- All
- Favorite
- Popular
- Most rated
| Brand | Jiayuan |
|---|---|
| Origin | Beijing, China |
| Model | DMT-2500 |
| Speed Range | 500–2500 rpm |
| Speed Accuracy | ±50 rpm (at 2500 rpm) |
| Orbital Diameter | 4 mm |
| Display | LED |
| Operating Modes | Touch-Start & Timer |
| Timer Range | 1 s – 9999 min |
| Max Load Capacity | 5 kg |
| Top Plate Dimensions | 311 × 184 mm |
| Overall Dimensions | 426 × 250 × 480 mm |
| Net Weight | 21.5 kg |
| Power Supply | 100–230 V, 50/60 Hz |
| Power Consumption | 60 W |
| Standard Accessories | 12 mm foam tube rack + tray pad |
| Optional Foam Racks | DMT-A (50×Φ10 mm), DMT-B (50×Φ12 mm), DMT-C (50×Φ13 mm), DMT-D (50×Φ16 mm, fits 15 mL centrifuge tubes), DMT-E (15×Φ25 mm), DMT-F (15×Φ29 mm, fits 50 mL centrifuge tubes), DMT-H (replaceable upper & lower tray pads) |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RW 20 digital |
| Max. Viscosity | 10,000 mPa·s |
| Max. Volume (Water) | 20 L |
| Speed Range | 60–2000 rpm |
| Motor Input/Output Power | 70 / 35 W |
| Shaft Output Power | 26 W |
| Duty Cycle | 100% |
| Max. Torque at 100 rpm | 150 N·cm |
| Chuck Capacity | 0.5–10 mm |
| Support Rod | Ø13 × 160 mm |
| Dimensions (W×D×H) | 88 × 212 × 294 mm |
| Weight | 3.1 kg |
| Protection Class | IP20 (DIN EN 60529) |
| Brand | Jiayuan |
|---|---|
| Model | MIX-3000 |
| Origin | Beijing, China |
| Type | Benchtop Vortex Mixer with Adjustable Speed & Dual-Mode Operation (Orbital Shaking + Vortexing) |
| Speed Range | 300–3000 rpm (10-rpm increments) |
| Vortex Mode Speed | 3500 rpm |
| Orbit Diameter | 1.5 mm (3 mm peak-to-peak amplitude) |
| Display | LED digital speed & time readout |
| Timer Range | 1 s to 99 h 59 min, continuous operation mode available |
| Noise Level | <52 dB(A) |
| Dimensions (W×D×H) | 270 × 196 × 170 mm |
| Weight | 4.5 kg |
| Power Supply | AC 100–230 V, 50–60 Hz |
| Power Consumption | 45 W |
| Compliance | CE-marked for laboratory use |
| Brand | YUHUA |
|---|---|
| Origin | Henan, China |
| Model | DF-101S |
| Heating Method | Radiant integrated bath heating |
| Max. Operating Temperature | ≤300 °C (oil bath), ≤100 °C (water bath), dry heating supported |
| Stirring Speed Range | 0–2400 rpm |
| Motor Type | DC high-torque motor |
| Heating Element | Stainless steel sheathed resistive tube, aged at 800 °C for 24 h |
| Insulation Resistance | >1000 MΩ |
| Stirring Coupling | NdFeB permanent magnet rotor |
| Bath Compatibility | Water bath, oil bath, dry heating |
| Thermal Isolation | Aluminum heat-dissipating partition between heating chamber and electrical compartment |
| Compliance | Designed per GB/T 25117–2010 (Laboratory Equipment – Safety Requirements) |
| Brand | SCILOGEX |
|---|---|
| Origin | USA |
| Model | MS-H-Pro+ |
| Voltage | 220 VAC |
| Frequency | 50/60 Hz |
| Power (Total) | 550 W |
| Heating Power | 500 W |
| Max. Stirring Volume (H₂O) | 20 L |
| Max. Stir Bar Length | 80 mm |
| Speed Range | 100–1500 rpm |
| Speed Display Resolution | ±1 rpm |
| Heating Temp. Range | Ambient to 340 °C (1 °C step) |
| Heating Rate (1 L water) | 6 K/min |
| Plate Material | Ceramic-coated stainless steel |
| Plate Diameter | Ø135 mm |
| External PT1000 Sensor Support | Yes |
| PT1000 Temp. Control Accuracy | ±0.2 °C |
| Onboard Temp. Display Accuracy | ±0.1 °C |
| Heating Temp. Stability | ±1 °C |
| Max. Plate Safety Temp. | 360 °C |
| Motor Type | Brushless DC |
| Motor Output Power | 10 W |
| Dimensions (W×D×H) | 280 × 160 × 85 mm |
| Weight | 2.8 kg |
| Ambient Operating Temp. | 5–40 °C |
| Ambient Humidity Limit | ≤80 % RH |
| Protection Class | IP42 |
| RS232 Interface | Yes |
| Software | StirPC (free PC control & data logging) |
| Brand | MENTS |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | Vortex-D8 |
| Operating Modes | Continuous / Touch-Activated (Pulse) / Variable Speed Control |
| Speed Range | 200–3000 rpm (±15 rpm) |
| Oscillation Type | Circular Orbit |
| Orbit Diameter | 4.5 mm |
| Housing Material | Flame-Retardant ABS |
| Speed Display | High-Brightness LED Digital Display |
| Ambient Temperature Range | +5 to 40 °C |
| Input Power | DC 24 V, 18 W |
| Max Load Capacity | 1.5 kg |
| Noise Level at Max Speed | ≤45 dB(A) |
| Acceleration/Deceleration Time | ≤3 s |
| Timer Range | 1 s – 999 min (Count-Up / Count-Down) |
| Protection Rating | IP20 |
| Dimensions (W×D×H) | 198 × 138 × 67 mm |
| Weight | 4.1 kg |
| Motor Type | Brushless DC Permanent Magnet Motor with PWM Speed Control |
| Safety Features | Auto-Load Recognition, PPTC Self-Resetting Fuse, Over-Temperature Protection |
| Standard Accessories | 8S-1 through 8S-6 Tube & Plate Adapters |
| Brand | MENTS |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | Vortex-5 |
| Price | USD 280 (FOB) |
| Operating Mode | Optical Sensing / Continuous |
| Speed Range | 600–3000 rpm |
| Oscillation Pattern | Circular Orbit |
| Base Material | Zinc Alloy |
| Amplitude | 4 mm |
| Speed Indication | Analog Dial Scale |
| Ambient Temperature Range | 5–40 °C |
| Input Voltage | 100–240 V AC, 50–60 Hz |
| Motor Type | Permanent-Magnet DC Motor |
| Power Consumption | 60 W |
| Dimensions (W×D×H) | 165 × 130 × 140 mm |
| Net Weight | 3.0 kg |
| Gross Weight | 3.5 kg |
| Footing | Silicone Anti-Vibration Pads |
| Compatibility | Interchangeable Tube/Plate Adapters (1.5 mL, 2 mL, 15 mL, 50 mL tubes |
| Brand | SCILOGEX |
|---|---|
| Model | MS7-H550-Pro |
| Origin | USA |
| Heating Temperature Range | Ambient to 550 °C |
| Stirring Speed Range | 100–1500 rpm |
| Temperature Display Accuracy | ±0.1 °C |
| Temperature Control Accuracy (with PT1000 sensor) | ±0.2 °C |
| Temperature Increment | 1 °C |
| Heating Power | 1000 W |
| Max. Stirring Capacity | 20 L |
| Heating Rate (1 L water) | 6 K/min |
| Plate Dimensions | 7" × 7" (178 mm × 178 mm) |
| Plate Material | Ceramic-glass |
| Motor Type | Brushless DC |
| Display | Backlit LCD |
| Interface | RS232 serial port |
| Safety Features | Adjustable safety temperature limit (100–580 °C), residual heat warning (HOT indicator above 50 °C), auto-shutdown on overtemperature |
| Voltage | 110 V, 60 Hz, 450 W (stirring only) / 1000 W (heating + stirring) |
| Brand | Scientific Industries |
|---|---|
| Origin | USA |
| Model | Vortex-Genie 2 (G560E) |
| Speed Range | 600–3200 rpm (2700 rpm for 50 Hz models) |
| Operating Modes | Continuous, Touch-Activated, Variable-Speed Control |
| Motion Type | Circular Orbital Oscillation |
| Amplitude | 4.5 mm |
| Housing Material | Cast Iron with Rubber-Footed Base |
| Speed Indication | Analog Dial Scale |
| Power Input | 220–230 V, 50/60 Hz, 0.5 A |
| Dimensions | 165 × 122 × 165 mm |
| Weight | 4 kg |
| Certifications | UL, CSA, CE |
| Warranty | 1 Year |
| Standard Accessories | Single-Tube Cup, 3-inch Round Rubber Platform Pad |
| Brand | SCILOGEX |
|---|---|
| Origin | USA |
| Model | MS-H-S10 |
| Instrument Type | Heated Magnetic Stirrer |
| Max Total Stirring Volume (H₂O) | 4 L |
| Stirring Speed Range | 0–1100 rpm |
| Heating Temperature Range | Ambient to 120 °C |
| Number of Stirring Positions | 10 |
| Position Spacing | 90 mm |
| Max Stir Bar Length | 40 mm |
| Speed Uniformity per Position | ±5% |
| Power Supply | 220 VAC, 50/60 Hz |
| Total Power | 490 W |
| Heating Power | 470 W |
| Work Plate Material | Stainless Steel with Silicone Resin Coating |
| Work Plate Dimensions | 180 × 450 mm |
| Overall Dimensions | 182 × 552 × 65 mm |
| Weight | 3.2 kg |
| Environmental Operating Range | 5–40 °C, ≤80% RH |
| Ingress Protection | IP42 |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | T18 |
| Price | USD 2,100 (approx.) |
| Motor Input/Output Power | 500 / 300 W |
| Processing Volume (H₂O) | 1–1,500 mL |
| Max. Viscosity | 5,000 mPa·s |
| Speed Range (under load) | 3,500–24,000 rpm |
| Speed Control | Continuous (infinitely variable) |
| Speed Indication | Analog scale with digital display option via optional DZM tachometer interface |
| No-Load Noise Level | 73 dB(A) |
| Overload Protection | Electronic |
| Rotor Diameter/Length | 13 mm / 175 mm |
| Dimensions (W×D×H) | 65 × 80 × 240 mm |
| Weight | 1.6 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80 % RH (non-condensing) |
| Ingress Protection Rating | IP20 |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | T25 |
| Motor Input/Output Power | 500 / 300 W |
| Volume Range (H₂O) | 1–2,000 mL |
| Max. Viscosity | 5,000 mPa·s |
| Speed Range | 3,500–24,000 rpm |
| Speed Control | Continuous Variable |
| Speed Display | Digital |
| No-Load Noise Level | 73 dB(A) |
| Overload Protection | Yes |
| Rotor-Stator Tip Diameter/Length | 13 mm / 175 mm |
| Dimensions (W×D×H) | 65 × 80 × 240 mm |
| Weight | 1.6 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80 % |
| Ingress Protection Rating | IP20 |
| Brand | Scientific Industries |
|---|---|
| Origin | USA |
| Model | Vortex-Genie 2 (SI-0256) |
| Speed Range | 600–3000 rpm |
| Operating Modes | Continuous, Touch-Activated, Variable-Speed |
| Motion Type | Orbital (Circular) |
| Amplitude | 4 mm |
| Housing Material | Cast Iron |
| Speed Indication | Analog Dial Scale |
| Power Input | 230 V, 50 Hz, 0.5 A |
| Weight | 4 kg |
| Dimensions | 165 × 122 × 165 mm |
| Certifications | UL, CSA, CE |
| Warranty | 2 Years |
| Brand | SCILOGEX |
|---|---|
| Origin | USA |
| Model | MS-PB |
| Stirring Speed Range | 0–1500 rpm |
| Max. Stirring Volume (H₂O) | 3 L |
| Plate Diameter | Ø135 mm |
| Plate Material | Flame-Retardant Thermoplastic |
| Motor Type | Brushed DC Motor |
| Input Power | 5 W |
| Output Power | 3 W |
| Total Rated Power | 10 W |
| Voltage | 100–240 VAC, 50/60 Hz |
| IP Rating | IP42 |
| Dimensions (W×D×H) | 150 × 260 × 80 mm |
| Weight | 1.8 kg |
| Operating Ambient | 5–40 °C, ≤80% RH |
| Stir Bar Max. Length | 50 mm |
| Origin | Jiangsu, China |
|---|---|
| Manufacturer Type | Distributor |
| Country of Origin | China |
| Model | HJ-1 |
| Maximum Stirring Volume | 1000 mL |
| Speed Range | 0–2400 rpm |
| Power Supply | 220 V AC, 50 Hz |
| Dimensions (W × D × H) | 160 × 160 × 100 mm |
| Weight | 2.8 kg |
| Material | Stainless Steel Plate + ABS Housing |
| Compliance | CE, RoHS |
| Brand | Scientific Industries |
|---|---|
| Origin | USA |
| Model | Vortex-Genie 2T |
| Power Input | 230 V, 50 Hz, 0.5 A |
| Weight | 4 kg |
| Dimensions (W × D × H) | 165 mm × 122 mm × 165 mm |
| Timer Range (Touch Mode) | 1–60 s |
| Timer Range (Continuous Mode) | 1–60 min or continuous operation |
| Certifications | UL, CSA, CE |
| Housing | Die-cast metal with rubber feet |
| Standard Accessories | Base unit, standard rubber cup, 3-inch flat platform pad |
| Warranty | 2 years |
| Brand | SciLogex |
|---|---|
| Model | MS-H-S |
| Origin | USA |
| Type | Heating Magnetic Stirrer |
| Power Supply | 220 VAC, 50/60 Hz |
| Max. Stirring Volume (H₂O) | 20 L |
| Speed Range | 0–1500 rpm |
| Heating Power | 500 W |
| Max. Heating Temperature | 340 °C |
| Safety Cut-off Temp | 350 °C |
| Workplate Material | Enamel or Stainless Steel |
| Workplate Diameter | φ135 mm |
| Motor | Brushless DC |
| IP Rating | IP42 |
| Dimensions (W×D×H) | 280 × 160 × 85 mm |
| Weight | 2.8 kg |
| Brand | Scilogex |
|---|---|
| Model | MS-H280-Pro |
| Origin | USA |
| Heating Temperature Range | Ambient to 280 °C |
| Temperature Control Accuracy | ±1 °C (<100 °C), ±1% (>100 °C) |
| External PT1000 Sensor Compatibility | Yes (±0.5 °C) |
| Stirring Speed Range | 100–1500 rpm |
| Max. Stirring Volume (H₂O) | 3 L |
| Plate Diameter | φ135 mm |
| Plate Material | Stainless Steel with Ceramic Coating |
| Motor Type | DC Motor |
| Input Power | 515 W |
| Heating Power | 500 W |
| Safety Cut-off Temperature | 320 °C |
| Residual Heat Warning Threshold | 50 °C |
| IP Rating | IP21 |
| Dimensions (W×D×H) | 150 × 260 × 80 mm |
| Weight | 1.8 kg |
| Voltage | 200–240 VAC, 50/60 Hz |
| [Brand | Scientific Industries |
|---|---|
| Origin | USA |
| Model | Vortex-Genie 2 (SI-0246) |
| Speed Range | 600–3200 rpm |
| Operating Modes | Continuous, Touch-Activated, Variable-Speed |
| Motion Type | Circular Orbital |
| Amplitude | 4.5 mm |
| Housing Material | Cast Iron |
| Speed Indication | Analog Dial Scale |
| Power Input | 230 V, 50 Hz, 0.5 A |
| Weight | 4 kg |
| Certifications | UL, CSA, CE |
| Warranty | 2 Years] |
| Origin | Jiangsu, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | JJ-1 |
| Power Options | 25 W to 300 W |
| Speed Range | 0–3000 rpm (infinitely variable) |
| Timer Range | 0–120 min |
| Display | Analog (standard) |
| Compliance | CE-marked per EN 61000-6-3 & EN 61000-6-2 |
| Brand | SCILOGEX |
|---|---|
| Model | MS-PA |
| Origin | USA |
| Motor Type | DC motor |
| Input Power | 5 W |
| Output Power | 3 W |
| Max. Heating Power | 15 W |
| Voltage | 100–240 VAC |
| Frequency | 50/60 Hz |
| Stirring Points | 1 |
| Max. Stirring Volume (H₂O) | 3 L |
| Max. Stir Bar Length | 50 mm |
| Speed Range | 100–1500 rpm |
| Speed Display | Dual LED (set speed & actual speed) |
| Control Technology | Microprocessor-based closed-loop feedback control |
| Plate Diameter | φ135 mm (5") |
| Plate Material | Flame-retardant polymer |
| Protection Rating | IP42 (per DIN EN 60529) |
| Dimensions (W×D×H) | 150 × 260 × 80 mm |
| Weight | 1.8 kg |
| Operating Ambient Temperature | 5–40 °C |
| Max. Relative Humidity | 80 % RH (non-condensing) |
| Housing | Fully enclosed flame-retardant plastic enclosure |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RET Basic |
| Stirring Volume (H₂O) | 20 L |
| Speed Range | 0–1500 rpm |
| Heating Power | 600 W |
| Temperature Range | RT to 340 °C |
| Safety Temperature Limit | 50–380 °C |
| Plate Material | Stainless Steel (RET Basic) / White Coated Stainless Steel (RET Basic C) |
| Plate Diameter | Ø135 mm |
| Dimensions (W×D×H) | 160×280×97 mm |
| Weight | 2.4 kg |
| IP Rating | IP42 |
| Compliance | DIN 12878 (for external temperature probe interface) |
| Max. Stir Bar Length | 80×10 mm |
| Heating Rate (1 L H₂O) | 7 K/min |
| Temp. Control Accuracy (with ETS-D6) | ±0.2 K |
| Ambient Operating Conditions | 5–40 °C, ≤80% RH |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | Lab disc |
| Stirring Points | 1 |
| Max. Stirring Volume (H₂O) | 0.8 L |
| Speed Range | 15–1500 rpm |
| Stir Bar Max. Length | 25 mm |
| Plate Material | Polyester Film |
| Plate Diameter | Ø 90 mm |
| Dimensions (W × H × D) | 114 × 12 × 161 mm |
| Weight | 0.3 kg |
| Ambient Temp. | 5–40 °C |
| Relative Humidity | ≤80 % |
| Protection Class | IP65 |
| Explosion Protection | Ex II 3G EEx nC IIB T6, DIN EN 60529 |
| Voltage | 100–240 V AC |
| Frequency | 50/60 Hz |
| Input Power | 5 W |
| Motor Output Power | 3 W |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | color squid |
| Stirring Points | 1 |
| Max. Stirring Volume (H₂O) | 0.8 L |
| Motor Input Power | 2 W |
| Motor Output Power | 1 W |
| Speed Range | 0–1500 rpm |
| Max. Stir Bar Length | 30 mm |
| Work Plate Material | Tempered Glass |
| Work Plate Diameter | Ø 110 mm |
| Dimensions (W × H × D) | 130 × 50 × 135 mm |
| Weight | 0.48 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Ingress Protection | IP54 |
| Voltage | 100–240 V AC |
| Frequency | 50/60 Hz |
| Instrument Input Power | 4 W |
Show next