | CYASMUVA1 |
| Pricing | Available Upon Request |
| Brand | UXS |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Vacuum Centrifugal Concentrator |
| Temperature Range | Ambient to 60 °C |
| Temperature Control Accuracy | ±1 °C |
| Sample Capacity | 300 mL per position (16 positions) |
| Solvent Collection Flask Capacity | Up to 2000 mL (round-bottom or flat-bottom) |
| Contact Materials | PTFE, PEEK, EPDM, Borosilicate Glass |
| Control Interface | 7-inch color touchscreen |
| Method Storage | 50 user-defined protocols |
| ECO² Mode | Enabled for energy and solvent conservation |
| Real-time Parameter Display | Vacuum level (mbar), vortex speed (rpm), bath temperature (°C), elapsed time |
| In-Run Parameter Adjustment | Vortex speed adjustable during operation with auto-save to active method |
| Brand | VICI |
|---|---|
| Origin | USA |
| Model | Valco HP2 |
| Gas Compatibility | He, Ar, Ne, Kr, Xe, Rn |
| Max Operating Pressure | 1000 psi |
| Impurity Removal Limit | <10 ppb (H₂O, H₂, O₂, N₂, CO, NO, NH₃, CO₂) |
| Excluded Gases | He, Ar, Ne, Kr, Xe, Rn (i.e., does not remove carrier gas itself) |
| Heating Control | Integrated thermal regulation system |
| Certification | CE compliant |
| Power Options | 110 VAC or 230 VAC |
| Replacement Cartridge Part No. | MNK283165 (He) |
| Mounting | In-line upstream of GC inlet |
| Brand | RSJ |
|---|---|
| Origin | Fujian, China |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Domestic |
| Model | VISION |
| Pricing | Upon Request |
| Purified Water Grade | Type I (ASTM D1193) |
| Resistivity | ≥18.0 MΩ·cm @ 25 °C |
| Production Capacity | 0.5–10 T/H (Customizable) |
| Compliance | GB/T 11446.1–2013 (EW-I), ASTM D5127–2013(2018) Type E1.2 |
| Process Configuration | RO + RO + EDI + Polishing DI |
| Display | 10″ Color Touchscreen (Chinese UI) |
| Connectivity | IoT-enabled Remote Monitoring & Control |
| Certifications | China Network Access License for Telecommunications Equipment |
| Data Logging | Real-time & Historical Alarm Records, Consumable Lifetime Tracking, Digital Parameter Dashboard |
| Brand | Wasserlab |
|---|---|
| Origin | Spain |
| Model | AUTWOMATIC |
| Output Water Grades | ASTM Type II & Type III (RO water) |
| Conductivity | <1 µS/cm |
| Flow Rates | 3 / 5 / 10 L/h |
| Daily Production Capacity | 30 / 50 / 100 L |
| RO Tank Volume | 30 / 50 L |
| Power Supply | 110–220 VAC, 50–60 Hz |
| Dimensions (H×W×D) | 52 × 25 × 48 cm |
| Weight | 15 kg |
| Feed Water Requirements | Min. pressure 2 bar, Max. pressure 6 bar, Max. temperature 30 °C, Max. hardness 300 ppm (as CaCO₃), SDI < 5, Max. feed conductivity 1500 µS/cm, Free chlorine < 1 ppm, Turbidity < 1 NTU |
| Brand | Wasserlab |
|---|---|
| Origin | Spain |
| Model | Autwomatic Plus 1+2 |
| Purified Water Grade | ASTM Type II / ISO 3696 Class 2 |
| Ultrapure Water Grade | ASTM Type I / ISO 3696 Class 1 |
| Resistivity | 18.2 MΩ·cm @ 25 °C |
| TOC | <3 ppb |
| Endotoxins | <0.03 EU/mL |
| Bacteria | <1 CFU/mL |
| Final Filtration | 0.22 µm PES membrane |
| Flow Rate (Ultrapure) | 1.1 L/min |
| Flow Rate (Pure) | 3/5/10 L/h |
| Feed Water Requirements | Conductivity ≤1500 µS/cm, Pressure 2–6 bar, Temp ≤30 °C, SDI <5, Turbidity <1 NTU, Free Chlorine <1 ppm, Hardness ≤300 ppm CaCO₃ |
| Power Supply | 110–220 VAC, 50–60 Hz |
| Dimensions (H×W×D) | 60×36×49 cm |
| Weight | 35 kg |
| Integrated Pressure Storage Tank | Yes |
| Brand | Wasserlab |
|---|---|
| Origin | Spain |
| Model | AUTWOMATIC PLUS |
| Output Water Quality | Type II (ASTM D1193-20) and Type III (RO) Water |
| Conductivity | <1 µS/cm |
| TOC | <50 ppb (with UV option) |
| Bacterial Count | <1 CFU/mL (with 0.22 µm final filter) |
| Flow Rate | 3–10 L/h |
| Integrated Pressure Tank | 30/50 L |
| Display | 4.3" Touchscreen Interface |
| Power Supply | 110–220 VAC, 50–60 Hz |
| Feed Water Requirements | Max. 1500 µS/cm conductivity, <1 ppm chlorine, <1 NTU turbidity, SDI <5, hardness ≤300 ppm CaCO₃, temp. ≤30 °C, pressure 2–6 bar |
| Brand | Wasserlab |
|---|---|
| Origin | Spain |
| Model | ECOMATIC |
| Output Water Grade | ASTM Type II & Type III (RO Water) |
| Conductivity | < 1 µS/cm |
| Flow Rates | 3 / 5 / 10 L/h |
| Max Daily Production | 30–100 L |
| RO Tank Capacity | 30 / 50 L |
| Control Interface | Membrane Keypad with Visual/Audible Alarms |
| Power Supply | 110–220 VAC, 50–60 Hz |
| Dimensions (H×W×D) | 45 × 25 × 48 cm |
| Weight | 12 kg |
| Feed Water Requirements | Min. Pressure 2 bar, Max. Pressure 6 bar, Max. Temp. 30 °C, Max. Hardness 300 ppm (as CaCO₃), SDI < 5, Max. Feed Conductivity 1000 µS/cm, Free Chlorine < 1 ppm, Turbidity < 1 NTU |
| Brand | Wasserlab |
|---|---|
| Origin | Spain |
| Model | ULTRAMATIC GR |
| Output Water Grade | Type I (ASTM D1193-20) |
| Resistivity | 18.2 MΩ·cm at 25 °C |
| TOC | <10 ppb |
| Bacterial Count | <1 CFU/mL |
| Flow Rate | 1.1 L/min |
| Final Filtration | 0.22 µm PES membrane |
| Power Supply | 110–220 VAC, 50–60 Hz |
| Dimensions (H×W×D) | 52 × 25 × 48 cm |
| Weight | 12 kg |
| Feed Water Requirements | Conductivity ≤20 µS/cm, Pressure 1–6 bar, Temp ≤30 °C |
| User Interface | Membrane keypad with LCD display |
| UV Lamp | Integrated 185/254 nm dual-wavelength lamp |
| Real-time Monitoring | Resistivity, temperature, operating hours, filter status, alarm triggers |
| Brand | Wasserlab |
|---|---|
| Origin | Spain |
| Model | ULTRAMATIC PLUS |
| Output Water Grade | Type I (ASTM D1193-20, ISO 3696:1987 Class 1) |
| Resistivity | 18.2 MΩ·cm at 25 °C |
| TOC | <3 ppb |
| Endotoxin | <0.03 EU/mL |
| Bacterial Count | <1 CFU/mL |
| Flow Rate | 1.1 L/min |
| Feed Water Conductivity Limit | ≤20 µS/cm |
| Operating Pressure Range | 1–6 bar |
| Feed Water Temperature | ≤30 °C |
| Power Supply | 110–220 VAC, 50–60 Hz |
| Dimensions (H×W×D) | 60 × 36 × 49 cm |
| Weight | 35 kg |
| Terminal Filtration | 0.22 µm hydrophilic membrane |
| Brand | Deepflow |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (PRC) |
| Model | CYPF07743 |
| Pricing | Available Upon Request |
| Brand | Deepflow |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | CYPF05380 |
| Pricing | Available Upon Request |
| Brand | Deepflow |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | CYPF07744 |
| Pricing | Available Upon Request |
| Brand | Deepflow |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | CYPF05381 |
| Pricing | Available Upon Request |
| Brand | WIGGENS |
|---|---|
| Origin | Germany |
| Model | DPM24E24 |
| Heating Method | Dry-block heating |
| Oscillation Speed Range | 150–800 rpm (1 rpm resolution, 10 rpm increment) |
| Pulse Frequency | 1–100 pulses/min |
| Duty Cycle | 1–99% |
| Timer Range | 1 sec–24 hr |
| Platform Temperature | Up to 80 °C |
| Base Block Temperature | Up to 105 °C |
| Orbital Displacement | 0.070° |
| Dimensions (W×D×H) | 48.9 × 58.4 × 50.8 cm |
| Platform Size | 25.4 × 30.5 cm |
| Weight | 36.3 kg |
| Compliance | Designed for EPA-compliant sample preparation workflows |
| Interface | USB port, optional PC software control |
| Safety | Over-temperature protection, integrated exhaust fan for solvent recovery cabinets |
| Brand | WIGGENS |
|---|---|
| Origin | Germany |
| Construction Material | SCHOTT DURAN 3.3 borosilicate glass |
| Heating Element | CrNi 4876 stainless steel immersion heater |
| Output Conductivity | ~1 µS/cm at 25 °C |
| Feed Water | Tap water |
| Cooling Water Inlet Temperature | >60 °C |
| Power Supply Options | 230 V / 14 A (4 L/h) |
| Base Dimensions | 300 × 300 mm |
| Safety Features | Automatic water level control, dry-run protection |
| Operating Cost | Negligible (no consumables or regeneration required) |
| Brand | WIGGENS |
|---|---|
| Origin | Germany |
| Model | FlexiVap |
| Heating Method | Dry-block heating |
| Temperature Range | Up to 100 °C |
| Temperature Stability | ±0.5 °C |
| Sample Positions | 24 or 48 |
| Heating Power | 150 W |
| Brand | WIGGENS |
|---|---|
| Origin | Germany |
| Model | RE10 |
| Capacity | 5 L |
| Rotation Speed | 5–300 rpm |
| Temperature Range | RT +5 to 180°C (oil bath), RT +5 to 85°C (water bath) |
| Temperature Control Accuracy | ±0.2°C |
| Condenser Surface Area | 1500 cm² |
| Brand | WIGGENS |
|---|---|
| Origin | Germany |
| Type | Sub-boiling Distiller |
| Construction | Fully 304 Stainless Steel (chamber, immersion heater, condenser, outlet) |
| Output Rate | 3.5 L/hr or 7 L/hr |
| Conductivity | ≤2.5 µS/cm at 20°C |
| Resistivity | ≥0.4 MΩ·cm at 20°C |
| Safety Features | Low-level cutoff, pressure-relief valve, auto-shutdown on cooling water failure |
| Compliance | EN 61010-1:2002, EN 50082-1:1992, EN 50081-2:1994, Directive 2006/95/EC (LVD), 2004/108/EC (EMC), 2006/42/EC (Machinery) |
| Power Supply | 220 V / 50 Hz |
| Input Power | 3000 W (DA001) or 6000 W (DA002) |
| Dimensions (W×D×H) | 250×220×440 mm (DA001), 260×260×630 mm (DA002) |
| Weight | 12 kg (DA001), 14 kg (DA002) |
| Brand | WIGGENS |
|---|---|
| Origin | Germany |
| Model | WB-502C |
| Instrument Type | Vacuum Centrifugal Concentrator |
| Temperature Range | 40–80 °C (ambient) |
| Temperature Accuracy | ±0.1 °C |
| Sample Capacity | 1.5 mL × 132, 15 mL × 12, 50 mL × 8, 96-well plates × 2 |
| Maximum Rotational Speed | ≤1500 rpm |
| Vacuum System | PTFE-coated diaphragm pump (WIGGENS C410), ultimate vacuum ≥13 mbar |
| Cooling Trap | Integrated −20 °C cold trap (2 L capacity) |
| Heating Method | IR-heated glass lid + optional conductive heating |
| Control | PID temperature control, touch-key LED panel |
| Timer Range | 0–99 h 59 min |
| Dimensions (W×D×H) | 670 × 685 × 480 mm |
| Power Supply | 220 V, 50/60 Hz, 1200 W |
| Brand | WIGGENS |
|---|---|
| Origin | Germany |
| Model | WB-502C |
| Temperature Range | 4–80 °C |
| Temperature Accuracy | ±0.1 °C |
| Sample Capacity | 132 × 1.5 mL tubes |
| Max Rotor Speed | ≤1500 rpm |
| Vacuum System | PTFE-coated diaphragm pump (WIGGENS C410), ultimate vacuum ≥13 mbar |
| Integrated Cold Trap | −20 °C |
| Heating Options | IR-only / IR + conductive / conductive-only |
| Timer Range | 00:01–99:59 (h:min) |
| Dimensions (W×D×H) | 670 × 685 × 480 mm |
| Power Supply | 220 V, 50/60 Hz, 1200 W |
| Brand | WIGGENS |
|---|---|
| Origin | Germany |
| Model | WB-503C |
| Temperature Range | 35–65 °C |
| Temperature Control Accuracy | ±0.1 °C |
| Rotational Speed Options | 1700 / 2500 / 5000 rpm |
| Heating Modes | Infrared Only / Infrared + Conductive / Conductive Only |
| Vacuum Source | PTFE-Coated Corrosion-Resistant Diaphragm Pump |
| Ultimate Vacuum | 100 mbar |
| Chamber Capacity | 0.5 mL × 50 |
| Timer Range | 0–99 h 59 min |
| Power Supply | 220 V, 50/60 Hz, 200 W |
| Dimensions (W×D×H) | 213 × 255 × 255 mm |
| Certifications | CE, RoHS 5 |
| Brand | WIGGENS |
|---|---|
| Origin | Germany |
| Model | WB-503G |
| Heating Method | Dry-block heating |
| Temperature Range | Ambient +5 °C to 120 °C |
| Temperature Stability | ±0.1 °C |
| Sample Capacity | 20 positions |
| Tube Diameters Supported | 11 mm, 13 mm, 16 mm |
| Heating Power | 125 W |
| Dimensions (W×D×H) | 310 × 250 × 435 mm |
| Weight | 6 kg |
| Power Supply | 110/220 V, 50/60 Hz |
| Brand | WIGGENS |
|---|---|
| Origin | Germany |
| Model | WB-504C |
| Instrument Type | Vacuum Centrifugal Concentrator |
| Temperature Range | 4–80 °C |
| Temperature Control Accuracy | ±0.1 °C |
| Sample Capacity | 250 mL × 4 positions |
| Rotational Speed | ≤1500 rpm |
| Ultimate Vacuum | ≥2 mbar |
| Cold Trap | −20 °C, 2 L collection volume |
| Dimensions (W×D×H) | 600 × 630 × 1085 mm |
| Weight | 138 kg |
| Power Supply | 220 V, 50/60 Hz |
| Brand | WIGGENS |
|---|---|
| Origin | Germany |
| Model | WB-504C |
| Temperature Range | 35–65°C |
| Temperature Control Accuracy | ±0.1°C |
| Maximum Rotational Speed | ≤1500 rpm |
| Vacuum Level | ≥2 mbar |
| Integrated Cold Trap | −20°C, 2 L capacity |
| Chamber Dimensions (W×D×H) | 600 × 630 × 1085 mm |
| Weight | 138 kg |
| Power Supply | 220 V, 50/60 Hz |
| Brand | WIGGENS |
|---|---|
| Origin | Germany |
| Heating Method | Dry-block heating |
| Temperature Range | Ambient to 100 °C |
| Temperature Uniformity | ±0.5 °C |
| Sample Tube Diameter Compatibility | 12 mm to 62 mm |
| Gas Flow Rate | 1–100 mL/min |
| Throughput Options | 2, 8, 12, 24, 28, 48, or 96 positions |
| Heating Power | 500 W |
| Brand | Xinbaili (New Biolink) |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | High-Salinity and Refractory Wastewater Treatment System |
| Pricing | Available Upon Request |
| Sample Processing Capability | Industrial and Laboratory-Scale Wastewater Treatment |