Jiubin Instruments
Filter
Showing 31–60 of 259 results
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-130A |
| Pricing | Upon Request |
| Power Supply | 8.4 V Ni-Cd Rechargeable Battery |
| Measurement Range | 0–9999 rpm |
| Resolution | 1 rpm |
| Accuracy | ±3% of reading |
| Interface | Standard 9-pin RS232 (TXD on pin 3, RXD on pin 2, GND on pin 5) |
| Operating Environment | Ambient temperature 0–45 °C, relative humidity 30–90% RH, atmospheric pressure 86.0–106.0 kPa, low electromagnetic interference and mechanical shock required |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-150 |
| Pricing | Available Upon Request |
| Brake Distance Measurement Range | 0–20 m |
| Brake Distance Accuracy | ±1% F.S. |
| Brand | Jiubin Instruments |
|---|---|
| Model | JB-150-BK-S |
| Max Test Pressure | 0–1500 bar (150 MPa) |
| Test Medium | Municipal Tap Water |
| Drive Air Pressure | 3–6.9 bar |
| Air Flow Rate | 2 m³/min |
| Pressure Control Accuracy | ±10 bar (hold), ±0.5% FS (sensor) |
| Pressure Ramp Rate | 100–6000 bar/min (adjustable) |
| Power Supply | 220 V, 50 Hz, 0.15 kW |
| Control Interface | Integrated Touchscreen PC with A4 Report Export |
| Dimensions (Control Cabinet) | 800 × 700 × 1500 mm |
| Dimensions (Test Chamber) | 2000 × 900 × 1200 mm |
| Construction | 304 Stainless Steel Chamber + Dual-Pump Air-Driven Hydraulic System |
| Safety Features | Explosion-Resistant Tempered Glass Lid, Automatic Depressurization, Dual-Stage Filtration |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (PRC) |
| Model | JB-16 |
| Price Range | USD 7,000–14,000 |
| Measurement Principle | Laser Flash Method (ASTM E1461, ISO 22007-4 compliant) |
| Dimensions (L×W×H) | 3000 × 2200 × 1500 mm |
| Accuracy Class | 0.5 (per GB/T 7782–2008 & JJG 1044–2008) |
| Thermal Conductivity Test Range | 0.03–4.0 W/(m·K) |
| Repeatability | ≤ ±2.0% (at 23 °C, RH 50%, standard reference material NIST SRM 1453) |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-1650 |
| Furnace Type | Box-type |
| Max Temperature | 1650 °C |
| Temperature Uniformity | ±1 °C |
| Heating Rate | 0–10 °C/min (recommended) |
| Heating Element | Silicon Molybdenum (MoSi₂) Rods |
| Internal Chamber Dimensions | 600 × 400 × 300 mm (D × W × H) |
| Chamber Material | High-purity Al₂O₃ polycrystalline ceramic fiber (>92% Al₂O₃) |
| Thermocouple Type | Type B |
| Power Rating | ~20 kW |
| Voltage | 380 V AC |
| Vacuum Level (Cold) | –0.1 MPa |
| Gas Inlets | 2 independent ports with float-type flowmeters (0–2 L/min) |
| Control System | Yudian intelligent PID programmable controller (30-segment ramp/soak) |
| Safety Protections | Over-temperature, thermocouple break, over-current, over-voltage, and deviation alarms |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-18380 |
| Chamber Internal Dimensions | 1000 × 2000 × 4000 mm (W × D × H) |
| Air Inlet | 800 × 400 mm @ 5 m³/h |
| Exhaust Opening | 300 × 1000 mm |
| Adjustable Burner Height | 600 ± 5 mm |
| Air Flow Regulation | 4.5–10 m³/min ±5% |
| Propane Flow Control | 5–20 L/min ±1% (via pressure regulator & gauge) |
| Compressed Air Flow | 50–100 L/min ±1% (rotameter-controlled) |
| Anemometer Range | 0.05–5 m/s ±2% |
| Timer Range | 0–60 min ±0.5 s (auto gas cutoff) |
| Internal Thermocouple | 0–100 °C ±1% |
| Dual Stainless Steel Ladder Assemblies | 500 ±5 mm & 800 ±5 mm wide × 3500 ±10 mm high, 9-step |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-1m³L |
| Chamber Volume | 1 m³ |
| Temperature Control Range | 15–30 °C (±0.5 °C) |
| Relative Humidity Control Range | 30–70 % RH (±3 % RH) |
| Air Exchange Rate | 0.2–2.0 h⁻¹ (adjustable, ±5 % accuracy) |
| Internal Construction | Stainless Steel 316L with electropolished finish |
| Wall Insulation | High-efficiency polyurethane foam (≥50 mm thickness) |
| Airflow Uniformity | ≥90 % across test volume per ISO 16000-9 |
| Compliance | Designed to meet ISO 16000-9, ASTM D6007, JIS A 1901, GB/T 18883–2022, and EN 16516 requirements |
| Data Logging | Integrated real-time monitoring of T, RH, airflow, and chamber pressure |
| Interface | RS485 + Ethernet (Modbus TCP), optional USB export |
| Power Supply | 220 V AC ±10 %, 50 Hz, 3.5 kW |
| Brand | Jiubin Instruments |
|---|---|
| Model | JB-200 |
| Type | Agate Mortar Grinder |
| Sample Compatibility | Hard, brittle solids (e.g., metal oxides, pigments, inorganic powders) |
| Output Particle Size | ≥0.5 mm (adjustable down to sub-micron range via extended processing) |
| Mortar Diameter | 120 mm |
| Max Batch Capacity | 100 g per cycle |
| Pestle Rotation Speed | 1–100 rpm (stepless adjustable) |
| Mortar Rotation Speed | 10 rpm |
| Pestle Motor Power | 25 W |
| Mortar Motor Power | 10 W |
| Grinding Time Range | 1–999 min (programmable) |
| Dimensions (L×W×H) | 310 × 240 × 580 mm |
| Net Weight | 18 kg |
| Input Voltage | AC 220 V, 50/60 Hz |
| Grinding Media | Natural agate (mortar and pestle) |
| Compliance | Designed for GLP-compliant laboratories |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-200 |
| Grinding Bowl Diameter | 200 mm |
| Bowl Depth | 63 mm |
| Max. Sample Capacity | 500 g |
| Pestle Speed | 1–150 rpm (adjustable) |
| Mortar Speed | 10 rpm |
| Pestle Power | 60 W |
| Mortar Drive Power | 40 W |
| Bowl & Pestle Material | Natural Agate |
| Particle Size Output | 0.01–0.5 mm |
| Grinding Time Range | 1–999 min (programmable) |
| Dimensions (L×W×H) | 500×500×920 mm |
| Net Weight | 40 kg |
| Voltage | 220 V, 50/60 Hz |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-201E |
| Price | Upon Request |
| Measurement Principle | UV-Vis Spectrophotometry (Acetylacetone Colorimetric Method) |
| Wavelength Range | 325–1000 nm |
| Spectral Bandwidth | 5 nm |
| Wavelength Accuracy | ±2 nm |
| Wavelength Repeatability | 1 nm |
| Photometric Range | Transmittance 0–100%, Absorbance 0–2.0 A |
| Formaldehyde Quantification Range | 5.00–500.00 mg/kg |
| Photometric Accuracy | ±2% FS |
| Light Source | Imported Long-Life Tungsten-Halogen Lamp |
| Optical System | Self-Aligning Optical Path with 1200 lines/mm Diffraction Grating Monochromator |
| Power Supply | AC 220 V ±10%, 50 Hz, 50 W |
| Dimensions (W×D×H) | 400 × 300 × 200 mm |
| Weight | 10 kg |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-220E |
| Measurement Principle | Photometric Method (based on acetylacetone derivatization) |
| Chamber Volume | 1 m³ |
| Temperature Control Range | 15–30 °C (±0.5 °C uniformity) |
| Relative Humidity Control Range | 30–70 % RH (±3 % RH stability) |
| Air Exchange Rate | 0.5–1.5 h⁻¹ (adjustable, calibrated per ISO 12460-1) |
| Internal Surface Material | Stainless Steel 316L with electropolished finish |
| Sample Capacity | Up to 1.0 m² test specimen (standardized board or furniture panel) |
| Compliance | ISO 12460-1, GB/T 17657–2013, ASTM D6007–22, JIS A 1460 |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-220E |
| Price Range | USD 14,000 – 42,500 (FOB Shanghai) |
| Detection Principle | Dynamic Chamber Method with Integrated PID/EC Sensor Array |
| Instrument Type | Continuous Online Monitoring System |
| Standard Configuration | Integrated TVOC + Formaldehyde Dual-Channel Analysis Module |
| Humidity Control Range | 30–70% RH |
| Humidity Control Accuracy | ±3.0% RH |
| Humidity Resolution | ±2% RH |
| Airflow Velocity in Chamber | 0.1–0.3 m/s |
| Chamber Volume | 1 m³ (standard), configurable to 0.5–5 m³ |
| Temperature Control Range | 15–35°C (±0.5°C stability) |
| Material | Electropolished 316L Stainless Steel Interior with Silicone-Free Sealing |
| Compliance | Meets ASTM D6007–22, ISO 16000-9:2022, GB/T 18883–2022, and JIS A 1912:2020 requirements for chamber-based emission testing |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Region | Domestic (China) |
| Model | JB-220E |
| Pricing | Upon Request |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-220E |
| Measurement Principle | Photometric Method (Based on Hantzsch Reaction) |
| Temperature Control Range | 15–30 °C (±0.5 °C stability) |
| Humidity Control Range | 40–70 % RH (±3 % RH uniformity) |
| Internal Volume | 220 L |
| Chamber Construction | Stainless Steel 304 inner chamber with double-wall insulation and PID-controlled heating/cooling + humidification/dehumidification system |
| Compliance | Designed to meet ISO 16000-9, GB/T 18204.2–2014, JIS A 1912, and ASTM D6007 requirements for formaldehyde emission testing preconditioning |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | JB-221 |
| Pricing | Upon Request |
| Power Supply | 8.4 V Ni-MH Battery Pack |
| Measurement Range | ≤100 kN (sensor-dependent, scalable) |
| Resolution | 10 N |
| Accuracy | ±5% |
| Communication Interface | Standard 9-pin RS232 (TXD on Pin 3, RXD on Pin 2, GND on Pin 5) |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-2301 |
| Temperature Range | RT to 300 °C |
| Interior Dimensions (W×D×H) | 600 mm × 500 mm × 750 mm |
| Temperature Uniformity | ±2 °C (loaded) / ≤3 °C (unloaded) |
| Temperature Stability | ±0.5 °C |
| Heating Rate | ≥3 °C/min (non-linear) |
| Control Resolution | 0.1 °C |
| Timer Range | 000:01–999:99 h:min |
| Drive Motor | 1/4 HP |
| Safety Protections | Overtemperature, Overload, Leakage Current |
| Alarm | Audible Buzzer |
| Heating Power | 3.2 kW |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-236 |
| Temperature Control Range | 100–200 °C |
| Heating Time | <10 min |
| Oscillation Frequency | 1.7 ± 0.1 Hz (100 rpm) |
| Oscillation Angle | 0.5° or 1° |
| Rotor Diameter (with rotor) | 35.55 ± 0.07 mm |
| Torque Range | 0–30 N·m |
| Torque Resolution | 0.01 N·m |
| Power Supply | 220 V AC |
| Pneumatic Pressure Requirement | 0.5 MPa |
| Output | Date, Time, Temperature, Manufacturer ID, Vulcanization Curve, Temperature Profile, ML, MH, t90, and Related Curing Parameters |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-25T-2 |
| Type | Semi-Automatic Two-Platen Hydraulic Vulcanizing Press |
| Nominal Clamping Force | 250 kN |
| Platen Size | 300 mm × 300 mm |
| Heating Method | Electric Cartridge Heaters |
| Temperature Control Range | Ambient to 200 °C |
| Temperature Uniformity | ±1.5 °C across platen surface |
| Cycle Time (typical) | 3–8 min (dependent on compound and thickness) |
| Control System | PLC with HMI touchscreen interface |
| Safety Compliance | CE-marked per EN 692:2014 (mechanical presses), ISO 13857 guarding requirements |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-280 |
| Temperature Control Range | 50–400 °C |
| Temperature Accuracy | ±0.2 °C |
| Temperature Resolution | 0.1 °C |
| Die Capillary Inner Diameter | 2.095 ±0.005 mm |
| Barrel Inner Diameter | 9.550 ±0.025 mm |
| Piston Head Diameter | 9.475 ±0.01 mm |
| Piston Head Length | 6.35 ±0.1 mm |
| Piston Travel Distance | 30 mm |
| Position Detection Accuracy | ±0.1 mm |
| Temperature Recovery Time | ≤4 min |
| Max Power Consumption | ≤500 W |
| Standard Weights | 0.325 kg (with piston rod), 0.875 kg, 0.96 kg, 1.2 kg, 1.64 kg |
| Display | LCD with Chinese interface |
| Functions | Automatic timing, automatic cutting, thermal printing |
| Key | Brand: Jiubin Instruments |
|---|---|
| Model | JB-280B |
| Origin | Shanghai, China |
| Temperature Range | 50–400 °C |
| Temperature Accuracy | ±0.2 °C |
| Display Resolution | 0.1 °C |
| Die Diameter | 2.095 ±0.005 mm |
| Barrel ID | 9.550 ±0.025 mm |
| Piston Head OD | 9.475 ±0.01 mm |
| Piston Length | 6.35 ±0.1 mm |
| Stroke Detection Range | 30 mm |
| Displacement Accuracy | ±0.1 mm |
| Standard Load Levels | 3.185 N, 11.76 N, 21.168 N, 37.24 N, 49 N |
| Max Power Consumption | ≤500 W |
| Temperature Recovery Time | 4 min |
| Brand | Jiubin Instruments |
|---|---|
| Model | JB-280C |
| Standard Compliance | GB/T 3682, ISO 1133-1:2011, ASTM D1238 |
| Temperature Range | 50–450 °C |
| Temperature Accuracy | ±0.2 °C |
| Resolution | 0.1 °C |
| MFR Range | 0.1–800.00 g/10 min |
| MVR Range | 0.1–800.00 cm³/10 min |
| Load Levels | 5 standard weights (3.185 N to 49 N) |
| Barrel ID | 9.550 ± 0.025 mm |
| Die ID | 2.095 ± 0.005 mm |
| Piston Stroke Detection | ±0.1 mm over 30 mm travel |
| Power Consumption | ≤500 W |
| Temperature Recovery Time | ≤4 min |
| Control System | Industrial PLC with LCD HMI + PC-based data interface |
| Cutting Modes | Manual, Time-controlled, Auto-triggered |
| Measurement Methods | Mass Flow Rate (MFR) and Volume Flow Rate (MVR) |
| Melt Density Calculation | Enabled |
| Calibration Support | Built-in temperature calibration function |
| Data Handling | Local storage, USB export, thermal printer support |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (PRC) |
| Model | JB-300 |
| Price Range | USD 7,000 – 14,000 |
| Instrument Type | Electromechanical Universal Testing System |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-300A |
| Capacity | 0–300 kN (selectable within range) |
| Load Cell | High-precision U.S.-manufactured load cell |
| Load Accuracy | ±1% of full scale |
| Effective Test Width | 300 mm |
| Max. Tensile Travel | 550 mm |
| Drive System | Hydraulic actuation with electro-hydraulic servo control |
| Test Speed Range | 5–500 mm/min |
| Display & Control | Dual-mode interface — embedded microcomputer + PC-based software |
| Unit Options | g, kg, N, kN, lbf, lb |
| Fixture Mounting | Standard T-slot crosshead and base |
| Optional Accessories | PC workstation, thermal/inkjet printer, extensometer (contact or non-contact), ISO/ASTM-compliant test software module |
| Net Weight | 1580 kg |
| Compliance | Designed to meet general requirements of ISO 6892-1, ASTM E4, ASTM E8, and GB/T 228.1 |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Region of Manufacture | Domestic (PRC) |
| Model | JB-311 |
| Pricing | Available Upon Request |
| Power Supply | DC 9.6 V (8× Ni-MH rechargeable battery) |
| Torque Range | −200 to +200 N·m |
| Angular Range | −1080° to +1080° |
| Torque Resolution | 0.1 N·m |
| Angle Resolution | 0.1° |
| Torque Accuracy | ±2% F.S. |
| Angle Accuracy | ±3° |
| Communication Interface | Standard 9-pin RS232 (TXD: Pin 3, RXD: Pin 2, GND: Pin 5) |
| Baud Rate | 9600 bps |
| Data Format | 8 data bits, 1 stop bit, no parity |
| Max Cable Length | 30 m |
| Dimensions | Ø400 × 200 mm |
| Mounting Diameter Range | Ø320–Ø480 mm (optional extended range: Ø380–Ø550 mm) |
| Brand | Jiubin Instruments |
|---|---|
| Model | JB-319B |
| Origin | Shanghai, China |
| Applicable Standard | GB/T 8333–2008 |
| Burner Inner Diameter | Φ9.5 ± 0.5 mm |
| Burner Length | 102 mm |
| Adjustable Flame Height | 20–175 mm |
| Maximum Flame Temperature | 1100 °C (Bunsen burner flame at 960 °C ± 20 °C) |
| Timing Range | 0–99 min 99 sec (flame application & afterflame duration) |
| Gas Supply | Liquefied Petroleum Gas (LPG) or Town Gas |
| Air Adjustment Port | Integrated |
| Compliance | GB/T 8333–2008 (equivalent to ISO 5657:1997 for vertical flame propagation on rigid cellular plastics) |
| Warranty | 12-month parts and labor coverage |
| Brand | Jiubin Instruments |
|---|---|
| Model | JB-321 |
| Origin | Shanghai, China |
| Power Supply | DC 8.4 V (600 mAh Ni-MH battery) |
| Weight | 1.5 kg (including battery and telescopic stand) |
| Steering Angle Range | ±1080° |
| Steering Force Range | 0–500 N |
| Steering Angle Resolution | 0.1° |
| Steering Force Resolution | 0.1 N |
| Steering Force Accuracy | < 2% FS |
| Steering Angle Accuracy | ±2° |
| Compatible Steering Wheel Diameter | 33–56 cm |
| Display | Dot-matrix LCD with Chinese characters |
| Data Storage | 100 test records |
| Interface | Standard 9-pin RS232 serial port |
| Compliance | Designed for automotive OEM, repair, and inspection applications per GB/T 18488, QC/T 480, and ISO 7400 series reference practices |
| Brand | Jiubin Instruments |
|---|---|
| Model | JB-322A |
| Standard Compliance | GB 15442.2 |
| Test Principle | Vertical Furnace Method for Fire-Retardant Coating Performance |
| Sample Mounting | Single-Sided Coated Combustible Substrate |
| Alarm Threshold | Back-Surface Temperature ≥ 220 °C |
| Data Logging | Time-Temperature Curve Recording |
| Dimensions (L×W×H) | Test Stand 820 × 1500 mm |
| Warranty | 12-Month Parts & Labor, Lifetime Technical Support |
| Origin | Shanghai, China |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-362 |
| Compliance | UL 1581, VDE 0472 |
| Oscillation Frequency | 10–40 cycles per minute (CPM), adjustable |
| Stroke Length | 40–100 mm, adjustable |
| Load Mass | 450 g ±5 g (standard), customizable options available |
| Counting Function | Automatic cycle counter with digital display |
| Drive Mechanism | Electromechanical cam-driven linear reciprocating motion |
| Sample Fixturing | Dedicated clamping fixture for 30 mm wire segment with printed surface oriented upward |
| Construction | Powder-coated steel frame with precision-machined aluminum test platform |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-40 |
| Pricing | Available Upon Request |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Region of Manufacture | Domestic (China) |
| Model | JB-400 |
| Pricing | Available Upon Request |