Purification Equipment
Filter
Showing 451–480 of 1230 results
| Brand | Hanuo |
|---|---|
| Origin | Shanghai, China |
| Model | HNDK200-1 |
| Heating Method | Dry-block heating |
| Temperature Range | Ambient +5°C to 150°C |
| Temperature Stability | ±0.5°C @ 100°C |
| Temperature Accuracy | ±0.5°C (40–100°C), ±1.0°C (100–150°C) |
| Sample Capacity | 12 positions |
| Tube Diameter Compatibility | 10–19 mm |
| Nitrogen Flow Rate | 0–10 L/min |
| Max. Nitrogen Pressure | ≤0.1 MPa |
| Heating Power | 150 W |
| Display Resolution | 0.1°C |
| Timer Range | 0–99 h 59 min |
| Safety Features | Over-temperature protection, real-time fault detection & audible alarm |
| Gas Distribution | Individual on/off control per channel (12-channel manifold) |
| Adjustable Height | Gas needle and heating block height independently adjustable |
| Standard Needle Length | 150 mm |
| Display Type | LED |
| Brand | Hanuo |
|---|---|
| Origin | Shanghai, China |
| Model | HNDK200-1 |
| Heating Method | Dry-block heating |
| Temperature Range | Ambient +5°C to 150°C |
| Temperature Stability | ±0.5°C (at 100°C) |
| Temperature Accuracy | ±0.5°C (40–100°C), ±1.0°C (100–150°C) |
| Sample Capacity | 12 positions |
| Tube Diameter Compatibility | Up to 16 mm |
| Nitrogen Flow Rate | 0–10 L/min |
| Max Operating Pressure | ≤0.1 MPa |
| Heating Power | 150 W |
| Timer Range | 0–99 h 59 min |
| Display | LED, 0.1°C resolution |
| Safety Features | Over-temperature protection, real-time temperature monitoring, automatic fault detection and audible alarm |
| Module Dimensions | 95.5 × 76.5 × 50 mm (standard block) |
| Brand | Hanuo |
|---|---|
| Origin | Shanghai, China |
| Model | HNDK200-1 |
| Heating Method | Dry-block heating |
| Temperature Range | Ambient +5°C to 150°C |
| Temperature Stability | ±0.5°C (at 100°C) |
| Temperature Accuracy | ±0.5°C (40–100°C), ±1.0°C (100–150°C) |
| Sample Capacity | 12 positions |
| Tube Diameter Compatibility | 12–16 mm |
| Nitrogen Flow Rate | 0–10 L/min |
| Maximum Nitrogen Pressure | ≤0.1 MPa |
| Heating Power | 150 W |
| Warm-up Time | ≤30 min (from 40°C to 150°C) |
| Timer Range | 0–99 h 59 min |
| Display | LED, 0.1°C resolution |
| Safety Features | Over-temperature protection, real-time temperature monitoring, automatic fault detection and audible alarm |
| Construction | Adjustable gas manifold with vertically movable gas needles (standard length: 150 mm), ventilated cabinet-compatible design |
| Brand | Hanuo |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | HNDK200-2 |
| Price | USD 1,200 (FOB Shanghai) |
| Heating Method | Dry Block Heating |
| Temperature Range | Ambient +5°C to 150°C |
| Temperature Stability | ±0.5°C at 100°C |
| Tube Diameter Compatibility | 10–19 mm |
| Nitrogen Flow Rate | 0–10 L/min |
| Sample Capacity | 24 positions |
| Heating Power | 200 W |
| Temperature Display Resolution | 0.1°C |
| Timer Range | 0–99 h 59 min |
| Max Operating Pressure | ≤0.1 MPa |
| Safety Features | Over-Temperature Protection, Real-Time Fault Detection & Audible Alarm |
| Control Interface | LED Display with Dual Parameter Monitoring (Temp + Time) |
| Brand | Hanuo |
|---|---|
| Origin | Shanghai, China |
| Heating Method | Dry-block heating |
| Temperature Range | Ambient +5°C to 150°C |
| Temperature Stability | ±0.5°C at 100°C |
| Temperature Accuracy | ±0.5°C (40–100°C), ±1.0°C (100–150°C) |
| Sample Capacity | 24 positions |
| Tube Diameter Compatibility | 10–29 mm |
| Nitrogen Flow Rate | 0–10 L/min |
| Max Operating Pressure | ≤0.1 MPa |
| Heating Power | 150 W |
| Display Resolution | 0.1°C |
| Timer Range | 0–99 h 59 min |
| Safety Features | Over-temperature protection, real-time fault detection & audible alarm |
| Module Configuration | Dual interchangeable heating blocks (standard: two 12-position blocks) |
| Brand | Hanuo |
|---|---|
| Origin | Shanghai, China |
| Model | HNDK200-2 |
| Heating Method | Dry-block heating |
| Temperature Range | Ambient +5°C to 150°C |
| Temperature Stability | ±0.5°C at 100°C |
| Temperature Accuracy | ±0.5°C (40–100°C), ±1.0°C (100–150°C) |
| Sample Capacity | 24 positions |
| Tube Diameter Compatibility | Up to 16 mm (standard) |
| Gas Flow Rate | 0–10 L/min |
| Gas Pressure Limit | ≤0.1 MPa |
| Heating Power | 400 W |
| Block Dimensions | 95.5 × 76.5 × 50 mm (per module) |
| Unit Dimensions | 280 × 220 × 500 mm |
| Display | LED, 0.1°C resolution, timer up to 99 h 59 min |
| Safety Features | Over-temperature protection, real-time fault detection with audible alarm, adjustable gas manifold height, ventilated cabinet compatibility |
| Optional Accessories | M-series interchangeable modules, precision nitrogen flow control valve |
| Brand | Hanuo |
|---|---|
| Origin | Shanghai, China |
| Model | HNDK200-2 |
| Heating Method | Dry-block heating |
| Temperature Range | Ambient +5 °C to 150 °C |
| Temperature Stability | ±0.5 °C (at 100 °C) |
| Tube Compatibility | 6–40 mm diameter |
| Nitrogen Flow Rate | 0–10 L/min |
| Sample Capacity | 24-position (modular configuration) |
| Heating Power | 400 W |
| Display Resolution | 0.1 °C |
| Timer Range | 0–99 h 59 min |
| Max Operating Pressure | ≤0.1 MPa |
| Dimensions (W×D×H) | 280 × 220 × 500 mm |
| Brand | Hanuo |
|---|---|
| Origin | Shanghai, China |
| Model | HNWD-1000 |
| Heating Method | Water Bath |
| Temperature Range | Ambient +5°C to 99°C |
| Temperature Stability | ≤±1°C |
| Sample Capacity | 12 positions |
| Tube Diameter Compatibility | 10–29 mm |
| Gas Flow Rate | 15 L/min |
| Heating Power | 1000 W |
| Maximum Vertical Travel | 200 mm |
| Max Operating Pressure | 200 kPa |
| Display Resolution | ±0.1°C |
| Temp Uniformity (@60°C) | ≤±1°C |
| Warm-up Time (40°C → 99°C) | ≤30 min |
| Dimensions (L×W×H) | 390×300×850 mm |
| Weight | 10 kg |
| Brand | Hanuo |
|---|---|
| Origin | Shanghai, China |
| Model | RE-2000A |
| Capacity | 2 L |
| Ultimate Vacuum | 0.098 MPa (≈740 mmHg) |
| Rotational Speed | 20–200 rpm (digital display, stepless adjustment) |
| Bath Temperature Range | Ambient to 90 °C (digital PID control, water bath) |
| Heating Bath | PTFE-coated stainless steel, 1.4 kW |
| Overall Power | 1.5 kW |
| Voltage | 220 V AC |
| Condenser | Vertical double-loop reflux condenser with ground-glass joints, large-diameter vapor duct |
| Lift Mechanism | Rocker-type mechanical升降 (0–150 mm vertical travel) |
| Flask Mounting | Ring-nut coupling (clockwise auto-lock, counterclockwise quick-release) |
| Brand | Hanuo |
|---|---|
| Origin | Shanghai, China |
| Model | RE-3000A |
| Evaporation Flask Capacity | 3 L |
| Ultimate Vacuum | 0.098 MPa (≈740 mmHg) |
| Rotational Speed Range | 20–200 rpm (digital display, stepless adjustment) |
| Bath Temperature Control Range | Ambient to 90 °C (PID-controlled, digital readout) |
| Heating Bath | PTFE-coated stainless steel, 1.4 kW |
| Condenser | Vertical double-surface reflux condenser with ground-glass joints, large-diameter vapor duct |
| Cooling Surface Area | 0.11 m² |
| Total Power Consumption | 1.5 kW |
| Voltage | 220 V AC |
| Brand | Hanuo |
|---|---|
| Origin | Shanghai, China |
| Model | RE-5000A |
| Capacity | 5 L |
| Rotation Speed Range | 0–110 rpm |
| Heating Temperature Range (Water Bath) | RT to 98 °C |
| Cooling System | Vertical high-density dual-coil condenser |
| Collection Flask Capacity | 3 L |
| Power Consumption | 2120 W |
| Dimensions (W×D×H) | 600 × 400 × 850 mm |
| Lift Mechanism | Foot-pedal toggle switch + motorized rapid lift |
| Flask Joint | Standard ground-glass ball joint (ISO 297 or KF25 equivalent) |
| Speed Display | Digital LED |
| Temperature Control Accuracy | ±1 °C (typical for water-bath systems) |
| Vacuum Compatibility | Designed for use with external vacuum pumps (vacuum degree dependent on pump & system integrity) |
| Brand | Hanuo |
|---|---|
| Origin | Shanghai, China |
| Model | RE-5203A |
| Rotational Speed Range | 0–150 rpm |
| Heating Temperature Range | RT to 100 °C |
| Ultimate Vacuum | 0.098 MPa (≈740 mmHg) |
| Evaporation Flask Capacity | 3 L |
| Collection Flask Capacity | 2 L |
| Cooling System | Vertical high-density dual-coil condenser |
| Lifting Mechanism | Motorized tilting-type lift |
| Total Power Consumption | 1630 W |
| Heating Control Accuracy | ±0 °C (indicative of basic on/off or proportional control without digital PID specification) |
| Brand | Hanuo |
|---|---|
| Origin | Shanghai, China |
| Model | RE-5205 |
| Rotational Speed Range | 0–130 rpm |
| Vacuum Level | ≤ 0.098 MPa (≤ 740 mmHg) |
| Heating Bath Temperature Range | Ambient to 98 °C |
| Temperature Control Accuracy | ±0.5 °C |
| Evaporation Flask Capacity | 5 L |
| Collection Flask Capacity | 3 L |
| Cooling Surface Area | 0.11 m² |
| Heating Bath Lift Mechanism | Manual Handwheel |
| Condenser Type | Vertical dual-coil serpentine with standard taper joints (29/32) |
| Total Power Consumption | 2100 W |
| Brand | Hanuo |
|---|---|
| Model | RE-5210A |
| Rotational Speed Range | 20–110 rpm (digital display, frequency-controlled) |
| Heating Bath Temperature Range | RT to 98 °C (water bath) |
| Rotary Flask Capacity | 10 L |
| Collection Flask Capacity | 5 L (standard taper joint) |
| Cooling System | Vertical high-density dual-coil condenser |
| Power Consumption | 3180 W |
| Dimensions (W×D×H) | 950 × 500 × 1600 mm |
| Lift Mechanism | Motorized vertical lift |
| Brand | Hanuo |
|---|---|
| Origin | Shanghai, China |
| Model | RE-5220A |
| Rotational Capacity | 20 L |
| Ultimate Vacuum | 0.098 MPa |
| Rotation Speed | 20–110 rpm (frequency-controlled, digital display) |
| Heating Bath Temperature Range | RT to 98 °C (water bath) |
| Temperature Control Accuracy | ±0.1 °C |
| Condenser Type | Vertical dual-coil high-density serpentine glass condenser |
| Collection Flask Capacity | 10 L (standard ground-glass joint) |
| Lift Mechanism | Motorized vertical lift |
| Power Consumption | 5240 W |
| Dimensions (W×D×H) | 1100 × 650 × 1900 mm |
| Brand | Hanuo |
|---|---|
| Origin | Shanghai, China |
| Model | RE-52A |
| Capacity | 2 L |
| Ultimate Vacuum | 0.098 MPa (≈740 mmHg) |
| Rotation Speed | 0–120 rpm |
| Bath Temperature Range | Room Temperature to 100 °C |
| Temperature Control Accuracy | ±1 °C (typical for analog thermostatic control) |
| Cooling Surface Area | 0.11 m² |
| Condenser Type | Vertical dual-spiral coil with integrated small-capacity cold trap |
| Lift Mechanism | Manual screw-type vertical lift |
| Total Power Consumption | 1060 W |
| Brand | Hanuo |
|---|---|
| Origin | Shanghai, China |
| Model | RE-52A |
| Rotational Speed | 0–120 rpm |
| Heating Bath Temperature Range | RT to 100 °C |
| Vacuum Capability | ≤ 0.098 MPa (≈ 74 Torr) |
| Evaporation Flask Capacity | 2 L |
| Collection Flask Capacity | 2 L |
| Cooling Surface Area | 0.11 m² |
| Heating Control Accuracy | ±1 °C over full range |
| Lift Mechanism | Manual screw-type vertical lift |
| Condenser Type | Vertical dual-spiral coil with integrated small-capacity cold trap |
| Total Power Consumption | 1060 W |
| Brand | Hanuo |
|---|---|
| Origin | Shanghai, China |
| Model | RE-52AA |
| Rotational Speed Range | 0–120 rpm |
| Heating Bath Temperature Range | Ambient to 100 °C |
| Maximum Vacuum Level | 0.098 MPa (≈740 mmHg) |
| Evaporation Flask Capacity | 2 L |
| Collection Flask Capacity | 2 L |
| Cooling System | Vertical dual-coil condenser with large-diameter bore |
| Lift Mechanism | Motorized vertical lift |
| Total Power Consumption | 1100 W |
| Heating Temperature Control Accuracy | ±1 °C (typical for analog-controlled bath systems) |
| Condenser Surface Area | Not specified — designed for standard solvent recovery under moderate vacuum and flow conditions |
| Brand | Hanuo |
|---|---|
| Origin | Shanghai, China |
| Model | RE-52CS |
| Capacity | 2 L |
| Ultimate Vacuum | 0.098 MPa (≈740 mmHg) |
| Rotation Speed | 0–150 rpm |
| Temperature Control Range | Ambient to 100 °C |
| Heating Bath Temperature Accuracy | ±1 °C (typical for analog-controlled water/oil bath) |
| Condenser Cooling Area | 0.11 m² |
| Condenser Type | Vertical dual-spiral coil |
| Lift Mechanism | Manual hand-lift vertical adjustment |
| Total Power Consumption | 60 W |
| Collection Flask Capacity | 2 L |
| Brand | Heidolph |
|---|---|
| Origin | Germany |
| Model | Hei-VAP Core HL G3 / ML G3 |
| Capacity | 50–5000 mL |
| Ultimate Vacuum | 2 mbar |
| Rotation Speed | 10–280 rpm |
| Bath Temperature Range | 20–210 °C |
| Temperature Control Accuracy | ±1 °C |
| Condenser Cooling Surface Area | 2,200 cm² |
| Brand | Heidolph |
|---|---|
| Origin | Germany |
| Model | Hei-VAP Expert Control ML G3 |
| Capacity | 50–5000 mL |
| Ultimate Vacuum | 2 mbar |
| Rotation Speed | 10–280 rpm |
| Bath Temperature Range | 20–210 °C |
| Temperature Control Accuracy | ±1 °C |
| Condenser Surface Area | 2,200 cm² |
| Heating Power | 1300 W |
| IP Rating (Electrical Interface) | IP67 |
| Safety Features | Overtemperature cutoff (>5 °C above setpoint), dual-layer AISI 316L stainless steel bath, PTFE/FKM sealing system |
| Brand | Heidolph |
|---|---|
| Origin | Germany |
| Model | Hei-VAP Expert Control |
| Capacity | 5 L |
| Rotational Speed Range | 10–280 rpm |
| Condenser Surface Area | 1,400 cm² |
| Integrated Vacuum Controller | Yes |
| Dynamic AUTOaccurate (DAA) Distillation Mode | Yes |
| Heating Power | 1,300 W |
| Temperature Control | PT1000 sensor with ±0.5 °C accuracy |
| Display | 5″ color LCD graphical touchscreen |
| IP Rating | IP42 (electronics), IP67 (cable connectors) |
| Lift Mechanism | Manual or motorized |
| Safety Features | Dry-run protection, overheat cutoff (>5 °C above setpoint), safety film-coated glassware, integrated condensate detection, emergency stop via standby button |
| Brand | Heidolph |
|---|---|
| Origin | Germany |
| Model | Hei-VAP Industrial |
| Capacity | 6–20 L |
| Ultimate Vacuum | 1 mbar |
| Rotation Speed | 6–160 rpm |
| Bath Temperature Range | 20–180 °C |
| Temperature Control Accuracy | ±1 °C |
| Condenser Cooling Area | 1.2 m² |
| Heating Power | 4000 W |
| Display | 7-inch Touchscreen |
| Lift Mechanism | Motorized |
| Safety Features | Integrated Overtemperature Protection (cut-off at +5 °C above setpoint), Auto-refill System, Emergency Stop Button, IP42-rated Control Panel, Full PMMA & Metal Safety Enclosures |
| Programmability | 250 user-defined programs, up to 999 gradient steps per program |
| Compliance | Designed for GLP/GMP environments |
| Brand | Heidolph |
|---|---|
| Origin | Germany |
| Model | Hei-VAP Ultimate Control |
| Capacity | 5 L |
| Rotational Speed | 10–280 rpm |
| Condenser Surface Area | 1,400 cm² |
| Heating Power | 1,300 W |
| Integrated Vacuum Controller | Yes |
| Dynamic AUTOaccurate (DAA) Mode | Yes |
| Display | 7" Color LCD Graphical Touchscreen |
| IP Rating | IP42 (Electronics), IP67 (Cable Interface) |
| Safety Features | PT1000 Overtemperature Sensor, Dry-run Protection, Motorized Lift (Optional), Safety Film-Coated Glassware, Integrated Hei-CHILL Cooling Circulator Control |
| Compliance | CE, RoHS, ISO 9001 Manufacturing, GLP-Compatible Operation Log |
| Brand | Heidolph |
|---|---|
| Origin | Germany |
| Model | Hei-VAP Ultimate |
| Capacity | 5 L |
| Rotational Speed Range | 10 – 280 rpm |
| Condenser Surface Area | 1,400 cm² |
| Heating Power | 1,300 W |
| Display | 7" Color LCD Graphic Touchscreen |
| Protection Rating | IP42 (electronics), IP67 (cable interface) |
| Safety Features | PT1000 overtemperature sensor, dry-run protection, safety film-coated glassware, integrated splash guard, IQ/OQ documentation support |
| Control Interfaces | USB, microSD, LAN/RS232 (Lab 4.0 compliant) |
| Optional Upgrades | Hei-VAP Ultimate Control (vacuum + Hei-CHILL integration), AUTOaccurate vacuum probe, XL condenser (2,200 cm²), steam temperature sensor |
| Brand | Tianjin HengAo |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HAC-24A |
| Heating Method | Water Bath |
| Temperature Range | Ambient +5°C to 99.9°C |
| Temperature Stability | ±0.1°C (typical), ±0.5°C (max) |
| Sample Capacity | 24 × 40 mL / 12 × 100 mL / 6 × 200 mL |
| Gas Flow Rate | 0–15 L/min |
| Heating Power | 800 W |
| Brand | Tianjin HengAo |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | HGC-12A |
| Heating Method | Dry-block heating |
| Temperature Range | Ambient to 150 °C |
| Temperature Stability | ±1 °C |
| Sample Tube Diameter Compatibility | 10–20 mm |
| Gas Flow Rate | 0–5 L/min |
| Sample Capacity | 12 positions |
| Heating Power | 150 W |
| Dimensions (W×D×H) | 340 × 230 × 380 mm |
| Power Supply | 220 V, 50 Hz |
| Maximum Gas Inlet Pressure | 200 kPa |
| Control System | PID temperature regulation with overheat protection and PTC heating element |
| Material Contacting Solvents | 316 stainless steel, anodized aluminum, or plastic-coated surfaces |
| Adjustable Gas Distribution Plate | Height and orientation adjustable |
| Nitrogen Needle Configuration | Modular and individually operable |
| Brand | Tianjin HengAo |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Automated Quantitative Concentrator |
| Temperature Range | Ambient +5 °C to 100 °C |
| Temperature Control Accuracy | ±0.5 °C |
| Sample Capacity per Position | 150 mL |
| Throughput | 12 Samples Simultaneously |
| Endpoint Detection | Fixed Volume (0.5 mL or 1 mL) Automatic Termination |
| Vacuum & Heating & Orbital Shaking | Integrated Simultaneous Operation |
| Solvent Recovery | Condensate Collection Enabled |
| Cooling Water Circulator & Vacuum Controller | Optional Accessories |
| Brand | Tianjin HengAo |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Vacuum Centrifugal Concentrator |
| Temperature Range | Ambient +5°C to 100°C |
| Temperature Control Accuracy | ±0.5°C |
| Sample Capacity per Position | 30 mL (24-position configuration) |
| Total Throughput Capacity | 720 mL (24 × 30 mL) |
| Position Designation | “HPE-24” indicates 24 sample positions |
| Quantitative Mode Option | Available with “A” suffix for endpoint volume control (e.g., 0.5 mL or 1.0 mL stop points) |
| Brand | Tianjin HengAo |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Automated Quantitative Concentrator |
| Temperature Range | Ambient +5°C to 100°C |
| Temperature Control Accuracy | ±0.5°C |
| Sample Capacity per Position | 200 mL |
| Maximum Throughput | 24 Samples Simultaneously |
| Evaporation Mode | Simultaneous Vacuum Reduction, Heated Water Bath, and Orbital Vortex Agitation |
| Solvent Recovery Efficiency | High |
| Footprint | Benchtop, Ventilation Hood-Compatible |