- All
- Favorite
- Popular
- Most rated
| Brand | ULUPURE |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Models | UPH-I/II/III-10/20/30T |
| Pure Water Grade | GB/T 6682–2008 Grade I (Type I) |
| Resistivity | 18.2 MΩ·cm @ 25 °C |
| Heavy Metals & Soluble Silica | ≤0.1 ppb |
| Total Organic Carbon (TOC) | <10 ppb |
| Microbial Count | <1 CFU/mL |
| Endotoxin | <0.01 EU/mL |
| Particles (>0.1 µm) | <1 particle/mL |
| Brand | ULUPURE |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ULPTY |
| Pricing | Upon Request |
| Water Grade | ASTM Type I / GB/T 6682–2008 Grade I |
| Heavy Metals & Soluble Silica | < 0.1 ppb |
| Particles (>0.1 µm) | < 1 particle/mL |
| Brand | ULUPURE |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ULPTX-2000DRO |
| Input Water Requirement | Complies with GB 5749 (Drinking Water Hygiene Standard) |
| Product Water Quality | Meets YY 0572-2015 (Water for Hemodialysis and Related Therapies) |
| Power Supply | 3N~380 V, 50 Hz |
| Bacterial Count | <100 CFU/mL |
| Endotoxin Level | <0.25 EU/mL |
| Production Capacity | >2000 L/h (@25°C) |
| Salt Rejection Rate | >95% |
| Recovery Rate | ≥70% |
| Brand | ULUPURE |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | UPT-LG |
| Pure Water Grade | Type I (GB/T 6682-2008) |
| Resistivity | ≥17 MΩ·cm |
| Power Supply | AC 220 V, 50 Hz |
| Power Consumption | 2.0–3.5 kW |
| Feed Water | Municipal tap water (TDS < 200 ppm, residual chlorine ≤ 0.05 mg/L, pressure 1.5–5.0 bar, temperature 5–45 °C) |
| Production Capacity | 150–500 L/h (configurable) |
| System Architecture | Pre-treatment + Single/Dual-stage RO + Ultra-purification |
| Storage Tank | 250 L or 500 L PE tank (model-dependent) |
| Dimensions (W×D×H) | 700 × 1063 × 1600 mm |
| Footprint | ~2.5 m² |
| Weight | 200–500 kg |
| Compliance | GB/T 6682-2008, GB 33087, GB 11446.1-2013 |
| Optional Upgrades | Stainless steel cabinet (suffix “B”), EDI module (suffix “E”), 304 stainless steel sterile tank, UV photooxidation (185/254 nm), PLC + HMI control, leak detection, remote monitoring software |
| Brand | ULUPURE |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | UPE |
| Pricing | Upon Request |
| Purified Water Grade | ASTM Type I / ISO 3696 Grade 1 |
| Resistivity | 18.2 MΩ·cm @ 25 °C |
| Heavy Metals & Soluble Silica | ≤0.1 ppb |
| Particles (>0.1 µm) | ≤1 particle/mL |
| Microbial Count | ≤1 CFU/mL |
| RNase | <0.5 pg/mL |
| DNase | <5 pg/mL |
| TOC (with optional dual-wavelength UV) | <10 ppb |
| Endotoxin (with optional 3000 Da UF) | <0.001 EU/mL |
| RO Feed Water Requirement | TDS < 200 ppm, Pressure 0.10–0.40 MPa, Temp 5–45 °C |
| Production Rate | 10 or 20 L/h |
| Flow Rate | 1.0–1.5 L/min |
| Dimensions (W×D×H) | 375 × 505 × 615 mm |
| Weight | ~35 kg |
| Power Supply | AC 220 V, 50 Hz (200–410 W) |
| Brand | ULUPURE |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Classification | Domestic (China) |
| Model | ULPQX |
| Pricing | Upon Request |
| Purified Water Grade | ASTM Type III / ISO 3696 Grade 3 |
| Conductivity | ≤5 µS/cm (for double-pass RO configuration, at 25 °C) |
| Brand | ULUPURE |
|---|---|
| Model | UPHD |
| Origin | Sichuan, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Category | Domestic (China) |
| Pricing | Upon Request |
| Brand | ULUPURE |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ULPHW |
| Pricing | Upon Request |
| Purified Water Grade | Type I (ASTM D1193-20) |
| Resistivity | 18.2 MΩ·cm @ 25 °C |
| Total Organic Carbon (TOC) | ≤3 ppb |
| Microbial Count | ≤1 CFU/mL |
| Endotoxin | ≤0.001 EU/mL |
| Particles (>0.1 µm) | ≤1 particle/mL |
| Brand | ULUPURE |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ULPZY-2xT |
| Water Grade Output | Type I Ultra-Pure Water (GB/T 6682–2008) |
| Rated Flow Rates | 8–20 m³/h (configurable variants: 2×4T, 2×6T, 2×8T, 2×10T) |
| Power Consumption | 25–50 kW |
| Footprint | 50–100 m² |
| Compliance | GB/T 6682–2008, WS 310–2016, WS 507–2016, GB 28234–2020, CJ 94–2005, GB/T 1756–2018 |
| Brand | ULUPURE |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Classification | Domestic |
| Model | ULPS |
| Pricing | Upon Request |
| Feed Water Quality | Municipal Tap Water (TDS < 500 ppm, Residual Chlorine ≤ 0.05 mg/L, Pressure 2–5 kg/cm², Temp 5–45 °C) |
| Product Water Grade | GB/T 6682–2008 Grade I / ASTM D1193–2023 Type I / ISO 3696:1995 Grade 1 / NCCLS EP21-A / WS/T 574–2018 Class A |
| Heavy Metals & Soluble Silica | < 0.1 ppb |
| Total Organic Carbon (TOC) | < 10 ppb |
| Particles (>0.1 µm) | < 1 particle/mL |
| Resistivity | ≥ 18.2 MΩ·cm (25 °C) |
| Conductivity | ≤ 0.055 µS/cm |
| Bacterial Count | < 0.1 CFU/mL |
| Flow Rate Options | 120 / 200 / 250 / 300 / 500 L/h |
| Standard Storage Tank | 250 L (for 120–250 L/h models) |
| Power Consumption | 1.8–2.1 kW |
| Dimensions (L×W×H) | 1500×700×1600 mm (120–250 L/h) |
| Weight | 200–2000 kg |
| Materials of Construction | 304 Stainless Steel Wetted Parts, Imported RO Membranes, International Brand Solenoid Valves & Fittings |
| Control Architecture | PLC-Based Automation with Optional HMI Touchscreen Interface |
| Brand | ULUPURE |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | UPL |
| Pricing | Upon Request |
| Purified Water Grade | Type I (ASTM D1193-20) |
| Resistivity | 18.2 MΩ·cm @ 25 °C |
| Heavy Metals & Soluble Silica | ≤0.1 ppb |
| Total Organic Carbon (TOC) | ≤5 ppb |
| Particles (>0.1 µm) | ≤1 particle/mL |
| Brand | ULUPURE |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Direct Manufacturer |
| Product Line | Domestic |
| Model | UPT-II-10 / UPT-II-20 / UPT-II-30T |
| Pure Water Grade | ASTM Type II (RO Water) & ISO 3696 / GB/T 6682-2008 Type I (Ultra-Pure Water) |
| Resistivity | 18.2 MΩ·cm @ 25 °C (online monitoring) |
| Heavy Metals & Soluble Silica | < 0.1 ppb |
| Microbial Count | ≤ 1 CFU/mL |
| Endotoxin | ≤ 0.001 EU/mL |
| Particles (>0.1 µm) | ≤ 1 particle/mL |
| UV Wavelength | 254 nm (low-pressure mercury lamp, not 270 nm — corrected per IEC 60601-2-62 & ISO 15197 standards) |
| Final Filtration | 0.2 µm hydrophilic PES membrane |
| Feed Water Requirements | TDS < 200 ppm, Pressure 0.10–0.40 MPa, Temp 5–45 °C |
| Flow Rate (UP outlet) | 2.2 L/min (at full tank) |
| Production Capacity | 10 / 20 / 30 L/h (RO stage, rated at 25 °C) |
| Dimensions (W×D×H) | 325 × 430 × 515 mm |
| Weight | ~25 kg |
| Power Supply | AC 220 V, 50 Hz, 96 W |
| Integrated Reservoir | 15 L pressurized stainless-steel tank |
| Compliance | Meets GB/T 6682-2008, ISO 3696:1987, ASTM D1193-20, USP <1231>, CLSI EP21-A |
| Brand | ULUPURE |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | UPS |
| Pricing | Upon Request |
| Purified Water Grade | ASTM Type I / ISO 3696 Grade 1 / GB/T 6682-2008 Class I |
| Resistivity | ≥18.0 MΩ·cm (online monitoring) |
| Heavy Metals & Soluble Silica | <0.1 ppb |
| Total Organic Carbon (TOC) | <10 ppb |
| Microbial Count | ≤1 CFU/mL |
| Endotoxin Level | ≤0.001 EU/mL |
| Particles (>0.1 µm) | <1 particle/mL |
| Conductivity (Purified Water) | ≤0.1 µS/cm (online) |
| Flow Rate Options | 20/40/60/80/100 L/h |
| Feed Water Requirements | Municipal tap water (TDS <400 ppm, free chlorine ≤0.05 mg/L, pressure 2–5 kg/cm², temperature 5–45 °C) |
| Power Consumption | 100 W (20–40 L models), 150 W (60 L), 200 W (80–100 L) |
| Dimensions (H×W×D) | 430×520×1050 mm (20–40 L), 440×520×1300 mm (60 L), 1350×500×740 mm (80–100 L) |
| Weight | 80 kg (20–40 L), 100 kg (60 L), 135 kg (80–100 L) |
| Integrated Storage Tank | 40 L (standard for 20–60 L systems), 100 L (standard for 80–100 L systems) |
| Brand | ULUPURE |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | UPT-L |
| Pricing | Upon Request |
| Feedwater Quality | Municipal Tap Water (TDS < 200 ppm, Residual Chlorine ≤ 0.05 mg/L, Pressure 1.5–5 bar, Temp 5–45 °C) |
| Purification Stages | Single-Stage RO + Ultra-Purification Module |
| Resistivity | ≥17.00 MΩ·cm @ 25 °C (Online Monitoring) |
| Conductivity | ≤0.059 µS/cm @ 25 °C (Calculated Equivalent) |
| Flow Rate Options | 150–1000 L/h |
| Standard Tank Capacity | 250–1000 L (Configurable) |
| Power Supply | AC 220 V / 380 V, 50 Hz |
| Rated Power | ≥2.5 kW (Configuration-Dependent) |
| Brand | ULUPURE |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Classification | Domestic (China) |
| Model | UPR-I/II/III-10/20T |
| Pure Water Grade | GB/T 6682–2008 Grade III (RO) & Grade I (UP) |
| Resistivity | 18.2 MΩ·cm @ 25 °C |
| Heavy Metals & Soluble Silica | ≤0.1 ppb |
| Total Organic Carbon (TOC) | ≤8 ppb |
| Microbial Count | <1 CFU/mL |
| Endotoxin | <0.01 EU/mL |
| Particles (>0.1 µm) | <1 particle/mL |
| UV Wavelengths | 185 nm & 254 nm (dual-band photooxidation), 270 nm (germicidal) |
| UF Membrane Cutoff | 3000 Da |
| Final Filtration | 0.2 µm hydrophilic PES membrane |
| Dimensions (W×D×H) | 375 × 505 × 615 mm |
| Weight | ~30 kg |
| Power Supply | AC 220 V, 50 Hz (170–200 W) |
| Feed Water Requirements | TDS < 1000 ppm, Pressure 0.10–0.40 MPa, Temperature 5–45 °C |
| RO Output Conductivity | 1–5 µS/cm |
| Flow Rate | 10 or 20 L/h (at 25 °C) |
| Brand | ULUPURE |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | UPTL |
| Pricing | Upon Request |
| Purified Water Grade | ASTM Type II (RO Water) |
| Resistivity | 17–18.2 MΩ·cm @ 25 °C |
| Heavy Metals & Soluble Silica | < 0.1 ppb |
| Particles (> 0.1 µm) | ≤ 1 particle/mL |
| UV Wavelength | 254 nm (Low-pressure mercury lamp) |
| Feed Water Requirements | TDS ≤ 200 ppm (UPTL-I), 1000 ppm (UPTL-II) |
| Pressure | 0.30–0.40 MPa |
| Temp | 5–45 °C |
| RO Output Conductivity | ≤ 2% of feed conductivity or 1–5 µS/cm |
| UP Output Microbial Count | ≤ 1 CFU/mL |
| Dimensions (UPTL-I) | 530 W × 575 D × 1070 H mm |
| Weight (20–40 L config) | ~38 kg |
| Power Supply | AC 220 V, 50 Hz (75–350 W) |
| Brand | ULUPURE |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | UPL-S |
| Pricing | Available Upon Request |
| Purified Water Grade | Type I (ASTM D1193-20) |
| Resistivity | 18.25 MΩ·cm at 25 °C |
| Heavy Metals & Soluble Silica | < 0.1 ppb |
| Total Organic Carbon (TOC) | < 10 ppb |
| Microbial Count | < 1 CFU/mL |
| Endotoxin Level | < 0.001 EU/mL |
| Particles (>0.1 µm) | < 1 particle/mL |
| RO Permeate Conductivity | ≤ 1 µS/cm |
| Flow Rate (Instantaneous) | ≥ 1.5 L/min |
| Production Capacity | 20–120 L/h (model-dependent) |
| Storage Tank Options | 50 / 100 / 200 L sterile tanks |
| UV Wavelengths | 185 nm & 254 nm |
| UF Membrane MWCO | 5000 Da |
| Operating Input | AC 220 V, 50 Hz (150–300 W) |
| Feed Water Requirements | Conductivity ≤ 400 µS/cm, Temp. 5–45 °C, Pressure 0.30–0.40 MPa |
| Dimensions (W×D×H) | 500 × 630 × 1100 mm |
| Weight | 60–100 kg |
| Brand | ULUPURE |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | UPT-II-LB-G / UPT-II-LEB-G |
| Purified Water Grade | Pharmacopeial Grade (Chinese Pharmacopoeia 2020, YY/T 1244–2014) |
| Resistivity | ≥10 MΩ·cm @ 25 °C |
| Conductivity | ≤0.1 µS/cm @ 25 °C |
| Production Capacity | 250 / 500 / 1000 L/h |
| Feed Water | Municipal tap water (TDS < 200 ppm, residual chlorine ≤ 0.05 mg/L, pressure 1.5–5 bar, temperature 5–45 °C) |
| Pretreatment | Multi-media filter + activated carbon filter + softener with regeneration |
| Core Process | Dual-stage reverse osmosis (RO) ± optional EDI module |
| Sterilization Options | UV lamp (254 nm), ozone injection, or hot water (80 °C) / pure steam sanitization |
| Storage Tank | Electropolished 316L stainless steel, ASME BPVC Section VIII compliant, welded with orbital TIG, passivated and certified |
| Control System | PLC-based HMI with touch interface, real-time parameter logging, alarm history, and audit trail capability |
| Brand | ULUPURE |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ULPS Custom-Built |
| Pricing | Upon Request |
| Purified Water Grade | Type I (ASTM D1193-20) |
| Resistivity | ≥18.0 MΩ·cm (at 25°C) |
| Heavy Metals & Soluble Silica | <0.1 ppb |
| Total Organic Carbon (TOC) | <10 ppb |
| Microbial Count | ≤1 CFU/mL |
| Endotoxin Level | ≤0.001 EU/mL |
| Particles (>0.1 µm) | <1 particle/mL |
Show next