JINTENG
Filter
Showing all 25 results
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (China) |
| Model | T-50 (1 L) |
| Price | USD 65 (excl. tax & shipping) |
| Filter Cup Volume | 300 mL |
| Receiving Bottle Capacity | 1000 mL |
| Frit Diameter | 50 mm |
| Frit Pore Size | 10 µm |
| Frit Material | High-Borosilicate Glass |
| Receiving Bottle Diameter | φ47 mm or φ50 mm |
| Connection Type | Standard Taper Ground Joint (ISO 2955 / DIN 12218 compatible) |
| Optional Frit Material | PTFE (20 µm, removable) |
| Clamp Material | Anodized Aluminum Alloy |
| Sterilization Compatibility | Autoclavable at 121 °C, 20 min, 1.1 bar |
| Chemical Resistance | Compatible with aqueous, organic, and corrosive solvents (including HCl, HNO₃, NaOH up to 1 M) |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Instrument Type | Semi-Automatic Membrane Filtration System |
| Filtration Stations | 3 |
| Filter Cup Capacity | 100 mL and 250 mL options |
| Filtration Method | Membrane Filtration (ISO 8573-7 / USP <61> / EP 2.6.12 compliant) |
| Construction Material | 316L Stainless Steel (Autoclavable up to 180°C) |
| Vacuum Source Compatibility | Diaphragm Vacuum Pump (external, not included) |
| Sealing Mechanism | Precision-machined sanitary clamp interface with silicone gasket |
| Regulatory Alignment | Designed for GLP-compliant workflows |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Model | GM-0.20 |
| Ultimate Vacuum Pressure | 300 mbar (abs) |
| Maximum Flow Rate | 12 L/min |
| Motor Power | 75 W |
| Noise Level | <50 dB(A) |
| Operating Temperature Range | 7–40 °C |
| Weight | 4 kg |
| Dimensions (L×W×H) | 195 × 98 × 156 mm |
| Inlet Port Diameter | φ6 mm |
| Positive Pressure Output | 0.07 MPa (≈10 psi) |
| Diaphragm Material | Nylon |
| Housing Material | Anodized Aluminum Alloy |
| Ambient Humidity | ≤80% RH (non-condensing) |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Model | GM-0.20 |
| Pump Type | Diaphragm Vacuum Pump |
| Oil-Free Design | Yes |
| Ultimate Vacuum | 300 mbar (abs) |
| Pumping Speed | 12 L/min |
| Motor Power | 75 W |
| Dimensions (L×W×H) | 195 × 198 × 156 mm |
| Weight | 4 kg |
| Inlet Port Diameter | Φ6 mm |
| Noise Level | <50 dB(A) |
| Operating Temperature Range | 7–40 °C |
| Diaphragm Material | Nitrile Rubber (NBR) |
| Pump Head Material | Nylon 66 |
| Max Positive Pressure Output | 30 psi (207 kPa) |
| Motor Thermal Protection | Integrated |
| Certifications | CE-compliant design, RoHS-conformant |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Model | GM-0.33A (1L) |
| Filter Cup Capacity | 300 mL |
| Receiver Bottle Capacity | 1000 mL |
| Funnel Diameter | 50 mm |
| Sintered Disc Pore Size | 10 µm |
| Funnel & Housing Material | High-borosilicate glass (DIN/ISO-compliant) |
| Receiver Bottle Material | High-borosilicate glass |
| Filter Membrane Compatibility | Ø47 mm or Ø50 mm discs |
| Vacuum Pump Flow Rate | 20 L/min |
| Ultimate Vacuum Pressure | ≤200 mbar (≥0.08 MPa) |
| Motor Power | 160 W |
| Operating Temperature Range | 7–40 °C |
| Weight | 7.5 kg |
| Noise Level | <55 dB(A) |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Model | GM-0.33A (1L) |
| Filter Cup Capacity | 300 mL |
| Receiving Bottle Capacity | 1000 mL |
| Filter Head Diameter | 50 mm |
| Pore Size | 10 µm |
| Filter Head Material | High-Borosilicate Glass |
| Filter Membrane Compatibility | φ47 mm or φ50 mm discs |
| Vacuum Pump Flow Rate | 20 L/min |
| Ultimate Vacuum Pressure | ≤200 mbar (≥0.08 MPa) |
| Motor Power | 160 W |
| Noise Level | <55 dB(A) |
| Operating Temperature Range | 7–40 °C |
| Weight | 7.5 kg |
| Dimensions (W×D×H) | 235 × 120 × 215 mm |
| Construction | Ground-Glass Joints, Removable PTFE Frit, Anodized Aluminum Clamp |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Pump Type | Oil-Free Diaphragm Vacuum Pump |
| Ultimate Vacuum | 50–200 mbar (depending on model) |
| Flow Rate | 20–30 L/min |
| Motor Power | Not specified |
| Dimensions (L×W×H) | 450 × 200 × 300 mm |
| Weight | 10.8 kg |
| Pressure Regulation | Adjustable vacuum/positive pressure output |
| Cooling | Integrated self-cooling exhaust system |
| Membrane Material | Fluoroelastomer (FKM) |
| Mounting | Four suction-cup feet + top carry handle |
| Compliance | Designed for GLP-compliant lab environments |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Pump Type | Diaphragm Vacuum Pump |
| Product Type | Oil-Free Vacuum Pump |
| Ultimate Vacuum Pressure | ≤ 0.075 MPa (≤ 75 mbar) |
| Pumping Speed | 20 L/min |
| Motor Power | 160 W |
| Noise Level | < 50 dB(A) |
| Weight | 7.5 kg |
| Dimensions (L×W×H) | 215 × 120 × 235 mm |
| Inlet/Outlet Port Diameter | φ6 mm |
| Operating Temperature Range | 7–40 °C |
| Diaphragm Material | Fluoroelastomer (FKM) |
| Pump Housing | PTFE-Coated |
| Cooling | Self-Cooling Air Exhaust System |
| Pressure Regulation | Adjustable Vacuum Output |
| Compliance | Designed for GLP-compliant laboratory environments |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Model | GM-0.33A |
| Pump Type | Oil-Free Diaphragm Vacuum Pump |
| Ultimate Vacuum | 200 mbar |
| Flow Rate | 20 L/min |
| Motor Power | 60 W |
| Dimensions (L×W×H) | 235 × 120 × 215 mm |
| Weight | 7.5 kg |
| Inlet/Outlet Port Diameter | Ø6 mm |
| Operating Temperature Range | 7–40 °C |
| Maximum Pump Surface Temperature | <60 °C |
| Noise Level | <55 dB(A) |
| Compliance | CE-marked for laboratory use under IEC 61000-6-3 & IEC 61000-6-2 |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Model | GM-0.33B (GM-0.33III) |
| Pump Type | Oil-Free Diaphragm Vacuum Pump |
| Ultimate Vacuum | ≤ −0.095 MPa (≤ 75 mbar absolute) |
| Air Displacement Rate | 20 L/min |
| Motor Power | 120 W (Single-Phase) |
| Dimensions (W×D×H) | 282 × 130 × 210 mm |
| Weight | 10 kg |
| Operating Temperature Range | 7–40 °C |
| Max. Surface Temperature | < 55 °C |
| Noise Level | < 50 dB(A) |
| Inlet Port Diameter | φ6 mm |
| Dual-Head Configuration | Positive/Negative Pressure Capable |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Model | GM-0.33B |
| Pump Type | Oil-Free Diaphragm Vacuum Pump |
| Ultimate Vacuum | 50 mbar (abs) |
| Pumping Speed | 20 L/min |
| Motor Power | 160 W |
| Dimensions (L×W×H) | 282 × 130 × 210 mm |
| Weight | 10 kg |
| Operating Temperature Range | 7–40 °C |
| Maximum Case Temperature | <55 °C |
| Noise Level | <50 dB(A) |
| Inlet Port Diameter | Ø6 mm |
| Construction | Aluminum Alloy Housing with Epoxy-Polyester Coating & PTFE-Coated Diaphragm Chamber |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Model | GM-0.5A |
| Ultimate Vacuum Pressure | 200 mbar (abs) |
| Positive Pressure Output | 0.08 MPa (g) |
| Pumping Speed | 30 L/min |
| Motor Power | 160 W |
| Operating Temperature Range | 7–40 °C |
| Max Ambient Temp During Operation | <60 °C |
| Noise Level | <55 dB(A) |
| Inlet/Outlet Port Diameter | Ø6 mm |
| Dimensions (L×W×H) | 210 × 160 × 235 mm |
| Weight | 8 kg |
| Diaphragm Material | Fluoroelastomer (FKM) |
| Bearing Type | Imported Precision Ball Bearings |
| Cooling | Integrated Air-Cooled Exhaust System |
| Duty Cycle | Continuous (24/7) |
| Dual-Mode Operation | Vacuum & Positive Pressure |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Model | GM-0.5A |
| Pump Type | Diaphragm Pump |
| Oil-Free Design | Yes |
| Ultimate Vacuum | 850 mbar (abs) |
| Flow Rate | 30 L/min |
| Motor Power | 160 W |
| Dimensions (L×W×H) | 210 × 160 × 235 mm |
| Weight | 8 kg |
| Operating Temperature Range | 7–40 °C |
| Max Ambient Temp During Operation | <60 °C |
| Inlet/Outlet Port Diameter | Ø6 mm |
| Noise Level | <55 dB(A) |
| Pressure Range | −850 mbar to +40 psi (dual-mode) |
| Diaphragm Material | Fluoroelastomer (FKM) |
| Bearing Type | Imported Precision Ball Bearings |
| Cooling | Integrated Air-Cooled Exhaust System |
| Compliance | CE-marked for laboratory use per IEC 61010-1 |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Pump Type | Oil-Free Diaphragm Pump |
| Dual-Mode Operation | Vacuum & Pressure (Positive/Negative) |
| Ultimate Vacuum | ≤ 0.075 MPa (75 kPa absolute) |
| Maximum Positive Pressure | ≥ 30 psi (207 kPa) |
| Air Flow Rate (Vacuum/Pressure Mode) | 30 L/min |
| Motor Power | 120 W, Single-Phase |
| Noise Level | < 55 dB(A) |
| Operating Temperature Range | 7–40 °C |
| Pump Head Material | Anodized Aluminum Alloy with Corrosion-Resistant Coating |
| Diaphragm Material | Fluoroelastomer (FKM) |
| Inlet/Outlet Port Diameter | Ø6 mm |
| Dimensions (W×D×H) | 215 × 165 × 270 mm |
| Net Weight | 8 kg |
| Continuous Duty Rating | Yes (Equipped with Integrated Air-Cooling System) |
| Compliance | Designed for GLP-compliant laboratory environments |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Model | GM-0.5B |
| Ultimate Vacuum | ≥0.095 MPa (≥50 mbar) |
| Pumping Speed | 30 L/min |
| Motor Power | 160 W |
| Noise Level | <50 dB(A) |
| Operating Temperature Range | 7–40 °C |
| Max. Ambient Temperature During Operation | <55 °C |
| Inlet/Outlet Port Diameter | Ø6 mm |
| Dimensions (L×W×H) | 300×120×235 mm |
| Weight | 10 kg |
| Cooling | Self-cooled, continuous-duty design |
| Pressure Regulation | Adjustable vacuum output |
| Construction | Die-cast aluminum housing |
| Configuration | Dual-head negative-pressure diaphragm pump |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Model | GM-0.5B |
| Pump Type | Diaphragm Vacuum Pump |
| Oil-Free Operation | Yes |
| Ultimate Vacuum | 0.095 MPa (≈50 mbar) |
| Air Displacement Rate | 30 L/min |
| Motor Power | 160 W |
| Dimensions (L×W×H) | 300 × 120 × 235 mm |
| Weight | 10 kg |
| Operating Temperature Range | 7–40 °C |
| Maximum Surface Temperature | <55 °C |
| Noise Level | <50 dB(A) |
| Inlet/Outlet Port Diameter | Ø6 mm |
| Cooling | Self-contained air-cooled exhaust system |
| Duty Cycle | Continuous operation capable |
| Pressure Regulation | Adjustable vacuum output |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Model | GM-0.5B |
| Pump Type | Oil-Free Diaphragm Vacuum Pump |
| Ultimate Vacuum | ≥0.095 MPa (200 mbar) |
| Air Displacement Rate | 30 L/min |
| Motor Power | 160 W |
| Inlet/Outlet Port Diameter | Φ6 mm |
| Operating Temperature Range | 7–40 °C |
| Pump Body Temperature | <55 °C |
| Noise Level | <50 dB(A) |
| Dimensions (L×W×H) | 215×120×235 mm |
| Weight | 7.5 kg |
| Diaphragm & Valve Material | Imported Elastomer |
| Housing Material | Die-Cast Aluminum Alloy |
| Electrical Supply | 230 VAC, 50 Hz |
| Corrosion Protection | PTFE-Coated Internal Components |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Model | GM-1.0A (GM-1.00) |
| Pump Type | Diaphragm Vacuum Pump |
| Oil-Free Design | Yes |
| Dual-Mode Operation | Vacuum & Positive Pressure |
| Ultimate Vacuum | ≤ −0.075 MPa (≤ 75 kPa absolute) |
| Maximum Flow Rate | 60 L/min |
| Motor Power | 120 W |
| Dimensions (L×W×H) | 282 × 155 × 200 mm |
| Weight | 10 kg |
| Operating Temperature Range | 7–40 °C |
| Noise Level | < 55 dB(A) |
| Inlet/Outlet Port Diameter | Ø6 mm |
| Cooling | Self-contained air-cooling system |
| Continuous Duty Rating | Yes |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Model | GM-1.0A |
| Pump Type | Diaphragm Pump |
| Ultimate Vacuum | 200 mbar |
| Maximum Positive Pressure | 0.08 MPa (40 psi) |
| Flow Rate | 60 L/min |
| Motor Power | 160 W |
| Noise Level | <55 dB(A) |
| Operating Temperature Range | 7–40 °C |
| Pump Head Temperature | <60 °C |
| Inlet/Outlet Port Diameter | Ø6 mm |
| Dimensions (L×W×H) | 300×160×235 mm |
| Weight | 9 kg |
| Cooling | Self-contained Air-Cooling System |
| Compliance | CE-marked for laboratory use per IEC 61010-1 |
| Brand | JINTENG |
|---|---|
| Origin | Shanghai, China |
| Model | GM-1.0A |
| Pump Type | Diaphragm Vacuum Pump |
| Oil-Free Design | Yes |
| Ultimate Vacuum | ≥0.08 MPa (200 mbar) |
| Air Displacement Rate | 60 L/min |
| Motor Power | 160 W |
| Inlet/Outlet Port Diameter | Φ6 mm |
| Diaphragm & Valve Material | Imported EPDM/NBR Rubber |
| Housing Material | Die-Cast Aluminum Alloy |
| Corrosion Protection | PTFE-Coated Pump Head |
| Operating Ambient Temperature | 7–40 °C |
| Maximum Housing Temperature | <55 °C |
| Dimensions (L×W×H) | 215 × 120 × 235 mm |
| Noise Level | <50 dB(A) |
| Weight | 7.5 kg |
| Electrical Supply | 230 VAC, 50 Hz |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | T-50 |
| Price | USD 65 |
| Filter Cup Capacity | 1 L or 2 L |
| Funnel Diameter | 50 mm or 60 mm |
| Screen Plate Pore Size | 10 µm or 20 µm |
| Funnel Material | High-Borosilicate Glass or PTFE |
| Receiving Bottle Volume | 1000 mL or 2000 mL |
| Membrane Support Diameter | φ47 mm, φ50 mm, or φ60 mm |
| Connection Type | Standard Ground-Glass Joint (ISO 2955 / DIN 12232-1) |
| Sterilization Compatibility | Autoclavable at 121 °C, 20 min |
| Clamp Material | Anodized Aluminum Alloy |
| Screen Plate | Removable PTFE for Corrosive Media |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Material | ASTM F138-compliant 316L stainless steel (electropolished) |
| Configuration | Triple-filter manifold with magnetic base |
| Filtration Capacity | 3 × 500 mL stainless steel filter cups |
| Sterilization Compatibility | Autoclavable (121°C, 20 min), gamma-irradiatable, and ethylene oxide compatible |
| Compliance | USP <788> Particulate Matter in Injections, ISO 8573-7 (compressed air purity for pharmaceutical use), GLP/GMP-aligned design |
| Vacuum Interface | Standard 1/4" NPT vacuum port (shared across all three channels) |
| Sealing | Silicone-free PTFE-coated silicone gaskets (USP Class VI compliant) |
| Optional Accessories | 0.22 µm or 0.45 µm sterile-grade membrane filters (PVDF, nylon, or mixed cellulose ester), filter cup adapters for 25 mm/47 mm membranes |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Authorized Distributor |
| Regional Category | Domestic (China) |
| Model | Stainless Steel Triple-Filter Assembly with Silicone Stopper |
| Pricing | Available Upon Request |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Model | T-50 (1L) |
| Filter Cup Capacity | 300 mL |
| Receiving Bottle Capacity | 1000 mL |
| Filter Head Diameter | 50 mm |
| Pore Size | 10 µm |
| Filter Head Material | High-Borosilicate Glass |
| Receiving Bottle Material | High-Borosilicate Glass |
| Filter Membrane Support | Removable PTFE Frit |
| Connection Type | Standard Ground-Glass Joint (ISO 2768-fine tolerance) |
| Sterilization Compatibility | Autoclavable at 121 °C, 20 min |
| Clamp Material | Anodized Aluminum Alloy |
| Compatible Membrane Diameters | φ47 mm or φ50 mm |
| Chemical Resistance | Full compatibility with aqueous, organic (e.g., acetonitrile, methanol), and corrosive solvents (e.g., dilute HCl, NaOH, TFA) |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | T-50 (1000 mL Capacity) |
| Filter Cup Volume | 300 mL |
| Filter Head Diameter | 50 mm |
| Filter Head Pore Size | 10 µm |
| Filter Head Material | High-Borosilicate Glass |
| Receiving Bottle Capacity | 1000 mL |
| Compatible Membrane Diameter | 47 mm or 50 mm |
| Seal Interface | Ground-Glass Joint |
| Optional Variant | T-50-PTFE (20 µm PTFE Filter Head, Acid/Base-Compatible) |
| Sterilization | Autoclavable at 121 °C for 20–30 min |
| Clamp Material | Anodized Aluminum Alloy |