MOTIS
Filter
Showing 91–105 of 105 results
| Brand | MOTIS |
|---|---|
| Origin | Shanghai, China |
| Model | VF-1 |
| Compliance Standards | ASTM D6413, ISO 6941, GB/T 5455, CFR 1615/1616, CA TB117 |
| Chamber Material | Stainless Steel (304) |
| Viewing Window | Tempered Borosilicate Glass |
| Burner Adjustment | Linear Sliding Rail with Precision Needle Valve |
| Sample Holder Options | Multiple Interchangeable Fixtures for Woven, Knitted, and Nonwoven Textiles |
| Flame Height Range | 10–50 mm (adjustable via calibrated needle valve) |
| Ignition Source | Laboratory-grade Bunsen-type Gas Burner (Propane or Butane) |
| Brand | MOTIS |
|---|---|
| Origin | Shanghai, China |
| Model | VF-2 |
| Compliance | CA TB 117 (Sec. A & B), CPAI 84 (Wall & Top), FAA FAR 25 App. F Part I, Boeing BSS 7230, Airbus AITM 2.0002, ASTM D6413 |
| Ignition Source | ASTM D5025-compliant Bunsen burner |
| Flame Application | Motorized lateral burner movement |
| Timing Resolution | 0.1 s |
| Chamber Construction | Stainless steel with transparent quartz side viewport |
| Sample Holders | Interchangeable stainless steel fixtures for multi-standard adaptability |
| Control Mode | Fully automated flame positioning and timing sequence |
| Brand | MOTIS |
|---|---|
| Model | VFT |
| Standard Compliance | ISO 15025, AQ 6103–2007 |
| Ignition Source | Propane burner |
| Ignition Duration | Adjustable (default 10 s) |
| Sample Orientation | Vertical |
| Measured Parameters | Afterflame time, afterglow time, char length |
| Burner Control | Stepper motor–actuated angular positioning for bottom-edge and edge ignition |
| Display | Integrated LCD interface |
| Power Supply | 220 V, 50 Hz |
| Ambient Conditions | 20 ± 2 °C, 65 ± 5 % RH |
| Dimensions (W × H × D) | 410 × 900 × 380 mm |
| Gas Supply | Propane |
| Brand | MOTIS |
|---|---|
| Model | VFT |
| Application | Automotive Interior Trim (M-Class Vehicles ≥22 Passengers) |
| Compliance | GB 32086–2015 |
| Construction | Stainless Steel Sample Holder Frame (560 mm H × 170 mm W) |
| Burner | Brass, Adjustable ±30° Tilt & Vertical Positioning |
| Ignition | High-Voltage Pulse Auto-Ignition |
| Control System | PLC + Touchscreen HMI |
| Timing | Fully Automated (Ignition Duration, Afterflame Time, Burn Rate Calculation) |
| Sample Fixation | Dual 2 mm Diameter Pins (27 mm Spacing), 20 mm Height Stop Pins |
| Flame Impingement Distance | 20 mm from Specimen Bottom |
| Marking Line Adjustment | Motorized Positioning |
| Flame Detection | Precision Microswitch-Based Endpoint Sensing |
| Data Handling | Automatic Burn Rate (mm/min) Computation & Timestamped Storage |
| Brand | MOTIS |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | WFT |
| Pricing | Available Upon Request |
| Compliance | GB/T 29416–2012 |
| Heat Release Rate Peak | (3.0 ± 0.5) MW |
| Total Energy Release (30 min) | ~4500 MJ |
| Fuel Load | ~400 kg Wood |
| Ignition Delay Alert | Automated 5-min pre-ignition warning |
| Data Acquisition | Real-time temperature, droplet onset, collapse timing, thermal flux, and flame dynamics |
| Sensor Suite | 3 × Medtherm water-cooled heat flux gauges (0–100 kW/m²), 1 × OMEGA anemometer (0–10 m/s, ±0.1 m/s), 30 × OMEGA thermocouples, dual high-resolution CCTV monitoring, Advantech DAQ modules, dedicated control & signal conditioning cabinets |
| Brand | MOTIS |
|---|---|
| Model | XP-2 |
| Standard Compliance | ASTM D2843 |
| Chamber Coating | PTFE (Teflon®) Interior |
| Light Source | Calibrated Incandescent Lamp |
| Photodetector | Cosine-Corrected Silicon Photodiode with Visible-Spectrum Bandpass Filter (380–780 nm) |
| Main Burner Pressure | 256 kPa |
| Auxiliary Burner | Integrated for Dripping Combustion Control |
| Data Acquisition Interval | 15 s |
| Output | SDR (Smoke Density Rating) Integral & Time-Resolved Curve |
| Software Features | Multi-sample SDR Overlay, Comparative Analysis, CFR 21 Part 11–Ready Report Export |
| Chamber Marking | High-Contrast “EXIT” Label on White Background |
| Viewing Window | Optical-Grade Quartz, UV/IR-Blocked |
| Brand | MOTIS |
|---|---|
| Origin | Shanghai, China |
| Model | XP-2 |
| Compliance | ASTM D2843 |
| Chamber Coating | PTFE (Teflon®) Interior |
| Light Source | Calibrated Tungsten Filament Lamp |
| Detector | Cosine-Corrected Silicon Photodiode with Visible-Spectrum Bandpass Filter (380–780 nm) |
| Main Burner Pressure | 256 kPa |
| Auxiliary Burner | Integrated for Dripping Combustion Control |
| Data Acquisition Interval | 15 s |
| Output | SDR (Smoke Density Rating) Integral & Time-Resolved Curve |
| Software | ASTM-D2843-Compliant Reporting Suite with Multi-Sample Overlay, Comparative Analysis, and CFR 21 Part 11–Ready Audit Trail |
| Brand | MOTIS |
|---|---|
| Origin | Shanghai, China |
| Model | XP-2 |
| Compliance | ASTM D2843 |
| Chamber Coating | PTFE (Teflon®) Interior |
| Light Source | Calibrated Incandescent Lamp |
| Detector | Cosine-Corrected Silicon Photodiode with Visible-Spectrum Filter (380–780 nm) |
| Primary Burner Pressure | 256 kPa |
| Auxiliary Burner | Integrated for Dripping Combustion Control |
| Data Acquisition | 15-s Interval Transmittance Logging |
| Output | SDR (Smoke Density Rating) Calculation & Multi-Sample Comparative Analysis |
| Software | Windows-Based, CFR Part 11 Compliant Audit Trail Optional |
| Chamber Viewing Window | Optical-Grade Quartz with EXIT Marking (White-on-Red) |
| Brand | MOTIS |
|---|---|
| Origin | Jiangsu, China |
| Model | NES 713 |
| Compliance Standard | NES 713 (Naval Engineering Standard) |
| Operating Temperature | 800 °C |
| Chamber Volume | V m³ (user-specified per configuration) |
| Sample Mass | 100 g (standard test mass) |
| Toxicity Index Calculation | Σ(C₈ᵢ / Cfᵢ), i = 1 to n |
| Observation Window | Reinforced PTFE-coated polycarbonate viewport |
| Exhaust Control | Timer-actuated automatic purge mode |
| Test Modes | Manual and programmable automatic cycle |
| Chamber Lining | PTFE-bonded stainless steel interior |
| Door Mechanism | Positive-seal dual-latch system |
| Ignition System | Electric spark ignition with auto-shutoff |
| Brand | MOTIS |
|---|---|
| Origin | Shanghai, China |
| Model | NFP-1 |
| Compliance | NFPA 701 (2004 & 2009 Ed.), Test Method 1 |
| Burner Type | Meker Burner |
| Heat Output | 10,500 BTU/hr |
| Ignition | Automatic spark ignition |
| Burn Duration | Fixed 20 s ± 0.1 s |
| Timer Resolution | 0.1 s |
| Sample Holder | Standard ASTM/NFPA-compliant specimen clamp |
| Max Fabric Areal Density | 700 g/m² (21 oz/yd²) |
| Chamber Construction | Calcium silicate board lined with stainless steel exterior |
| Configuration | Open-top vertical combustion chamber |
| Brand | MOTIS |
|---|---|
| Origin | Shanghai, China |
| Model | NFP-2 |
| Construction | Full stainless steel chamber |
| Burner | Standard NFPA 701-compliant burner with precision mass flow control and real-time gas flow monitoring |
| Ignition Angle | 25° fixed-angle burner head |
| Timing System | Programmable pre-set ignition duration + automatic test time logging |
| Compliance | NFPA 701–2004 (Method 1 & Method 2) |
| Brand | MOTIS |
|---|---|
| Origin | Shanghai, China |
| Model | Polynorme 503 |
| Applicable Standard | NFP 92-503 |
| Test Principle | Radiant Heat + Pilot Flame Ignition |
| Application Scope | Building Materials & Railway Components Combustibility Assessment |
| Compliance | French National Fire Safety Regulations for Construction and High-Speed Rail Infrastructure |
| Brand | MOTIS |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | SPI |
| Pricing | Upon Request |
| Brand | MOTIS |
|---|---|
| Model | STF |
| Standard Compliance | UL 910 / NFPA 262 |
| Chamber Construction | Stainless Steel (304) with Refractory Brick Lining |
| Observation Window | Dual-Layer Quartz Glass |
| Flame Propagation Monitoring | LED Indicator Strip System |
| Smoke Seal | 2 mm 304 Stainless Steel Water-Tight Trough |
| Exhaust Fan | 3 kW, 380 V / 50 Hz, Variable-Frequency Drive, ≥8000 m³/h Capacity |
| Burner | Dual-Orifice Copper Burner, Heat Output Adjustable from 5.3 MJ/min (UL 910 baseline) up to 100 MJ/min via Mass Flow Control |
| Ignition System | High-Voltage Spark Igniter (44 kV / 50 mA, Minimum Electrode Voltage 1.8 kVp) |
| Pressure Monitoring | Differential Pressure Sensor, Range 0–250 Pa, Accuracy ±0.5 Pa (System Accuracy ±2 Pa) |
| Temperature & Smoke Signal Acquisition | 1 Hz Sampling Rate, Linearized Photometric Smoke Density Detection |
| Gas Control | 316 Stainless Steel Mass Flow Controller, Propane Range 0–2.3 g/s, Accuracy ±1% FS (0.6–2.3 g/s), Repeatability ±0.5% FS, NIST-Traceable Calibration |
| Software | Integrated Test Management Platform with Real-Time Logging of Airflow Velocity, Chamber Temperature, Optical Density, and Fuel Consumption |
| Auxiliary Systems | Municipal Water Supply Interface, Methane Gas Delivery Subsystem, Overhead Hoist for Sample Handling |
| Sample Mounting | Stepped Access Platform with Integrated Support for Calcium Silicate Cover Boards |
| Thermal Insulation | High-Temperature Ceramic Fiber Blanket within 304 Stainless Enclosure |
| Application Domain | Horizontal Cable Tray Fire Propagation Testing per UL 910/NFPA 262 for Plenum-Rated Communications Cables |
| Brand | MOTIS |
|---|---|
| Origin | Shanghai, China |
| Model | UIC-4 |
| Construction | Copper alcohol cups (4 pcs) |
| Test Angle | 45° sample support fixture (1 set) |