ChemTron
Filter
Showing 121–150 of 283 results
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | Lab 955 |
| Instrument Type | Benchtop |
| Parameter Types | Dual (pH & Conductivity) |
| pH Range | –2.0 to 20.0 (±0.1), –2.00 to 20.00 (±0.01), –2.000 to 19.999 (±0.005) |
| mV Range | ±1200.0 mV (±0.3 mV), ±2000 mV (±1 mV) |
| Conductivity Range | 0.00–1000 mS/cm (±0.5% of reading) |
| Resistivity | 0.00–99.9 MΩ·cm |
| Salinity | 0.0–70.0 (IOT standard) |
| TDS | 1–999 mg/L |
| Temperature Range | –5.0 to +105.0 °C (±0.1 °C) |
| Temperature Compensation | None, Nonlinear (nlF), Linear (0.000–3.000 %/K), Auto or Manual |
| Cell Constants | Fixed K = 0.01 cm⁻¹ |
| Calibration Range | 0.450–0.500 cm⁻¹, 0.800–0.880 cm⁻¹ |
| Memory Capacity | 500 / 5000 readings* |
| Calibration Points | 1-point pH |
| GLP/AQS Compliance | Yes |
| CMC Function | Yes |
| Interface | Mini USB-B |
| Electrode Connector | DIN pH-2.0 |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | Lacter21 |
| Instrument Type | Benchtop Low-Speed Centrifuge |
| Maximum Speed | 1200 rpm |
| Max RCF | 224 ×g |
| Capacity | 8 or 12 Gerber fat-testing tubes (Ø25 × 212 mm) |
| Dimensions (W × D × H) | 365 × 300 × 450 mm |
| Net Weight | 77 kg |
| Power Supply | 220–230 V, 50–60 Hz |
| Heating Range | Ambient to 80 °C |
| Noise Level | <60 dB(A) |
| Compliance | EN 61010-1, EN 61010-2-020, EN 61326-1, EN 61326-2-6, EN 61010-2-010 |
| Rotor Material | Stainless Steel (autoclavable) |
| Motor | Brushless, Maintenance-Free |
| Control | Microprocessor-based with LCD display (RPM/RCF, time, temperature), 16 programmable methods, PCBS acceleration/deceleration profiling (175 slope options) |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | M-2000 |
| Instrument Type | Humidity & Temperature Calibration Chamber |
| Humidity Range | 10–95 %RH (at 23 °C) |
| Temperature Range | 10–50 °C |
| Humidity Accuracy | ±1 %RH (10–90 %RH), ±2 %RH (>90 %RH) |
| Temperature Accuracy | ≤±0.2 °C |
| Chamber Humidity Stability | ±0.2 %RH (20–25 °C) |
| Chamber Temperature Stability | ±0.1 °C |
| Chamber Humidity Uniformity | ±0.3 %RH |
| Chamber Temperature Uniformity | ±0.2 °C |
| Humidity Setpoint Response Time (Δ30 %RH) | <10 min |
| Cooling Rate | 1.0 °C/min (ambient 23 °C) |
| Heating Rate | 3.0 °C/min (ambient 23 °C) |
| External Gas Flow Rate | up to 3 L/min (requires external temperature-stable loop) |
| Dimensions (W×D×H) | 450 × 360 × 210 mm |
| Net Weight | 13 kg |
| Digital Interface | RS232 / RS485 (optional) |
| Calibration Certificate | NVLAP-accredited |
| Reference Standard | Dual-Pressure Humidity Generator |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | M2000SP-X |
| Humidity Range | <7–95 %RH (at 23 °C) |
| Humidity Accuracy | ±0.8 %RH (at 23 °C) |
| Temperature Range | 10–55 °C |
| Temperature Accuracy | ±0.15 °C (NVLAP-calibrated) |
| Humidity Stability | 0.2 %RH (at 23 °C) |
| Temperature Stability | 0.1 °C (at 23 °C) |
| Humidity Uniformity | 0.1 %RH @ 50 %RH / 23 °C |
| Temperature Uniformity | 0.1 °C @ 50 %RH / 23 °C |
| Equilibration Time | 3–5 min (at 23 °C) |
| External Gas Flow Rate | 3 L/min (with external recirculation) |
| Internal Chamber Dimensions (standard) | 250 × 200 × 100 mm |
| Optional Extended Chamber (M2000SP-XR) | 300 × 250 × 150 mm |
| Probe Diameter Options | 10, 12, 15, 18 mm |
| Calibration Certificate | NVLAP-accredited |
| Communication Interface | RS485 (optional), software-controllable or user-programmable |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | M3000 |
| Temperature Range | 30–360 °C |
| Temperature Resolution | 0.1 °C |
| Accuracy | ±0.3 °C (30–200 °C), ±0.5 °C (200–360 °C) |
| Heating Time | ~4.0 min to 300 °C, ~7.5 min to 360 °C |
| Heating Rate | 1 °C/min |
| Sample Positions | 3 |
| Capillary Diameter | 1.4 mm |
| Interface | RS-232 |
| IP Rating | IP20 |
| Power Supply | 90–264 V AC |
| Dimensions | 210 × 360 × 230 mm |
| Weight | 4.3 kg |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | M5000 |
| Temperature Range | 25–400 °C |
| Heating Time to 300 °C | 4 min |
| Heating Time to 400 °C | 7.5 min |
| Temperature Repeatability | ±0.2 °C |
| Temperature Accuracy | ±0.3 °C (25–200 °C), ±0.5 °C (200–400 °C) |
| Capillary Diameter | 1.4 mm |
| Capillary Measurement Port | 1 |
| Interface | RS232 |
| Ingress Protection Rating | IP20 |
| Power Supply | 85–264 V AC, 47–440 Hz |
| Dimensions (L×W×H) | 230 × 210 × 110 mm |
| Weight | 1.8 kg |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | MAT1100 / MAT1200 / MAT1400 / MAT1500 |
| Detection Principle | Electrochemical (O₂) & Non-Dispersive Infrared (CO₂) |
| Display | High-Brightness TFT Touchscreen |
| Data Storage | 999 Measurements with Timestamp, Operator ID, and Method Metadata |
| Connectivity | USB, RS232, Optional Ethernet |
| Compliance | Designed for GLP/GMP environments |
| Enclosure | IP54-rated metal housing with removable protective cover |
| User Management | Dual-level access control (Operator & Administrator) |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | MD 110 COD / MD 200 COD |
| Optical Wavelengths | 610 nm & 430 nm |
| Compliance | ISO 15705:2002 |
| Display | Large backlit LCD |
| Housing | IP65-rated waterproof enclosure |
| Power Supply | AC adapter or rechargeable battery (MD 200 only) |
| COD Range (with VARIO reagents) | 3–15,000 mg/L O₂ |
| Reagent Format | Pre-filled, sealed COD VARIO test tubes |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | MD52/TF40 |
| Effective Evaporation Area | 0.052 m² |
| Evaporator Internal Diameter | 100 mm |
| Condensing Area | 0.08 m² |
| Feed Capacity | 1 L/h (typical) |
| Max. Feed Viscosity | 5000 cP |
| Operating Pressure Range | Down to 0.001 mbar (0.1 Pa) |
| Heating Temperature Range | Up to 350 °C |
| Wiper Speed | 60–500 rpm |
| Material of Construction | DIN 1.4571 (316Ti stainless steel) & Schott Duran® 3.3 borosilicate glass |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | MIA 2020 |
| Alcohol Strength by Volume (ASV) Range | 0.1–99.9 % vol (BASIC) / 0.050–99.980 % vol (Premium) |
| ASV Accuracy | ±0.1 % vol (BASIC) / ±0.005 % vol (Premium) |
| ASV Repeatability | ±0.1 % vol at 15 °C and 25 °C (BASIC) / ±0.01 % vol at 15 °C and 25 °C (Premium) |
| Density Range | 0.5000–2.2500 g/cm³ (d₂₀/₂₀) |
| Density Resolution | 0.0001 g/cm³ (BASIC) / 0.00001 g/cm³ (Premium) |
| Density Repeatability | ±0.0002 g/cm³ (BASIC) / ±0.00002 g/cm³ (Premium) |
| Temperature Sensor | Pt100, 1/3 DIN class |
| Temp. Resolution | 0.05 °C |
| Temp. Repeatability | ±0.05 °C (10–30 °C) |
| Power Supply | 100–240 V AC, 50/60 Hz |
| Power Consumption | 10 VA |
| Operating Ambient | 10–30 °C (recommended: 15–25 °C) |
| Dimensions (L×D×H) | 210 × 370 × 380 mm |
| Net Weight | 8.5 kg |
| Interface | RS232 I/O |
| Measurement Cycle Time | ≤6 s |
| Calibration | Fully automated internal calibration |
| Standard Accessories | Power supply unit, waterproof interchangeable mass/volume hydrometer set (stainless steel suspension wire, Ø ≤ 0.2 mm), certified alcohol reference standards, double-walled glass measuring cylinder |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | 53610 / 57210 |
| Viscometer Type | Capillary (Ubbelohde) |
| Design Standard | DIN 55350-18, DIN 55526-2, DIN 51562-2 |
| Capillary Geometry | Dilution-type, suspended-level |
| Operating Temperature Range | 10–80 °C (standard), optional -40 to +30 °C or 70 to 150 °C variants |
| Kinematic Viscosity Range | 0.4–8000 mm²/s |
| Sample Volume | 3–4 mL |
| Total Length | ~290 mm (536xx/537xx/538xx), ~350 mm (572xx/573xx/574xx) |
| Calibration | Certified K-value (4 significant digits) available for 536xx (manual use) and 537xx/572xx/573xx (automated systems) |
| Compliance | Traceable to national standards with factory calibration certificate included |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | MINI WHISPER HYBRID |
| Nitrogen Flow Rate | 5–12 L/min @ 1–7 bar |
| Air Flow Output | 35 L/min (dual-stream: 26 L/min @ 7 bar + 10 L/min @ 4 bar) |
| Nitrogen Purity | ≥99% |
| Dew Point | −40 °C (atmospheric) |
| Particle Filtration | ≤0.01 µm, compliant with ISO 8573-1:2010 Class 1.2.1 |
| Inlet Air Requirement | 96–192 L/min at 8.5–10 bar |
| Pressure Drop | ≤1.5 bar |
| Operating Temperature | 15–35 °C |
| Dimensions (W×H×D) | 348 × 735 × 350 mm |
| Weight | 8 kg |
| Certification | CE, IQ/OQ support available |
| Technology | Hollow-fiber membrane separation (0.3 mm ID, 40 nm selective layer) |
| Interface | 1/4" G nitrogen outlet, 1/8" G air outlet |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | MINI WHISPER |
| Nitrogen Flow Rate | 5–12 L/min @ 1–7 bar |
| Nitrogen Purity | ≥98%–99.5% |
| Outlet Pressure Range | 1–7 bar (15–105 psig) |
| Required Inlet Air Pressure | 8.5–10 bar (123–160 psig) |
| Pressure Drop | ≤1.5 bar (22 psig) |
| Dew Point | −40 °C to −50 °C (dependent on inlet air quality) |
| Particulate Filtration | <0.01 µm |
| Air Quality Compliance | ISO 8573-1:2010 Class 1.2.1 |
| Membrane Technology | Hollow-fiber membrane with 40 nm separation layer, 0.3 mm inner diameter |
| Installation Options | Benchtop or wall-mounted |
| Power Requirement | None (passive operation) |
| Dimensions (H×W×D) | 735 × 348 × 350 mm |
| Weight | 8 kg |
| Certifications | CE, IQ/OQ documentation available |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | MINI-WHISPER N₂ |
| Output Flow Rate | 8–12 L/min |
| Output Pressure | 1–7 bar |
| Nitrogen Purity | 98–99.5% |
| Dew Point | −40 °C |
| Dimensions (H×W×D) | 735 × 348 × 350 mm |
| Weight | 8 kg |
| Certification | CE, FCC, CSA |
| Air Inlet Requirement | 5–8 bar, >80 L/min |
| Pressure Drop | <0.8 bar |
| Particulate Filtration | <0.01 µm |
| Operating Temperature | 10–35 °C |
| Interface | 1/4″ G thread (air inlet), 1/8″ G thread (N₂ outlet) |
| Compliance | IQ/OQ documentation available |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | MISTRAL EVO HYBRID |
| Nitrogen Flow Rate | up to 12 L/min at 80 psi |
| Source Air Flow | up to 24 L/min at 100 psi |
| Exhaust Air Flow | up to 8 L/min at 60 psi |
| Nitrogen Purity | 98–99.9% |
| Dew Point | −40 °C |
| Operating Temperature | 15–35 °C |
| Power Supply | 110 V / 60 Hz or 230 V / 50 Hz |
| Power Consumption | 1800 W |
| Pressure Stability | ±0.5% (±0.1 bar) |
| Display | Graphical LCD (128 × 64 px) |
| Noise Level | 55 dB(A) |
| Protection Class | IP2X |
| Dimensions (L × D × H) | 482 × 835 × 641 mm |
| Weight | 90 kg |
| Certifications | CE |
| Output Fittings | 1/4" compression or 6 mm quick-connect |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | MISTRAL EVO |
| Output Flow Rate | 10–40 L/min |
| Output Pressure | 8 bar (116 psi) |
| Nitrogen Purity | 97–99.9% |
| Power Supply | 110 V / 60 Hz or 230 V / 50 Hz |
| Weight | 90 kg |
| Power Consumption | 1800 W |
| Pressure Stability | ±0.1 bar (±0.5%) |
| Display | Graphical LCD (128 × 64 px) |
| Protection Class | IP2X |
| Operating Temperature | 15–40 °C |
| Sound Pressure Level | <60 dB(A) |
| Alarm Relay | 250 VAC, max 16 A |
| Gas Outlet | 1/4" compression fitting or 6 mm push-to-connect |
| Dimensions (L × D × H) | 482 × 835 × 641 mm |
| Certifications | CE |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model Series | 1625, 1628, 1631 |
| Viscometer Type | Suspension-level (Ubbelohde-type) capillary viscometer |
| Portability | Portable |
| Operating Environment | Ambient temperature |
| Kinematic Viscosity Range | 0.6 – 100,000 mm²/s (cSt) |
| Calibration Compliance | ISO/IEC 17025-accredited |
| Sample Requirement | Transparent Newtonian or near-Newtonian liquids |
| Fill Volume | 4–40 mL |
| Total Length | 250–330 mm |
| Capillary Stand Compatibility | BS/IP/SL and BS/IP/MSL standards (A1/A2 series adapters) |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model Numbers | 63927, 63801, 63893 |
| Channel Count | Single-Channel |
| Measurement Range | −50 to +70 °C |
| Resolution | 0.1 °C |
| Accuracy | ±0.5 °C |
| Calibration Points | −20 °C, 0 °C, +4 °C, +37 °C, +21 °C |
| Sensor Fill Fluid | Ethylene Glycol Mixture |
| Application Class | Refrigerated & Controlled Environment Monitoring |
| Compliance Context | Designed for GLP/GMP-aligned temperature validation workflows in clinical and research labs |
| Brand | ChemTron |
|---|---|
| Origin | Switzerland |
| Model | N2 TOWER Plus |
| Nitrogen Generation Principle | Pressure Swing Adsorption (PSA) with Carbon Molecular Sieve (CMS) |
| Output Flow Rate | 4000 mL/min |
| Output Pressure | 5 bar |
| Nitrogen Purity | 99.999% |
| Nitrogen Dew Point | < −50 °C |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | N2-Whisper 0-40 / 0-80 / 0-120 |
| Output Flow | 40–120 L/min N₂ |
| Output Pressure | 8.5–10 bar |
| Purity | >98% N₂ |
| Dew Point | <−40 °C |
| Particulate Filtration | <0.01 µm |
| Pressure Drop | <0.8 bar |
| Dimensions (H×W×D) | 1150×48×260 mm |
| Certifications | CE, FCC, CSA |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | NEB-40 / NEB-50 / NEB-91 |
| Temperature Range | −35 to +90 °C / −40 to +90 °C / −40 to +150 °C |
| Flow Rate | 1–20 L/min |
| Temperature Stability | ±0.01–±0.05 °C / ±0.05–±0.1 °C / ±0.05–±0.2 °C |
| Heating Power | 2.7 / 6 / 18 kW |
| Cooling Power (at 20 °C) | 1.2 / 7.5 / 11 kW |
| Pump Flow Range | 16–40 / 35–76 / 26–80 L/min |
| Pump Pressure | 0.3–1.7 / 0.48–3.2 / 0.5–3.0 bar |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | NLK |
| Compliance | DIN EN 459-2 |
| Measurement Principle | Calorimetric monitoring of heat evolution during lime slaking (wet digestion) |
| Data Acquisition | Dual/multi-point temperature sensing via calibrated thermistors or Pt100 sensors |
| Thermal Isolation | Vacuum-insulated Dewar vessels |
| Output Format | CSV export |
| LIS/LIMS Integration | Yes |
| Calibration | Two-point or multi-point temperature sensor calibration |
| Reporting Parameters | T₀, tₘₐₓ, Tₘₐₓ, T′ₘₐₓ, tᵤ₈₀, Tᵤ₈₀, T₆₀, T₁₀, T₄₀, R-value, max rotational speed |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | NM Plus |
| Hydrogen Generation Principle | Proton Exchange Membrane (PEM) Electrolysis of Deionized Water |
| Output Flow Rate | 300 mL/min |
| Output Pressure | 11 bar (160 psig) |
| Hydrogen Purity | 99.99996% |
| Power Consumption | 100–410 W |
| Brand | ChemTron |
|---|---|
| Origin | Switzerland |
| Model | NMH2-1350plus |
| Hydrogen Generation Principle | CPEM & CCELL Proton Exchange Membrane Electrolysis |
| Output Flow Rate | 100–1350 mL/min |
| Output Pressure | 11 bar (160 psig) |
| Hydrogen Purity | 99.99996% |
| Power Consumption | 100 W |
| Brand | ChemTron |
|---|---|
| Origin | Switzerland |
| Model | NMH2-500 Plus |
| Hydrogen Generation Principle | Proton Exchange Membrane (PEM) Electrolysis of Deionized Water |
| Output Flow Rate | 100–1350 mL/min |
| Maximum Output Pressure | 7 bar |
| Hydrogen Purity | 99.99996% |
| Power Consumption | 75 W |
| Brand | ChemTron |
|---|---|
| Origin | USA |
| Model | NR-20L, NR-30L, NR-50L |
| Vessel Capacity | 20 L, 30 L, 50 L |
| Design Pressure | up to 20 bar |
| Maximum Operating Temperature | 200 °C or 250 °C (dependent on seal material) |
| Construction Material | 316 stainless steel (standard) |
| Jacketed | Yes |
| Jacket Pressure Rating | 3 bar |
| Jacket Volume | ≈5.3 L / ≈15.8 L / ≈20.0 L |
| Bottom Drain Valve | Standard |
| Sealing Options | Viton® (FKM), PTFE, Kalrez® (FFKM) |
| Magnetic Coupling | RV-400 series |
| Standard Fittings | 7 total ports per lid (including 1× central magnetic drive port, 1× thermowell, 1× rupture disc assembly, 1× vent valve, 2× 6 mm ports for heating/cooling coils, 3× 8 mm auxiliary ports) |
| Handle-equipped lid | Yes |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | NR-20L |
| Vessel Capacity | 20 L |
| Construction Material | Stainless Steel (AISI 316) |
| Maximum Operating Pressure | 20 bar |
| Maximum Temperature | 200 °C (with FKM seal) / 250 °C (with FFKM seal) |
| Internal Diameter | 309 mm |
| Internal Height | 425 mm |
| Jacket Volume | ≈5.3 L |
| Jacket Max Pressure | 3 bar |
| Bottom Discharge Valve | Standard |
| Magnetic Coupling | RV-400 |
| Sealing Options | FKM (Viton®), PTFE, FFKM (Kalrez®) |
| Standard Ports | 7 total (1× central for magnetic drive, 1× thermowell, 1× rupture disc, 1× vent valve, 2× 6 mm for heating/cooling coils, 3× 8 mm auxiliary) |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | NR-30L |
| Vessel Capacity | 30 L |
| Construction Material | Stainless Steel (AISI 316) |
| Maximum Operating Pressure | 20 bar |
| Maximum Temperature | 200 °C (with FKM) / 250 °C (with FFKM) |
| Internal Dimensions | Ø340 mm × H470 mm |
| Jacket Volume | ≈15.8 L |
| Jacket Max Pressure | 3 bar |
| Bottom Discharge Valve | Standard |
| Sealing Options | FKM (Viton®), PTFE, FFKM (Kalrez®) |
| Magnetic Coupling Bearing | RV-400 |
| Standard Ports | 7 total (1× central for magnetic drive, 1× thermowell, 1× rupture disc, 1× vent valve, 2× 6 mm for heating/cooling coils, 3× 8 mm auxiliary) |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | NR-500 / NR-1000 / NR-2000 |
| Vessel Material | Stainless Steel (AISI 316) or Hastelloy C-276 |
| Design Pressure | Up to 25 bar |
| Operating Temperature | ≤300 °C (stainless/Hastelloy), ≤230 °C (with PTFE liner) |
| Nominal Volume | 500 mL / 1000 mL / 2000 mL |
| Sealing Options | PTFE, FKM (Viton®), FFKM (Kalrez®) O-rings |
| Vacuum & Pressure Rating | Full vacuum to +25 bar |
| Optional Features | Bottom discharge valve, PTFE liner, magnetic coupling drive (RV-100), jacketed heating/cooling, temperature sensor port, pressure transducer interface, rupture disc safety system |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | NR-5L / NR-10L |
| Material | Stainless Steel (316L) or Hastelloy C-276 |
| Design Pressure | 25 bar |
| Max. Operating Temperature | 300°C (stainless/Hastelloy), 230°C (with PTFE lining) |
| Vessel Capacity | 5 L / 10 L |
| Internal Diameter | 207 mm / 229 mm |
| Internal Height | 234 mm / 320 mm |
| Weight | 16.4 kg / 20 kg |
| Sealing Options | PTFE, FKM (Viton®), FFKM (Kalrez®) O-rings |
| Stirring System | RV-100WB18D / RV-100-SS (standard) |
| Heating Options | Jacketed oil bath (e.g., JULABO), electric heating mantle, or external heating/cooling coil |
| Safety Features | Rupture disc, pressure gauge (optional pressure transducer), temperature well |
| Optional Accessories | Bottom discharge valve, PTFE liner, motorized lifting stand, 6 mm ports for coil integration, three 8 mm auxiliary ports |