Jiubin Instruments
Filter
Showing 121–150 of 259 results
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-T HP |
| Price | USD 12,500 (FOB Shanghai) |
| Max Test Load | Up to 50 kN (configurable per fixture setup) |
| Stroke Range | 0–100 mm |
| Frequency Range | 0.1–10 Hz (electro-hydraulic & servo-motor variants available) |
| Control Mode | Closed-loop PID with real-time load/displacement feedback |
| Test Modes | Constant Amplitude, Constant Load, Stepwise Loading, Block Cycle, Spectrum Loading |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-TGA-101 |
| Temperature Range | Ambient to 1150 °C (optional upgrade to 1450 °C) |
| Temperature Accuracy | ±0.1 K |
| Balance Sensitivity | 0.01 mg |
| Heating/Cooling Rate | 1–80 °C/min |
| Balance Capacity | 1 mg–2 g (expandable to 30 g) |
| Isothermal Hold Time | 0–300 min |
| Atmosphere Control | Dual-gas inlet with mass flow regulation (inert, oxidizing, reducing, static, dynamic) |
| Data Interface | USB |
| Compliance | ASTM E1131, ISO 11358, USP <41>, GLP-ready software audit trail |
| Brand | Jiubin Instruments |
|---|---|
| Temperature Range | Ambient to 1450 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Stability | ±0.1 °C |
| Heating Rate | 1–80 °C/min |
| Cooling Time | 15 min (from 1000 °C to 100 °C) |
| Balance Capacity | 1 mg–2 g (expandable to 30 g) |
| Mass Sensitivity | 0.01 mg |
| Isothermal Hold Time | 0–300 min |
| Atmosphere Control | Dual-gas manifold with mass flow regulation (inert, oxidative, reductive, static, dynamic) |
| Data Interface | USB |
| Power Supply | AC 220 V, 50 Hz |
| Dimensions (L×W×H) | 489 × 400 × 343 mm |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-THP |
| Price | USD 12,500 (FOB Shanghai) |
| Type | Electromechanical Servo-Controlled Fatigue Testing System for Viscoelastic Energy Dissipation Components |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-TS |
| Max Test Force | Configurable per fixture and load cell selection (standard options: 500 N, 1 kN, 2.5 kN, 5 kN) |
| Compliance | Designed to support ISO 10243, ASTM E4, ASTM F1678, GB/T 25797, GB/T 2611 |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-UL94 |
| Compliance Standards | UL 94, ASTM D5025, ASTM D5207, GB/T 2408 |
| Flame Calibration | 20 mm (1.76 ± 0.01 g Cu block), 125 mm (19.14 ± 0.02 g Cu block) |
| Gas Supply | High-purity methane (≥98%, 37.1 MJ/m³) |
| Burner Power | 500 W (vertical), 225 W (horizontal) |
| Nozzle Diameter | 0.90 ± 0.03 mm |
| Burner Angle Adjustment | 0°, 20°, 45° |
| Chamber Dimensions | W122 × D52 × H120 cm |
| Observation Window | Tempered glass with sealed glove port |
| Exhaust System | Top-mounted forced-draft fume extraction |
| Temperature Measurement | K-type thermocouple + copper calibration blocks, digital display up to 1000 °C |
| Timing Resolution | 0.1 s electronic stopwatch |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-WAW-100KN |
| Type | Hydraulic Universal Testing Machine |
| Maximum Load Capacity | 100 kN |
| Compliance | GB/T 228.1–2021, ASTM E8/E21, ISO 6892-1 |
| Control System | Electro-hydraulic Servo |
| Test Space | Adjustable for Tensile/Compression/Bending |
| Data Acquisition | 100 Hz Sampling Rate |
| Software | Windows-based with Real-time Curve Display, Report Generation (PDF/Excel), Audit Trail Support |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-WAW-100KN |
| Maximum Load Capacity | 100 kN |
| Load Measurement Accuracy | ≤ ±0.5% FS |
| Displacement Resolution | 0.01 mm |
| Test Speed Range | 0.001–500 mm/min (adjustable) |
| Control Mode | Closed-loop hydraulic servo control |
| Crosshead Travel | 1200 mm |
| Power Supply | 380 V AC, 50/60 Hz |
| Compliance | ISO 7500-1, ASTM E4, ASTM E8/E21, GB/T 228.1–2021 |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-WAW-300 |
| Price Range | USD 14,000 – 42,000 (FOB Shanghai) |
| Instrument Type | Electro-Hydraulic Servo Testing Machine |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-WAW-600 |
| Type | Hydraulic Universal Testing Machine |
| Category | Physical Property Testing Instrument |
| Manufacturer Status | Authorized Distributor |
| Country of Origin | China |
| Price | USD 14,700 (FOB Shanghai, subject to configuration and calibration options) |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB–117A |
| Type | Electromechanical Universal Testing Machine |
| Price Range | USD 7,000 – 14,000 (FOB Shanghai) |
| Compliance | GB/T 16491, ISO 6892-1, ASTM E4, ASTM D638, ASTM D412, ASTM D3574 |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB–117A |
| Type | Electronic Universal Testing Machine |
| Category | Physical Property Testing Instrument |
| Application Focus | Tensile Strength, Winding Uniformity, and Mechanical Integrity Assessment of Filamentous Materials (e.g., Fishing Line, Copper Wire, Silk Thread) |
| Compliance Context | Designed for laboratory- and QC-lab–based mechanical characterization per ISO 204, ASTM D2256, and GB/T 228.1–2021 frameworks |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB–120A |
| Type | Electromechanical Universal Testing Machine |
| Load Capacity | 100 kN (10 Ton) |
| Compliance | GB/T 228.1–2021, ISO 6892–1:2019, ASTM E8/E8M |
| Control System | Digital Closed-Loop Servo Control |
| Test Modes | Tensile, Compression, Bending, Yield Strength, Elongation at Break, Modulus of Elasticity |
| Data Acquisition Rate | Up to 1,000 Hz |
| Force Accuracy | ±0.5% of full scale |
| Displacement Resolution | 0.001 mm |
| Crosshead Speed Range | 0.001–500 mm/min |
| Software | JiubinTest v3.2 (GLP-compliant audit trail, user permission levels, FDA 21 CFR Part 11 ready configuration) |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB/FZ-117 |
| Price Range | USD 1,400–7,200 |
| Instrument Type | Electromechanical Universal Testing Machine |
| Load Capacity | 0–2500 N |
| Force Accuracy | ≤ ±0.2% F.S. |
| Sampling Rate | 1000 Hz |
| Crosshead Speed | 1–1000 mm/min (infinitely variable) |
| Effective Travel | 800 mm |
| Elongation Resolution | 0.01 mm |
| Test Frame Width | 400 mm |
| Dimensions (L×W×H) | 665 × 450 × 1640 mm |
| Weight | 175 kg |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Compliance | GB/T 3923.1–2013, GB/T 3923.2–2013, GB/T 13772.1–2008 |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB/DBF-1 |
| Price Range | USD 1,400 – 7,000 |
| Application Field | Intumescent and Decorative Fire-Retardant Coatings |
| Key | Brand: Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB/GWA-1000B |
| Type | Electro-hydraulic servo universal testing machine |
| Max. Test Force | 1000 kN |
| Force Range | 50–1000 kN |
| Force Resolution | 0.01 kN |
| Displacement Resolution | 0.01 mm |
| Deformation Accuracy | ±0.01 mm |
| Tensile Space | 1000 mm |
| Compression Space | 600 mm |
| Piston Stroke | 150 mm |
| Clamp Jaw Diameter (Std.) | 15.20 mm |
| Piston Speed | 0–50 mm/min |
| Clamping Method | Automatic hydraulic clamping |
| Host Dimensions (W×D×H) | 890 × 660 × 2500 mm |
| Load Frame Type | Cylinder-under structure |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB/GWE-1000B |
| Type | Hydraulic Universal Testing Machine |
| Max. Test Force | 1000 kN |
| Force Measurement Range | 50–1000 kN |
| Force Accuracy | ≤ ±1% of reading |
| Force Resolution | 0.01 kN |
| Displacement Resolution | 0.01 mm |
| Deformation Measurement Accuracy | 0.01 mm |
| Tensile Test Space | 1000 mm |
| Compression Space | 600 mm |
| Piston Stroke | 150 mm |
| Clamp Jaw Capacity (Round Specimen) | Φ15.20 mm |
| Piston Speed | 50 mm/min |
| Clamping Method | Automatic Hydraulic Clamping |
| Host Dimensions (W×D×H) | 890×660×2500 mm |
| Control Console Dimensions (W×D×H) | 1000×700×1400 mm |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB/WAW-1000D |
| Maximum Test Load | 1000 kN |
| Force Measurement Range | 50–1000 kN |
| Force Accuracy | ≤ ±1% of reading |
| Force Resolution | 0.01 kN |
| Displacement Resolution | 0.01 mm |
| Deformation Measurement Accuracy | 0.01 mm |
| Max Tensile Space | 750 mm |
| Max Compression Space | 380 mm |
| Piston Stroke | 150 mm |
| Round Specimen Grip Range | Φ13–Φ40 mm |
| Flat Specimen Thickness Capacity | 0–15 mm |
| Flat Specimen Max Width | 75 mm |
| Compression Plate Diameter | φ160 mm |
| Bend Support Span | 450 mm |
| Bend Roller Width | 140 mm |
| Bend Roller Diameter | Φ40 mm |
| Max Piston Speed | 50 mm/min |
| Clamping Method | Automatic Hydraulic Clamping |
| Host Dimensions (W×D×H) | 900×710×2200 mm |
| Control Cabinet Dimensions (W×D×H) | 1000×700×1400 mm |
| Compliance | GB/T 228.1–2021 (Metallic Materials — Tensile Testing) |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB/WAW-100B |
| Test Force Capacity | 100 kN |
| Force Measurement Range | 4–100% FS |
| Force Accuracy | ≤ ±1% of reading |
| Force Resolution | 0.01 kN |
| Displacement Resolution | 0.01 mm |
| Deformation Measurement Accuracy | 0.01 mm |
| Tensile Test Space | 550 mm |
| Compression Space | 380 mm |
| Piston Stroke | 150 mm |
| Round Specimen Gripping Range | Φ6–Φ26 mm |
| Flat Specimen Thickness Capacity | 0–15 mm |
| Flat Specimen Jaw Width | 70 mm |
| Compression Platen Diameter | φ160 mm |
| Bend Support Span | 450 mm |
| Bend Roller Width | 120 mm |
| Bend Roller Diameter | Φ30 mm |
| Piston Speed | 50 mm/min |
| Clamping Method | Manual |
| Host Dimensions (W×D×H) | 720×580×1950 mm |
| Load Frame Control Cabinet Dimensions (W×D×H) | 1000×700×1400 mm |
| Compliance | GB/T 228.1–2021 (Metallic Materials — Tensile Testing) |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB/WAW-300B |
| Test Force Capacity | 300 kN |
| Force Measurement Range | 4–100% FS |
| Force Accuracy | ≤ ±1% of reading |
| Force Resolution | 0.01 kN |
| Displacement Resolution | 0.01 mm |
| Deformation Measurement Accuracy | 0.01 mm |
| Tensile Test Space | 550 mm |
| Compression Space | 380 mm |
| Piston Stroke | 150 mm |
| Round Specimen Grip Range | Φ6–Φ26 mm |
| Flat Specimen Thickness Capacity | 0–15 mm |
| Flat Specimen Jaw Width | 70 mm |
| Compression Platen Diameter | φ160 mm |
| Bend Support Span | 450 mm |
| Bend Roller Width | 120 mm |
| Bend Roller Diameter | Φ30 mm |
| Piston Speed | 50 mm/min |
| Gripping Method | Hydraulic |
| Overall Dimensions (W×D×H) | 720 × 580 × 1950 mm |
| Control Cabinet Dimensions (W×D×H) | 1000 × 700 × 1400 mm |
| Compliance | GB/T 228.1–2021 (formerly GB 228–2002) |
| Standard Accessories | Dual-range round specimen grips (Φ6–Φ13 & Φ13–Φ26), flat specimen grip (0–15 mm), compression platen (φ160 mm), 3-point bending fixture (450 mm span), YYU-25/50 extensometer (Beijing Iron and Steel Research Institute), servo oil source, digital electro-hydraulic servo valve, proprietary servo & electrical control systems, industrial-grade Lenovo PC, color inkjet printer |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Type | Hydraulic Universal Testing Machine |
| Model | JB/WAW-600KN |
| Maximum Load Capacity | 600 kN |
| Compliance | GB/T 228.1–2021, ISO 6892-1:2019, ASTM E8/E21, JJG 139–2014 |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB/WE-1000B |
| Type | Hydraulic Universal Testing Machine |
| Max. Test Force | 1000 kN |
| Force Range | 50–1000 kN |
| Force Accuracy | ≤ ±1% of reading |
| Force Resolution | 0.01 kN |
| Tensile Space | 700 mm |
| Compression Space | 380 mm |
| Piston Stroke | 150 mm |
| Round Specimen Clamping Diameter | Φ13–Φ40 mm |
| Flat Specimen Clamping Thickness | 0–15 mm |
| Flat Specimen Jaw Width | 75 mm |
| Compression Platen Diameter | φ160 mm |
| Bend Span (Two-Point) | 450 mm |
| Bend Roller Width | 140 mm |
| Bend Roller Diameter | Φ40 mm |
| Piston Speed | 50 mm/min |
| Clamping Method | Hydraulic |
| Host Dimensions (W×D×H) | 890×660×2200 mm |
| Control Cabinet Dimensions (W×D×H) | 1000×700×1400 mm |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB/WE-1000D |
| Type | Hydraulic Universal Testing Machine |
| Max Test Force | 1000 kN |
| Force Measurement Range | 50–1000 kN |
| Force Accuracy | ≤ ±1% of reading |
| Force Resolution | 0.01 kN |
| Tensile Space | 750 mm |
| Compression Space | 380 mm |
| Piston Stroke | 150 mm |
| Round Specimen Grip Range | Φ13–Φ40 mm |
| Flat Specimen Grip Thickness | 0–15 mm |
| Flat Specimen Grip Width | 75 mm |
| Compression Platen Diameter | φ160 mm |
| Bend Span (Two-Point) | 450 mm |
| Bend Support Roll Width | 140 mm |
| Bend Support Roll Diameter | Φ40 mm |
| Piston Speed | 50 mm/min |
| Clamping Method | Hydraulic |
| Overall Dimensions (L×W×H) | 900×710×2200 mm |
| Control Cabinet Dimensions (L×W×H) | 1000×700×1400 mm |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB/WE-100B |
| Test Force Capacity | 100 kN |
| Force Measurement Range | 4–100 kN |
| Force Indication Accuracy | ≤ ±1% of reading |
| Force Resolution | 0.01 kN |
| Tensile Test Space | 550 mm |
| Compression Space | 380 mm |
| Piston Stroke | 150 mm |
| Round Specimen Grip Range | Φ6–Φ26 mm |
| Flat Specimen Grip Thickness | 0–15 mm |
| Flat Specimen Max Jaw Width | 70 mm |
| Compression Platen Diameter | φ160 mm |
| Bending Span (Two-Point) | 450 mm |
| Bending Support Roller Width | 120 mm |
| Bending Support Roller Diameter | Φ30 mm |
| Piston Speed | 50 mm/min |
| Clamping Method | Manual |
| Host Dimensions (W×D×H) | 720×580×1950 mm |
| Control Console Dimensions (W×D×H) | 1000×700×1400 mm |
| Load Cell Manufacturer | Zhenhai, Ningbo |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB/WE-300B |
| Type | Hydraulic Universal Testing Machine |
| Max. Test Force | 300 kN |
| Force Measurement Range | 12–300 kN |
| Force Accuracy | ≤ ±1% of reading |
| Force Resolution | 0.01 kN |
| Tensile Space | 550 mm |
| Compression Space | 380 mm |
| Piston Stroke | 150 mm |
| Round Specimen Grip Range | Φ6–Φ26 mm |
| Flat Specimen Grip Thickness | 0–15 mm |
| Flat Specimen Max. Width | 70 mm |
| Compression Platen Diameter | φ160 mm |
| Bend Span (Two-Point) | 450 mm |
| Bend Roller Width | 120 mm |
| Bend Roller Diameter | Φ30 mm |
| Piston Speed | 50 mm/min |
| Clamping Method | Manual |
| Host Dimensions (W×D×H) | 720×580×1950 mm |
| Control Console Dimensions (W×D×H) | 1000×700×1400 mm |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB/WEW-1000B |
| Type | Hydraulic Universal Testing Machine |
| Max. Test Force | 1000 kN |
| Force Range | 50–1000 kN |
| Force Accuracy | ≤ ±1% of reading |
| Force Resolution | 0.01 kN |
| Displacement Resolution | 0.01 mm |
| Deformation Measurement Accuracy | 0.01 mm |
| Tensile Space | 700 mm |
| Compression Space | 380 mm |
| Piston Stroke | 150 mm |
| Round Specimen Clamping Diameter | Φ13–Φ40 mm |
| Flat Specimen Thickness Capacity | 0–15 mm |
| Flat Specimen Jaw Width | 75 mm |
| Compression Plate Diameter | φ160 mm |
| Bend Span (Two-Point) | 450 mm |
| Bend Support Roller Width | 140 mm |
| Bend Support Roller Diameter | Φ40 mm |
| Piston Speed | 50 mm/min |
| Clamping Method | Automatic Hydraulic Clamping |
| Main Frame Dimensions (W×D×H) | 720×580×2100 mm |
| Load Frame Control Cabinet Dimensions (W×D×H) | 1000×700×1400 mm |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB/WEW-100B |
| Type | Hydraulic Universal Testing Machine |
| Max Test Force | 100 kN |
| Force Measurement Range | 5–100 kN |
| Force Accuracy | ≤ ±1% of reading |
| Force Resolution | 0.01 kN |
| Displacement Resolution | 0.01 mm |
| Deformation Measurement Accuracy | 0.01 mm |
| Tensile Space | 550 mm |
| Compression Space | 380 mm |
| Piston Stroke | 150 mm |
| Round Specimen Grip Range | Φ6–Φ26 mm |
| Flat Specimen Thickness Capacity | 0–15 mm |
| Flat Specimen Width | 70 mm |
| Compression Plate Diameter | φ160 mm |
| Bend Span (Two-Point) | 450 mm |
| Bend Support Roller Width | 120 mm |
| Bend Support Roller Diameter | Φ30 mm |
| Piston Speed | 50 mm/min |
| Gripping Method | Manual |
| Host Dimensions (W×D×H) | 720×580×1950 mm |
| Control Console Dimensions (W×D×H) | 1000×700×1400 mm |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB/WEW-300B |
| Type | Hydraulic Universal Testing Machine |
| Max Test Force | 300 kN |
| Force Measurement Range | 4–100% FS |
| Force Accuracy | ≤ ±1% of reading |
| Force Resolution | 0.01 kN |
| Displacement Resolution | 0.01 mm |
| Deformation Accuracy (2–100% FS) | 0.01 |
| Tensile Space | 550 mm |
| Compression Space | 380 mm |
| Piston Stroke | 150 mm |
| Round Specimen Grip Range | Φ6–Φ26 mm |
| Flat Specimen Thickness Capacity | 0–15 mm |
| Flat Specimen Jaw Width | 75 mm |
| Compression Platen Diameter | φ160 mm |
| Bend Span | 450 mm |
| Bend Roller Width | 120 mm |
| Bend Roller Diameter | Φ30 mm |
| Piston Speed | 50 mm/min |
| Clamping Method | Automatic Hydraulic Clamping |
| Host Dimensions (W×D×H) | 720×580×1950 mm |
| Control Console Dimensions (W×D×H) | 1000×700×1400 mm |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB/WEW-600B |
| Max. Test Force | 600 kN |
| Force Range | 30–600 kN |
| Force Accuracy | ±1% of reading |
| Force Resolution | 0.01 kN |
| Displacement Resolution | 0.01 mm |
| Deformation Measurement Accuracy | 0.01 mm |
| Tensile Space | 650 mm |
| Compression Space | 380 mm |
| Piston Stroke | 150 mm |
| Round Specimen Grip Range | Φ13–Φ40 mm |
| Flat Specimen Thickness Capacity | 0–15 mm |
| Flat Specimen Width | 75 mm |
| Compression Plate Diameter | φ160 mm |
| Bend Span (Max) | 450 mm |
| Bend Roller Width | 120 mm |
| Bend Roller Diameter | Φ30 mm |
| Piston Speed | 50 mm/min |
| Clamping Method | Automatic Hydraulic Clamping |
| Overall Dimensions (L×W×H) | 720×580×2100 mm |
| Control Console Dimensions | 1000×700×1400 mm |
| System Type | Oil-Actuated, Load Frame with Lower Cylinder |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB/WEW-600D |
| Test Force Capacity | 600 kN |
| Force Measurement Range | 24–600 kN |
| Force Accuracy | ≤ ±1% of reading |
| Force Resolution | 0.01 kN |
| Displacement Resolution | 0.01 mm |
| Deformation Measurement Accuracy | 0.01 mm |
| Tensile Test Space | 650 mm |
| Compression Space | 380 mm |
| Piston Stroke | 150 mm |
| Round Specimen Clamping Diameter | Φ13–Φ40 mm |
| Flat Specimen Clamping Thickness | 0–15 mm |
| Flat Specimen Jaw Width | 75 mm |
| Compression Plate Diameter | Φ160 mm |
| Frame Type | Six-column, oil-cylinder-under structure |
| Bending Span | 450 mm |
| Bending Roller Width | 120 mm |
| Bending Roller Diameter | Φ30 mm |
| Piston Speed | 50 mm/min |
| Clamping Method | Automatic hydraulic clamping |
| Overall Dimensions (W×D×H) | 830×700×2100 mm |
| Control Cabinet Dimensions (W×D×H) | 1000×700×1400 mm |
| Standard Accessories | Dual-range round specimen grips (Φ13–Φ26 & Φ26–Φ40), flat specimen grip (0–15 mm), Φ160 compression plate, 450 mm bending fixture |
| Load Cell | Ningbo Zhenhai |
| Extensometer | YYU-25/50 (Beijing Iron and Steel Research Institute) |
| Encoder | Optical rotary encoder |
| Control System | Proprietary Jiubin electronics |
| PC | Lenovo desktop |
| Printer | Color inkjet |