NewOpto
Filter
Showing all 30 results
| Brand | NewOpto |
|---|---|
| Origin | USA |
| Model | 473-10-100 |
| Wavelength | 473 nm |
| Pulse Energy | 10 µJ |
| Pulse Width | 2.5 ns |
| Repetition Rate | 100 Hz |
| Spectral Bandwidth | 0.2 nm |
| Output Type | Q-switched, TEM₀₀ |
| Cooling | Air-cooled |
| Beam Diameter (1/e²) | ~0.8 mm |
| Beam Divergence (full angle) | <1.5 mrad |
| Polarization | Linear, >100:1 |
| Power Supply | 100–240 VAC, 50/60 Hz |
| Compliance | CE, RoHS, FDA 21 CFR Part 1040.10 (Laser Product Safety) |
| Brand | NewOpto |
|---|---|
| Origin | USA |
| Type | Optical Instrument Component |
| Model | Auto-Balanced Detector |
| Wavelength Range | 400–1070 nm / 800–1700 nm / 900–1650 nm |
| Common-Mode Rejection Ratio (CMRR) | ≥50 dB (typ.), >21 dB @ 300 MHz (Model 1837) |
| Bandwidth (–3 dB) | 125 kHz / 125 kHz / 1 GHz (12 dB compression, Model 1837) |
| Rise Time | 3 µs / 3 µs / <1 ns |
| Max Conversion Gain | 5.2×10⁵ V/W / 1×10⁶ V/W / >30,000 V/W |
| Peak Responsivity | 0.5 A/W / 1 A/W / 0.75 A/W |
| Max Transimpedance Gain | 1×10⁶ V/A / 1×10⁶ V/A / >40,000 V/A |
| Output Impedance | 100 Ω / 100 Ω / 50 Ω |
| NEP | 3 pW/√Hz / 3 pW/√Hz / 15 pW/√Hz |
| Saturation Power (CW) | 1 mW / 0.5 mW / 1 mW (per input) |
| Detector Active Diameter | 2.5 mm / 1 mm / N.A. |
| Optical Input | FC & free-space / FC & free-space / FC/APC, single-mode |
| Output Connector | Male BNC / Male BNC / SMB |
| Power Supply | ±15 V, <300 mA / ±15 V, <300 mA / ±15 V, 200 mA |
| Brand | NewOpto |
|---|---|
| Model | DPSSL-473 / DPSSL-532 / DPSSL-671 / DPSSL-1064 |
| Wavelength | 473 nm, 532 nm, 671 nm, 1064 nm |
| Output Power | 5–3000 mW (model-dependent) |
| Spatial Mode | TEM₀₀, M² < 1.2 (standard), < 2.0 (high-power variants) |
| Linewidth | < 0.1 nm |
| Polarization Ratio | 100:1, linear |
| Beam Diameter (1/e²) | 1.5–3.0 mm |
| Beam Divergence | 0.5–2.0 mrad |
| Power Stability | ±3% to ±5% over 2–4 hrs |
| Warm-up Time | < 1–5 min |
| Operating Temperature | 20–30 °C |
| Storage Temperature | 10–50 °C |
| Lifetime | ≥10,000 hours |
| Operation Mode | CW or analog/digital modulation |
| Brand | NewOpto |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Optical Component |
| Model | First Sensor Series 8/9/10/11/12 |
| Component Type | Semiconductor Photodetector |
| Spectral Range | 360–1100 nm |
| Packaging | TO-5, TO-52, TO-5i, TO-8, LCC6.1, SOJ22GL, BGA, DIL18 |
| Active Area | Ø0.1–Ø5.0 mm (0.008–19.63 mm²) |
| Gain (M) | Up to 100 |
| Dark Current | 0.05–60 nA (dependent on series and bias) |
| Rise Time | <0.18–3 ns |
| Bandwidth | Up to 3 GHz (Series 12) |
| Compliance | RoHS, REACH, ISO 9001-certified supply chain |
| Brand | NewOpto |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | IRviewer1700 |
| Spectral Sensitivity Range | 350–1700 nm (extended to 2000 nm with optional filter configuration) |
| Peak Sensitivity | ~800 nm |
| Focal Range | 0.1 m to infinity |
| Resolution | 60 line pairs per millimeter (lp/mm) |
| Field of View | 40° (with standard Infragon 25 mm f/1.0 lens) |
| Magnification | Approx. 1:1 |
| Lens Mount | C-mount compatible (standard 25 mm Infragon f/1.0 lens included |
| Illumination | Integrated 900 nm LED illuminator |
| Compliance | Designed for alignment and visualization in laser safety-compliant workflows (IEC 60825-1 Class 1/Class 1M environments when used with appropriate attenuation) |
| Brand | NewOpto |
|---|---|
| Model | LDM-405 / LDM-445 / LDM-635/638 / LDM-650 |
| Wavelength | 405±5 nm, 445±5 nm, 635±5 nm / 638±5 nm, 650±5 nm |
| Spatial Mode | Near TEM₀₀ (405/445 nm), Multimode (635/638/650 nm) |
| Output Power | 10–200 mW (405 nm), 100–1000 mW (445 nm), 200–800 mW (635/638 nm), 250–900 mW (650 nm) |
| Operation Mode | CW or Analog/Modulated |
| Beam Diameter (1/e²) | 4.0 mm (405/635/638 nm), 2×4 mm (445 nm), 5.0 mm (650 nm) |
| Beam Divergence | ≤0.5 mrad (405 nm), <3×0.5 mrad (445 nm), ≤2 mrad (635/638 nm), 1.5 or 3 mrad (650 nm) |
| Power Stability | <3% over 4 hrs (405/445 nm), <3% over 2 hrs (635/638/650 nm) |
| Warm-up Time | <2 min |
| Operating Temperature | 20–30 °C |
| Storage Temperature | 10–50 °C |
| Lifetime | 10,000 hrs (405/445 nm), 5,000 hrs (635/638/650 nm) |
| Brand | NewOpto |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | LLS-LEDs |
| Light Source Type | Solid-State LED |
| Illumination Mode | External Illumination |
| Connector Type | SMA 905 |
| Wavelength Range | 240 nm – 2100 nm |
| Spectral Options | UV, Visible, NIR, Broadband White (3000K–6500K CCT) |
| Coupling | FC/PC or SMA fiber-coupled output |
| Compliance | RoHS-compliant construction, CE-marked for laboratory use |
| Brand | NewOpto |
|---|---|
| Origin | Zhejiang, China |
| Model | LSD-UV |
| Optical Density (OD) | ≥6 @ 100–400 nm |
| Visible Light Transmittance (VLT) | 90% |
| Spectral Protection Range | 100–10,600 nm |
| Compliance | EN 207:2023, ANSI Z136.1-2022, CE Marked |
| Regulatory Classification | Class 1 Laser Protective Equipment |
| Brand | NewOpto |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | NewOpto Lasers |
| Core Technology | Monolithic Nd:YAG/Nd:YVO₄-based Passive Q-Switching |
| Key Specifications | Single Longitudinal Mode (SLM), Polarization Ratio >100:1, Spectral Linewidth ≤0.2 nm (FWHM), Repetition Rates from Single-Shot to 100 kHz, Pulse Widths from 350 ps to 2.5 ns, Output Wavelengths at 266, 355, 473, 532, 946, and 1064 nm |
| Package Options | SP (Standard Package), FP2 (Fiber-Pigtailed Compact Module), TO3 (TO-Can Style), ILM (Integrated Laboratory Module with Controller, Power Supply & Housing) |
| Dimensions | SP: 167.1×88.9×73.9 mm |
| FP2 | 50.5×34.0×25.5 mm |
| TO3 | 39.2×26.0×33.8 mm |
| ILM | 1315.0×114.3×86.4 mm |
| Brand | NewOpto |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | newopto |
| Central Wavelengths | 1.0 μm, 1.3 μm, 1.5 μm, 1.6 μm |
| Output | Polarization-Maintaining (PM) Fiber |
| Output Power | 10–1000 mW |
| Linewidth | 1–1000 kHz |
| Tuning Range | 0–3 nm |
| Wavelength Stability | ±1 pm |
| Power Stability | ≤1% (RMS, 8 hrs) |
| Frequency Modulation Bandwidth | <0.1 GHz (amplitude), 10 Hz–100 kHz (repetition rate) |
| Frequency Noise | <300–500 Hz/√Hz @ 1 Hz |
| Intensity Noise | <−130 dB/Hz @ 1 Hz |
| Operating Temperature | 0–50 °C |
| Power Supply | 110–240 VAC, 50–60 Hz |
| Power Consumption | <2 W (per channel) |
| Dimensions | 326 × 161 × 78 mm³ |
| Weight | 1.5 kg |
| Brand | NewOpto |
|---|---|
| Origin | Zhejiang, China |
| Type | Gas Laser Source |
| Wavelength | 633 nm |
| Output Power | 3.0 mW |
| Polarization | Linear (POL) |
| Beam Mode | TEM₀₀ |
| Operating Voltage | 230 V AC |
| Cooling | Air-Cooled |
| Lifetime | ≥20,000 hours |
| Warm-up Time | <15 min |
| Beam Diameter | ~0.65 mm |
| Divergence | <1.5 mrad |
| Stability (Power) | ±1% over 8 hrs |
| Frequency Stability (for stabilized variants) | <±1 MHz |
| Compliance | CE, RoHS |
| Mounting | Standard Ø25.4 mm kinematic base compatible |
| Brand | NewOpto |
|---|---|
| Origin | Zhejiang, China |
| Model | NR-Series Reflectance Probe |
| Wavelength Ranges | 190–2200 nm (model-dependent) |
| Core Diameters | 200 µm, 400 µm, or 600 µm |
| Fiber Configuration | 6 illumination fibers + 1 collection fiber |
| Connector Types | SMA 905 (standard), customizable |
| Housing Material | Stainless steel or anodized aluminum |
| Operating Temperature | −10 °C to +60 °C |
| IP Rating | IP54 (standard), optional IP67 |
| Brand | NewOpto |
|---|---|
| Model | NY-Series Y-Branch Fiber |
| Core Diameter | 200/400/600 µm |
| Wavelength Range | 190–2200 nm (UV-VIS-NIR-BW variants) |
| Length | 2 m (standard), customizable (0.5/1/2 m) |
| Jacket Material | Plastic or Metal |
| Connector | SMA905 (standard), optional FC/ST |
| Spectral Transmission | Optimized per grade (UV, VIS, NIR, Broadband) |
| Numerical Aperture | 0.22 (typical, silica-based step-index) |
| Operating Temperature | −40 °C to +85 °C |
| Compliance | RoHS-compliant construction, ISO 9001-manufactured components |
| Brand | NewOpto |
|---|---|
| Model | OEM Lasers |
| Type | Semiconductor Laser Source for Integration |
| Origin | Zhejiang, China |
| Wavelength Range | 405–1342 nm |
| Output Power | 10–500 mW (model-dependent) |
| Spectral Linewidth | <0.1 pm to <2 nm |
| Long-Term Power Stability | <1–2% (RMS, 8h) |
| Wavelength Accuracy | ±0.1 nm to ±3 nm |
| Operating Temperature | 15–35 °C |
| Cooling | Conductive / TEC-stabilized (depending on variant) |
| Modulation | Analog & TTL (optional) |
| Beam Diameter (1/e²) | 0.8–1.2 mm |
| M² | <1.3 |
| Polarization Ratio | >100:1 |
| Interface | SMA905 or FC/PC fiber coupling (customizable) |
| Compliance | RoHS, CE (Laser Class 3B/4 per IEC 60825-1) |
| Brand | NewOpto |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Model Series | Polaronyx MERCURY, URANUS, PLUTO |
| Core Technology | Mode-locked Er/Yb-doped fiber oscillator + amplifier architecture |
| Wavelength Range | 480–2050 nm (fundamental + harmonic outputs) |
| Pulse Duration | <100 fs to <1000 fs (model-dependent) |
| Repetition Rate | 10 kHz – 100 MHz (fixed or tunable per platform) |
| Average Power | >20 mW to >5 W |
| Pulse Energy | >10 nJ to >50 µJ |
| Polarization | Polarized (PM-fiber-coupled) or unpolarized options available |
| Harmonic Generation | Optional SHG (2ω), THG (3ω), FHG (4ω) modules for UV–visible extension |
| Compliance | CE, RoHS, FDA 21 CFR Part 11-ready software interface (via optional control suite) |
| Brand | NewOpto |
|---|---|
| Model | QP45-Q |
| Active Area | 6.7 × 6.7 mm² |
| Quadrant Configuration | Four electrically isolated, radially symmetric photodiode segments separated by a narrow gap (≤20 µm) |
| Spectral Range | Optimized for 1064 nm (high-responsivity InGaAs or Si-based epitaxial structure) |
| Reverse Bias | Up to 150 V |
| Dark Current | ≤3 nA per quadrant (at 150 V, 25°C) |
| Rise Time | ≤5 ns (50 Ω load) |
| Package | Hermetically sealed TO-8S metal can with quartz window |
| Operating Temperature | –10°C to +60°C |
| Compliance | RoHS-compliant, ISO 9001-manufactured components |
| Brand | NewOpto |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Quantas Q1-1053 / Q2-1053 |
| Light Source Type | Infrared Pulsed Solid-State Laser |
| Illumination Mode | External Illumination |
| Wavelength | 1053 nm (1047 nm optional) |
| Fundamental Output Energy | 5–70 mJ |
| Harmonic Outputs | 527 nm (2–35 mJ), 351 nm (1–20 mJ), 263 nm (0.6–11 mJ), 211 nm (0.15–3.5 mJ) |
| Repetition Rate | 10 Hz (factory-fixed) |
| Pulse Width | < 8 ns |
| Pulse-to-Pulse Energy Stability | < 1 % rms (Q1), < 0.7 % rms (Q2) |
| Power Drift | ±3% |
| Beam Profile | Near TEM₀₀, >75% Gaussian |
| Beam Divergence | < 3 mrad (Q1A) to < 1.5 mrad (Q1C/Q1D) |
| Beam Diameter | 1.2–3.0 mm |
| Polarization | Linear, horizontal |
| Optical Jitter | < 1 ns rms |
| Laser Head Dimensions | 113 × 230 × 112 mm (Q1), 113 × 400 × 112 mm (Q2-1053) |
| Harmonic Generator | 113 × 242 × 112 mm |
| Controller Unit | 85 × 165 × 50 mm |
| Power Adapter | 50 × 125 × 32 mm |
| Operating Environment | 15–30°C, 10–80% RH (non-condensing), 90–230 VAC, 30 W, 47–63 Hz |
| Brand | NewOpto |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | SF-LASER Series |
| Core Technology | Diode-Pumped Solid-State (DPSS) Single-Longitudinal-Mode Laser |
| Wavelength Range | 266 nm – 1064 nm |
| Output Power Range | 6 mW – 3000 mW (wavelength-dependent) |
| Spectral Linewidth | < 0.15 nm (for visible/NIR diode-pumped microchip lasers) to < 0.5 MHz (for stabilized DPSS lasers) |
| Power Stability | ≤ 0.5% RMS (for microchip variants), ≤ 2% RMS (for high-power DPSS configurations) |
| Operating Mode | Continuous Wave (CW) |
| Cooling | Conductive and/or Thermoelectric (TEC) |
| Beam Quality | TEM₀₀, M² < 1.1 |
| Polarization | Linear, >100:1 extinction ratio |
| Brand | NewOpto |
|---|---|
| Model | SL-01 / SL-02 |
| Wavelength | 633 nm |
| Output Power | >1.2 mW (SL-01), >2.4 mW (SL-02) |
| Polarization Ratio | >800:1 |
| Spatial Mode | TEM₀₀ |
| Beam Diameter | 0.63 mm |
| Beam Divergence | 1.3 mrad |
| Warm-up Time | <10 min |
| Frequency Stability (1 min) | ±2×10⁻⁹ (freq. stabilized mode) |
| Frequency Stability (1 hr) | ±5×10⁻⁹ |
| Frequency Stability (8 hr) | ±1×10⁻⁸ |
| Intensity Stability (1 min) | ±0.1% (intensity stabilized mode) |
| Intensity Stability (1 hr) | ±0.2% |
| Thermal Frequency Drift | <2 MHz/°C |
| Linewidth | <1 MHz (typical, single longitudinal mode) |
| Brand | NewOpto |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | newopto |
| Pricing | Available Upon Request |
| Wavelength Range | 305–2100 nm |
| Mode Field Diameter | 3.0–13.0 µm (wavelength-dependent) |
| Connector Types | FC/PC, FC/APC, FC/PC–FC/APC hybrid, FC/PC–SMA hybrid |
| Standard Lengths | 1 m, 2 m, 5 m, 10 m |
| Optional Coating | Broadband AR-Coating for Enhanced Transmission |
| Brand | NewOpto |
|---|---|
| Origin | USA |
| Model | SR810 / SR830 |
| Frequency Range | 1 mHz to 102.4 kHz |
| Dynamic Reserve | >100 dB |
| Phase Resolution | 0.01° (front panel), 0.008° (computer interface) |
| Time Constants | 10 μs to 30 ks (6/12/18/24 dB/oct rolloff) |
| Input Sensitivity | 2 nV to 1 V (voltage), 10⁶ or 10⁸ V/A (current) |
| Voltage Noise | 6 nV/√Hz @ 1 kHz |
| Current Noise | 0.13 pA/√Hz @ 1 kHz (10⁶ V/A), 0.013 pA/√Hz @ 100 Hz (10⁸ V/A) |
| Gain Accuracy | ±1 % (±0.2 % typical) |
| Stability | <5 ppm/°C |
| Reference Output Distortion | –80 dBc (<10 kHz), –70 dBc (>10 kHz) |
| Internal Oscillator Accuracy | 25 ppm + 30 μHz |
| Harmonic Detection | up to nF ≤ 102 kHz (n < 19,999) |
| Data Buffer | SR810 — 8 k points |
| Interface Standard | IEEE-488.2 (GPIB) and RS-232 |
| Power | 40 W, 100–240 VAC, 50/60 Hz |
| Dimensions | 43.2 × 13.3 × 49.5 cm (W × H × D) |
| Weight | 10.4 kg (23 lbs) |
| Warranty | 1 year parts and labor |
| Brand | NewOpto |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | Tunable External-Cavity Diode Laser (ECDL) |
| Light Source Type | Tunable Single-Frequency Semiconductor Laser |
| Illumination Mode | External Illumination |
| Wavelength Options | 780 nm, 852 nm |
| Output Power | Up to 30 mW (diode-dependent) |
| Linewidth (FWHM) | Typically <150 kHz |
| Tuning Range | Typical 10 nm per diode configuration |
| Tuning Mechanism | Cat’s-eye retroreflector + ultra-narrowband interference filter (replacing alignment-sensitive diffraction gratings) |
| Brand | NewOpto |
|---|---|
| Wavelength Range | 200–1100 nm |
| Core Diameter | 200 µm, 400 µm, 600 µm, or 1000 µm |
| Length | 2 m (custom lengths: 0.5 m / 1 m / 2 m) |
| Jacket Material | Plastic or Metal-Braided |
| Connector Type | SMA905 |
| Numerical Aperture | ~0.22 (typical for UV-grade silica fiber) |
| Operating Temperature | −40 °C to +85 °C |
| Compliance | RoHS-compliant construction |
| Fiber Type | High-OH synthetic fused silica (UV-optimized) |
| Brand | NewOpto |
|---|---|
| Origin | Zhejiang, China |
| Model | NewOpto-LEDs |
| Wavelength Range | 225–350 nm |
| Output Power Options | 1–3 mW, 3–5 mW, 10–15 mW, 30–50 mW |
| Emission Window Types | Flat or Hemispherical |
| Spectral FWHM | 12 nm (255 nm), ±5 nm (255–315 nm), ±10 nm (330–350 nm) |
| Package Formats | TO-39, TO-3, LCC |
| Drive Current | 80–900 mA |
| Illumination Mode | External (free-space) |
| Optional Accessories | Constant-current drivers (UVCLEAN-PS-DC-C), pulsed power supplies (UVCLEANPPS1μs/1A, UVCLEANPPS10ns/5.5A), SMA-fiber-coupled and pigtail configurations |
| Multi-wavelength Modules | 8-channel (TO-3), 12-channel (TO-5), 24-channel (LCC) |
| Brand | NewOpto |
|---|---|
| Type | Volume Bragg Grating (Transmission) |
| Center Wavelengths | 375, 405, 658, 780, 785, 794.7, 808, 885, 920, 938, 976, 981, 1064, 1532, C-band (1530–1565 nm) |
| Wavelength Tolerance | ±0.5 nm |
| Wavelength Drift | ≤0.2 nm |
| FWHM Bandwidth | 0.03–1 nm |
| Thermal Coefficient | 0.01 nm/°C |
| Diffraction Efficiency | 5–98% (typical >99.9% for optimized designs) |
| Reflectivity Tolerance | ±5% |
| Grating Slant Angle | <1° (customizable) |
| Standard Thickness | 0.3–3 mm |
| Custom Thickness Range | up to 30 mm |
| Standard Aperture | 0.5–25 mm |
| Substrate Material | Photo-thermo-refractive (PTR) glass |
| Polarization Sensitivity | Low (designed for unpolarized or linearly polarized input) |
| Damage Threshold | >5 J/cm² (ns pulses), >1 kW/cm² (CW, 1064 nm) |
| Brand | NewOpto |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Optical Component |
| Model | WPP5 / WPP10 |
| Material | Tellurium Dioxide (TeO₂) |
| Extinction Ratio | <1:10⁵ |
| Laser Damage Threshold | 200 MW/cm² (1064 nm, 12 ns, 1 Hz) |
| Surface Quality | 20/10 Scratch-Dig |
| Flatness | λ/4 @ 633 nm |
| Beam Separation Angle | 5° (WPP5) or 10° (WPP10) @ 633 nm |
| Length-to-Aperture Ratio (L/A) | 0.5–1.0 (WPP5), 0.8–1.2 (WPP10) |
| Brand | NewOpto |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Instrument |
| Model | YAG Diode-pumped Q-switched Lasers |
| Core Components | Diode-pumped solid-state (DPSS) laser system with integrated harmonic generation options |
| Wavelength | 1064 nm (fundamental), with optional harmonics at 532 nm, 355 nm, 266 nm, and 213 nm |
| Pulse Energy (1064 nm) | 4 mJ to 1400 mJ depending on model configuration |
| Repetition Rate | Single-shot to 100 Hz (model-dependent) |
| Pulse Width (FWHM) | 6–18 ns |
| Beam Profile | Near TEM₀₀, Gaussian content >75% |
| Beam Divergence | ≤1.3 mrad (high-end models) |
| Polarization | Linear, horizontal |
| Pulse-to-Pulse Energy Stability | ≤0.7 % rms (Q2 series), ≤2.5 % rms (LQ-series amplifiers) |
| Timing Jitter (external trigger) | ±1 ns rms |
| Cooling | Air-cooled or self-contained water-to-air cooling |
| Interface | RS232 |
| Compliance | Designed for integration into ISO/IEC 17025-compliant analytical workflows |
| Brand | NewOpto |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | NewOpto-XX |
| Price Range | USD 140 – 4,300 (based on configuration) |
| Wavelength Options | 375, 445, 473, 488, 515, 640, 660 nm |
| Wavelength Tolerance | ±5 nm |
| Output Power | 25–100 mW |
| Beam Divergence (full angle) | <1.1–1.7 mrad |
| Spatial Mode | TEM₀₀, M² < 1.2 |
| Beam Diameter at Aperture | 0.8 mm or 1.2 mm |
| Beam Ellipticity (Symmetry) | >0.90:1 |
| Intensity Noise (20 Hz–20 MHz, RMS) | <0.1% |
| Power Stability (8 h) | <1% (typ.), <0.1% (with TEC stabilization) |
| Spectral Linewidth (FWHM) | <1.2 nm (narrow-line variants), <2 nm (standard) |
| Polarization Extinction Ratio | >100:1 |
| Digital Modulation Bandwidth | DC–150 MHz |
| Digital Rise/Fall Time | <2.5 ns |
| Analog Modulation Bandwidth | DC–2 MHz |
| Analog Rise/Fall Time | <200 ns |
| Remote ON/OFF Bandwidth | DC–500 kHz |
| Rise/Fall Time (ON/OFF) | <500 ns |
| Max. Baseplate Temperature | 50 °C |
| Total Power Consumption | <10 W |
| Communication Interface | RS-232 or USB |
| CDRH Compliance | Yes (Class 3B/4 per model) |
| Warranty | 12 months |
| Brand | NewOpto |
|---|---|
| Model | Off-Axis Parabolic Mirror |
| Origin | Zhejiang, China |
| Component Category | Optical Element |
| Coating | Protected Aluminum (Al + SiO₂) |
| Surface Accuracy | λ/4 @ 633 nm (typical) |
| Surface Quality | 20–10 scratch-dig |
| Clear Aperture | ≥90% of nominal diameter |
| Focal Length Range | 25 mm to 500 mm (custom available) |
| Off-Axis Distance | 5 mm to 150 mm (configurable) |
| Substrate Material | Fused Silica or BK7 (standard) |
| Brand | NewOpto |
|---|---|
| Origin | Russia |
| Model | THz Waveplate |
| Retardation Types | λ/2, λ/4 |
| Operating Wavelength Range | 30–1000 µm |
| Substrate Material | THz-Grade Crystal Quartz |
| Orientation | x-cut |
| Orientation Tolerance | ±10 arcmin |
| Standard Dimensions | 20×20 mm, 50×50 mm |
| Max. Dimensions | 60×60 mm |
| Dimensional Tolerance | ±0.25 mm |
| Thickness Tolerance | ±5.0 µm |
| Clear Aperture | ≥90% |
| Parallelism | ≤5 arcmin |
| Surface Quality | 60/40 (scr/dig) |
| Wavefront Distortion (WFD) | λ/2 @ 633 nm |